I want to know if there's a way that you can have sounds play via the PC speaker, so when your device is on silent on your desk, when you get a text or a phone call, it will play a sound of your choice via the speaker.
Any takers?
Related
Anyone have a problem like this:
I did a had reset but it still is doing this-
The speaker plays my ringtones out loud even when my headphones are plugged in!!
Thanks,
Daniel
Mine has always been like that, whicever ROM I used.
Really????
My old XDA never did this...
So if i'm listening to music I run the risk of having my ringtone play out loud??
Is the only solution to change my ring prefrences to vibrate only when i'm listening to music (since the phone volume itself cannot be muted)??
When I preview the sound it doesnt play out loud
I don't have such problem with original headset. But, if I use bluetooth headset it happens.
So this is not normal....
How do I fix it?
I tried a hard reset- didn't work!!
Playing the ringtone out of the speaker even though the headphones are in is normal with most if not all phones. The headphones are only to listen to music and calls.
If you had the phones in but not in your ears and the phone rang only in the headphones how would you hear it?
Why would your headphones be plugged in if you are not listening to music?? And to answer your question- you would know the phone is riging by it vibrating.
Anyways- many people told me this is not normal...so there must be a way to change it.
Also, when I am in silent or vibrate mode and I accidentaly or even purposely push my Voice Command button the beep sound will come out of the speaker-
It will change the sound icon from Vibrate or Silent to the regular icon but will stay in silent/vibrate mode-
Is this normal??
-Daniel
Not sure about the voice command question but with regards "WHy would you have your headphones in if you're not listening to music" the answer is to use the phone handsfree.
Whether this is in the car (law over here) or while in the office a lot of people over here use headphones instead of holding the phone to your ear, some believe that the safer or healthier. No real proof but handsfree is popular.
Saw this same post on the Neonode forum and the SE's do the same so I presumed normal and as I say if you were using the headphones as handsfree if actually a good thing. Yes the vibrate would tell you but say you're at someone else's desk and can't hear the phone vibrating across your desk (hell of a vibrate really isn't it).
Anyway, hope that answers the headphones question
So why did some people say this doesn't happen to them?
That's an unanswerable question. It could be any number of reasons and going on the state of play with the ROMs is possibly down to this.
Going through the forums its amazing the number of people that have different problems with apparently the same phone.
I have the exact same problem, and am still looking for a solution.
The most irritating thing is that when I turn all ringtones off (only vibrate on) and I receive an incoming call, the sound that is currently playing (windows media player or some other program) is played for a fraction of a second thru the external speaker (the program pauses the mp3 playback on an incoming call, but this happens to late). Because of this it's impossible to use the phone for MP3 playback in a place where it's important that no sound is produced.
It would be really nice to completly turn the external speaker off when a headset is plugged in (i find it really strange this isn't the case right now).
It would be nice if someone found a solution for this (in my opionion) huge problem.
Yea,
I found this is irritating too,
I am using pocketMax Phonealarm
and mute:
- system volume
- phone volume
but max the call volume ( as I think that's required to answer a call)
I plugged my headset (using 2.5mm to 3.5mm jack) and listen the music using winamp & increase the volume, apparently the system volume is increased too ==> I think that's the reason why everytime:
- incoming phone call
- any reminder
is sounded in the headset too.... totally [email protected]@[email protected]#
Any solution for this????!!!!!
I just picked up a Mogul (WM6) about a month ago. This site has been great in helping me customize it. One thing is still out of my grip though.
I listen to music while on the bus with the headset that comes with it (which is surprisingly not bad compared to my old iPod earbuds). Problem is if the phone rings, it rings very loud through the phone speaker and not through the headset.
I cant set it to vibrate while playing music, since it shuts off all the sound, and if I silence the PDA, it also silences the music thats playing.
Any way to either get it to ring through the headset, or to set it to vibrate while still having the music playing?
Thanks in advance.
i would love an answer to this question. having the same issue with my touch.
I use the w100 wired remote with my trinity, and use a in ear headset piece to listen to my music in the the public transport.
Is it possible that when people call me I will hear the incoming call trough the headset and not trough the phone speakers? because now im hearing both and its kinda pointless if its using the phone speakers aswell.
Ive tried putting the phone on vibrate but then my media player wont work anymore.
I know its possible to turn every sound on vibrate but isnt there a vibrate profile piece of software that puts the phone onto vibrate but I will still be able to listen to music and hear an incoming call?
