ok, i have installed the special edition rom for my xda1 and its a definate improvement over the original rom..
but i noticed that the window mobile 2003 upgrade is available from o2 and wondered whether it was significantly better than the special edition?
of course, if there was a xda-developers special edition rom based on wm2003 that would be the best solution... :?
Nas
There are many WM 2003 ROMs and most of them works quite fine ... try the kitchen at www.yorch.net or http://lumpistefan.dyndns.org/
nasman said:
but i noticed that the window mobile 2003 upgrade is available from o2 and wondered whether it was significantly better than the special edition?
Click to expand...
Click to collapse
Where is the WM2003 upgrade from O2??????
Give me alink to download please...
Stefan
I didnt know there was one, anybody else seen it?
nope i cant see it.
my bad
soz, not from o2, just the ones from other providers that are floating about.
Re: my bad
nasman said:
soz, not from o2, just the ones from other providers that are floating about.
Click to expand...
Click to collapse
Just do it, upgrade it! I upgraded my Siemens SX56 with AT&T to 2003 and than cooked the rom from Yorch to unlock. By the way, it is a very good rom, thanks Yorch.
I did it with SD cards one of my XDA's, it worked perfect and quick: saved 2003 rom on one card, cooked Yorche's on another. The saving and installation was done through the bootloader as discribed in the proceedures in frequently asked questions section. The extracting and saving of Yorche's rom was done through OSImageTool in XDAtools into an SD card inserted in a USB card reader/writer (Inland 9 in 1 card Reader/Writer, $10 at Micro Center). The battery was fully charged on my SX56 and the flashing of rom's back and forth was done without the XDA being pluged to power unit. I tested the unlocking with a T-Mobile card, it recognised it, I made some phone calls with no problems, kept Yorch cooked rom for two days to get to know it and then flashed it back with my SD saved 2003 rom in my friends apartment just to show off how easy it is to flash the rom. it worked very well (it took about 5 minutes).
The 2nd SX56 was done all through ActiveSync with the XDA and card reader/writer pluged in and all synchronised (allscreen savers, power savers etc on PC and XDA OFF and battery charged). This XDA still had the original 2002 rom. The unlocking went very smooth. I did a full back up of the rom with ActiveSync. Since the cooked rom is PW10A1 and mine was PW10B1 I needed to get back my original rom to the XDA. The restore didn't work because it is a different partnership. So I flashed it back with my SD saved 2003 rom in a card reader/writer and OSImadeTool through ActiveSync. Everything was fine all the way to hard reset. I waited a minuteor so and did a hard reset and nothing happened, did it couple of times, nothing. It would not restart. I pressed the power botton and it went to bootloader mode. I did soft reset and the unit goes blank, dead. So I inserted the SD card with my 2003 rom into the XDA's memory slot and did the the bootloader mode, it took it, I flashed it. And now I have my 2nd SX56 with 2003 rom and the old radio stack ulocked working like a champ. I tasted with T-Mobile card and it works instantly, no configurations needed. Now I have to do a complete upgrade.
After all I like the new 2003 better but with some of the programs from Yorch Kitchen rom, which I installed and they work fine.
You, ladies and gentlemen, at XDA-Developers are the greatest thing that happened to the mobile devices community. I honor you and thank you. And Peter Poelman, you are the wizard, thank you.
John
can you guys show me how to cook to ROM or and link to download the file upgrade from wm2003 to 2003. Thank a lot . I'm using O2 XDA 2002
tommy_kiss79 said:
can you guys show me how to cook to ROM or and link to download the file upgrade from wm2003 to 2003. Thank a lot . I'm using O2 XDA 2002
Click to expand...
Click to collapse
Look here for the answers:
http://wiki.xda-developers.com/wiki/FAQ
and here to cook the rom:
www.yorch.net
check what you want or don't want and click Build ROM now, after it is done click Download. Before you build and download choose which file you want, exe or nb1. What ever you do backup your original rom preferably and safer to an SD card either through OSImageTools in XDATools and ActiveSync or the mode and the SD card pluged into your XDA
bootloader, and read the forum in details...
The new Mobile 2003 you can get at any of the provider or manufacturer of XDA's: www.T-Mobile.com, www.ATTwireless.com, www.My-Siemens.com, Microsoft has a list of manufacturers that have upgrades - www.microsoft.com/windowsmobile/resources/
Make sure you use the right one for PW10A1 or PW10B1 what ever your device Model No. is...
Good luck, John
saracen said:
The new Mobile 2003 you can get at any of the provider or manufacturer of XDA's: www.T-Mobile.com, www.ATTwireless.com, www.My-Siemens.com, Microsoft has a list of manufacturers that have upgrades - www.microsoft.com/windowsmobile/resources/
Make sure you use the right one for PW10A1 or PW10B1 what ever your device Model No. is...
