Hello, all!
I have a little mess in my registry because my OS from the very beginning didn't want to turn LCD off. Now I made it work, but it rather works as power button - music is not played and so on...
If someone can give me a snapshot of his registry, it would be appreciated! (exactly HKLM\System\CurrentControlSet\Control\Power)
The snaphot can be made with SystemSnapshot (attached)
Thank you in advance! :!:
Noone?
Here it comes.....
Hope it helps...
Thanx a lot! :lol:
Related
Well its not so much as a hack, just a tip. If you use tones while using the phone dialer on the wizard, I found the reponse time to input was really really slow and generally a pain to use if not unusable. I tried disabling the tones for dialing and the response time now is excellent.
Hope this helps .....
How do you do that?
Press green phone button
Bottom right "MENU"
OPTIONS
KEYPAD = OFF
OK
Let me know what u think ?
Gr8 tnx
Genius, why didn't i think of that....
Thanks !
Good tip m8!
Thanks
worked for me!! thanks mate
Also happy here
Victor
Arrrgggg....I just spent the last 2 week at a show where every night I had to verify crdit cards by phone. I punched in 1000's of numbers...always fumbling with the delay...NOW I find out.
Thanks dalewinterstein, next time I'll know.
Great tip, and default it appears to be set on "lange tonen" (Long Dialtones), so if you put it "uit" (Off) it is much better, but also when you use the medium setting "korte tonen" (Short Dialtones).
thx
HW
Oh great tip, not that laggy any more. Thanks
Another optio
I installed the Eten M600 dialer which is much more responsive (even with tones)
see
[url]http://forum.xda-developers.com/viewtopic.php?p=199894#199894
[/url]
Hi all,
Does anyone know how to turn the phone on and off programatically? Any help gratefully revceived!! Not worried what language it is in!
Thanks,
Steve
Perhaps this works: http://forum.xda-developers.com/viewtopic.php?t=48795&highlight=
I don't have WM5.
Cheers
Thanks Tweak, but I need something a little more detailed.
Just emulate a keystroke, VK_ 223 (power button).
It's on MSDN if you can find it, but that's the theory and practise.
V
It doesn't bother me, but people on the other end of the line complain that the beeping the Tytn makes when changing volume during a call is too loud. Especially the beep at the top end of the volume slider.
I did a little digging (after searching and checking the wiki fruitlessly) and found a solution that I thought I'd share. 8) I'm new here so I'll let someone else update the wiki if this looks useful.
There are actually 3 different sounds in play here: the one at the bottom end of the slider (quietest), the one in the middle posisitions (standard), and the one at the top end of the slider (loudest). These are handled by 3 registry keys:
HKCU\ControlPanel\Sounds\LoudestInCallVolume
HKCU\ControlPanel\Sounds\QuietestInCallVolume
HKCU\ControlPanel\Sounds\StandardInCallVolume
within each of these keys the default 'Script' value is 'p' for 'play'
Change the 'Script' value to blank (erase the 'p')
Now the sounds won't be played and won't annoy your friends. Bonus - at least perceived by me - since the tytn isn't playing those sounds, the volume actually changes MUCH FASTER, practically instantaneously - the way you'd (or at least I'd) like it to.
Hope this is useful to someone...
Great - that really REALLY bugged the hell out of me! One for fit4cat Hermes Tweaker maybe?
Wiki updated, but don't be shy to do it yourself next time
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
BTW, the tweak works perfect on my TyTN, thanks!
Great! I'm glad I wasn't the only one. Thanks pof.
Thank you so much.
Excellent update!
nice one! that was doing my nut!
FANTASTIC
This is my first post to this forum... and I have to say that since buying my TyTN I have been plagued with the obvious "buying it in france and wanting it in english with the french HW keyb" problems, and then annoying things like the volume beeps were just exasperating.
This has made a huge difference
THANK YOU very much!!!
sorry guys but i forgot to go into the registry editing... how can i do it? thanks ;-) and sorry
jasjar said:
sorry guys but i forgot to go into the registry editing... how can i do it? thanks ;-) and sorry
Click to expand...
Click to collapse
You need to use 3rd party software, like PHM Registry editor or Resco Registry...
I fixed my problem when i updated my tytn with imate rom. Now, volume changes are faster with no annoying sound.
Very nice!!!
Thanks - Rich
Thank you! It's always nice to find these new tweaks, and this one certainly makes a noticeable difference.
Thanks for the tweak, my ears are pleased with it already!!
nice one cheers!!
WOW ! I didn't realize so many people would benefit from this. I didn't find any discussion of it when I searched.
Glad I could help. I won't be shy about posting new stuff I find in the future.
I also suffered from this stupid htc/windows programing bug.
Thank you!!
I read about and implemented this right after you posted it. It works a treat.
THANKS!
Nice one, mightyeric. I've spread the word on other forums... (but made sure I credited you!!!)
Does anyone have the skills to make this into a CAB for easy install?
