Today I had this problem for the 2nd time. My Qtek 2020 was in my bag and the phone button got pressed, calling my friend for 51:18 minutes!! How do I prevent this from happening?
There are (at a minimum) two ways of doing this.
1. Start -> Settings -> System -> Button Lock -> "Lock all buttons except Power button" -> OK
2. Place the device in a case (I use the Seidio hard plastic XDA case) while not in use to prevent inadvertent button-press.
2 is easiest, but 1 is pretty much guaranteed to work.
the case
I received a leather snap-case with the device. I believe the inadvertent press of the button (or tap of the screen) may have happened while I was using the device (CALENDAR, TASKS, etc.), although I don't know how. I do know that when I press the green talk button to switch over to the phone, it seems very easy to press it twice and redial the previous number.
As for button lock, how does that affect my ability to answer the phone when it rings?
Button lock does not affect your ability to take a phonecall.
The phone turns on when you get a call, then you can simply press the green button.
I am still wondering why button lock is not activted by default...
I've put my phone in my pocket before, and then found it to have powered itself back on almost straight after being powered off. Then, in my pocket alongside the Jabra and the wired hands-free, I get all sorts of wierd scrawled notes & stuff. I had a new Task yesterday, and at one time my Personal Details had a load of gibberish written all over the place.
The Faux-leather thing the XDA2 came with just seems too bulky to me.
Best bet is to power it 'off,' leave it on the side for a minute and power it 'off' again if it wakes up on its own. And, if you leave it in a bag, check for messages/missed calls when you get back. And make sure to turn it off even after a call you don't pick up.
Related
Anyone know how to stop an accidental clicks or other screen presses from taking place when I've got the phone to my face during a call?
Si.
I use a freeware app called Screen Off, download it here:
http://www.handango.com/PlatformPro...latformId=2&N=96806&productId=125781&R=125781
Basically when I make a call or answer a call I have screen off assigned to a button, so I can then press the button to turn the screen off. To turn the screen back, just press the power on button.\
Hope this helps,
Or maybe you could simply turn PDA off with a single power button press...and when you're finished simply turn it on. Remember that the radio is always running (unless you hold the power button for 5s).
My screen turns off automatically after about 20 seconds when on a call - haven't set it to do this - in fact can't even find an option - it just seems to be the default setting. The only way to turn it back on is to press the green or red buttons, or just flick the volume control either way - works for me. (O2 XDA Mini s)
S.
Macrinus - thx that works a treat.
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
macrinus said:
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
Click to expand...
Click to collapse
Yeah, it is weird - bit annoying, but sensible really to save the power - Perhaps its just the device turning off then, with the phone still running .... comes back to life with a flick of the volume though - touching the screen won't re-activate it. Will have to time it a bit more closely !
S.
Radio on screen off
I too turn the device off when I'm on a call (although I only discovered I could without ending the call this morning). Otherwise, my ear activates the Start menu.
Doh!
if only the backlight is turned off, the screen WILL still react to face contact!
I understand that either the device (less the phone side!) via power button, or the screen must be turned off via an utility.
It may exist, but I know no proggie able to lock the touchscreen without turning it off!
(pitty, my axim X50v can lock the screen without turning it off via a Hw sliding button9
Hi Guys.
I had a quick search for this but other than posts about the button lock "when off" thing, which I have enabled, I can't find a fix for this, what I consider to be, bug/fault/failing.
The thing which really really gripes with me is the dumb buttons all around the edges of the Universal. Sure, when the phone is off, they are disabled, but what about when the phone rings ?
I grab the phone but have to try to dance around any and all buttons because as soon as it gets a call it wakes and the buttons become live.
I've had to forget having the phone in it's case (I tried a krussell case for it but it stresses the screen hinge) because you have to wail away on the keys in order to get the thing out the case.
I could assign the functions of the buttons to <none> but it kinda negates them even being there.
A way to disable them when off and also on call receipt would be just the ticket.
gee, I really hate this aspect and if I lose another call I swear I'll throw it out the window.
I dont really understand your concerns.
I use button lock, and they do lock without a problem.
When my phone rings, the phone call buttons are active to accept or decline.
I also use the krussel case and didnt find any hinge stress, and had easy access to the answer and hangup buttons located on the hinge. mind use, i usually keep the clam closed so i had not problem accessing any of the buttons, ever.
I have also extended the ring time from the 10second default to the 30 second maximum available, so I am not in any rush to answer the phone in the first place, and dont need to visually see who is calling as I accept all incoming calls, or decline all incoming despite who it is. so simply pressing the green button located on the hinge is easy.
so alas, I dont understand your problem.
But when your phone rings, the other external buttons are also active, camera etc. So, when dragging the phone out of a pocket or it's case, you are almost bound to catch one of those butons or, as has happened, the Red call-end button on the side.
marcuskeeler said:
But when your phone rings, the other external buttons are also active, camera etc. So, when dragging the phone out of a pocket or it's case, you are almost bound to catch one of those butons or, as has happened, the Red call-end button on the side.
Click to expand...
Click to collapse
I tested this on mine and whilst you are right about the buttons being active, the phone answer/ignore window stayed foremost regardless. In my case i tested a button I have assigned to notes and the notes window appeared underneath the call window.
