Anyone else have this problem with Ostia after upgrading their I-Mate:
Whenever I try to enable GPS (using my SD card GPS) it totally exits out of ostia - with no warning.
Related
Hello,
I have a Jasjar ROM 1.12.38 WWE.
It was working fine until now. When I don't use it for a few minutes and I open it, it shows up the new memory card inserted message. Everytime. Even if the card is there, I didn't remove it or touched the unit, I open it and the message is there. How can I make it stop? Does anyone knows?
Hi all,
Following problem:
- Qtek 2020 (or 2020i), combined with a SD-card , TomTom Navigator 5 and own software
1. Qtek 2020(i) works fine with SD, TomTom 5
2. Qtek 2020(i) works fine with SD, own software
3. Qtek 2020(i) works fine with SD, TomTom 5 and own software ONLY WHEN THE SD-card is slow (less then 40x)
We tested much different SD-card with different chipsets and only the real slow cardtypes work. The problem is that those cards aren't available anymore on the market, so we are looking for a solution to slow-down the SD I/O speed to the card.
How can this be done in Windows Mobile 2003 (se)??
Thanks for any solution or tricks to solve this problem!
Sam
I assume, the cause with the telephone.
Please once TT starts and uses the telephone. TT will freeze.
My alpine used to freeze when a call or text message was received whilst an SD card was inserted.
After upgrading the Radio rom from 1.00 to 1.04, this problem ceased. What version of radio ROM is on your alpine? If it is not 1.04 then this may help.
I use also the version 1.04
Hi to all i have this problem and i wanted to share with people hear thinking that maybe someone will be able to help me with his advice.I have an T-MOBILE MDA PRO withe q-teq rom and my problem is that when i insert a SD card its reading from the SD card but i cant write to it.because it was new i tried to format it withe FLASH FORMAT and its saying that its write protected but when i put it to my digital camera it is formating and writing and reading too so does anyone know what could be the problem?
ROM Ver. 1.30.77 WWE
RADIO Ver. 1.09.00
EXTRom Ver. 1.30.176 WWE
make sure the little switch on the side is in the up position
_______
|.............\
[| <-up....|
.|.............|
|..............|
|_______|
(contacts at top on reverse in diagram)
I did what you said but again nothing happens.The sd card is working normally in
my digital camera.Is it possible to be from the MDA PRO or a program thing?I was thinking to upgrade my rom.
Fixed the problem of the sd card i opened the mda there were two pins in the sd holder that weren't touching each other i touchet them and now its ok.
Hello,
I have a problem with my phone. When I try to enable bluetooth, the 'busy' animation keeps going, and after a few seconds my phone doesn't respond to anything. I have to perform a soft reset to get my phone responding.
I tried a lot of things to find out when this problem occurs, and i found out that my bluetooth works only when I remove the micro-sd card from the slot. Then, when my bluetooth is enabled and I put the micro-sd card back in, it just keeps working.
Does anyone know a solution for this problem, so I can enable bluetooth without having to remove my micro-sd card?
More information:
Phone: T-Mobile MDA Vario 2 (herm300)
Rom: WM6 Schap's 3.54b (dutch)
Radio: 1.50.00.00
Micro-sd card: 1gb SanDisk MicroSD (also tested with a kingston 1gb microsd, but with the same problem)
Installed programs (note: the problem also occured when no additional program's where installed):
Google Maps (phone memory)
WM VI Black Transcriber (phone memory)
Schap's Kaiser Comm Manager (phone memory)
Schap's Black Home (phone memory)
+ Program's included with schap's rom (unknown, not in uninstall-list)(phone memory)
If someone knows a solution for this problem, that would be great!
Thanx, and merry christmas, vosManz
Nobody familiair with this problem?
sorry dude can't say i've had that happen
Ok, but thnx for the reply
Trying to fix the problem, I re-installed schap's 3.54b dutch rom. That didn't solve the problem, so it's not a problem with one of the program's, because it's a clean install.
Then, I instaled schap's 4.22 full.. and.. it works now I can use my bluetooth again without having to release my micro-sd card A very nice ROM.. hope it come's in dutch too, but english is nice too..
However, it's was a strange problem. Can it be a problem in the ROM? Or only in the dutch version maybe?
my SD card keeps disapearing from my windows explorer and i have to take it out and reinsert it to make it work again. Anyone with wm6 on BA having the same problem?
I think this is hardware problem: dirty connection on card or in the device. I had similar problem with one card.
Can be also card problem.
Could it also be related to the rom? I have this same problem after my last flashing and I think I hve read about others experiencing this after reflashing to a particular rom.
I had this problem with WM2003 but after upgrading to WM6, I never faced this issue.
sad to say i have the same issue till finally it cannot show any cards at all.
i sent the device to several people even outside country and they confirmed it's an IC failure and has to be replaced.
i still did not do it...
I am currently using pdaviet rom. I didnt try another one to check if its a rom related problem. had an alpine before and noticed this problem also but it rarelly happened then.
My brother said that he had this problem too, but he solved it. It was since he installed a software called 'Storage Tools'. Did you do the same with your handheld?
My brother solved this just by uninstalling the software.
Okay, i hope this'd be useful.
I experienced this numerous times while using the original WM2003SE, but since upgrading to WM6 I have not had it once. The only thing I had (one time) was my card being seen as Storage Card2 and I also showed a Storage Card folder but it was not my card. I deleted it and reinserted the card and soft reset and all went back to normal.
This may also have to do with the sd card going to sleep and not waking up in which case it is software related and not hardware. Maybe setting the card not to go to sleep will solve the problem though with battery draining faster. Anyone know the setting or registry edit for this?
Upgrading to wm6.1
Try upgrading to ROM6.1, I had mine constantly missing too when I flashed to wm6. Now the problem settled. I am using PDAViet wm6.1, very stable.
This trouble was on my IPAQ rx1950 (it was before BA). Try to format\defrag your card, better in FAT (<2gb).
I have this problem in WM6, upgrade to WM6.1 solved it.
go and buy now you n000000bss
yes upgrading to wm6.1 solved this problem also.
mechanical problem
I have trouble with taking out the SD-card of the slot. Does anybody have an idea how to solve this problem ?
try dissasembling it... i know there's a post here with a link to the pictures on the steps how to do it.
then you can see how your SD got stuck.