Database Users

Toggling touch-screen on/off

Does anyone know a software that can toggle touch-screen feature on/off on Magitians?
I don't mean blanking the screenduring a call, but rather a program that blocks screen tapping. I want to operate my S110 with buttons without worrying about accidental screen touches.

Hi
You can always use TPenable.exe and TPdisable.exe from any Extended ROM.
Good luck

Thanks but... TPDisable.exe disables all buttons also. So, it doesn't work for me.

Hi, do a search for "mortsaver".

I know MortSaver. This program turns screen off entirely, not only touch-screen feature. So, doesn't work for me either.

amed said:
I know MortSaver. This program turns screen off entirely, not only touch-screen feature. So, doesn't work for me either.
Click to expand...
Click to collapse
As far i understud, you can configurate it to do what ever you need:
"What is it good for?
MortSaver is a combination of screensaver, keylock, and a "stay off!" function.
Screensaver:
The display's turned off, but the PPC keeps running (e.g. for audio players). In spite to other tools, MortSaver turns off the dispay again if it's been switched on by e.g. an alert or the on/off button.
Keylock: All buttons (except the one necessary for deactivation, of course) are locked, as far as it's possible to me. A few programs sadly use some undocumented tricks, which allows them to get the button presses even if they're assigned to MortSaver in the system, or set themselfes as topmost window, by which the direction pad keys will be sent to this window. Disabling MortSaver can be done either with one button or a sequence of two buttons.
"Stay off!": PocketPCs are often switched on by themselves or accidentally - by alerts (appointments, SMS, ...) or accidental button presses in your pocket. In those cases, MortSaver can turn off the device again after a selectable timespan (so you recognize MortSaver's active and the device alive).
After power on or system-caused disabling of the screensaver, MortSaver shows a countdown until the screen or device (depending on settings, also see instructions), the button(s) to deactivate it, the time, battery level, a user definable text (e.g. owner infos), and on Phone Edition devices also signal strength and hints about missed calls and SMS."
Source Official mortsaver web page:
http://www.sto-helit.de/modules/edito/content.php?id=36

I am not saying that Mortsaver does not deliver what promises. Simply I am looking for something different.
To rephrase what I need in other words:
1/ having screen on (to see what is on the screen)
2/ having device making no reaction on screen taps
3/ having all button working (slider, power, application)
I've configured my S110 to operate and run everything I need on the run by one hand using just buttins. But quite often accidental touch by finger or cloth (when I pulling it of the pocket or putting it back) stops what I run or making a second call to the person I've just talked.

Ok, now i get your meaning. Perhaps yo can ask directly to mort developer as i did many times at his own email witch you can find at his web page.

Look for Pocketmax ScreenGuard works perfectly. Costs some money though.

ScreenGuard ( http://www.pocketmax.net/screenGuard.htm ) still locks the buttons, though? Except for the green call button - and then only when you also use their PhoneAlarm app.

ScreenGuard falls close to what I am looking to. But it locks buttons and couple of times it locked "too good" - I couldn't unlock my device and needed to HR.

maybe u want to try this...
assign it to any button to lock....
to unlock, hold record button and calendar button...
i assigned it to record button for easy usage...
cheers...

nonentity said:
maybe u want to try this...
assign it to any button to lock....
to unlock, hold record button and calendar button...
i assigned it to record button for easy usage...
cheers...
Click to expand...
Click to collapse
But this one also turns screen off :-(

Lock buttons/touchscreen when playing MP3s?

The Wizard has the option, when it is in...ummm...standby(?) mode (i.e., when you push the power button), to only return to normal mode when you press the power button. In other words, the other hardware buttons, let alone the touchscreen, do nothing.
What I'm interested in is a way of doing something similar, but when I'm using it as an MP3 player. The various Wizard cases I've tried are all too snug, so putting the Wizard back in the case after starting up the MP3 player bumps buttons or the screen and causes problems (e.g., stops the music).
Are there any tricks to restricting input for cases like this? Ideally, from my standpoint, the device would accept user input when either the middle button of the D-pad is pushed, or if a call comes in (so the call can be accepted).
Thanks!

You can try using the WM5 Today's lock device plugin. There are various other software that utilize (similate) this lock feature. Do a search.

hanmin said:
You can try using the WM5 Today's lock device plugin. There are various other software that utilize (similate) this lock feature. Do a search.
Click to expand...
Click to collapse
Hanmin, I do exactly as you suggested but I wonder if is there a more efficient way to lock the device especially with media player on top. I use the Treo case which actually has a hole for the headphone jack in the proper location for the k-jam, however, one has to thread the headphone through the case, start one's music, bring up the today screen, and then lock the device. If one could have the option of placing lock the device on the start menu as opposed to having it only on the today's screen that to me may be a big help, and then as you come out of unlocking the device, you would be right there at the media player.
What I'm afraid of is one time while I'm fidgeting to get the device into the case and coordinate the starting/locking of music, I'll drop the device on the NYC subway platform and watch it dash on to the tracks as a subway is on coming :roll:

Try deltaLock I use it together with WMP10 and wired/bt headsets.