As with previous comments I really don't see the issue as anything more than trivial, especially considering the buttons size and pressure required to activate it. Perhaps someone will (or has) write a little utility to disable the buttons except for the phone answer/ignore. In the meantime I wouldn't worry about it.
Using a SPV M5000 and keep it in the leather/elastic holster provided with the phone, and have the same problem with loosing calls whilst extracting the phone from the holster. My rings before going to answer service is set at 30 secs, and that makes no difference.
Just need to find a decent case which doesn't interfere with any of the buttons.
sipat said:
Using a SPV M5000 and keep it in the leather/elastic holster provided with the phone, and have the same problem with loosing calls whilst extracting the phone from the holster. My rings before going to answer service is set at 30 secs, and that makes no difference.
Just need to find a decent case which doesn't interfere with any of the buttons.
Click to expand...
Click to collapse
You could try this case. I loved my previous xda2 case and this is the closest I could get with a belt clip. Phone rings, I unclip, check the green (middle) phone button, press and answer. Finish and press red (end) phone button and reclip.
BTW I'm not at all related to the vendor.
About 1/2 of the time that I pull my jamin out of my pocket when I'm getting a call, I hit a button of some sort which shunts the inbound call to voicemail. Very very annoying.
I have my buttons all on the locked setting except for power, but when the phone rings - all bets are off and every button is live. Bad design.
Thanks in advance!
I too had the same problems ...I just get the photo framed and what happens .. I press the power botton and turn the thing off! Very annoying.
but you do eventually get used to remembering to not pick it up by the sides wher ethe buttons are.
Buttons
I asked the same thing last week (see link). The suggestion did sort of work, but was not slick enough for practical use. Would be nice for a proper solution (such as the 'menu*' on the Nokia).
http://forum.xda-developers.com/viewtopic.php?t=41956
I use my 8525 in a side case and when the phone rings I usually pull out the phone to see who's calling to decide if i want to answer... though 9 out of 10 times i accidentally hit the answer button. I always lock my phone via device lock on today screen... is there a reg hack or setting which will allow me to disable or customize ALL the buttons (when in lock mode) on the 8525 so I don't accidentally answer. to me if i were to assign a button (ie power or ptt) to only be allowed to accept a call (when the phone is in lock mode) that'd be great. I'm tired of auto answering and what good does a device lock do if you can easily auto answer?
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
abricko said:
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
Click to expand...
Click to collapse
Sorry you're not getting replies and I have no solution of the type you are looking for sadly. I've tried to replicate what you say happens but it's not easy!!! My key is not that easily pressed and I always put the device back with screen towards my body - my fingers don't seem to get very close to the green button.
This is probably daft to suggest but have you checked the setting that lets you specify auto answer within X number of rings - just in case it's answering the call by itself!!. (apologies if you checked this setting already!!)
Mike
This may do what you want...
http://www.pocketmax.net/smf/index.php?PHPSESSID=da5459e6aadc9c38d5a74b0276782091&board=19.0
Auto Answer is not set... the problem is (and it's a problem with the phone design) when the phone is locked none of the buttons respond until you hit the power button and then unlock the phone via the screen (which is good).
However when there is an incoming call or reminder the screen turns on and then a few buttons are active on the phone (send, end and the two soft keys seem to be). So when a phone call comes in, if the phone is in your pocket or the hip case while reaching for the phone it's VERY easy to accidentally press any of the active buttons and then accidentally accept or reject that call.
I've searched everywhere I can think of and I find little mention of this problem and no mention of a fix, most screen lock replacements only do as much locking as the WM5 built in lock does. The button re-activation after an incoming call is probably something built into the hardware. That's all I can deduce from this.
Thanks for the responses I've received so far.
I am on my fourth PDA phone and have used both Win Mobile 2003 and WM5. They all behaved this way and it is one of my biggest complaints with the Windows OS. I have seen apps for Palm that solve the problem. How hard could it be to have the option to only wake with the press of the power button?!
not hard at all, but the again its M$, i am surprised these devices to have ctrl-alt-del keys.
Hi, everyone. My Tytn when is on a phone call, switch off the screen. I can't find anything like this in the forun (perhaps I don't look for on the right way).
I not find how to disconnect it on the configuaration of my Tytn. Does anybody knows how to get the screen on during a phone call.
The problem is when I'm driving, and on a phone call, lose the screen and my navigator instructions. It's is a problem, cause, I must to switch on the PDA and reconnect the navigator. (the people alwais call on the worst moment , I don't know why?)
Thanks to all.
Start>Settings>System>backlight>Battery Power, then take the tick off the selection "Turn off backlight if device is not used". Do the same under the external power tab.
At the bottom of the screen you should see a MENU option. Click on the Advanced tab then take the tick off the option "Turn off device if not used for ...."
This lot should solve your problem. The downside is you might then start to use more battery power as the device leaves itself in an always on position.
VCheers
WB
wacky.banana has offered some good advice. But IF your problem happens ONLY when a phone call comes in, then I think you might have phoneAlarm installed and configured to do this. pA includes this feature in order to let folks listen and speak, with the phone against their ear, and not fear starting up myriad applications as their ear touches the pressure-sensitive screen.
Just an idea.
-pvs
just press the button
just press the standby button, or any button to turn the screen back on,
id rather have the option to turn the screen back on, rather than having it on all the time especially if i am out and about, and as we all know, battery power on the tytn is a precious commodity :_)