I am facing a problem which need your guidance, i am charging my battery after 20 days when i use AC charger with 24 PIN adapter, Right hand LED is continuously blinking in Red colour and LCD is also blinking, and seems no charging.
when i placed the PDA on Cradle only red LED is blinking (fast).
please let me know is my battery dead (i think someone replaced my battery ), or something else , what should i do. ?
Model : XDA2i
Thanks
It seems like the problem is with your battery. Can you charge it in a XDA/MDA USB cradle (also used to sync your PPC with a PC)?
i had this problem once after using the 2020i in the car, so i took it inside to my sisters and lugged it into the USB and i got exactly what you are describing. When the screen flashin started, i unplugged it totally... the battery was devoid of power.
When i returned home i removed the battery and charged it in the Aux batt slot in the cradle for a couple of hours. Then returned it to the pda and then replaced the pda back in the cradle. It then proceded to charge fine!
And more to the point has been fine since.
This happened back at Christmas!!
Hope it works for you!
i had this problem once after using the 2020i in the car, so i took it inside to my sisters and lugged it into the USB and i got exactly what you are describing. When the screen flashin started, i unplugged it totally... the battery was devoid of power.
When i returned home i removed the battery and charged it in the Aux batt slot in the cradle for a couple of hours. Then returned it to the pda and then replaced the pda back in the cradle. It then proceded to charge fine!
And more to the point has been fine since.
This happened back at Christmas!!
Hope it works for you!
Thanks for the hints. I normally charge my PDA in the cradle itself but will also charge the battery in the AUX slot when I'm at work and want to keep my phone in my pocket.
Is that a hint of sarcasm Triband? :shock:
I was not saying charge the battery in the Aux slot all the time!
Nope, certainly not....it's practical to have both options (at least on the MDA II's USB cradle).
can anybody help me please
I have just bought a new battery (i believe its a cameron sino) it is a 3600 mAh for my himalaya however when i place it in and turn the machine on it says 0% charge and turns off after a few seconds i placed it in the cradle with mains power plugged in and checked the status and it says ac power only, so i left it a bit to see if it would charge... no luck so i removed it and placed it in the spare charger slot in the cradle the orange light came on so i left it untill it went green (charged) when i put the battery in the device again and turned on same problem status says 0% charge and turns off place it in cradle and it says ac only.
is this a duff battery or is there something i'm doing wrong/ can anything be done to make it work
Thanks
Xda2 Battery
I bought the same battery and it is working fine for me. i just put the battery in the xda2, let it charge till it was the green light. It works perfectly you should tell the person you got it from to give you a replacement AS ITS DEFINITELY IS THE BATTERY.
Hope this help
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
FredyOliva said:
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
Click to expand...
Click to collapse
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
My friend, you are simple the best. You are my hero. I lost one USB cable, but my phone come back. Your "Jump Start" trick worked perfecty. Really thanks about your tip. I don´t have words to glad you.
zabardast_1 said:
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
Click to expand...
Click to collapse
Thanks !
really glade you have it up and running
Have a nice day !
zabardast_1 said:
Thanks !
really glade you have it up and running
Have a nice day !
Click to expand...
Click to collapse
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
FredyOliva said:
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
Click to expand...
Click to collapse
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
zabardast_1 said:
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
Click to expand...
Click to collapse
Thanks one more time and sorry to annoying you...
I LOVE YOU !!!
Thanks more than a lot
Jump start trick worked fine for me too !! I cut the wire off from old usb mouse and use it as informed.
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
But my battery is alive again and I m happy, thank you !
jagr55 said:
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
Click to expand...
Click to collapse
It's just a design flaw. Sometimes things get by engineers. They're too busy trying to create an interesting user experience, and they forget to cross t's and dot i's.
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
iceblade911 said:
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
Click to expand...
Click to collapse
Thanks you all,it was grrrrr8 to hear you all got your phones working again.
Have a nice day !
my qtek 9100 freezes at startup after jump starting.
