Related
How can i make a backup of my Qtek S100 registry?
Micky_dk
Denmark
For Kilmist Registry Editor:
Load it up, click "Registry" on the menu, choose export registry file, and just give it a name. Let it whir and it'll be done, saved in your \my documents\ folder.
V
Thanx
How can I edit the file on my PC?
Micky_dk
Denmark
Same question was asked elsewhere and I got told off
Drag it into notepad!
V
Micky_dk said:
Thanx
How can I edit the file on my PC?
Micky_dk
Denmark
Click to expand...
Click to collapse
PHM Regedit is freeware, and can edit, backup, and restore the file - on the PPC itself (store the backup to an SD card).
Off topic:
stevedebi: I love the PHM stuff, but as far as I can remember, it doesn't permit importing of branches of a registry, just the lot, doesn't it?
Also, it exports into the old .rbk format of registry, which is not easy to edit.
But maybe I've got an old version.
V
vijay555 said:
Off topic:
stevedebi: I love the PHM stuff, but as far as I can remember, it doesn't permit importing of branches of a registry, just the lot, doesn't it?
Also, it exports into the old .rbk format of registry, which is not easy to edit.
But maybe I've got an old version.
V
Click to expand...
Click to collapse
No, I think you are correct in both cases. But you can't beat the price.
Since I don't know how to edit the Wiki pages and I didn't find the information elsewhere I would like to share the solution for revealing the hidden partition of Atom Life here:
Using a registry editor go to
HKLM\System\StorageManager\Profiles\Trueffs_DOC1\FATFS\
now open "MountHidden" and set the the decimal value to "0"
After a softreset there will appear "_QHiddenPartition" as a storage card in the file explorer.
Enjoy!
tuttovabene said:
Since I don't know how to edit the Wiki pages and I didn't find the information elsewhere I would like to share the solution for revealing the hidden partition of Atom Life here:
Using a registry editor go to
HKLM\System\StorageManager\Profiles\Trueffs_DOC1\FATFS\
now open "MountHidden" and set the the decimal value to "0"
After a softreset there will appear "_QHiddenPartition" as a storage card in the file explorer.
Enjoy!
Click to expand...
Click to collapse
What to do with it, can we store files?
observer365 said:
What to do with it, can we store files?
Click to expand...
Click to collapse
It's simply because I like to know what's going on in my machine. In addition you have instant access to desired files you wish to extract for later use or on other machines. I also heard that it shall be possible to store cabs here which you wish to be installed via the O2 Autoinstall routine after a hardreset. But I also heard that it could be dangerous to manipulate the files in the hidden partition(?)
Does anyone have detailed and reliable information about that?
Regards!
Hi
Wonder if anyone can give me the 2 registrykeys i need to create the blockrecognizer and the other one that i cant remeber the name on
I have a swedish version and for some strange reason they have disabled the 2 inputmethods in it.
Thanks
/Magnus
Sebulba_se said:
Hi
Wonder if anyone can give me the 2 registrykeys i need to create the blockrecognizer and the other one that i cant remeber the name on
I have a swedish version and for some strange reason they have disabled the 2 inputmethods in it.
Thanks
/Magnus
Click to expand...
Click to collapse
It seems that you have always the same problem....see your post there:
http://forum.xda-developers.com/showthread.php?t=303954
good luck!
ouioui01 said:
It seems that you have always the same problem....see your post there:
http://forum.xda-developers.com/showthread.php?t=303954
good luck!
Click to expand...
Click to collapse
Ps: i remember that someone post something to disable input keyboard for TC, maybe in Tweak and tricks thread...sorry, haven't got enough time to search.
Yes i always get this problem when i buy a new phone.
So i know how to fix it i just need the registry key to enable the input type again.
So if anyone with the 2 recognizer inputs enabled could search the registry and give me the keys?
Thanks
/Magnus
Can't remember where I saw it but when I disabled my keypad I changed some stuff at
HKEY_CLASSES_ROOT\CLSID\{198D503A-EFFE-4afd-BC54-EED333C80E6D}
Good luck!
Thanks
This was wrong key it is the key for the Touch-keypad.
But i finally found a cab that will fix the block and letter recognizer for both Touch and Touch Cruise, and i should probably say its for the swedish version.
If you want to use another country edit the textfiles i have attached.
You should change the name of the dll file on line 10 and 18. I guess yours will be namned with your country code instead of the sw that stands for sweden.
Think you will find the msim??.dll in you windows folder.
/Magnus
Sebulba_se said:
This was wrong key it is the key for the Touch-keypad.
But i finally found a cab that will fix the block and letter recognizer for both Touch and Touch Cruise, and i should probably say its for the swedish version.
If you want to use another country edit the textfiles i have attached.
