Database Users

Wifi access to internet via ISA firewall

I've just set up a small wireless network at home through which I intend to use several devices to connect to the internet through my LAN!
The LAN gateway is running ISA 2004 and my home computer is running the necessary Firewall client (a completely secure connection with username and password)!
Now everything's working fine... the pocket pc hooks up just right and i can browse the network and do what I could probably do using my own personal computer BUT the internet doesn't work!
It keeps asking me for a username and password (which like i usually provide in internet explorer on my personal computer) which i do supply... three times in a row after which it gives me an error saying that ISA cannot authenticate me!
The home computer doesn;t run the internet without the firewall client, and i'm supposing the pocket pc is facing the same dilemma! is there any way to circumvent this issue? perhaps a mobile version of the isa firewall client?
Please help. Thanks!

afaik there isn't a mobile version of the firewall client.
I set my ISA server to allow anonymous internet access ,and set all my machines up as secure nat clients (set isa servers ip as default gateway, I use a dhcp scope to do this). There is lots of info on this on microsofts ISA server website, I'd suggest a look there first, or try a google for secure nat.
Good luck, works well for me but ymmv.

LAN access USB

Hi.
I need to have lan access from my pocketpc 2003 (Qtek s110 / magician) using usb cable.
Activesync is version 4.0
When using internet explorer i am able to navigate using the usb cable, after specifying the proxy server, username and password(!!).
using the vxutil i see that the ppc IP is 192.168.55.101 (Serial on USB)
default gw is 192.168.55.100 (is the pocketpc, or the host conputer??)
My computer's IP addres is 10.0.100.108 (given by the enterprise DHCP)
on Vxutil, when i try to ping my computer (by the name) or any other computer on the nework the name is resolved(!) in it's IP address but ping times out everytime. Strange because DNS server is 127.0.0.1 (localkhost) and dont have any hosts file (at least that i know of).
Can it be a route missing on my local computer? but there is no network interface to the qtek when i do ipconfig on my pc!
please help!
thanks!

need a bit of help, how to connect to my pc using athena??

Ok i know i already saw the answer of this somewhere but i already looked for it and i just cant find it.
I have a athena and i would like to remotely connect to my pc that is on my office and use it remotely, i know there are programs to do this i just cant get the right words to find them.
can anyone help me out on this?
thankx

** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done

irus said:
** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done
Click to expand...
Click to collapse
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.

apd said:
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.
Click to expand...
Click to collapse
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.

ltxda said:
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.
Click to expand...
Click to collapse
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.

leoni1980 said:
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.
Click to expand...
Click to collapse
Of course, this only applies if you are not behind a corporate firewall using NAT or other dynamic IP behind the firewall. Also, if it is a corporate network, opening port 3389 may be (a) very difficult to convince your IT dept to do and (b) not very secure!
If one iof the dynamic dns systems works for you, you might try dyndns.org

Remote Desktop on WM6.1

Anyone has a step by step guide on how to use remote desktop to control ur PC from your Titan? I just dont know what to put for all these fields.

for easier setup, use logmein.com, its free and works from the titan. Do it all the time, great for getting around pesky firewalls and complex network setups.

hey I do use logmein.com for work.. How do i use logmein for mobile? Is there a mobile version? or u go in through opera?

240sxer said:
Anyone has a step by step guide on how to use remote desktop to control ur PC from your Titan? I just dont know what to put for all these fields.
Click to expand...
Click to collapse
This how I use it when connecting to my computer at work.
Computer: IP Address
User Name: Domain\vane0326
Password: xxxxxxx
Domain: Your Company Domain name
For the IP Address I had to go into my company firewall and link my internal ip address to a external ip address. When connecting to your company computer use the external IP address.
There are various ways to do this but this is how I use it.

vane0326 said:
This how I use it when connecting to my computer at work.
Computer: IP Address
User Name: Domain\vane0326
Password: xxxxxxx
Domain: Your Company Domain name
For the IP Address I had to go into my company firewall and link my internal ip address to a external ip address. When connecting to your company computer use the external IP address.
There are various ways to do this but this is how I use it.
Click to expand...
Click to collapse
Be careful about opening the remote desktop port (3389) to all inbound traffic. There are some serious implications for your network security.
LogMeIn is much safer and totally free. It also works with non-static IP addresses. Visit from your computer first and set the program up there, then visit from IE Mobile and set it up on your phone.

wifi network questions on HTC HD2

Hi,
Using a HTC HD2 I am trying to access my home network via WIFI (WPA2/PSK - AES). Some of it works, some of it doesn't and I was hoping some of you would be able to point me in the right direction:
I can connect to intranet pages (for instance utorrent web interface) via IP, but not via hostname.
I cannot connect to network (smb) shares at all, either via IP or hostname.
A program which requires the hostname to work (since I use it over Hamachi VPN as well as locally and don’t want to change the IP based on how I use it) does work over Hamachi and not over WIFI.
I'm quite confused
Any help would be greatly appreciated!
Cheers,
Elco

Sounds like your DNS isn't working. Do you have custom DNS servers configured in the "Name Servers" tab of network card config?

Yhanks for responding!
It should get it from DHCP (though I have tried assigning a static IP and dns, but this gave the same result)
Also, I have another older win mobile device, and with the same setttings it does allow me to access the network shares (by IP and hostname)
I've combed all settings regarding wifi and network, but since they are the same I am guessing it is probably a different at the registry level?
The HTC HD2 does have 2 broadcom wifi adapters mentioned though, a normal one and one with a DHD postfix.
Cheers,
Elco

@Talisman_: same problem here. have you solved it?

Exactly same problem on xperia x2. I just set on manual temporary.

Are you using Hamachi on your phone?
Did you have this problem prior to installing Hamachi?
The reason being is Hamachi installs a network interface which exists whether or not Hamachi is running
You may want to check your Data Connection settings and see if it has applied the "requires a proxy" setting

What are you using as your DNS server though, that is the question.
If it's your broadband router, then chances are it won't be able to serve DNS requests for internal devices (ie computers on your home network).
If that's the case, you'll need a proper DNS server (get an old PC and install Linux) and create a local domain such as home.local, or if you've got a registered domain, you can even set it up the same (domain.com for instance) just tell the DNS server it's the domain master.
It's been yonks since I played around with Linux so I can't tell you how, much easier with Windows Server
Some people advise against using the same public domain name as an internal domain name, but it just means you add A records for any public addressess such as WWW.domain.com or mail.domain.com if it's accessable outside your network as well as inside.
Alternatively, if you're only going to be accessing them via the home network then you could try adding a few hosts to your registry (use the windows calc or similar to convert each IP address number to Hex)
http://windowsmobilepro.blogspot.com/2006/04/etchosts-file-equivalent-in-windows.html
As always, you modify the registry at your own risk.