I'm having bad signal sometimes I lose it :( - MDA, XDA, 1010 Software Upgrading

I'm in the Middle East (Lebanon) , Band 900Mhz (Libancell).
I upgraded to WM2003 T-mobile cooked Rom vers 4.01.16 & RSU to 4.21.00 after the RSU upgrade I'm having weak signal sometimes I lose it,It's abviously not working fine, In your opinion what shall I use an RSU version to get a better signal thus this RSU is made for such countries and bands, I'm totaly confused and scared to make any move coz of the threads that I read I don't wanna lose my XDA.
Plz!!!! :roll: notify me I want to get rid of the signal loss, Thanks in advance.

same problem here
I have the same problem. Sometimes my MDA loses reception and searches for GSM signal - after soft reset it gets more than 70% signal strenght. I know that MDA is not the best phone on the world but those reception problems makes me think that's time to switch to normal PDA conencted with good cell phone. Additionally I have cheap GPRS but I have to pay a lot every time it connects to a network - with poor reception connection drops very often and i have to pay for reestablishing it...
BTW. I have same ROM and RS versions as above.
jarekt

I agree it's a risk to play with the RSU ... especially this R4.21
Anyway, if your device is PW10A then try the RSU 3.25 from carrier devices ... it's perfect for the Mid East area.
If your device is PW10B, then try the T6.25.02 which can work with 900 MHz ... I 'm using it in Egypt.
Again, be extreamly careful as R4.21 is not easily upgradable!! ... I wouldn't recommend EXE upgrade, instead, extract the 4 files from the exe and put them on the \windows\startup directory of your device.
Cross ur fingers and may God help

Only Hope!
Biso007 said:
I agree it's a risk to play with the RSU ... especially this R4.21
Anyway, if your device is PW10A then try the RSU 3.25 from carrier devices ... it's perfect for the Mid East area.
If your device is PW10B, then try the T6.25.02 which can work with 900 MHz ... I 'm using it in Egypt.
Again, be extreamly careful as R4.21 is not easily upgradable!! ... I wouldn't recommend EXE upgrade, instead, extract the 4 files from the exe and put them on the \windows\startup directory of your device.
Cross ur fingers and may God help
Click to expand...
Click to collapse
Thank you Bisso, My device is PW10A but since the T-mobile Rom installed I can see in the device information "PW10B". Well then , still the device hardware is PW10A , Good Luck to me :? , I'll tell ya what will happen with me..

Re: Only Hope!
ramram said:
Biso007 said:
I agree it's a risk to play with the RSU ... especially this R4.21
Anyway, if your device is PW10A then try the RSU 3.25 from carrier devices ... it's perfect for the Mid East area.
If your device is PW10B, then try the T6.25.02 which can work with 900 MHz ... I 'm using it in Egypt.
Again, be extreamly careful as R4.21 is not easily upgradable!! ... I wouldn't recommend EXE upgrade, instead, extract the 4 files from the exe and put them on the \windows\startup directory of your device.
Cross ur fingers and may God help
Click to expand...
Click to collapse
Thank you Bisso, My device is PW10A but since the T-mobile Rom installed I can see in the device information "PW10B". Well then , still the device hardware is PW10A , Good Luck to me :? , I'll tell ya what will happen with me..
Click to expand...
Click to collapse
Biso, I extracted the files they are not 4 files!. I found out in that cab file 7 files :S 0rilgsm1.005 , 000setup.999 , MONITO~1.002 , MONITO~1.003 , RSUPGR~1.000 , RSUPGR~1.001 , RSUPGR~1.004 .
and there's no .exe file :S what shall I do in this case ?!? I'm still lost . I think am going through the executable file but does this Qtek RSU work on the O2 XDA??

