This combination works perfect.
However... is it normal that the TomTom instuctions come throughout the Qtek speaker and that when you receive a phone call, the HBH-35 is activated ?
Isn't it possible to hear Tomtom as well throug out the headset ???
Maybe a stupid question ????
mvb95 said:
This combination works perfect.
However... is it normal that the TomTom instuctions come throughout the Qtek speaker and that when you receive a phone call, the HBH-35 is activated ?
Isn't it possible to hear Tomtom as well throug out the headset ???
Maybe a stupid question ????
Click to expand...
Click to collapse
Your system is working correctly. The bluetooth activates the headset when a call is received or made, the voice prompts or mp3 or other audio cannot be routed through the headset at this time. Hopefully this will be addressed either with a new rom release or by the brilliant Towa the author of Bluetooth tools.
Thanks !
And do I have to activate in a certain order ?
For example:
1 . BT mode on Qtek: " ON "
2. Enable BT headset on Qtek
3. Switch on my HBH-35 headset ?
Is this correct so, or can I do better ?
( plz excuse me for my affull English... )
Related
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
I have BT carkit, and BT handsfree,
and I have the same problem.
With my Nokia 6600, it works great,
there's no "default profile",
both works.
Even more confused now
Thanks for the reply - I'm even more confused.
What I ment to say that with the 6600 it works great, :lol:
unlink the i-mate pocket pc. :roll:
I have just purchased the xdaII and found this problem too...
Have you found out any more info on this?
The only thing i can do at the moment is rename the bluetooth device and it then prompts me to set as default...
Ta
Christian
Thanks for the tip
No I have not found out more.
I tried the widcomm drivers, but found headset was all screwed up.
Thanks for the tip on rename. I have been deleting and recreating.
Now we only need a application on the Today that can rename the two BT devices and back.
Maybey a reg.key-file we can 'click' ??
One more of the shortcommings of XDAII in anything related to the BT sofware.
I read about a new ROM version comming out soon, that is supposed to fix the those BT problems, Has anyone more info on that?
:?:
IanF said:
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
Click to expand...
Click to collapse
I just rx'd my Plantronics M3000 headset. It bonds to my XDA2 but I cannot for the life of me, answer or make a call with the headset.
1. When searching for a Bluetooth device, it finds the M3000 by Plantronics
2. I highlight it & tap next
3. I enter the bond code
4. I give it a name & tap finish.
Then it asks me, "This Bluetooth device supports headset profile, would you like to set it as your bluetooth headset?"
I answered Yes but I can't do the calling. Should this be answered No?
I originate a call on the XDA2, when it connects, I press and release the headset TALK button, hear a tone in the earpiece but the call never switches to the headset.
I have the green 3 sec blinking green light so unit is on. XDA2 has the blue indicator blinking.
Any feedback would be helpful since you do have the Plantronics,
Regards
Craig
Hi cshields1!
I don't have a Plantronics, but two SE HBH 30 and HBH 35 that work "somehow" with my XDAII.
First I would reccomend you to upgrade your ROM, since the Bluetooth radio stack of version 1.06.01 seem to have improved a bit over the previous ones (just in case you haven't yet)
Second, no matter what you do, actually you would NOT be able to initiate a call from your headset, you just can answer an incoming call and end a call, that is with the poor BT support in the XDAII.
Third, I'm not sure what you do, but please check:
- once your headset is bonded, turn your BT setting back to ON (BT icon on the bottom right of the Today screen)
- be sure your phone is NOT in flight mode
- Check that your "BT headset mode" in Today Screen is enabled
Tell me if this works.
:wink:
I've noticed, that there are several threads about the Bluetooth communication of the magician. Therefor this one will be one of them.
I'm using TomTom Navigator 5 with Bluetooth GPS on my device. Also i have a bluetooth Handsfree kit from THB mounted in my car. Now, allt that i want is to here the output of the tomtom via my handsfree kit. But it didn't work. All sound is coming of the built in speaker.