You should change the name of the dll file on line 10 and 18. I guess yours will be namned with your country code instead of the sw that stands for sweden.
Think you will find the msim??.dll in you windows folder.
/Magnus
Click to expand...
Click to collapse
Downloaded your files and renamed them to *.cab but couldn't get it to work! Any idea what I've might be doing wrong?
/Göran
Yes i know whats wrong...
The problem is that its not .cab files it is registry keys.
So you should rename them to .reg and execute them.
Then you should get a question if you want to add the key to your registry.
If thats not happening thats because you need some registry editor installed on your phone.
I use resco explorer witch is good for a loot of other things to.
Good luck
/Magnus
I went to http://www.smartmobile.se/ and got the cab file from Touch. Now the recognizer works for me - quick and painless
Sebulba_se said:
The problem is that its not .cab files it is registry keys.
So you should rename them to .reg and execute them.
Then you should get a question if you want to add the key to your registry.
If thats not happening thats because you need some registry editor installed on your phone.
I use resco explorer witch is good for a loot of other things to.
Good luck
/Magnus
Click to expand...
Click to collapse
Thanks,
Figured that out a little bit later and used resco explorer also, works nicely now
/GHurun
These 2 apps are very usefull (at least for me lol) but they miss a simply import/export to file like in the old AdvancedConfig and this should be very usefull for chefs.
So my questions are:
Somebody know an app that take note of every registry change?
Somebody know which are the registry keys that these 2 app gonna change?
An alternative app that has an Import/Export feature?
Thanks.
Look up Kheb 1.1.
i use Resco...
Thanks Ted,
this is what i was searching for.
Farmer Ted said:
Look up Kheb 1.1.
Click to expand...
Click to collapse
Thanks Kurniawan,
Even...Resco?? Registry Editor?
kurniawan77 said:
i use Resco...
Click to expand...
Click to collapse
I too would like to make the setting for Auto Data disconnect Automatic. But there is no reg entries to preset for this in the Cooking package. If you find these reg values let me know.
I will try this program listed by Farmer Ted
af974 said:
Thanks Kurniawan,
Even...Resco?? Registry Editor?
Click to expand...
Click to collapse
yep... resco registry editor... but its not like kheb that can take snapshots... but it does import export regfiles....
The problem I see is that Touch Tools only has 2 registry entries under HKCU software Touch Tools. Confirm on exit and Hepatic Feebback.
When I make changes in the program where do these settings get stored?
Do two snapshots, the second with a diff, then make an oem from the diff. Look on your sd card for the kheb/diff folder, and the oem will be there.
I have a morscript to toggle data connxn's; it does the same thing as Nodata.
RegWriteDWord("HKLM","\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\wap.voicestream.com","enabled",0)
bobsbbq said:
I too would like to make the setting for Auto Data disconnect Automatic. But there is no reg entries to preset for this in the Cooking package. If you find these reg values let me know.
I will try this program listed by Farmer Ted
Click to expand...
Click to collapse
i really would like to know this one too.
i found it some time ago on mobile underground, but i lost it on my computer...
Ok for those interested I found out how to set the Touch Tools Setting to have the data connection Auto Off . Just add this to your Gaz Touch tools or Tweak reg file.
Code:
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings]
"VPNCacheTime"=dword:00000005
"CacheTime"=dword:00000005
"SuspendResume"=hex(7):\
47,50,52,53,5F,62,79,65,5F,69,66,5F,64,65,76,69,63,65,5F,6F,66,66,00,00,\
00
"EnableCrPreprocessing"=dword:00000001
"CRPreprocessingTimeout"=dword:00003A98
"CoeffCost"=dword:00010000
"CoeffLatency"=dword:00010000
"CoeffBandwidth"=dword:00010000
"RetryCount"=dword:00000001
This tool works great,its a must for every chef IMO....though im facing a little problem:
Every putted reg key works fine but it seems that i cant get my modded CHT Home ....do i need something else in addiction to the reg keys?
Should i use a Mortscript to run my CHT backup after the 1st boot?
af974 said:
This tool works great,its a must for every chef IMO....though im facing a little problem:
Every putted reg key works fine but it seems that i cant get my modded CHT Home ....do i need something else in addiction to the reg keys?
Should i use a Mortscript to run my CHT backup after the 1st boot?
Click to expand...
Click to collapse
I use CeReg and after I have my CHT setup the way I want I just export the reg keys then I copy and paste this data in to the original CHT reg file. works for me
af974 said:
This tool works great,its a must for every chef IMO....though im facing a little problem:
Every putted reg key works fine but it seems that i cant get my modded CHT Home ....do i need something else in addiction to the reg keys?
Should i use a Mortscript to run my CHT backup after the 1st boot?
Click to expand...