Re: Only Hope!
ramram said:
ramram said:
Biso007 said:
I agree it's a risk to play with the RSU ... especially this R4.21
Anyway, if your device is PW10A then try the RSU 3.25 from carrier devices ... it's perfect for the Mid East area.
If your device is PW10B, then try the T6.25.02 which can work with 900 MHz ... I 'm using it in Egypt.
Again, be extreamly careful as R4.21 is not easily upgradable!! ... I wouldn't recommend EXE upgrade, instead, extract the 4 files from the exe and put them on the \windows\startup directory of your device.
Cross ur fingers and may God help
Click to expand...
Click to collapse
Thank you Bisso, My device is PW10A but since the T-mobile Rom installed I can see in the device information "PW10B". Well then , still the device hardware is PW10A , Good Luck to me :? , I'll tell ya what will happen with me..
Click to expand...
Click to collapse
Biso, I extracted the files they are not 4 files!. I found out in that cab file 7 files :S 0rilgsm1.005 , 000setup.999 , MONITO~1.002 , MONITO~1.003 , RSUPGR~1.000 , RSUPGR~1.001 , RSUPGR~1.004 .
and there's no .exe file :S what shall I do in this case ?!? I'm still lost . I think am going through the executable file but does this Qtek RSU work on the O2 XDA??
Click to expand...
Click to collapse
Done installation success 100% "I used the executable file", now I'll get my eye on the signal for couple days till then I might revert back to the old RSU version surely not the R4.21, Thanks for your assistance.

thax
I worked for me as well. Exe upgrading without problems. Now let's observe if there is any diffrence

??!?
jarekt said:
I worked for me as well. Exe upgrading without problems. Now let's observe if there is any diffrence
Click to expand...
Click to collapse
I don't wanna disapoint you guys but I'm still having the weak signal thus I know from my previous cell that the strength signal stays on top all the time (I just tried another cell to make sure, still full signal ), so where's the problem here? Is it from the ROM WM2003 or from the RSU?
From where can I get the old RSU VER 3.16 for middle east region ,I just wanna know where we are going wrong :s, thanks in advance.

Re: ??!?
ramram said:
jarekt said:
I worked for me as well. Exe upgrading without problems. Now let's observe if there is any diffrence
Click to expand...
Click to collapse
I don't wanna disapoint you guys but I'm still having the weak signal thus I know from my previous cell that the strength signal stays on top all the time (I just tried another cell to make sure, still full signal ), so where's the problem here? Is it from the ROM WM2003 or from the RSU?
From where can I get the old RSU VER 3.16 for middle east region ,I just wanna know where we are going wrong :s, thanks in advance.
Click to expand...
Click to collapse
Remember weak signal but am not losing it , meaning it was a worth of updates ,good luck xda'res

Re: ??!?
ramram said:
ramram said:
jarekt said:
I worked for me as well. Exe upgrading without problems. Now let's observe if there is any diffrence
Click to expand...
Click to collapse
I don't wanna disapoint you guys but I'm still having the weak signal thus I know from my previous cell that the strength signal stays on top all the time (I just tried another cell to make sure, still full signal ), so where's the problem here? Is it from the ROM WM2003 or from the RSU?
From where can I get the old RSU VER 3.16 for middle east region ,I just wanna know where we are going wrong :s, thanks in advance.
Click to expand...
Click to collapse
Remember weak signal but am not losing it , meaning it was a worth of updates ,good luck xda'res
Click to expand...
Click to collapse
To whom it may concern, I reverted back to the Special Edition Rom and I noticed that the Signal stays on top all the time I guess it has to do something with the WM2003 Roms which is very sad of conclusion.

U need MY|PHONE by JGUI (freeware) it shows signal strenght in % on today screen.
http://forum.xda-developers.com/viewtopic.php?p=39979#39979
Maybe it will be easier to compare ROMs with this plugin.

jarekt said:
U need MY|PHONE by JGUI (freeware) it shows signal strenght in % on today screen.
http://forum.xda-developers.com/viewtopic.php?p=39979#39979
Maybe it will be easier to compare ROMs with this plugin.
Click to expand...
Click to collapse
I have been on using the Special edition rom for 3 days and till now I didnt lose the signal the strenght keeps ontop, conclusion it has something with the Rom , I don't know what would be the incompatibilty in that , I wish if there would be some Techs here to help us or tell us what's happening.. I'm sure if i'll revert back to the WM2003 I'll face the problem with weak signal and lose it

As the matter of fact we can ask official T-mobile or ATT support - there's something wrong with WM2003. I have nothing common with ATT naither T-mobile so I cannot do this...