Click to expand...
Click to collapse
John (and any others out there),
I hope that I'm not asking something here that is covered in some faq on this board and I think I've read them all, but...
I see mention of a lot of versions. 4.00.21, 4.00.01, A30.05, A30.09 etc...
Is there someone that can tell us new guys a little more about these? IE, what is it exactly, 2003, 2002, beta, final, alpha?
I recently bought a Wallaby, and want very much to use the MS Voice Command. Therefore, I have a definate need for a 2003 rom. I have read and reread the forums here and have a good handle on how to flash my rom, but I'm so confused as to what the best (read most reliable) rom to install, as well what radio version would work with the given rom choice. I'm not necessarily asking for a recommendation, but perhaps a nudge in the write direction.
Sorry to dump on you in particular, nothing personal either mind you! It's just that I'd love to read a FAQ for the different versions and what might be expected from them I guess. (I hope like heck I'm making sense here!)
Thanks!
Larry
Hello,
Actually, the only difference between ROM versions is bug fixing with newer versions, but the only significant factor is whether it's PPC 2002 or WM 2003 ROM.
For upgrading, I may recommend TMO 4.01.00 (my personal preference) or A30.09 (with a minor sound issue). If you need to unlock your device you must start with PPC2002 3.17 ROM first then select any WM2003 later.
There is no connection between the ROM and RSU. However, the RSU is the most sensitive part in the XDA. If you have a functioning RSU ... do NOT touch it!!
Last, get a SD card and take a backup ... it's safer and you can use the SD to upgrade as well.
Good luck ...
This is to Larry,
All these replies take you through the right directions. I have two Siemens SX56 devices with AT&T Wireless, both PW10B1, Pocket PC2002 (Ver. 3.0.12039), ROM Ver. A.20.17 ENG, RADIO Ver. A.20.10, 32MB Rom.
1st one I upgraded the day AT&T and Siemens released the Mobile 2003 free upgrade. As much as people complained, cursed and were distroying there SX56 devices ( what I read on AT&T forums) I never had any problems, and as a matter of fact the more I used the device the better it became. I played with it for about two weeks and then I decided to unlock it. So I placed my SD card into the SX56, started the bootloader, downloaded the original 2003 Rom image, soft reset the device. I cooked the Special Edition Rom based on 3.17.03 O2 ROM in Yorch Kitchen, I built the nb1 file, I downloaded, extracted with WinZip, put it on another SD card, put the card in my SX56 device, started the bootloader, flashed it, did a hard reset. It didn't ask me if I wanted to unlock it but the XDAunlock program was there, I taped it, it asked me if I want to unlock, I did. I checked it with a T-Mobile sim card, made a phone call with no problem (I tested with the same card before and after, before asked me for the pin number and after it logged in to T-Mobile network). I used it with the Special Edition Rom for about a week to see which programs I liked and wanted to install on my device after I flash back to saved Mobile 2003 Rom. I flashed it back with the 2003 Rom image. I was on the road, away from power supply, my pc, usb ports etc. Just the unit with its battery charged up, the SD card and the bootloader. It took 5 minutes.
My 2nd SX56 device I did before the 2003 upgrade, the original 2002 still there, with ActiveSync, OSImageTool in XDATools, SD cards, card reader/writer and nb1 file. This time I overlooked the saving of the original 2002 Rom and it went directly into the flashing with the Special Edition Rom cooked in Yorch Kitchen. I unlocked it, tested with T-Mobile sim card and flashed it back with the the Mobile 2003 Rom image saved from my 1st SX56 device. It didn't want to wake up after the hard reset. It kept going to the bootloader mode. So I inserted the SD card into the SX56, started the bootloader , flashed it back again with Mobile 2003 Rom, did a hard reset. It worked. Now I have my 2nd SX56 with new mobile 2003 Rom but old, the original Radio Stack from Pocket PC 2002. It works fine. The working is like the Upgraded 2003 device. Maybe with the older radio Stack is more stable on the signal, and I don't know for sure because I did not tested, only what I read and the people having problems. My preference is a total upgrade, the Rom and the Radio Stack, I noticed that the audio quality is better with the total upgrade, specialy when on the speaker phone during a phone call.
What ever you do save the settings and the Rom images and you do the right PW10A1 or PW10B1 (the Special Edition Rom is PW10A1). Make sure all the screen savers, power savers, sleep modes etc. are turned off on both the PC and the XDA device.
Good luck, John
saracen said:
What ever you do save the settings and the Rom images and you do the right PW10A1 or PW10B1 (the Special Edition Rom is PW10A1). Make sure all the screen savers, power savers, sleep modes etc. are turned off on both the PC and the XDA device.
Good luck, John
Click to expand...
Click to collapse
Thanks, guys!
