Related
Hello i just upgraded my QTEK from ROM Version 3.14.06 ENG to ROM Version 3.16.13 ENG and from Radio Version T313 to Radio Version 3.19.01. Everything worked fine and the ROM and the RSU were upgraded with success but idnt find any deffrence the device is still the same as for the GPRS i was hopping that when the device goes to standby it wont disconnect. Any idea what are the changes in the new ROM i have installed and the bugs that were fixed. If there is new ROM updates then the one i got from qtek.dk where are theyand will they work on my QTEK 1010 32MB.
Thanks
<flames>
3.16.13 is CRAP
</flames>
)
use 3.15.15 + 4.16
Where can i get them from?
Thanks for your reply, but where can i find those updates and will they work after the current upgrade that i made. Finally will they work on the Qtek 1010.
Thanks
as I said... 3.16.43 is unofficial and I can't share it... 3.15.15 is out there somewhere (use the Search function )
Couldnt find it!
Hi again i can find the new ROM versions that you instructed me to use instead of the ones i download it. Can you provide me with a direct URL to download the 3.15.15 + 4.16 ROM and will they replace the 3.16.13 Version.
Please advise
Thanks
Amer
Re: Couldnt find it!
ARZLEB said:
Hi again i can find the new ROM versions that you instructed me to use instead of the ones i download it. Can you provide me with a direct URL to download the 3.15.15 + 4.16 ROM and will they replace the 3.16.13 Version.
Please advise
Thanks
Amer
Click to expand...
Click to collapse
Interesting. Can you tell me which site you been to that you manage
to upgrade your qtek before?
Sure ,
a while ago you could have found it on www.qtek.dk but for an unkown reason they have removed its link from the main page now you can find here:
http://qtek.dk/software/
Enjoy
:wink:
be careful how you give information
Hi,
Please be very careful how you give out information.
You have screwed up I believe many people who got
their device frozen and cannot be used after trying to
upgrade the ROM and Radio Stack from the website
you provide without warning people of the serious
damage it could cause if the Rom & Radio Stack
upgrade is not from the same source.
It is good that you are trying to help people but I hope
you could continue doing it BUT please give a complete
and proper advise. Hope you get my message.
From
One of the victim
I expect people who buy this device to have a certain amount of IQ. Everybody knows flashing them IS dangerous, so they should know as much as possible on the item.
Before I flashed the device for the first time, I've already read EVERYTHING which is in the ROM Upgrade forum and everything which mentions ROM on this site. I knew which is the best, I knew where to get it, I knew I can screw it up and I knew how to NOT screw it.
It's peoples fault if they brick their units.
i dont know where to start with this but i should agree with Zviratko 100%
we expect people who buy this devices to have a certain amount of IQ and knowledge most of us here are pros.
Please understand that if you dont know what you are dealing with dont bother doing it. Read all the forums and pages of Xda-developers they contain the biggest archives about those products, learn then apply.
Zviratko is one of these important resources learn from him i know i did!
:roll:
Re qtek 1010 rom update
could you please tell me where you got your rom update from. I have been tearing my hair off trying to get the right update. Some genius upgraded using the O2 upgrade and killed his QTEK.
Dear forum
Please help an ignoramous...
I have just bought a 2nd-hand xda and need to unlock it. I've tried following many threads on this excellent forum, but just get wound up in a ball of uncertainty. Can someone confirm that I am about to do the right thing...
I have an xda with the following details:
ROM: 3.02.00 ENG
Date: 05/27/02
Radio: 4.01
Protocol: 324e2
Should I then:
- update to 3.17.03
- run xda-unlock
- then stop worrying?
... or is it not possible to upgrade to 3.17.03 from 3.02.00 (I can't find any instances of 3.02.00 being discussed in the forum)??
Thanx for being patient with me!
Tim
P.S. Are any of you sitting in DK?
Go ahead and do it, but before you do make sure you back up your existing rom, preferably using the sd card method as outlined clearly in the forum, that way you can always get back to the point that you started should a disaster occur.
Thanks cruisin-thru
Then I think that I have understood correctly that I have to use a serial cable and not the usb?..
I can see that another user with the same xda profile (i.e. rom and radio versions) is having battery discharge problems - do you know of why this maybe happening and whether it's related particularly to that rom/radio type?
Regards
Tim
Take my advise having watched this forum for some time.
do not do any thing to your xda if anyone with the same rom as you has had any issue untill they have been sorted and you are happy you wont styuff your xda a well
if there is a user with the same rom as you that pgraded and now has power issues. check what rom they used and from where. and wait untill they are all p and working aain before you try or you could end up the same.
REMEBER MESSING WITH YOU ROM CAN LEAVE YOU WITHOUT A WORKING XDA. and reloading your old rom back on will not fix it you will see this if you read the forums.
Thanks for the advice, techwatch
I just had an idea. What about if I were to upgrade to the "normal" 3.17.03 rom via o2's own homepage and then run the xda-unlock?
Would this then work?
Regards
Tim
Any body knows for xda 1, you can keep checking new mail arrival through GPRS?