Related

RSU upgrades for Qtek 1010

I have upgraded to PPC2003 v 4.00.01 ENG from FTP..lycos.uk...and am very happy with the speed of the Qtek that has greatly improved. I have radio V. 3.19.01 that did not change with the upgrade ..Is there a better version of the Radio Stack?
If so where is the link? I use Qtek 1010 in Oman. ME
Ravi Radh
Hi,
my advice to you if your Radio is working fine with the upgrade dont change it.
Generaly the 3.19.01 was a good Radio version for QTEK when i upgraded to 3.23 i had problems in Lebanon. If ure device is working fine keep it like that.
:wink:
Hi,
Thanks for the advice @ Arzleb. I think its better to keep it going this way as its difficult to have a stuck QTEK with an improper Radio in it.
Its just that this version of Radio I feel has a falling signal strength!! Could be the OMANTEL GSM network too!!
Its too early to evaluate as I got 3.19.01 ver just a week ago
Thanks
Ravi Radh
Well Ravi i tried every RSU possible on the QTEK in order to track the signal problem which i also have in Lebanon. Currently i am using the o2 4.21 and i can assure u its the same as 3.19 & 3.23.
I think sometimes the signal bars arent always right! i will give an exemple sometimes the bars shows 1 or 0 and i could still receive a call. Dont always trust the bars but also that doesnt mean that the Signal is good and i dont think its the device's fault. U could blame the operator 50% and the device 50%.
Now what is happening with me is that the bars change very fast on the same Cell i mean they drop to 1 then go up to 4 very fast like crazy lights and also in places were the signal on other phones are full on my QTEK is 1 or 2.
Anyways as long as no one is telling you that we are calling you and ure phone is closed i think ure safe.
Salam bro
:wink:
Hello,
does any one have an executable file with the 3.13 version?
Thx!