I kind of knew that the differences were a matter of bug fixes, what I wasn't sure of is which is 2003 or 2002. I'm going to keep reading here of course. This is a fantastic site to be sure!
So, bottom line is I guess I'm just going to pick a couple of them and flash them and play with them so which works the best.
Many thanks again guys! Larry
Larry,
Yes, exactly. I forgot to say that my new rom is an AT&T- Siemens: ROM Ver. A.30.09 ENG, Radio Stack A.33.02. The previous Rom version had a band switch (900 for Europe or 1900 for Americas) in the Settings and under Phone but now with the new it has an auto configuration which I like better. I can always search the network manually. By accident I found that if you set it to manual and don't have a network specified or any signal strength showing as long as the phone is turned ON, I can still get on Internet.
Good luck, John
One final ?
Guys
Is there ANY version of the W2003 ROM that comes with the Wmodem (or similar) application ?
I first came to xda-developers when I was trying to use my Qtek as a modem....thereafter we saw the O2 and Qtek PPC (2002) upgrades that brought in the Wmodem utility.
That seems to have disappeared off the priority list for most people these days, though.
Cheers
Sands
Sandyind said:
That seems to have disappeared off the priority list for most people these days, though
Click to expand...
Click to collapse
IMHO, the new PCs/laptops with either built-in WiFi or WLAN functions or with equivalent PCMCIA cards, or even with SIM module inside, made it out of the wishlist
Re: One final ?
sandyind said:
Guys
Is there ANY version of the W2003 ROM that comes with the Wmodem (or similar) application ?
Click to expand...
Click to collapse
The German Version 4.00.33 from t-mobile comes with the wmodem application
HTH
Stefan
Stefan,
Is there an English version of Mobile 2003 with wireless modem for PW10B1 XDA?
Thanks, John
Can't receive USA Cingular signal 850mhz- Help Anyone?
I've posted on some other forums but no-one seems to have an answer. Can an unlocked AT&T SX56 be adjusted to work on the Cingular 850mhz system?
Help!!
Doc
I have upgraded my ATT SiemensSX56 to Pocket PC 2003. Is it still safe to use the XDA-developers Special Edition ROM v1.2 on this Poocket PC to unlock the SIM?
try the tool at www.xda-developers.com/XDAunlock/ first
XDAunlock
Thanks for the suggestion. That would have been great if it had worked. I tried to run it but it gave me the error “error getting unlock code”. I think that the reason was that don’t have a Qtec 1010 Rom version 3.16.52. My ROM version is A.30.09 ENG. The reason that I put this post out was that I wanted to ask around a little before I ran the XDA-developers Special Edition ROM v1.2 on my ATT Siemens Pocket PC to see if anybody thought that it might cause any unwanted consequences.
It worked for me
As I just mentioned in some other post, I did just that with Wallaby 5.22. I flashed the AT&T ROM to find out the phone was still locked. I flashed the XDA ROM, unlocked the phone and reflashed the AT&T ROM. I can't guarantee it'll work for you but it certainly did for me.
XDAunlock tool works only with ROMs that has wmodem application (no WM2003 has it). XDA ser v1.2 is a good choice for unlocking, but since you are going to reflash the device then i would recommend TMO 4.01.00 for now coz A30.09 has a very annoying sound issue.
Biso007 said:
XDAunlock tool works only with ROMs that has wmodem application (no WM2003 has it). XDA ser v1.2 is a good choice for unlocking, but since you are going to reflash the device then i would recommend TMO 4.01.00 for now coz A30.09 has a very annoying sound issue.
Click to expand...
Click to collapse
Not true in all points.....
The German 4.00.33 Rom have the wmodem application. But the unlock tool do not work with it.....
Tried it already....
HTH
Stefan
HELP ... I was using Rom kitchen WM2003 from T Mobile for many months... I have dropped my XDA I and it hung at boot, I reloaded original ATT rom and phone works but with ANY WM2003 rom (Tried all versions from Kitchen) phone hangs at boot screen. Any suggestions on what to do. I have researched many forums and did not find an answer to this one. (Phone is out of warranty).
Bootloader: 5.22
Works with: A.20, 3.x
Does not work with: A.30, 4.x
Which method of flashing are you using, I found that I got a hung screen if I used mmc memory card for flashing, used an sd card and all was fine.
Using an SD card... I have flashed this device many times with WM2003 roms with no problemes... but now ... it won't load anything but WM2002.
Bootloader tests are A1... no errors.. and I was able to load Rogers ATT (canada) from the Kitchen with no probleme but the rom is full of bugs (cannot load phone module) and any other rom, T Mobile, ATT siemens, etc... don't work.
I was suspecting hardware issue but Bootloader tests are A1.
Weird...