Would it help if you could map the device lock to a button?
Armstrom has made a great program for that:
http://www.mr2-power.com/downloads/DeviceLock.CAB
You don't have to go back to the today screen at all, just press the button you mapped it to.

you can also assign a button to sreen on/off in Windows Mediaplayer itself! Then you can use the d-pad buttons (that's what you wanted not?) to adjust volume and select next and previous, however you screen is blacked out, so the touchscreen will not work and power consumption drops. Ideal for use as MP3 player.
WM Player > Menu > Options > Buttons > Screen on/off, > assign e.g. the middle button.

1-2tje said:
WM Player > Menu > Options > Buttons > Screen on/off, > assign e.g. the middle button.
Click to expand...
Click to collapse
There is a bug in WMP10 on WM5 that prevents this from being assigned to buttons other than dpad though correct? Anyone have a fix for this yet? I like having up/down for volume, right/left for track, and middle button for play/pause.

device lock works without any problems

SBouri said:
device lock works without any problems
Click to expand...
Click to collapse
Yeah but... that means the button will always be a lock. What I used to do on previous pocketpc was have a button that launched WMP. Once WMP is running, that button now becomes the screen lock.

Itesla, you can still have your up down left right and enter dpad control, as you can assign two functions to each button. A press and a press and hold (except the middle button). When it asks you to press a button, just hold up or down (left and right hold are assigned to rewind and fast forward). I have down hold set to fullscreen and up hold set to the lock.
Alternitavely, you could use the press up down for a button lock, and just use the volume slider
Hope this helps
PS I'm posting this on my wizard from the comfort of my bed :lol: Ahh the glories of Wifi... I'm just a bit overhappy because I've finally got it working.

1-2tje said:
you can also assign a button to sreen on/off in Windows Mediaplayer itself! Then you can use the d-pad buttons (that's what you wanted not?) to adjust volume and select next and previous, however you screen is blacked out, so the touchscreen will not work and power consumption drops. Ideal for use as MP3 player.
WM Player > Menu > Options > Buttons > Screen on/off, > assign e.g. the middle button.
Click to expand...
Click to collapse
Thanks 1-2tje, your suggestion was dead on. Eb

Disable hardware buttons for incoming call

Anyone know how to disable the hardware buttons for the incoming call screen?
I only want to answer/reject calls with the slider, not the hardware buttons as I sometimes touch them by accident while getting the phone out of my pocket.
I've tried PocketShield but didn't like it, although it was able to disable the hardware buttons. Any other suggestions?

Have you already tried s2u2? The slider can receive/reject incoming calls and you also have options to disable the hardware buttons. Works great on my elf.

I tried it some days ago, couldn't get it to work the way I wanted it to, mainly because I don't want to use the locking part. I always lock my device with the power button and I only wanted to have the ability to disable the hardware buttons for incoming calls.
After your message, I decided to install it again and give it another try. Changed some of the settings and I think I finally managed to get it working the way I want to!
It's a bit of a memory consuming app for just disabling the hardware buttons for incoming calls, but hey, it works
Thanks!
If anyone finds a solution without using S2U2, please let me know!

Ok, I have uninstalled S2U2 again. Even though it did do the job, it was also a memory consuming application just for disabling the answer/reject keys during incoming calls and I want to keep my device as clean as possible.
I have searched for hours trying to find a solution to this what I think is a very common problem. How many of you have accidentally accepted or rejected calls because of the hardware buttons? In my opinion, HTC should have thought about this and provide a solution for it.
Anyone with a better solution than S2U2?
Thanks for your input!

New version 1.40 of S2U2 uses MUCH less battery. I almost don't notice, it's running. Great program at least for me.

Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.

can you tell me how you have set your settings for just disabling the hardware buttons for incoming calls in s2u2 ? Thanks

I've used AE Button Plus to disable the 'Answer Call' an 'End Call' hardware keys as I had the same annoying problem of accidentally rejecting a call when taking the device out of my pocket. This works well for me and have now enabled the keys to turn wifi and bluetooth off and on with 3 taps.