which rom version will suite the middle east

I have an sx56 originally working wiht AT&T. I flashed the rom with 4.05 and it works fine except for some system halts. Also the screen backlight sometimes goes off and never goes on again until I soft rest it.
I live in Egypt and use vodafone coverage. are there any updated roms to use. will the 4.11 4.16 or 4.21 work with me or not. formerly I was using ppc2002 and working fine, and now running 4.05 and still working but with minor problems, can I upgrade or what.
you havn't specified,but it looks like you are using Tmobile's radio stack and rom. I have tried several and came up with the best rom for egypt which is the Qtek RS and rom. if you need anything else contact me on 0122200666
Hi guys ... nice to see few egyptians here
I have a friend needs help. He got a SIM-locked T-mobile XDA with 32 MB RAM orginally loaded with ROM 3.14 and RSU 6.20 for T-mobile.
I managed to unlock his XDA and upgrade the ROM to 4.00.05 ENG. The problem is with the RSU ... I tried the O2 4.21 and Qtek 3.25 but still doesn't get Mobinil signal. I tried to change the band to 900/1800 and 900 only and still no signal (did not try Vodafone though).
Could there be any firm ware problem or I miss a minor actoin.
I would appreciate giving more details on your XDAs and the steps and ROM, RSU versions you used. My mobile is 012-3147866 or e-mail [email protected] ... thanks in advance.
Bye
aabarakat said:
I live in Egypt and use vodafone coverage. are there any updated roms to use. will the 4.11 4.16 or 4.21 work with me or not. formerly I was using ppc2002 and working fine, and now running 4.05 and still working but with minor problems, can I upgrade or what.
Click to expand...
Click to collapse
yes you can upgrade to 4.00.16 and your bug will disappear, however there will still be some annoying stuff as the WM2003 is still a pre-release..but the 4.00.16 doen't bug me like the 4.05.
[/b]bisooo....as for you, not sure if I have good news...but try it on vodafone and tell me what is going on....
aabaraket:
I live in Egypt and use vodafone coverage. are there any updated roms to use. will the 4.11 4.16 or 4.21 work with me or not. formerly I was using ppc2002 and working fine, and now running 4.05 and still working but with minor problems
Click to expand...
Click to collapse
Does that mean u actually get vodafone signal ?? ... what RSU version are you using plz
Samer: Thanks for the reply anyway ... actually the XDA dosn't sense any network coverage (manual network selection). So I believe I 'm using the wrong RSU or its firmware is locked for T-mobile. You wrote in your signature that you still have RSU 6.18 ... does that work in Egypt ?!
bisooo,
don't jump to conclusions...first of all let me assure you that most Tmobiles and SimensSX65 and QTeck and ALL XDAs work in Egypt. I have had a couple of them, bought a good number for a couple of friends....they are all working fine. ofcourse unlocked...
So lets start by some simply question first, before I go on with those questions one very important question though did you by any chance while in 'calender' bootloader mode i.e. GSM options ...did you press ANY THING OTHER THAN THE 900 or THE 900/1800 BUTTON??
this is very important....
now.. for the questions:
1. tell me how you unlocked the device...
2. where you bought it from...
3. is it an 'A' model or a 'B' model.
other questions will follow, just plug me in with the headlines firs!..
Dont worry..
Samer,
1st thanks again for your thoughtfulness ... happy to tell you that I finally managed to let it work ... I installed T-mobile RSU 6.24 and it got the signal. I just handed it to my friend 10 minutes ago and he was sooo glade
one last question plz and this is for MY device. I heard lots of complains about ROM 4.00.16 and 4.00.21 ... did you find any value for them over the 4.00.11 one (new features, bugs fixed, ... etc)
thanks again
bisooo,
not sure as I upgraded from 4.05 so I havn't had the chance,, my opinion is as long as it's a prerelease we might as well wait a while and get something more dependable than what is in our hands...but from reviews around i think that the 4.11 is ok...
just curious, how did you unlocke your friends device? any method other than the manipulator?
Also, have you tried to put together a local car kit for the set... I am thinking of making one locally and wanting some advice on the topic..
take care...
Samer,
For unlocking, I upgraded the XDA first to ROM 3.17 from the kitchen ... when it starts, it asks u if you want to unlock then you say yes ... for my device as it had ROM 3.18 I copied the XDAunlock.exe to the device and ran from there.
For the car kit, I believe I saw a topic here talked about converting a cradle to a car kit ... it has all details with pics too!!. Search under the accessories forum.
Good luck ...
hi biso007,
hope I am not disturbing you...but finding someone from Egypt who knows about the device is good...
anyway ..I remeber you upgraded your friend's radio stack to 6.24 ! and rom 4.00.21 . Is he encountering any problems with SMS...I am having the weiredest bug ever with my upgraded rom. I receive SMS but can't send them. when changing the sim card to vodafone isntead..everything works perfect. tried all the tricks of sending from different places and excluding the international code from the message service number....etc. nothing is working..
I would like also to know if you have faced any problems while working around with installing different Radio versions for your friend's device?? did you encounter any difficulty there??
thanks a million, :?
Hello there;
I am very sorry not to reply to you earlier, but I had to travel immediately after my post and could not find the time there to get to the forum and see the replies.
I am very happy to hear from you, and to share each other's experiences about this great device.
I am still running the 4.05, still have the problems but I can live with it. I was considering to upgrade to .16 or 21, but decided to wait till we have a real release not a prerelease versions.
I am running radio version A.20.10, I use vodafone, and I had absolutely no problems with sms. I do not have experience with mobinil in this subject.
By the way I downloaded a midi player and tried to use midi files as ring tones to save ram space, but the sound is very poor. Does anybody know how to improve the sound of midi tones on the xda.
waiting for your replies............
By the way I downloaded a midi player and tried to use midi files as ring tones to save ram space, but the sound is very poor. Does anybody know how to improve the sound of midi tones on the xda
Click to expand...
Click to collapse
Up to my information, the XDA MIDI player is not capable to play MIDI files that use more than 4 insturments. So, either to get tones in this specs, or if you have the knowledge you can use any MIDI editor and disable some tracks.
Good luck and Welcome back
XDA MIDI player is not capable to play MIDI files that use more than 4 insturments. So, either to get tones in this specs, or if you have the knowledge you can use any MIDI editor and disable some tracks.
Click to expand...
Click to collapse
I wonder how a smart phone running symbian or other operating systems with a total memeory of 4 MB, can play polyphonic and midi tones perfectly and the xda cannot ??
I used a midi editor to reduce the number of tracks, and even used a single track midis and the result is still poor. anymore ideas !!!
radio for qtek working with egypt
have u find radio version works fine with egypt ? please help
i am working on radio 3.23 but signal is weak and when iam in low coverage signal lost and its does come back until i turn off and on network again

Which Radio Stack works best on T-Mobile USA in Florida?