Yanick
ATT Rom Kitchen
Where is a good ATT ROM Kitchen site?
Do you found a solution for this problem? I have really the same. with my XDA.
All 2002 roms are working - none of the 2003.
Any ideas?
Thanks
Henner
i have this problem with some Qtek 1010
it work only with 2002 ver
i tried downgrade boot from 5.22 to 5.15 and the same problem
any solution ??
i have solution!
This really helps. I live in Germany - so it's difficult to come to Toronto!
Cheers,
Henner
upgrade 2003
I have a upgrade for simenes to wm2003 and the rom will be come
version A.30.09 ENG
and the radio version A.33.02
but i can't upload here I tried but no luck send me a email to send is
around 18 MB
Has anyone managed to sim unlock the orange m600 unit
I have tried the lokiwiz from another thread but it didnt work.
rom version is 2.10.1.22 wwe
radio 02.07.20
extended rom 2.10.1.107
operator version 13.10.1.107
thanks
When you do manage it, do share the ROM!
willing to hep
IF anyone is working on this i would be willing to help
Me too ....
I can't unlock my phone to use my two SIMCards
HELP me ...
Please
(It's ORANGE FRENCH SPV M600 !)
Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ones there is no solution yet.
:?
We just have to wait for an updated version of LOckiwiz or aWizard tools.
Ok, had a modicome of sucess with this, converted it to a Imate Jamin and then used the wizard unlocker to sim unlock it. Its works fine for voice but have not got the gprs to work yet. Although i am using a dual sim and this may be the problem.
will let you know as things progress
Has anyone tried the Imei check site (http://www.imei-check.co.uk/m600unlock.php) I know you have to pay for this, but that is still better than having your phone locked to orange (nothing against orange, just that I have an o2 contract...)
IMEI Check
Works ok unlocked mine there yesterday took less than 5 mins
Ok, thanks, i will stand a new version
Right, let me get this straight...
"Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ROMS (i.e Orange M600 ROM) there is no solution yet."
If this is the case, then can we use A-Wizard or the hacked romupdateutility to FLASH back to a pre-AKU2 ROM and then use Lokiwiz to unlock the device, and then flash back to a 'latest AKU2 ROM' (Dopod one is latest and greatest atm) and continue to have a SIM UNLOCKED device???
Please can someone try this? I get my M600 in a week and need to be able to unlock it. Am in the USA atm and need to use a T-Mobile SIM in it.
Appreciate any help.
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
The only problem i have is i managed to disable the gprs connection detection. I think its something to do with the radio update and not quite getting the conversion right. I have been following the instructions from this and other sites and might have made a mistake.
Hopoing t sort this when i get time
I don't understand ???
You can UNLOCK or not ?
You want my ROM for check it and understand why it doesn't work ?
popeyesfx said:
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
Click to expand...
Click to collapse
thanks popeyesfx, but which ROM version did you flash to and how did you do it? Was it the new AKU2 Dopod rom specifically?
Did you have to use A-Wizard first to change CID or did you use the hacked romupdateutility to flash the rom from Orange to Dopod/I-mate?
Thanks
I used the modified update util of the ftp site and then used the latest jamin rom from the ftp site, this updated fine and i didnt get any operator errors.
I then used lokiwiz and it unlocked the sim fine.
just as an aside, the problem with the gprs turned out to be a thing with the orange unit itself. I tried a non flashed on and it has the same problem (doesnt show the connection but will connect to it fine when triggered by other software)
there is another link on here that gives you a full discription on how to convert the unit just cant remember it (old age im afraid lol) :lol:
Which ROM to install on an Orange SPV M600?
Just got a new Orange M600, herebelow is the device info;
ROM version: 2.10.1.22 WWE
Rom Date: 2/16/06
Radio Version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Operator Version: 13.10.1.107
IPL 2.10.0001
SPL 2.10.0001
I used machinagod lokiwiz 0.3 to SIM unlock my SPV M600.
Now;
1) Will my phone be SIM Locked again if i did a Hard Reset?
2) Which ROM is the latest and best and can i install it on IPL/SPL 2.10.0001? If yes, then how?
merci pour l'astuce
Free Unlock Tested Prophet Spv M600 Pm300 From Amena
HI...
It's simple and the process is free ...
Only thing you need is the program Lokiwiz03a and no more. . .
1. Copies Cert_SPCS.cab, EnableRapi.cab to spv
2. install in the spv; 1. Cert_SPCS.cab, 2. EnableRapi.cab in order. . .
3. running the LokiwizMsl.bat which give you the code which you enter with not accepted simcard. . . enjoy. . .
work on all version and all spl . . . tested on ipl 2.15.0001 spl 2.15.0001 g4 chip . . .
Big thanks Juliocesarmaster ! Worked 1000% !
Juliocesarmaster that worked a treat thanks