Click to collapse
Here's an example for you:
HTML:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Co0kie\HomeLevel3]
"NotifyIcons.posY"=dword:000000C9
"NotifyIcons.visible"=dword:00000001
"Tasks.visible"=dword:00000000
"Tasks.posY"=dword:0000010E
"MusicPlayer.posY"=dword:0000001D
"MusicPlayer.layout"=dword:00000000
"MusicPlayer.visible"=dword:00000001
"zLayout.NotFirstRun"=dword:00000001
"MusicPlayer.scale"=dword:000003E8
"MusicPlayer.listSize"=dword:00000001
"MusicPlayer.posX"=dword:00000000
"TextClock.scale"=dword:000003E8
"TextClock.listSize"=dword:00000001
"TextClock.posX"=dword:00000000
"TextClock.posY"=dword:00000000
"TextClock.layout"=dword:00000000
"TextClock.visible"=dword:00000001
"NotifyIcons.scale"=dword:000003E8
"NotifyIcons.listSize"=dword:00000001
"NotifyIcons.posX"=dword:00000000
"NotifyIcons.layout"=dword:00000000
"QuickLinks.scale"=dword:000003E8
"QuickLinks.listSize"=dword:00000001
"QuickLinks.posX"=dword:00000000
"QuickLinks.posY"=dword:00000000
"QuickLinks.layout"=dword:00000000
"QuickLinks.visible"=dword:00000000
"Tasks.scale"=dword:000003E8
"Tasks.listSize"=dword:00000001
"Tasks.posX"=dword:00000000
"Tasks.layout"=dword:00000000
"Appointments.scale"=dword:000003E8
"Appointments.listSize"=dword:00000001
"Appointments.posX"=dword:00000000
"Appointments.posY"=dword:00000000
"Appointments.layout"=dword:00000000
"Appointments.visible"=dword:00000000
"Clock.scale"=dword:000003E8
"Clock.listSize"=dword:00000001
"Clock.posX"=dword:00000000
"Clock.posY"=dword:00000000
"Clock.layout"=dword:00000000
"Clock.visible"=dword:00000000
"BackHitbox.scale"=dword:000003E8
"BackHitbox.listSize"=dword:00000001
"BackHitbox.posX"=dword:00000000
"BackHitbox.posY"=dword:00000000
"BackHitbox.layout"=dword:00000000
"BackHitbox.visible"=dword:00000001
@=""
"zLayout.NotFirstRun"=dword:00000001 is very important if you want to import your own reg keys. If it is set to 0 then everything will just be set to the default CHT layout. Good luck (^^,)
bobsbbq said:
Ok for those interested I found out how to set the Touch Tools Setting to have the data connection Auto Off . Just add this to your Gaz Touch tools or Tweak reg file.
Code:
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings]
"VPNCacheTime"=dword:00000005
"CacheTime"=dword:00000005
"SuspendResume"=hex(7):\
47,50,52,53,5F,62,79,65,5F,69,66,5F,64,65,76,69,63,65,5F,6F,66,66,00,00,\
00
"EnableCrPreprocessing"=dword:00000001
"CRPreprocessingTimeout"=dword:00003A98
"CoeffCost"=dword:00010000
"CoeffLatency"=dword:00010000
"CoeffBandwidth"=dword:00010000
"RetryCount"=dword:00000001
Click to expand...
Click to collapse
great! thanks
steph
Thanks,
i used the tool posted here to took the difference after imported CHT backup and then putted them in a reg file but it seems to doesnt works.
Now im using TotalCommander for exporting the whole HTC Manila reg ,should it work now.
bobsbbq said:
I use CeReg and after I have my CHT setup the way I want I just export the reg keys then I copy and paste this data in to the original CHT reg file. works for me
Click to expand...
Click to collapse
Thanks seeM_ZA,
also for the "zLayout.NotFirstRun", didnt know that.