Thanks everyone!
I wasn't aware of the latest S2U2 version and I almost gave it another try until I read Anfloyd's post.
I did look at AE Button Plus before, but didn't think it was capable of doing what I wanted: disable the hardware buttons during incoming calls, but still have them functional when there isn't an incoming call (such as showing the phone dial screen which it does by default).
When I looked at the AE Button Plus website, I noticed I couldn't configure the buttons based on the current active screen/program. So, even though I knew I could disable the hardware buttons, I thought I would then loose the whole functionality of them..and that would make the answer and reject buttons on my device useless.
BUT, after reading your message Anfloyd, it got me thinking..I don't need to configure it based on the current screen/program. I can just disable the buttons for 1 tap..and assign programs for them for 3 taps for example.
So, now I have this:
- 1 tap: do nothing. This way, both the answer and reject buttons are not working during incoming calls and I can only use the slider to accept/reject calls.
- 3 taps for answer button: start the phone application.
- 3 taps for reject button: nothing yet, but I'll find something
This is a solution I can work with! I have only tested it for a short time, so if it turns out that AE Button Plus is causing problems I'll give the latest S2U2 another try, but so far this seems to be working just fine.
Thanks again for your input!
ChrisVDD, those options can be found in the S2U2 settings. I don't have S2U2 installed anymore so I don't remember the exact settings. I just disabled all locking features that I didn't need, selected to disable the hardware buttons and chose to use the slider. Give it a try, you should be able to sort it out. If you can't, let me know and I'll install S2U2 again to see what settings you need.

My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display

PhaseIV said:
My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display
Click to expand...
Click to collapse
Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.

Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.
Click to expand...
Click to collapse
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it

GryphonLeon said:
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it
Click to expand...
Click to collapse
Thank you for your fast reply, now It works like I wanted it to do.

Is it possible to end call using red hardware button but not to ignore it before answering? I tried AEBplus and it works like it should but that's not all I needed.

danum said:
Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.
Click to expand...
Click to collapse
The problem I have with s2u2 is that I cannot mute incoming calls... The voulme buttons are locked... the touch screen is locked and mute on face down also does not work....
Maybe A_C will allow us which buttons to lock in the next release...

Volume on Today Screen

Rather than the little speaker at the top, is there a plugin for the today screen to just tap "ringer on / vibrate / ringer off" ?
I know there is one in the HTC Home plugin, but that takes up a large amount of space on the today screen, and would rather not have that showing.
Thanks for the help.

If you goto Settings > System > End Key, you can set it to Vibrate/Ringer On. It's a handy feature, don't know if it'll be exactly what you want though.

Shortcuts for silent, vibrate, one ring etc

Are there shortcuts to activate/deactivate silent mode and vibrate mode or is the menu or volume button the only way? Sometimes I want to increase the volume and switch on vibrate, which doesn't seem possible unless you go into the menu. Also is there a way to set it to one ring only, or beep mode?

You can install any of the "switch mode" widget that you can find in Market, but the fastest way to change suond profile is push the volume down button for more than 2 seconds, phone will put in silent mode, then push once volume up to set it to vibrate. Push volume up for more than 2 seconds to restore full ring

Yep, seems to be the fastest way to change the volume and set silent, a bit annoying that it beeps along the way but no big deal.
But, if you do that to set it on vibrate, it doesn't seem to work for text messages... those stay silent because they have a separate setting to vibrate. WHY?!?!!!
Always seemed like an easy thing on symbian & windows mobile, you hold one button or a couple of clicks later everything is set to vibrate, especially useful if outdoors and can't hear messages.

I just hold down the END key and select "Silent Mode". Is that not an option on your phone?

Check out egg 'n stones' "Profiles" application in the market. You can define and set profiles from the application plus you can create shortcuts to any profile. For every profile you can set the volume of the different types of sounds (alarms, notifications, media, speech, etc.) It's my favourite profile manager.
Cheers.

thanks, i'll check it out

Or just install these widgets from Jerpelea's rom page. You can find the widgets link on the palm pre theme rom, 2nd post http://forum.xda-developers.com/showthread.php?t=538633
There is a really nice 1 button widget that sits on your home screen and you can press it and it cycles between silet, vibrate and ring.
Just allow the phone to accept 'unkown sources' in the application menu. Then access the widgets from the sd card (save them there) and then you can install them.

I have got a wifi, Bluetooth, GPS, brightness & volume widget that all have little blue icons that match downloaded from the marketplace..
there from Rounded Labs.. All free as well

my phone started acting weird lately. I can switch to silent or vibrating mode with the volume button when I first turn on the phone, but after I make one phonecall it stops that function and starts working as a up-down button that can navigate within the menu items and such.
I have checked all of the settings options that might have an affect on this, but couldn't find anything yet.
Any suggestions as for how I can fix this?

Vibrate all??
My volume buttons controlled all the notifications and sounds on my previous Android phones. That is NOT the case on the Samsung Vibrant. It will only control the volume for the incoming call ringer. I would have to go to settings for every notification volume to lower them and set them to vibrate. The only option I've found is t set the volume all the way down to silent on the side of the phone which will silence everything. The problem is, there is ZERO notification whatsoever. No led, no sound, no vibrate.
Isn't there a way to have the volume control all the sounds and vibration mode on the phone as a global setting?