Hi,
You might wanna try PocketMax's PhoneAlarm.
It has so many settings, setting everything right takes 10 runs of trial and error, but thus far I have been able to do anything I've wanted.
I'm sure most of you know what I'm talking about. If you recieve any notifications When listening to any audio through headphones (or through the mini usb port), the device pushes the notification sound through the speaker. This is fine when having a ringer enabled because I'd obviously want to hear the ring. What I dislike though, is when I have notfications (rings, text messages, etc.) on silent or vibrate, it pushes the audio that I'm listening to through the speaker still. I've always disliked this in WM. My PPC6700 did the same thing, but now I'd really like to know if there's a way to change this.
Now that I have an 8GB SD card, my Titan has started to become my primary mp3 player. I do FOH sound at a local club, and when playing music between bands, it's really annoying to have the music suddenlly cut out because a phone call is coming in. Likewise when I'm quietly watching MobiTV with my headphones on at work, and suddenly, Survivorman is blaring through the speaker because a call is coming in...You get the point. The ringer is off, but the phone still trys to let a ring through the speaker anyway, and since no ring is selected, it pushes any audio being played through.
I realize that this relatively simple problem probably does not have a simple solution as this is probably buried deep in the architecture of how WM handles audio gateways...that almost sounded like I knew what I was talking about; I can assure you that I do not . This is where you guys come in. I'm willing to test any ideas you guys have got. I don't care if it f&#*s up my phone...a hard reset isn't going to ruin my day. I'd just like a solution for this.
Ideas??
Thanks for your help and for this forum!..it has saved my phone more then a few times already.
Me too having the same problem. I listen to music via my bluetooth mono headset and these notifications (whcih I get plenty) disconnect the bluetooth audio gateway, forcing me to reach out to my phone and enabling the audio gateway again.
Yeah, I hate that too! I have the i760, one other thing on this phone I dislike is that the volume must be on to hear audio through my headphones. But there I am in a store listening to some rock at a loud volume, and there it is playing for the entire f'n store to hear when I get a call, thanks PPC!
Possible Solution!!!!
Might I recommend a Profiler. Like PPCProfiler. Just Google it.
What you could do is create a profile called music or what ever you want to name it. Then you could set up that profile to turn ringers on with the volume level you like and with or without vibration and select silent or vibrate only for the notifications. You could really but together any combination. I believe with PPCProfile you can even make a profile as a Headset Mode. So it will auto detect the headset and switch without having to do anything else.
Cheers.
Curious G.
Thanks for the reply, but a profiler isn't exactly what I'm looking for. I've had them before in previous roms. The problem isn't that it's an inconvienence to switch to silent or vibrate. It's that when things are silenced or on vibrate, any background audio is pushed through the speaker while the notification is going off. Meanwhile that audio that I want to be played cuts out of the path that I want it going through (ie. headphones).
Thanks tho...I'm open to any ideas.
Hi,
On my HTC M8 when I set it to vibrate, all speaker sounds are muted, when I plug in headphones, and listen to music, when I get a call, the ringtone will play through my headphones. Which is how I want it.
On S7 Edge when I set it to vibrate, all speaker sounds are muted, when I plug in headphones, and listen to music, when I get a call, the music stops and there is no ringtone, I never know am I getting a call or have I dropped from 4G/3G to GSM and spotify can't stream.
When I set it to soud, it plays the ringtone through the headphones but ALSO through the speaker, which makes no sense to me. Is there any way to change this behavior?
Lawk said:
Hi,
On my HTC M8 when I set it to vibrate, all speaker sounds are muted, when I plug in headphones, and listen to music, when I get a call, the ringtone will play through my headphones. Which is how I want it.
On S7 Edge when I set it to vibrate, all speaker sounds are muted, when I plug in headphones, and listen to music, when I get a call, the music stops and there is no ringtone, I never know am I getting a call or have I dropped from 4G/3G to GSM and spotify can't stream.
When I set it to soud, it plays the ringtone through the headphones but ALSO through the speaker, which makes no sense to me. Is there any way to change this behavior?
Click to expand...
Click to collapse
I've noted these matters. But I haven't come across a solution. Especially the last one. I don't know if Samsung considers it a bug or a feature. Ideally, if the headphones are plugged in, the phone speaker should not work in any way.
Thanks for the response! At least it is not a faulty headphone socket/phone then.