Hi all.
I want to write my own app to do backup of sms and mms. The need for writing my own is that I want to also post it to my own server after backing it up, hence I can also download the backup directly from the server.
Using MAPI I have no problems retrieving the sms's. I can also get the sender, subject and received time for the MMS inside the MAPI database, but I cannot find the link between the MMS message within the MAPI database and the acutal DAT file (containing the SMIL) that resides in a folder on the device.
Can any of you please tell me how to link up the message with the DAT file?
Thanks,
Torsen
I personally got no success installing both Qtek and i-mate .CAB files, provided to setup my Operator settings (TMN in Portugal) into a Qtek9000!
So, need to repeat the manual procedure, everytime I reinstall the unit. :evil:
It runs well for the MMS client settings, but not for the 'internet GPRS', 'MMS GPRS' and 'WAP GPRS' settings, which do not get into effective configuration.
Examining the correspondent .CAB files, also realised that 'MMS Client settings' are installed through a .REG method, while remaining settings are defined into a .XM file (CM_Entries.xml), despite they seem to be registry tweaks as well.
- Anyone with similar experiences?
- What may be getting wrong with these .XML setups or .CAB files?
- How to install/load settings directly from a .XML file, without using it into a .CAB?
- Why the operator settings (and others?) are always set via .XML and not through regular .REG files? Not possible?
Can I use a .XML file to do the same as a .REG file, and vice-versa?
How to load the .XML settings, without of a .CAB file?
Why use .XML files?
What does .XML files do, that we can't do the same with a .REG file?
Hi guys,
Question....does someone maybe know the registry settings to enable the mms folder in WM5?
Sure I know I can use a cab for it, but I am trying to find out what registry settings are needed to enable the MMS folder without installing the CAB file.
I am looking for the specific settings for a HTC Wizard, but settings from another HTC phone would be a good indication to start (I hope).
Regards, thanks and to all a very happy new year (of developing),
Molski
One of the CAB files I posted (I think) had it in it.. And I know I've seen the keys around here somewhere.. Unfortunately, I don't have an 8125 any more though, and I'm not quite finished with poking around my 8525 yet (planning on unlocking the ExtROM today so I can start deciphering CAB files).
I'll let you know what I come up with from the 8525 perspective.
I found your CAB file and I extracted it.
Unfortunately the same results as I have with the T-Mobile MMS Folder cab....it doesnt work
I install the CAB file, the MMS folder shows up, I export all the MMS Registry settings, do a hard-reset, import all the Registy settings and no MMS folder showing up.
I think it has something to do with the following registry values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
After a hard-reset and installing this CAB file every time the values are different??
Could be. I'm honestly not too sure. But whateve reg values are in that CAB I've used over countless resets.
I'm getting ready to walk out the door in a few minutes, but when I get to my buddy's place I should be able to sit down for a few and look at the CAB and see what's in there again and go from there.
Take a good look at the values I posted....I really think it has something to do with those values changing every time you install the cab after a hard-reset.
Thanks!
Molski
Which CAB file are you using? I see a couple that I've posted.. Want to make sure I'm looking at the right one..
Beside having the MMS Folder to appear, I think you should have a service provider cab in ExtRom to configure to the right Service Provider's Server or you have to manually key it.
I am not sure if Wizard is the same.
cab files like mms folder and contain the values of certification on them it cannot be integrated so far, i tried,when you install a cab like mms, it writes several numbers to the cert part of the registry,once you install another cab that contains cert values ,it just overwrites the old values .
this is why the service providers never integrates such settings.
all this values that the mms cab writes to the registry can be found in the .XML file ,but must of them are build in the setup .dll ,the dll is coded with a set of instructions ,and this are the one that enable mms.
lets say you manage to extract all the reg settings for mms,then build into a custom cab this is all fine,but now you also want to integrate lets say..smardialing,well u cant because when you export the reg settings from one it overwrites the other because they use the same address in the registry.(cert}
I already have integrated SmartDialing in the default.hv and it works, will install a few cert apps and check if Smartdialing still works.
The only thing that is giving problems so far are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
I checked every settings that is created by the MMS folder Cab, but only these settings will change after installing the CAB.
But after reading your answer Faria, I think we cannot create inbox folders for whatever via the default.hv, is this true?
Thanks,
Molski.
molski said:
I already have integrated SmartDialing in the default.hv and it works, will install a few cert apps and check if Smartdialing still works.
The only thing that is giving problems so far are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
I checked every settings that is created by the MMS folder Cab, but only these settings will change after installing the CAB.
But after reading your answer Faria, I think we cannot create inbox folders for whatever via the default.hv, is this true?
Thanks,
Molski.
Click to expand...
Click to collapse
Smart Dialing working?
When?
How?
Where?
Please tell us.
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
molski said:
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
Click to expand...
Click to collapse
yes smartdialing works .i did it a month ago....but mms no.
once you put the cert settings for one of those cabs into the default hive its fine... but if you put another cab settings from another program into it,it gets overwrited .
molski said:
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
Click to expand...
Click to collapse
Does this works on Universal Helmi Aku3.5 V1.3?
Hi to all, I need of a FTP client with text editor included for my HTC P3600,I need to modify configuration file on WAN ( DreamBox file configuration),now I'm using free WCE Ftp client it's excellent .very fast but it hasn't a text editor included to modify files, I must to transfer file on my HTC modify with CEdit and reupolads it ,it's realy uncomfortable.
Do known anyone a complete ftp client with text editor
Hi,
I installed Androkkid 1.2.1 and put a shortcut to "Messaging" on the screen. Unfortunately if I click it, the standard Windows Mobile Messaging-application opens and I have to click again at "Outlook" to open the In-box.
The path to messaging is \\Windows\Startmenü\Messaging.ink (german version).
My question is: Is it possible to add something like a parameter to that path to open the email or sms In-box directly?
Thanks in advance!
Create a file with Notepad in your PC and paste the desired text line (according with what you want):
SMS
Code:
20#"\Windows\tmail.exe"-service "SMS"
MMS
Code:
20#"\Windows\tmail.exe"-service "MMS"
EMAIL
Code:
20#"\Windows\tmail.exe"-service "ActiveSync"
Rename the file (change the extention from .txt to .lnk) and copy it to you pocket PC.
Here's a big list of links (this info is from there too).
Perfect! That's what I was looking for!