I am having difficulty in picking up incoming calls from my XDA2. After I pressed call pickup button, it takes minimum 6 seconds to connect the call.
I want calls to be picked up instantly by pressing the pickup button.
Is there anyone else facing this problem in XDA2 or is there a solution for this?[/quote][/b]
I faced the same problem on my Qtek 1010!
I was losing calls because of it, but after I did a hard reset, everything went ok
Related
Hi,
Recently I have noticed a problem with my XDA II. When an incoming call comes in the phone does nothing. No ring or incoming call message on the screen. If I call my phone from my land line it rings and rings and never even goes to voice mail! If I press the answer button while doing this, the XDA2 suddenly starts ringing for a second and then it goes to voice mail. The phone then reports I have missed a call. If I then press the answer button to make a call, the phone goes haywire and plays the "missed a call" sound 3 or 4 times and then flashes the led. If I clear the missed call report and press the answer button again it does the same thing again.
If I soft reset the phone it is ok again, but eventually this problem comes back again.
It has only recently started doing this. The first time I noticed the problem was when I was setting up a photo contact for the first time. I have since retored an old sprite backup from what I believe was before the problem started but I am still seeing the same issue. I tried disabling IA_Callerid process on boot and a few other processes (down to 16 processes) but this hasn't helped either.
The main apps I have running are :
SPB Pocket Plus
GPRS Monitor
Wizbar Advance
XCPUscalar
Resco Keyboard
PIEplus
Has anyone else seen this problem before or know what could be causing it? Its totally weird. O2 support didn't have a clue either. I really don't want to have to hard reset my phone and install everything again :?
Many thanks,
Richard.
Do uninstall Wisbar, and possibly try their latest beta' release.
please help, i'm going mad!
when an incoming call comes in on my MDA Vario with QTEK rom and I press ignore (or the red hang up key), it does not hang up the call and divert through to voicemail......it just silences the ring tone.....but the incoming call keeps ringing until it finaly diverts through to voicemail (via the 25 seconds I have set in the call forwarding options)
I have tried the same thing with my SP5m and also my Universal and they all instantly divert the call to voicemail when hitting ignore or the red hang up key
is it a QTEK Rom issue or a Wizard issue????
I am on the QTEK rom as it seems the most stable........I tried the imate Rom but a real weird thing kept happening.......text messages were deleted after a soft reset......anyone know what caused that one?
cheers for any help
just tried it on my qtek and hangup and ignore both work... time for a hard reset?
yep... did that and now all ok....
I think it was something to do with a call filter program I had installed but didn't work.....must have altered the registry settings affecting hangups (the program alleged to filter and hang up automatically but I couldn't get it to work!)
it did also keep dropping the phone ring volume to zero as well but a soft reset after uninstall cured that one....
just thought it might have been the rom....glad it was more simple!
cheers
This now happens on my HTC Wizard (8125) and I've traced it down to an active GPRS connection. If I'm on GPRS pressing the soft key to ignore or pressing the hang up button silences the ringer but does not divert the call to voicemail. Once I disconnect the GPRS connection I can once again ignore calls using this feature.
Since directpush needs a constant GPRS connection, I am pretty upset that I have to sacrifice this functionality. Is there no solution?
All,
I have a MDA Vario 2 and experiencing the following problem. When the screen is switched off but the phone is on I am unable to switch the screen back on by pressing the on/off button on the side. I have tried to call myself from my landline but the phone does not ring even though I hear the ringing tone in my landline phone.
I then go on to leave a voice mail message and soft reset the mda phone but I get no notification to indicate a new message has been left.
Anyone else experiencing this? It is so highly annoying as the phone is on but not accepting any calls.
Thanks
Msuk
i have the same thing going on with my tytn.
really frustrating.
I have the same problem as well. Really frustrating.
i also have this problem. it is because of the software, installed on the TyTN, but i don't know which one
I've got a Universal with all the default ROMs and whatnot. I also use SPB PocketPlus and vBar.
Recently, since I got a bluetooth earpiece (Motorola HS820) - though not when the earpiece is turned on/connected - my phone has started rejecting calls when I try and answer.
I normally have my phone closed (screen not showing). Since some bug stopped me from being able to talk on it whilst it is closed, I have been opening it so the screen shows (and the keyboard doesn't) before I press answer. However, now this rejecting problem has arisen. I get a call, I open my phone so the screen shows and then press the answer button on the spine. This stops the ringing, but the incoming call popup stays as though I haven't answered, the person doesn't hear me and I don't hear them, then I get a missed call notification.
This does not happen 100% of the time. So far I have only noticed it when I've been receiving calls from my mother. However, she's pretty much the only person who rings me
Anyone got any ideas as to what is causing this/how I can fix it?
Update: I've done a hard reset and it seems the button still isn't answering the call. It isn't rejecting the call, it just isn't answering it.
This phone is proving to be more trouble than it's worth...
Hi All,
I am having this queer issue, my touch hd cuts off call after 15 seconds of it ringing and displays it as a missed cal whilst the call keeps ringing at the other end. That means, for me its a missed call before i can pick it where as the caller continues to hear the call ring at his end. Anybody faced this? I use Dutty 3.3 ROM. Any help will be great!
Thanks
Raz
nobody has got such an problem???
I don't know if this is the same issue you are experiencing but since earlier this evening I have been unable to make or receive calls. If somebody rings me the HD rings once and then goes back to the home screen. The caller hears the phone ring once and then it cuts off or they get a message saying there is a fault. If I try to call someone from the HD it rings once and cuts off. I have tried soft resetting the phone and also switching it off, removing the battery for a couple of minutes and trying again but I still have this problem.
Is this the same as you have been experiencing?