I heard people using xda 2 can do that. But is there any chance xda 1 can do the same thing?
Actually, when u do the setting for POP account, it ask u to set how many minutes to check for new messages. But it never work because the GPRS will close automatically.
Thanks very much. :?
Sure it can be done!
Take a look at:
http://www.o2.co.uk/productsservices/xda/romupgrade/0,,170,00.html
BTW the above is one of many!
also where are you located?
HTH
I am using the most updated PPC2002 version already. (3.20.06 ROM and 4.21 Radio)
Do u mean I have to upgrade to PPC2003?
I doubt that because they are not very stable for me to use in Hong Kong so far from other guy's comments in this website.
Thanks very much.
chris_khho said:
I am using the most updated PPC2002 version already. (3.20.06 ROM and 4.21 Radio)
Do u mean I have to upgrade to PPC2003?
I doubt that because they are not very stable for me to use in Hong Kong so far from other guy's comments in this website.
Thanks very much.
Click to expand...
Click to collapse
Since you're already running the latest upgrade its suppose to work but since it doesn't I would have to say that your always-on settings are at fault. So go to Start, Settings, Connections and make sure that its set to not disconnect.
HTH
Are you sure that it is also for xda1 ?
I can't locate that "not disconnect" setting.
Please clarify.
Thanks so much.
chris_khho said:
Are you sure that it is also for xda1 ?
I can't locate that "not disconnect" setting.
Please clarify.
Thanks so much.
Click to expand...
Click to collapse
It should say some thing like this:
GPRS connection to remain active once the device enters power save mode.
At least it does on the PPC 2002 latest AT&T ROM and the XDA developers Special Edition ROM v1.2. (which is bases on the O2 3.17.03 ROM).
HTH
That's really strange for my O2 xda!
I only found a setting called GPRS Suspend Mode setting.
It said,
When you are in power-saving mode, do you want to:
- Keep GPRS connection
- End GPRS connection
I clicked on the first one.
Then I close it, and connect to GPRS.
Just for a while, the connection ends by itself.
Any thought?
Thanks a lot again.
Yeap thats the correct setting and the same one I'm speaking of!
I read a lot of bad reports about the 4.21 radio stack so it might be at fault.
Maybe you should think about upgrading to the Qtec radio stack, heard nothing but good reports on that one.
The Qtek 1010 Radio Stack Upgrade can be found at:
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING.
BTW do you have a URL for that newer o2 ROM, I'd like to install it and see if it does the same for me/
HTH
Here it is.
http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm
BTW, I am a bit nervous to install the radio file cause I have bad experience that almost kill my phone.
Is it really okay just to install the radio file?
chris_khho said:
Here it is.
http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm
BTW, I am a bit nervous to install the radio file cause I have bad experience that almost kill my phone.
Is it really okay just to install the radio file?
Click to expand...
Click to collapse
Like I said I've heard nothing but good reports on upgrading to this radio
stack (no failed upgrades have been reported but as with any upgrade there is always a possibility). :wink:
BTW thanks for the link!
HTH
Hi Qman,
Have u tried to update that ROM?
Is there the same problem?
chris_khho said:
Hi Qman,
Have u tried to update that ROM?
Is there the same problem?
Click to expand...
Click to collapse
Unable to download, it kept asking for a IMEI.
You wouldn't happen to have the direct download link would you?
Oh! I didn't realize that...sorry.
I am still a bit nervous for upgrading (or is it actually downgrading) to the i-mat ROM.
If it is downgrading, I will definitely not try that...
Hi Qman,
I just notice that Yorch.net got the 3.20.06 ROM.
Also they have the 4.00.21 ROM (pre-release T-Mobile version). Is it for the US market only?
Chris
hi; Are you sure that Yorch.net got the 3.20.06 ROM??? Can't find it. I have downgraded my XDA yesterday from the kitchen wm2003 because of bugs to kitchen 2002 but it says 3.17.03 and not the one you mention???!!!
Hey,
That's not from the "kitchen". It's from the "upgrade" just under "kitchen". Check it out again and you will find it.
Anybody knows that 4.00.21 is good for o2 xda?
Chris
hmmm, currently I am using it
so far so good but there is one major BUT for me - most possibly that version makes wipe out my 256MB SD card every up to 48 hours
for me it is a major .... item
regards,
monika
That's terrible. What about the GPRS and phone reception?
To be honest, I won't use it if it will wipe off the sd contents every 2 days.
Have you tried to burn again?
so far GPRS is not working ....
but that is due local GSM provider that has some complicates setup as to make GPRS to work, phone recption is ok ... I am living in area where virtually all GSM phones had reception problems (i.e. majority of nokia phones), although in a city center it is perfect ....
just for you to know ... I have received a link from one of the group members for the most recent update - look there for details :
http://forum.xda-developers.com/viewtopic.php?t=4556&highlight=4+01+00
regards, monika
Thanks very much for your reply.
But I think that Upgrade exe file is for US only cause that include the radio upgrade as well.
So, are you able to downgrade your 4.00.21 easily?