If I get al call, the handsfree is working fine. So this is not a problem..... :-(
Anyone got a similar constelation and got a solution for me. I've already contacted TomTom and THB, and both told me to contact the manufactor of the magician. So i think that is a Bluetooth stck problem. I'm still using the default Bluetoot stack of the magician. Will any other help me to find a solution?
Th ROM I'm using is a german 1.12......
Stefan
LumpiStefan said:
I've noticed, that there are several threads about the Bluetooth communication of the magician. Therefor this one will be one of them.
I'm using TomTom Navigator 5 with Bluetooth GPS on my device. Also i have a bluetooth Handsfree kit from THB mounted in my car. Now, allt that i want is to here the output of the tomtom via my handsfree kit. But it didn't work. All sound is coming of the built in speaker.
If I get al call, the handsfree is working fine. So this is not a problem..... :-(
Anyone got a similar constelation and got a solution for me. I've already contacted TomTom and THB, and both told me to contact the manufactor of the magician. So i think that is a Bluetooth stck problem. I'm still using the default Bluetoot stack of the magician. Will any other help me to find a solution?
Th ROM I'm using is a german 1.12......
Stefan
Click to expand...
Click to collapse
I´ve got the same solution (allmost) AS YOU - BUT THINK ABOUT IT....if the TT-voice came trough your bluetooth set, all the calls would be interupted every time you made a call, while driving with voicenavigation....so it has to be seperated in a loudspeaker and through your bluetooth solution headset etc....
Joost39 said:
I´ve got the same solution (allmost) AS YOU - BUT THINK ABOUT IT....if the TT-voice came trough your bluetooth set, all the calls would be interupted every time you made a call, while driving with voicenavigation....so it has to be seperated in a loudspeaker and through your bluetooth solution headset etc....
Click to expand...
Click to collapse
For me that would be no problem, cause i have a fixed telephone in my car, that i can use for phone calls. ;-)
But the sound of the magician speaker is very low.
I´m loving loud music in my car, and then i won´t hear any instructions out of the Magician speaker.....
Stefan
LumpiStefan said:
Joost39 said:
I´ve got the same solution (allmost) AS YOU - BUT THINK ABOUT IT....if the TT-voice came trough your bluetooth set, all the calls would be interupted every time you made a call, while driving with voicenavigation....so it has to be seperated in a loudspeaker and through your bluetooth solution headset etc....
Click to expand...
Click to collapse
For me that would be no problem, cause i have a fixed telephone in my car, that i can use for phone calls. ;-)
But the sound of the magician speaker is very low.
I´m loving loud music in my car, and then i won´t hear any instructions out of the Magician speaker.....
Stefan
Click to expand...
Click to collapse
Okay!
But then you have to go to an mobilephone technician who can fix it so that your PDA can connect to the carstereo with af muting device ----- you get the music and it mutes when the navigationvoice comes on.
I know that it can be done, but it cost bucks....or Euros!
Or buy another bluetooth driver that supports MP3 se www.handago.com
then you can get the navigation and musik in the headset!
hi guys, i know all of you want more bt stack rather than ms bt stack. now i found new bluetooth stock for dopod 818(o2 mini).
this is support your o2 mini support stereo bluetooth headset, but make should your bt headset supports. and there is also file transfer stock......and other thing, but stereo bluetooth function need to be improving.
attention: backup you system first.
i learn a lot in this forum, so i want to share this stock for all of you. this stock is i find from somewhere, so i can not fix any bug. anyway just enjoy....
First post and delivering such a revolution? Makes me nervous...
Chatty said:
First post and delivering such a revolution? Makes me nervous...
Click to expand...
Click to collapse
HAHA, I KNOW. BUT YOU CAN TRY, PLEASE FIND ATTACHED PHOTO. THIS DRIVER COME FROM ONE BLUETOOTH HANDSET.
Could this be? Can anyone verify?
Handsfree versus headset
Hi,
I tried and first thing, everything work now as fine as before so a first good point.
Second one problem : my Bluespoon AX is only recognize as a Hands-free and you can only set "Audio redirection" for Headset.
Perhaps some registry work ?