I have the T-Mobile PPC and I have upgraded it to the T-Mo WM2003 ROM. I like this ROM due in large part to the windows voice command. Anyways it says under my system settings that my radio is 6.02. I am not getting very good reception, not just on the screen but I'm missing calls and dropping calls as well. Someone else on the forums said to try to find someone in my area whos using a good RS. So does anyone have any help from my area? Or just in general what's worked best for people? I know some are using ATT upgrade as well. Please let me know, thanks.
Go to < http://www.yorch.net/upgrades.htm > He has the latest T-Mobile RSU.
I has the same problem with T-Mobile. My answer was to switch to AT&T.
Good Luck,
Carey
The newest radio stack on yorch.net is unofficial. Is anyone using this unofficial radio stack?
Hey everyone, I had to finally switch to a different phone because I was just dropping calls everywhere. But recently spoke to someone and they advised using a new RSU. Can anyone tell me what RS they seem to get the best service on?
I have been using the Radio Stack version 6.25.02 along with the ROM version 4.00.21 ENG. The combination works best for me on my SX56 with the T-Mobile USA service.
The combination works best for me on my SX56 with the T-Mobile USA service.
Click to expand...
Click to collapse
I've been using SX56 too but I live in Asia with diffrent phone service. My ROM v3.17.03 ENG and Radio vA.20.10 and the reception is also weak. Is that combo also can work best in here? I also want to know is it true that using particular RS in diffrent area/service also have diffrent performance, or it is just a same everywhere with any services? Can anyone explained to me? Thanks.
I tracked down RSU 6.25.02 but when I tried to do the upgrade it wouldn't work. I tried a couple different ones actually. I took the 4 files and placed them in the Windows\Startup folder. Then reset with no luck. Then I put the 4 files in the Windows folder and just the exe in the Startup. But still no luck. So finally I tried a different upgrade and that one just put it in perpetual reset mode, so I left my XDA on over night to delete everything and now it seems to be working ok. Can anyone tell me what I'm doing wrong with the upgrade?
This is what I did to upgrade the Radiostack:
1. Copied all the 4 files of Radiostack to device's \windows directory through ActiveSync.
2. Execute RSUpgrade.Exe by double-clicking it.
3. Soft-reset the device once the Radiostack is done.
Your result may vary. Please try it with caution.
thanks pvenkat, I upgraded following your directions and it worked. Unfortunately I think the reception is even worse now than with 6.18!! I'm pretty much just accepting that the XDA on Tmobile (at least in florida) is just garbage reception. But since this is not my first phone and I can pretty much afford to play with it, can anyone else recommend a RSU I could use? I'll try ATT, Rogers, whatever. Just what does everyone find giving them best reception? TIA

