Hi,
My company uses a VPN to connect to an email exchange server.
What software can I use for this?
Thanks.
Silver
VPN & exchange
Use Wireless mail from handheld PC's www.handheld-pcs.com - That's who I work for, that's what we do, no need for vpn access.
Related
I recently purchased a tmobile mda and was trying to access my campus's network. But when I logged on, the only page I could view was about downloading a vpn client for multiple os's (but no windows mobile) to use the network.
Is there a vpn client for windows mobile?
Any help would be great.
Thanks!
There's a built-in client that will handle L2TP and PPTP VPNs. If you go into Settings/Connections and click "Edit my VPN servers" you can configure the client for your VPN. It's worth a try.
Tried that, didn't work... I decided to ask my University about their network, they said it was a cisco 3000 or something... And also informed me that "to their knowledge" the windows mobile 5 built in client isn't compatible...
I then went to the College of computer science help desk to see if some peers could help me. They said someone had bought a $100 program to be able to connect to the concentrator but didn't know who made it or where to get it.
Does anyone know of such a thing? Or a cheaper alternative?
AnthaVPN
I have found AnthaVPN wich is about from 40$ to 100$ depending what you need.
I'm trying also to open VPN without this IMHO too expensive solution. But if it's the only way - then I need to buy....
Maybe some kind of tunneling from own Linux-server (With Swan) might be the free solution....
I have been testing Bluefire Security's VPN and it works great, but my employer is using a Nortel system sio I cannot comment on the Cisco compatibility. It costs $79. I have also tries Antha but is cause problems enabling Wifi and Gprs.
John
Long time I could’t make connection with the built-in VPN client. After the latest ROM update from Qtek it works (I tested only PPTP). I can make VPN to SBS server and Windows XP. Also I can use Terminal Services true VPN connection.
The only thing I can’t get working is to access network shares (I tried GSFinder+ and NetUse).
Guka
Hi,
I try to establish a vpn connection to our company-VPN.
VPN Gateway is a cisco device. "Normal" connection via notebook with cisco vpn client works.
On my TyTN i installed ncp client. But i dont know how to configure the cisco settings.
On Cisco VPN Client:
- IP Adress of Gateway
- Group Authentication
- Transport IPSec over UDP
On ncp VPN Client:
- IP Adress of Gateway is easy to find
But i cannot assign the other settings. NCP Client has a lot of settings.
Has anybody success to establish vpn connection via windows Mobile to a cisco Gateway ?
Got it. Not the vpn Client was the problem.
The Blackberry connect SW (disabled!) prevented connection via vpn.
Deinstallation of BB Connect und vpn Client from Bluefire works fine.
What did you use as the VPN client to connect into the cisco gateway?
Do you use a RSA secureID token?
I am tring to get a VPN connection running from my HTC p3600i, WM6.
New VPN Client
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
WinnieK said:
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
Click to expand...
Click to collapse
Can you write your settings? I can't configre this
Any ideas on a MPPE PPTP VPN via WM6? I have been trying to get this to work for months and can't. I am operating under the presumption that the VPN client in WM5/6/6.1 doesn't support MPPE and I am therefor up S#!T creek without a 3rd party dialer...
(It is a VPN connection to my work and yes as sorry as this is they still use an encrypted PPTP connection for all of their VPN connections. If they would just move on to something a LITTLE more current L2TP/IPsec I wouldn't be having any of these problems...)
But is there such a thing as a 3rd party PPTP VPN client for WM5/6/6.1 I haven't been able to find one...
TIA~
WinnieK said:
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
Click to expand...
Click to collapse
kindly can you show where to set the Group Authentication ?!!!
New(ish) Cisco AnyConnect VPN Client
Cisco have released an AnyConnect VPN client for Windows Mobile 5/6 (version 2.3.185). This is specifically targetted towards the ASA 5500 platform as the VPN server, however it should also work with IOS VPN devices (I am told?).
I haven't tried it, however I have seen it demonstrated and it all seemed to work.
Personally I prefer the integrated L2TP/IPSec VPN client and have posted previously on how to get this working with Cisco PIX 6.3, ASA/PIX 7.x and IOS devices.
Andy
AnyConnect VPN client will support only SSL VPN, that avaiable on Cisco ASA and IOS from 12.4(20)T or later.
Can I have two VPN connections to two different places on the same computer?