I am not sure whether its worth to downgrade your device to 3.20.06 to see whether its a real problem with SD card. And to upgrade it to 4.00.21 again to verify it. It may happen only at some occasion as you know electronic device can never guarrentee functioning 100%.
Hope you can fix your device.
Cheers
I was looking at the website for "Traffic-I". This is a subscription system for traffic info (and a sort of GPS ?)
The free trial refers to XDA2 not XDA1. I assume that is because the XDA2 has W2003 0n as standard?
Is it possible to upgrade my O/S to 2003. I'm not sure what version i have as i bought mine used.
Thanks
icelolly said:
I was looking at the website for "Traffic-I". This is a subscription system for traffic info (and a sort of GPS ?)
The free trial refers to XDA2 not XDA1. I assume that is because the XDA2 has W2003 0n as standard?
Is it possible to upgrade my O/S to 2003. I'm not sure what version i have as i bought mine used.
Thanks
Click to expand...
Click to collapse
Yes you can do it my recommendation persists just on upgrading the RUU not the RSU, there's a lots of threads posting how to upgrade to WM2003, search, read more and learn
Thanks for the tips. I assume then that upgrading the RUU only, will allow all Wm2003 programs to work on my device. This upgrade is reversible if the threads regarding original back ups are followed?
icelolly said:
Thanks for the tips. I assume then that upgrading the RUU only, will allow all Wm2003 programs to work on my device. This upgrade is reversible if the threads regarding original back ups are followed?
Click to expand...
Click to collapse
Yes what you need is upgrading the RUU. It will allow all wm2003 to work on ur unit, thus you could back up as well your original default rom before installing the one that you'll cook
Ok thanks for that. I'l llook up how to back up old ROM first then get my oven gloves on and start cooking
Where Can I Download ROM WM2003
i try up grade to wm2003 T-Mobile 4.00.21 but i cant do cause i have Error message my machine use PW10A1, that version just for PW10B1..
So how can i get version for my machine??
Now i use :
ROM. 3.20.06
RS 4.01.
4.00.21 is very outdated ... try 4.01.16 and don't worry about the version as long as you do NOT touch the RSU part
Where ??
Where i can download ROM 4.01.16 have u or give me link
http://lumpistefan.dyndns.org/
I've had to stop using my XDA for the moment. It's a great piece of kit but the incoming signal quality is quite poor (Compared to a normal mobile) I've missed several calls that have gone straight to my answerphone when i normally never miss any. There are some threads about signal quality but shouldnt this be built in from new as being totaly reliable. Any comments appreciated.
RSU flashing might help ... but it's VERY risky
Biso007 said:
RSU flashing might help ... but it's VERY risky
Click to expand...
Click to collapse
Yes point taken on that!. To be quite honest the RUU part of the XDA (The programs etc) work really well and i'm not too bothered about any mods there. I'ts just that i use it for work and i can't really afford to miss calls and not being an expert in these things i find it hard to accept that the incoming signal quality is dependant on what sort of RUU software you have. :roll:
I suppose that as i'm not using it at all, and upgrading is risky but recoverable? and if it was out of action temporarily whilst a software failure was being put right then this would not be a problem for me. What i would worry about is if it all went belly up would i be able to get help on restoring it back to it's former glory?
Doug
recovering failed RSU flashing is a very tough process, and might not work as well ... you have to be very careful.
As a matter of fact, I 've done many RSU flashing before and all went OK ... but I know about many horrible stories about dead devices that can't be repaired except by h/w replacement.
If you can't really use it, it's ok to go for RSU flashing but pick the right RSU upgrade ... and stay away from O2 RSU 4.21
OK Biso007 i think you have convinced me. I think i will reluctantly sell the XDA (Someone will get a bargain as it has TT3 and maps on it) and wait a little while and see what else comes up.
Cheers
Doug
Hi, I am absolutely new to this, I am about to take delivery of an MDA Pro on T-Mobile, and i am wondering can i install say a jasjar or O2 rom image to get round some of the problems experienced with T-Mobiles roms?
I hope someone can help
Cheers in advance
Jonathan
yes, you can arbitrarily mix Windows Mobile core, Radio stack, and Extended ROM version.
Thank you and a further Question
By using the say Imate rom, will that eliminate the problems experienced with the t-mobile rom
Cheers and thank you
Jonathan
what problems are you having
i updated a magiacn that was ok and it totally fired it beyone repair
jesus, what did you do? You've got me a little worried now since i'm looking into cooking roms or trying some other device roms on my sx66. I was under the impression that it was relatively safe if your careful.
what did you do to fry it?
i simply downloaded a rom update off the phone porivders website,ran it and my lil magican was no more lol
this is the Universal forum. Of course if you burn a ROM for a different device then it will make poof.
Back to the question - what were your problems with the T-Mobile ROM? Were they T-Mobile issues or Microsoft issues? Or radio stack?
Where can you get T-Mobile roms from other than the ones on the WIKI (which is missing links). Do T-Mobile UK publish them, as I could not see any sensible links when I was logged in.