Excellent, thanks for the tip- My 'dial' sound seems to have changed or corrupted somehow (I don't see how I would have changed it) so I've turned it off now- very handy- thanks
Hello all,
I have searched & searched. I've read the Wiki and found the info there, more than once. I'm just not "techie" and need more details. I absolutely hate the loud startup sound on the AT&T 8525 that came on my new phone.
I downloaded the Resco trial and I've spent hours trying to find the correct file to "fix" but I just haven't been able to find it. I also like the animation, just not the sound. It looks like just adjust the WAV file, when I finally find it on my phone?
Sorry, but any additional help (Step by Step if possible) you can give me would be greatly appreciated. This sound is driving me & my husband nuts.
After much searching and many hours, the Voice Command works great! Very pleased with that, this forum is awesome.
MsGadget
I assume you are referring to the following?:
Disable/change the startup animation or sound
HKLM\SOFTWARE\HTC\StartupAnimationEnabled - change from 1 to 0 to turn everything off and permanently fix the volume issue.
HKLM\SOFTWARE\HTC\StartupAnimationVolumn - change from 16 to 200 (higher number = lower volume) to lower the volume to a whisper but keep the animation.
You can also customize the animated boot up by deleting or changing 2 keys. (Doing this does not fix the volume issue)
Delete the WAVFile Key to remove the sound only.
Delete the GIFFile Key to remove the animation only.
Put your own .GIF file or .WAV file on the phone and rewrite the 2 keys (WAVFile GIFFile) to the new file location. i.e. \My Documents\Files\CustomAnimation.gif
It will help us to know where you are getting stuck.
Can you find thw key HKLM\SOFTWARE\HTC\StartupAnimation using Resco?
Mike
That's what I found, but I can't find the file to change in Resco. I tried to do a search in Resco for the file, but no luck. What does it mean by doesn't fix volume issues?
Sorry, but I've been reading & searching for 3 days now. I'm not the least bit techie, but I love my gadgets!
Thank you!
msgadget said:
That's what I found, but I can't find the file to change in Resco. I tried to do a search in Resco for the file, but no luck. What does it mean by doesn't fix volume issues?
Sorry, but I've been reading & searching for 3 days now. I'm not the least bit techie, but I love my gadgets!
Thank you!
Click to expand...
Click to collapse
Ok. One step at a time perhaps.
First you are not using Resco to look for a file but an entry(s) in the Registry. So the first thing to do is to go into Resco and look through the menus for something like "Edit the Registry". I use PHM registry Editor so I'm not sure what menu it's in but it will be in the Resco menus somewhere.
Mike
Download total commander, its free and I know for sure it works.
HKLM is the area of the registry, SOFTWARE is the folder, HTC the next folder and then look for StartupAnimationEnabled
Change the value from 1 to 0, then put the device into sleep for 15 seconds (hit the power button, but dont turn it off) and then do a soft reset.
When it reboots, it will be the way you want it.
HKLM\SOFTWARE\HTC\StartupAnimationEnabled - change from 1 to 0 to turn everything off and permanently fix the volume issue
Thank you both very much. I'll work on it again when I get home. Wish me luck. Thank goodness for Sprite backup.
Mona
mikechannon & teknics,
I'm so happy, I got it to work. Your step-by-step instructions were very clear. I greatly appreciate both of you taking the time to share the basics of how & where to start.
Most others in this type of forum probably know where to begin, but I really needed the very basics. The knowledge you provided is very valuable!
Thanks again,
MsGadget
Pleased you got it to work - future registry changes will be a piece of cake
Mike
Agreed!
Not a problem, that's why we are all here right?
Hi, sorry but i dont find any threads with this problem...so i made a ROM upgrade on my Himalaya device earlier. It works but only the camera has trouble. No reaction for the button i press. I remember i had the same problem much earlier (approx. two years ago ) and somebody sent me a camera.cab or something like that. I teleported it to my pda and it fixed my button problem. Can somebody help me please? WM2003 SE 4.21.1088 ROM 2.02.. thank you in advance. BBR
A little bit of research pays off:
http://forum.xda-developers.com/showthread.php?t=249857
go nuts!!
Camera
Hi, thanks for your suggestion. I just downloaded the cabinet and installed it. I'm very sorry it doesn't work. I got the camera icon in my programs menu but if i try to launch it the win says - cannot find 'camerav2.7b21026' (or one of its components). Make sure the path...correct and all the....libaries available.
Any idea?
Thanks
BBR
flyboyovyick2k9 said:
A little bit of research pays off:
http://forum.xda-developers.com/showthread.php?t=249857
go nuts!!
Click to expand...
Click to collapse
Solved
A littlebit of research pays off indeed.
I found it on the ftp near an asian rom
Problem is solved - case is closed
backboneranger said:
Hi, thanks for your suggestion. I just downloaded the cabinet and installed it. I'm very sorry it doesn't work. I got the camera icon in my programs menu but if i try to launch it the win says - cannot find 'camerav2.7b21026' (or one of its components). Make sure the path...correct and all the....libaries available.
Any idea?
Thanks
BBR
Click to expand...
Click to collapse
Acai force max
Thank your for sharing this wonderful story. I find your post very informative.
I am very excited to be a part of this Forum and look forward to bringing Value to it.