I work at two different medical facilities. I have a VPN connection to one and I'm trying to set up one for the other. When I'm in the New Connection Wizard and I pick "automatically dial connection", it makes me pick the medical facility that I already had on the computer to "automatically dial" when trying to create this new one.
cool vpn has given the users privilege to surf internet with freedom and security Thanks to VPN
Hello,
I want to connect to my Company's VPN and read my e-mails.
My Company uses a Nortel Contivity switch to which I successfully connected with Bluefire Mobile Security VPN v2.7.5, Build 706 (IKE=DES+MD5+DH1; IPsec=3DES+MD5+LZH+PFS; NAT traversal active), using a cellular HSDPA connection. Now comes the bad part: I cannot configure Outlook to use the Exchange server nor the IMAP or POP servers (I tried with Flexmail 4 but with the same results) - it always say that the servers are not accessible. As far as I could figure it out, it seems that after the tunneling is operational, Outlook or any other software still tries to access the internet through the cellular connection (I tried to traceroot some addresses and it ALWAYS goes through the cellular line (not the tunneled connection).
What would be the correct settings in my connection manager so I could access the my Company's Exchange / POP / IMAP servers after I setup the VPN manually with Bluefire?
Thanks a lot!
DO you work for VZ ?? i too would like to connect to my vpn network ... I spoke to our techsupport and advised that wasnt possible ...just for bllackberry ... which i found odd ... i would be interested tofind out how to also
TheAlphonso said:
Hello,
I want to connect to my Company's VPN and read my e-mails.
My Company uses a Nortel Contivity switch to which I successfully connected with Bluefire Mobile Security VPN v2.7.5, Build 706 (IKE=DES+MD5+DH1; IPsec=3DES+MD5+LZH+PFS; NAT traversal active), using a cellular HSDPA connection. Now comes the bad part: I cannot configure Outlook to use the Exchange server nor the IMAP or POP servers (I tried with Flexmail 4 but with the same results) - it always say that the servers are not accessible. As far as I could figure it out, it seems that after the tunneling is operational, Outlook or any other software still tries to access the internet through the cellular connection (I tried to traceroot some addresses and it ALWAYS goes through the cellular line (not the tunneled connection).
What would be the correct settings in my connection manager so I could access the my Company's Exchange / POP / IMAP servers after I setup the VPN manually with Bluefire?
Thanks a lot!
Click to expand...
Click to collapse
!!!up!!!!!
when you configure your email account dont you specify which internet connection it should try to use? so shouldnt youspecify that your work conection is he connection that it should use to check mail.?
Hi all,
I'm trying to configure the VPN "SecureClient" on my p3600.
I've installed the SecureClient and configured it.
From my phone I can connect to the company VPN. Using the Remote Desktop I can access the computers inside the network, so the VPN seems to work correctly. I've tried with UMTS and Wi-Fi network.
I've configured the Messages application to access the Exchange servers via IMAP4, because I don't have access to the OMA directory to access it via OWA.
Using the network via activesync when I'm in office, everything work correctly and I can download the emails. So no VPN.
The problem is when I try to access the Exchange servers via VPN. Seems that the Messages application doesn't route the traffic trough the VPN application like the Terminal Server.
I'm using WM6.1
Can someone help plz?
Thanks in advance.
Hi all,
I have been tinkering with connectivity into my corporate network and so far been able to get a connection to our Office Communicator server via ASProxy and a secure wireless connection. However I am looking for a solution that works across my 3G connection via a VPN.
I have looked at the market place versions of OpenVpn and I cannot get it to work with our Cisco Gateway. I got stuck at the tun and adb part, so not sure what I need to do at this point so though I would ask the experts on here ;-) There has been much work on a very important missing part which was a user authentication proxy, so the next bit for me would be a means of connecting to an IPSec/UDP Cisco VPN Gateway that works with my Domain username and then a fob generated password.
Any help from you guys would be most appreciated and perhaps I can share my ASProxy configuration for anyone wishing to get their's working....
Thanks
Avalon
Hi,
you can't use an OpenVPN client to connect to a Cisco (IPsec) VPN server.
If you want to connect to an OpenVPN server then you can use OpenVPN Installer and OpenVPN Settings from the market.
If you want to connect to an IPsec server then use the built-in android VPN client or even some proprietary Cisco client from the market... (don't know about these as I only use OpenVPN)
Hi, thanks for the reply, however the built in VPN client will not work with our server. There is a Cisco anyconnect client that does connect, but we need a license for it which we dont currently have.
I will keep trying....