Horrible Reception

i've been using my jam for about 4 months now and i had horrible reception with it since i brought it to America, when i used in Saudi Arabia i never had a reception issue. Well for the last week and couple days i've been using this extremely old nokia 3590 and i get full reception with it, specially in my house where i would usually have no reception with the jam. my jam i forgot if my jam is the 850 or 900mhz jam. i know cingular runs on 1900mhz and another i think 850mhz. Well does anyone have issues with reception on a "foriegn" network? and know of a solution?
What Rom Ver are you running there and what is the radio stack ver , sometimes it helps to change the radio stack . . . upgrading it or downgrading it . There's quite a few posts regarding radio updates.
Cheers
horriable reception!!
I used mine in india whilst trekking no probs. I regularly travel all over the world and have had no issues wit phone use. Except takes alittle while to log in to a network.
isnt there a version which is 900 1800 800 /1900 mhz for the US ?
Im sure I read it some where.
maybe your not picking up all the transmitters.
i'm on Rom version 1.12.00 WWE Radio Version 1.13.00 protocol 1337.43 and ExtRom 1.12.167
Mine is the 850/1800/1900 and i think cingular runs on 900 aswell as 1900, also the old at&t network which is now cingular is 850 so why am i not getting good reception? i was reading theres a bigstorage rom where you can select the mhz frequency you want the antenna to run on.. anyone know if that would be a fix?
fone_fanatic said:
i'm on Rom version 1.12.00 WWE Radio Version 1.13.00 protocol 1337.43 and ExtRom 1.12.167
Mine is the 850/1800/1900 and i think cingular runs on 900 aswell as 1900, also the old at&t network which is now cingular is 850 so why am i not getting good reception? i was reading theres a bigstorage rom where you can select the mhz frequency you want the antenna to run on.. anyone know if that would be a fix?
Click to expand...
Click to collapse
I don't think it is the hardware. I'm using an XDA Mini, which is the European version. It is loaded with the Imate softare off of this site, and I pick up Cingular towers (though my service is through T-Mobile). You might try updating your ROM.
I am in the LA area.
ROM 1.13.00 WWE
Radio 1.12.10 1337.42
ExtRom 1.12.188 WWE (But I have modified to BigStore)
you can download the radio freq select cab file on its own , do a search on the forum for something to that effect as its somewhere.
then you can manual select them.
thanks for the updated info. Steve, thanks for the info, knowing your using a "foriegn" magician in the us helps me a little. right now i'm downloading the latest WWE rom from the FTP site, i think its 11200_188_11210. if thats not the lastest, please advise me so i can get the latest rom.
also steve your on 1.13.00 because your using the bigstorage correct?
FrankenMini!
fone_fanatic said:
thanks for the updated info. Steve, thanks for the info, knowing your using a "foriegn" magician in the us helps me a little. right now i'm downloading the latest WWE rom from the FTP site, i think its 11200_188_11210. if thats not the lastest, please advise me so i can get the latest rom.
also steve your on 1.13.00 because your using the bigstorage correct?
Click to expand...
Click to collapse
Well, it is a long story. I went to the UK site and downloaded their upgrade program. Then I backed up my ROM, and used the NOID program to update the UK ROM. The actual EXE file at the UK site won't work unless the device is actually from the UK, hence the "NoID" version of the updater has to be used. BTW, ActiveSync needs to be in normal mode (USB "checked") and the Magician has to be in Boot Loader mode when the NoID upgrader program is executed. The documentation was a bit inconclusive on these two points. The above combination worked on my unit.
At that point I had a latest UK version ROM, and it worked fine. But now I had the "upgrade bug", and wanted to customize everything. Taking a deep breath...
I discovered the addresses for the Extended storage and changed them to make that ROM a BigStorage ROM. There was already a UK version Big Storage available on the ftp site, but for some reason it would not complete the boot after flashing the ROM. Anyway, I ended up with the UK ROM modified for Big Storage, and decided to use the latest released IMATE Extended ROM utilities. Then I changed the boot screen and - there it is. OK, OK, so I do things the long way...
I tried the UK Ext ROM stuff also, but they have things that do not apply to the US T-Mobile, such as Blackberry push from their servers. So my unit is a hybrid...
Just call it FrankenMini!
The only co$t is for a 256 mb SD card to contain the ROM image as you transfer it to and from the PC. Actually, 128Mb would do, but the 256 was just about as cheap.
This page explains how to backup and update the Magician:
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
ampda has published an excellent PDF file on upgrading the magician:
http://forum.xda-developers.com/viewtopic.php?t=33305&highlight=storage+pdf
This is the site for the UK T-Mobile shipped ROM:
http://www.iris-global.com/t_mobile_download/download_manager_mda_com.html
This page explains how to update your bootup screen:
http://pocketpcdubai.infopop.cc/groupee/forums/a/tpc/f/582600994/m/138105069
This page discusses modifying the current ROM storage to create a Big Storage (not for the faint of heart!)
http://forum.xda-developers.com/viewtopic.php?t=23250&highlight=storage+explained
xda FTP site extended ROM directory:
ftp://xda-developers.com/Magician/Extended_Roms/
thanks for all this information, and sorry to have you go through all this, but i've just figured out a simple fix.... I'm going to trade in my jam for a k-jam, since its quad band and it runs on WM5.0 i think i'll be happier with it. although its a little thicker i think i'm gonna go ahead with the transition.
Thank you again for all your info, but does anyone know where i can get a picture of the jam next to the k-jam, i remember some site had pics of them together but i can't seem to find it now.
fone_fanatic said:
thanks for all this information, and sorry to have you go through all this, but i've just figured out a simple fix.... I'm going to trade in my jam for a k-jam, since its quad band and it runs on WM5.0 i think i'll be happier with it. although its a little thicker i think i'm gonna go ahead with the transition.
Thank you again for all your info, but does anyone know where i can get a picture of the jam next to the k-jam, i remember some site had pics of them together but i can't seem to find it now.
Click to expand...
Click to collapse
K-Jam is OK as well, but I would never use the keyboard and it is too thick for me. The JAM is just right.