seeM_ZA said:
Here's an example for you:
HTML:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Co0kie\HomeLevel3]
"NotifyIcons.posY"=dword:000000C9
"NotifyIcons.visible"=dword:00000001
"Tasks.visible"=dword:00000000
"Tasks.posY"=dword:0000010E
"MusicPlayer.posY"=dword:0000001D
"MusicPlayer.layout"=dword:00000000
"MusicPlayer.visible"=dword:00000001
"zLayout.NotFirstRun"=dword:00000001
"MusicPlayer.scale"=dword:000003E8
"MusicPlayer.listSize"=dword:00000001
"MusicPlayer.posX"=dword:00000000
"TextClock.scale"=dword:000003E8
"TextClock.listSize"=dword:00000001
"TextClock.posX"=dword:00000000
"TextClock.posY"=dword:00000000
"TextClock.layout"=dword:00000000
"TextClock.visible"=dword:00000001
"NotifyIcons.scale"=dword:000003E8
"NotifyIcons.listSize"=dword:00000001
"NotifyIcons.posX"=dword:00000000
"NotifyIcons.layout"=dword:00000000
"QuickLinks.scale"=dword:000003E8
"QuickLinks.listSize"=dword:00000001
"QuickLinks.posX"=dword:00000000
"QuickLinks.posY"=dword:00000000
"QuickLinks.layout"=dword:00000000
"QuickLinks.visible"=dword:00000000
"Tasks.scale"=dword:000003E8
"Tasks.listSize"=dword:00000001
"Tasks.posX"=dword:00000000
"Tasks.layout"=dword:00000000
"Appointments.scale"=dword:000003E8
"Appointments.listSize"=dword:00000001
"Appointments.posX"=dword:00000000
"Appointments.posY"=dword:00000000
"Appointments.layout"=dword:00000000
"Appointments.visible"=dword:00000000
"Clock.scale"=dword:000003E8
"Clock.listSize"=dword:00000001
"Clock.posX"=dword:00000000
"Clock.posY"=dword:00000000
"Clock.layout"=dword:00000000
"Clock.visible"=dword:00000000
"BackHitbox.scale"=dword:000003E8
"BackHitbox.listSize"=dword:00000001
"BackHitbox.posX"=dword:00000000
"BackHitbox.posY"=dword:00000000
"BackHitbox.layout"=dword:00000000
"BackHitbox.visible"=dword:00000001
@=""
"zLayout.NotFirstRun"=dword:00000001 is very important if you want to import your own reg keys. If it is set to 0 then everything will just be set to the default CHT layout. Good luck (^^,)
Click to expand...
Click to collapse
I have synced my contacts with gmail and facebook and i have following problem :
For example, John, with number 063123456 is in my people... 063 is for operator and 123456 is number.. If he is saved in that format, when he calls me , phone will display John, but if he sends me a sms, phone will display +38163123456 (+381 area code for Serbia). If i save John in +38163123456 format, phone will display "John" in sms, but when he calls me, phone will display 063123456..
Help please
Thanks in advance
I have the same problem. It's really annoying and I hate it. But for now I just added both numbers to my frequent contacts. If someone could help us, that would be great!
+1 this is really annoying!
So no one found any solution ?
Try Settings > Phone > International assist and turn it on or off.
Not sure if this helps since i don't have this problemen, but you could try?
Discription says:
Turning on this feature will help automatically correct some common mistakes while dialing internationally or dialing while abroad.
Click to expand...
Click to collapse
So might do something with the country number!
The Following registry Tweak fixes the issue!
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:7
Thanks to xboxmod who provided the solution is this thread:
http://forum.xda-developers.com/showthread.php?t=907971
petrosk73 said:
The Following registry Tweak fixes the issue!
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:7
Thanks to xboxmod who provided the solution is this thread:
http://forum.xda-developers.com/showthread.php?t=907971
Click to expand...
Click to collapse
hey i've tried to access HKEY_CURRENT_USER\ControlPanel\Phone using registry viewer but an error message pops up saying access denied. Anyway to solve this??
BsB|oVeR said:
hey i've tried to access HKEY_CURRENT_USER\ControlPanel\Phone using registry viewer but an error message pops up saying access denied. Anyway to solve this??
Click to expand...
Click to collapse
Try using the method described here:
http://forum.xda-developers.com/showthread.php?t=907169
Works perfectly!
Thank you petrosk73. I haven't tried it yet but I hope it works!
Thank you again! Saved my WP7
4-Put this file into the attached xap provxmldeployer.xap with winrar.
Click to expand...
Click to collapse
just put it in archive or what ?
Well it doesn't work for me. Or I just don't know how to do it.
I first tried to manualy add the regestry tweaks with Regestry Editor with no luck.
Then I tried the ProvXml methode. -> Opened the NotePad -> Coppied the code:
Code:
REGEDIT4
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:7
-> Renamed the file to CustClear.reg and added it to the rar file provxml deployer.rar -> opened the xap program.
What did I do wrong?
EDIT: Well you have to open the xap program with winrar so that you can see the files that are inside it. You must replace the CustClear.provxml file with the new one and save it. Then run the xap program to you WP7. Now it works. Thanks again for the tip
you need to put those 2 files together (custclear created file and provxmldeplyoer.xap) with XBMOD.Files.Deployer.exe. but it force close for me ...
Laynee1 said:
you need to put those 2 files together (custclear created file and provxmldeplyoer.xap) with XBMOD.Files.Deployer.exe. but it force close for me ...
Click to expand...
Click to collapse
Just open the provxmldeplyoer.xap with WinRar on 7-zip and drag the custclear file in it, than save it. It worked for me