I will continue to investigate
very nice patch indeed..
installed it on my JAM... an it runs OK...
some extinsive testing is required however... I'll let you know later
Thank you kevinyang6688
If this works, you'll be the best
Works here aswell!
it even seems to support bluetooth printing???
---
just downloaded.. will give it a try.
thanks.
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Re: O2 MINI NEW BLUETOOTH STOCK.
vicqoo said:
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When you're logged on, you can download the file in the first post.
INstalled it but I have no clue how to make it work. Been to the BT settings and everything is there but I have no clue to as it does not detect my my Jabra BT250V.
Will this work in actually turning my Jabra into an audio headset or is it only as phone headset?
Does this help at all with the Nokia car kit echo issue?
Cheers
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
To Leewenam
Same thing for me but my Bluespon ax is only detected as a handsfree
Re: To Leewenam
eurorpeen said:
Same thing for me but my Bluespon ax is only detected as a handsfree
Click to expand...
Click to collapse
I guess this audio streaming thing only work for stereo BT? can anyone confirm this?
leeweenam said:
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
Click to expand...
Click to collapse
maybe delete the device and bond it again???
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Man, you seriously kick a$$! This cab adds A2DP, FTP (successfully sent a series of 3 files to my Magician :shock: :wink: ), Audio Gateway (was able to use my laptop as a BT handsfree ), BT Printing Profile... AWESOME!!! Takes MS BT stack to a whole new level :shock:
But you could already send files with activesync over bluetooth without this stack (do i suppose ftp service is the same thing). Btw can you acces the files located on your computer from your mini now??? (if yes plz tell me how)
As far as I am concerned, it works but doesn t change anything with my bluetooth headset and voice command, i always don t hear any voice command sound in my bt headset, but then I hear the phone conversation directly in the headset...so nothing has changed.
Would have loved so much to hear and launch voice commands directly from the headset's mic.
But thx anyway! that s a really good thing for us anyway =)
It does work with I-tech S35 Stereo BT Headset
As per subject really...
Just tested this on my 1.12.00 T-Mobile Rom and indeed all audio is indeed being re-directed to my headset. Only 'drawback' is that I can't get it to work with PocketMind Pocket Music- the sound it just muted.
But it works perfectly well with Windows Media Player. Slight hitch with WMP is that I am unable to change the volume on the software or indeed the JAM system volume directly- a minor fault for me since I have a volume control my headset Also the music seems to cut out for a second or so every 7-8 seconds.
Music pauses and restarts when an incoming phone call is received.
A massive thanks goes out kevinyang6688. Cheers mate, I have been wanting this for ages! Thanks again!
Hey guys,
I've followed every single word written about playing music on a bluetooth headset (Not a Stereo one) , and unfortunately nothing worked ..
I'm really in a bad need for this .. So, I'd like to ask first .. did any body managed to do so ?? I tried a dozen of programs for rerouting aduio to the bluetooth headset but nothing worked .. is there any body here who managed to get this to work on JAM ??
If there is no body who did that .. I've got an idea .. Since the device by default direct the sound of the calls speaker to the bluetooth headset to allw you to make and recieve calls .. so , is there any body who knows a program that lets you choose what Audio output to use ?? I mean any program that allows you to listen to music or videos from the calls speaker not the loud speaker of the device ..
Hope any body could help ..
Why don't you just use a program like BlueTunes.
I haven't used it but its suppose to send music throught your BT headpiece or headset.
I have a motorola S9 (stereo BT) and a I-mate JAM (similar to Qtek s110), with a cab from this forum and wmplayer or mortplayer enhanced (also from this forum, it works fine, also tryed with a S100 and a HTC 3600 (this last one need no extra software).
http://forum.xda-developers.com/showthread.php?t=249219
http://forum.xda-developers.com/showthread.php?t=274730
Hi
I use a HP IPAQ 6910. It works well except the bluetooth. When I connect 6910 with a samsung WEP410 headset. It only works for outcoming calls. That means everytime a call comes I must answer the call on 6910 first, then click the WEP410 to answer. Otherwise it will close the call if I click the WEP410 to answer directly.
Does anyone know the reason?