I jump started my Qtek 9100 and it started up as normal but it freezes at the windows mobile loading screen and doesnt go any further. Does this mean its charging or is the battery completely dead or something?
Wow, it like totally worked but Then I let it charge but battery stays at 0%
Thanks for this thread.
My word am I happy ...
Worked like a charm...
You are my hero! mi Qtek is alive again, i bought a cheap wall charger for a V3 Motorola and it can charge my Qtek after a battery drain off, i tray a lot of things but the usb wire cut off solve my problem and im happy again, thanks a lot and greetings from mexico! Saludos!!
Thanks man it was worked for me,
I was trying to put windows mobile 6 but after that mu camera and voice call buttons doesn't work
If you know more about win mobile 6 on wizard pls help me
Thanks
please do not use stripped USB cable or 9V battery to resurrect wizard. the battery is rated 3.6-3.7V (?? cant remember)... use 3x AA(A) batteries or other 3-4V power supply. I've done this with old pc PSU which has 3.3V output.
Just put battery in, connect charger, connect + - cables while inside wizard - bootup - when windows is loaded device can charge itself - disconnect resurrection power supply.
do not try to charge li-ion battery with whatever currents/voltages... or at least wear some kind of fire protection
Hi all! Sorry in advance for my bad English.
I have a Qtek9100 with WM5. G4 IPL/SPL 2.21.0001
Now I'm experiencing a problem charging my device.
I had a miniUSB problem some months ago, when my device accidently fall from the desk, when it was charging. The charger get damaged, and the port miniUSB on the PDA as well, and it only charged in a position, making pressure on the miniUSB. Replaced the charger because it's not the only Wizard at home and my dad welded (I think it's how it should be said, but for translation problem I want to mean stick the miniUSB to mainboard like... "glue'ing" it) =$
It worked fine! First days but then, when I link it to charger the device show the icon charging, charging bar is moving normaly, but when the green led turn on. Battery Icon show it's full, but when unplugged it from the charger, the battery icon decrease a lot, like 20% or less.
Sometimes, when it's charging when I pick the Wizard, it's turned off, and the RED led is on. Like when it's fully charged, but RED!
Do you think it's a hardware problem? Mainboard? If it's a hardware problem at the Official Qtek store, They'll ask for more than the commercial value for the repair!
I love my Wizard. Can't get used with another mobile phone!
Please help me!
Thanks a lot in advance.
Regards, skrpn.
Hi,
I am having a strange problem. My O2 XDA atom does not charge (by charger/USB) when it is ON. But when it is OFF, it charges via charger or USB both. Pl help me with this prob. I love this fone & dont wana lose it. Promptness appreciated. Thnx!!
same problem here
Yep, same here, and also I can't make it work with the PC, it charges, but active sync can't recognize it.
What could it be?
Thanks!
it could possibly be that the Mini USB in the atom has worn out or is dirty.
so back up and seek out a PDA repair expert :/
maheshmodak said:
Hi,
I am having a strange problem. My O2 XDA atom does not charge (by charger/USB) when it is ON. But when it is OFF, it charges via charger or USB both. Pl help me with this prob. I love this fone & dont wana lose it. Promptness appreciated. Thnx!!
Click to expand...
Click to collapse
try to conect disconnect mini usb pin. it sometimes happen to me aswell..... it's contact pin may be corroded and is not being connected properly
Somewhat similar issue here.. Need help please..
My O2 XDA IIs is charging only when turned off on a wallmount charger but when it is on or suspended the battery charge decreases until zero.. I can only charge it normally via usb connected on a pc..
I need help pls..
maybe you didn't install the Microsoft ActiveSync..
Hi
hi even my charger charge for only say 6 to 10 % after that it stop charging. and after 20 to 30 minutes again you can charge 7 to 10% (strange problem). but i found a solution for this. I used samsung charger and put mini usb connector at the charging end. now it charge only when the phone is off. So to overcome this problem i did camera + reset and it goes to bootloader mode and here you can charge enjoy ....