Big problem SPV M3100

Hi im new so if break any rules sorry. I have SPV M3100 with blackdiamond on it, unlocked, but when i want make a call phone starting connecting and after 2 sec break connection. Also if someone call to me they can't. Please help me. Sorry for my language im Polish and my english writing skills are not very good
is that mean that i can't get any help and i may throw out my phone. please if anybody have idea. that is on my phone ROM version Black Dymon ROM Date 01/04/07, Radio version 1.41.00.10 Protocol version 32.74.7020.18H
No this doesn't mean you have to throw your phone out. You just have to be a little more patient.
The people who use this forum aren't all from the same timezone and don't all have the ability to read this from work so it may take a couple of days to get a response.
I haven't done what you have some unable to help. Just don't get despondant that have you haven't had a response yet.
I've heard mixed reports of the 1.41 radio - some good and some bad. I tried 1.41 but eventually went back to the 1.38 radio because it is the most stable in many of the countries I work in. I didn't use the 1.41 radio in Poland but did have problems with it in Czech republic which is why I downgraded.
There are reports of dropped calls for this radio in this thread http://forum.xda-developers.com/showthread.php?t=303378 so it may be a good idea for you to read through that.
Personally, I'd drop down to radio 1.38.00.10 - get it here http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms,
BUT before you change the radio, make sure you have Hard-SPL 2.10 http://forum.xda-developers.com/showthread.php?t=296722 because this will help you recover your phone if something goes wrong.
It's still the same my phone can't make a call always drop after few seconds, i change ratio on 1.38.00.10 and 1.38.00.01 latest UK because I'm in Scotland right now and still is the same, meaby there is a chane to clean everything and upload on my spv again, if yes please for a tip how to do thant, or any difrend idea? Please help me because i start losing my mind and i have latest hard SPL by the way.And alsow i have reception on my phone everything sims ok but i can't make a call.
Scotland
der_Tiger said:
It's still the same my phone can't make a call always drop after few seconds, i change ratio on 1.38.00.10 and 1.38.00.01 latest UK because I'm in Scotland right now and still is the same, meaby there is a chane to clean everything and upload on my spv again, if yes please for a tip how to do thant, or any difrend idea? Please help me because i start losing my mind and i have latest hard SPL by the way.And alsow i have reception on my phone everything sims ok but i can't make a call.
Click to expand...
Click to collapse
Hi der_tiger,,, I've been playing about with black Dymond and various Radios in Scotland with varing results.. IMHO generally all the 1.4# radio Roms had issues with missing calls dropping radio signals etc.. I've reverted back to 1.38.00.10 as it seams the most stable for us in jock-land.
Once you've reflashed your rom I would recommend you reflash black Dymond, I always get a more stable system by reflashing the System ROM "AFTER" i change the Radio rom.....not sure why.
Oh one other thing I noticed, this might just be an Orange thing, but If I manualy select the network ie in my case Orange rather than the phone Auto selecting networks I don't get any issues with signal drop-outs !!!! go figure !!
anyway hope this works for you too
Hi it's me again i have big favor to you mates. Can someone may send me on my e-mail [email protected] his own rom an configs from SPV M3100 with working in UK, please because i try everything and my phone still don't wand make a call.

Categories

Resources