I have updated the ROM to T-mobile 4.016, but it did not work stably. I want to flash it back to 2002 Rom, but when I were flashing, it always shew the message " the program have been closed by remote computer", and I could not going on....
Related
Hi new user and abuser already!
I've just purchased a XDAII which I was told would log onto inetnet from today. Nothing happened so I've tried to download upgrade from O2 website. Halfway through upgrade(which wasn't probably required) it crashed. Now it wont do anything. It won't even switch on. When I try to download upgrade on website now it says something about ROM from vendor! HELP what do I do or have I completely ****ed it up!
Cheers
Message
This is the message I get when trying to upgrade;
ERROR 100 Model ID ERROR
The Rom image you are trying to use is not designed to work with your pocket PC. Please check the vendor website and download the correct Rom update.
following this guide should make you avoid getting that error
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
SERIAL v1.06
Dont understand what its saying! Is there a simpler way? O2 say if it doesn't reset after Hard reset I need to send it back!
ok i've done a bit of searching and i'm pretty sure its software related.
i got an mda pro from when i booted the phone up its had a o2 splash screen, so im assuming its had its software updated. so the phone works fine for about 6 hours or so but then it starts tt freeze up, propgrams stop responding and the phone wont do any thing. i left the phone like this for a few moments then i got a txt and the phone seamed to be working fine untill i went to use the camera and i got "the file camera cannot be opened. either it is not signed with a trusted cert or one of its components can not be found you might need to reinstall or restore this file".
ok so i had a look and found the Available Universal Versions and Upgrades
the thing is i'm not sure which is the best to use or how to do it.
what would you guys recomend i do ?
thanks
MDA Pro with O2 Rom?
Seems so that there is other Rom on it. Normally, this is not a Problem, but who knows, what was changed in this Rom.
I would recommend to download new Rom and install this.
Try http://www.my-xda.com/xdaexec_soft.html
Thats got the latest XDA update.... give it a go and then get the new 1.09.00 radio update too...
Hopefully that will sort you out!
chears i'll give that one a go and see what happpens. fingers crossed
ok so i downloaded the Xda Exec ROM v 1.13.188 from the above site followed the directions in the pdf file, connected the phone and made sure there arnt any programs running in the backgroung. when i try to runn the application to do the upgrade it says its trying to connect to the phone then gives
"error 201: get device data error
can not get device data
please make sure device is connected and run this update utility again"
only problem is that it is connected or so ms active sync says.
any ideas whats goign on or is there another way to update the software ?
thanks guys its apreciated
ok so i managed to get past that stage but
now i get
error 102 ce image file check sum error
the rom image file to be used for the update is corroupt. please download the correct device software update utility and try again.
i have no idea what that means any sugestions ?
@cusaeng, can't help with the ROM update but your initial problem of problems after 6 hours is typical of the Universal when its running low on RAM. Use an app like GSPMaigc+ which can really close processes and reboot once a day (obviously once you solve the ROM issue).
chears i'll look in to that program once i get the rom issues sorted
i've trued downloading a version of the jas jar rom and that give the same error message about being unable to get device information.
when i flashed phones befor eg a motorola a1000 you had to get the phone in to bootloader mode then use a progran to flash it is it a simaler process with the mda ?
i really dont know if i'm doing anything wrong or not
Hello !!
I have qtek 1010 german version! After i read the links i decided to upgrade the rom version, because i barely manage in english, not to metion german.
I downloaded a rom from http://www.romkitchen.de, i complete the setup with no errors and i thouht it was a success. Now in start menu i only have Recent Programs (with no access to tap on it), Today, Find and Help, and the screen logo xda-developers.com. Cant do anything, the best result when i tap something its : "No program memory available. Tap Start>Settings>System tab>Memory, stop programs that did not automatically stop, and try again". But in start i have nothing
I downloaded another rom version 4.01.12_ENG, but now i can not connect the pda with activesync, so i cant make another upgrade.
So, please, help!!
Thanks, Regards and excuse my poor english!
PS: #1 Was posted in a wrong section i think!
Sounds very strange.
You have done a reset after the update?
What ActiveSync VErsion are you using? WM2003 requires an Version i think greater than 3.7.....
Stefan
I was using at that time Activesync 4.2, but i downgrade it to 3.7 after the failure and still no connection. Now i'm using again 4.2.
I did the reset (after i saw the result of the upgrade i thnik i made another 4 or 5, think this will have no negative effects, anyway its as worst as is possible).
And if i remember well i did a reset with holding the power button as the upgrading soft says.
flash with sdcard
Go here http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD this will let you change the rom without using active sync
Hi guys,
Recently I updated my XDA Orbit with the new WM6.1 Diamondish ROM. Everything went great until I tried to install the Oops 6.1 ROM. Before trying to install the Oops ROM I tried to unlock the CID just in case (with your Artemis_USPL tool)... Half way through the setup screen displayed an error saying "Connection error... Please check the USB connection...". Just to clarify I never managed to install the Oops file.
Then I tried to install the original XDA WM6 ROM but with no luck as I got the same error again. Then I tried to start the bootloader manually (by pressing the voice recorder button along with the Reset one) and instead of the usuall 3 colour screen I got a blank white one. Afterwards the phone froze and I had to reset it so that I can use it again.
I did a small search on your website but because I wasn't able to find another similar case I decided to start a new thread.
Currently my phone works perfectly fine with my previous Diamondish ROM, but I seems that I can't install anything else.
Could it be a corrupted bootloader? If so, how can I fix it?
Any help will be much appreciated.
Thanks in andance!!!
Take out your MicroSD card and then try and flash
You were right! Once I got my memory card off my phone, the bootloader started as usual. Cheers mate!!!
I tried to flash a 6.1 rom to my shadow, but that was back in the day when my WMD did not work. When I tried to flash it, it got stuck in the bootloader mode. It took me awhile to research how to fix it, but eventually I got the re flash of the orignal t-mobile rom to work. Im wondering if I now that my windows media device software will work, if the flashing will? I'm a bit paranoid as I have no back up t-mobile phone and wonder if 6.1 is even worth it.
Also, the issue came because during the flash it said make sure it is connected to active sync, but I have WMD because I am on Vista.
What do you guys think? Should I be able to upgrade the shadow or should i just leave it alone