.net filesystemwatcher - Windows Mobile Development and Hacking General

.net filesystemwatcher - Windows Mobile Development and Hacking General

Im using the project from OpenNETCF.org to check when a new image is created in \\My Documents\\My Pictures by the camera. I have the following code (add a listBox and button to your form)
namespace OpenNETCFApplication1
{
using System;
using System.Drawing;
using System.Collections;
using System.Windows.Forms;
using System.Data;
using OpenNETCF;
using OpenNETCF.Drawing;
using OpenNETCF.Windows.Forms;
using OpenNETCF.IO;
/// <summary>
/// Summary description for Form1.
/// </summary>
public class Form1 : System.Windows.Forms.Form
{
private System.Windows.Forms.Button button1;
private System.Windows.Forms.ListBox listBox1;
private System.Windows.Forms.MainMenu mainMenu1;
public Form1()
{
//
// Required for Windows Form Designer support
//
InitializeComponent();
//
// TODO: Add any constructor code after InitializeComponent call
//
}
/// <summary>
/// Clean up any resources being used.
/// </summary>
protected override void Dispose( bool disposing )
{
base.Dispose( disposing );
}
#region Windows Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
{
this.mainMenu1 = new System.Windows.Forms.MainMenu();
this.button1 = new System.Windows.Forms.Button();
this.listBox1 = new System.Windows.Forms.ListBox();
//
// button1
//
this.button1.Location = new System.Drawing.Point(88, 32);
this.button1.Text = "button1";
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// listBox1
//
this.listBox1.Location = new System.Drawing.Point(72, 88);
this.listBox1.Size = new System.Drawing.Size(100, 93);
//
// Form1
//
this.Controls.Add(this.listBox1);
this.Controls.Add(this.button1);
this.Menu = this.mainMenu1;
this.Text = "Form1";
}
#endregion
/// <summary>
/// The main entry point for the application.
/// </summary>
static void Main()
{
ApplicationEx.Run(new Form1());
}
FileSystemWatcher myWatcher = new FileSystemWatcher("\\My Documents\\My Pictures");
private void button1_Click(object sender, System.EventArgs e)
{
myWatcher.Filter = "*.jpg";
myWatcher.Created+=new FileSystemEventHandler(myWatcher_Created);
myWatcher.Changed+=new FileSystemEventHandler(myWatcher_Changed);
myWatcher.Deleted+=new FileSystemEventHandler(myWatcher_Deleted);
myWatcher.Renamed+=new RenamedEventHandler(myWatcher_Renamed);
myWatcher.EnableRaisingEvents = true;
}
private void myWatcher_Created(object sender, FileSystemEventArgs e)
{
listBox1.Items.Add(String.Format("File system event: File {0} {1}",
e.FullPath, e.ChangeType));
}
private void myWatcher_Changed(object sender, FileSystemEventArgs e)
{
/* listBox1.Items.Add(String.Format("File system event: File {0} {1}",
e.FullPath, e.ChangeType)); */
}
private void myWatcher_Deleted(object sender, FileSystemEventArgs e)
{
/* listBox1.Items.Add(String.Format("File system event: File {0} {1}",
e.FullPath, e.ChangeType)); */
}
private void myWatcher_Renamed(object sender, RenamedEventArgs e)
{
/* listBox1.Items.Add(String.Format("File system event: File {0} {1}",
e.FullPath, e.ChangeType)); */
}
}
}
the problem is the created event is never fired, and only fires when a new folder is created. Can anyone help?

Luke,
use the forums of openNETcf to get answers to your question. My experience is that you get real quick replies which help you to go on with your project.
Kind regards
Udo

Related

eVc++ DLL used on .NET? Error

Hello,
I have written a DLL on eVC++. And now I want to use this DLL in a .NET program. But by "Add Reference" I got an error, that says:
This is not a .NET assembly.
So my question is, is it possible to using a eVC++ DLL on .NET?
If yes, what should I do, and if not, is there another way to do with this problem?
Thanks all

from http://www.csharphelp.com/archives/archive52.html
Code:
Call Unmanaged Code. Part 1 - Simple DLLImport
By Vyacheslav Biktagirov
Managed world is beautiful, I have all classes I want in FrameWork.. But what if I want call some unmanaged code? For instance, I have DLL written in C++, and want use it from C#.
Let's look some code. Our DLL exports some function, in CDecl convention, that sums two integers:
extern "C" __declspec(dllexport) __cdecl int sum(int a,int b);
And, of course, we want reuse this code in C#. We must recall, that it is no "direct" way to call unmanaged code, but we must inform the compiler, what we want to call, how, and where is needed code located.
[DllImport("TestDll.dll", EntryPoint="sum",
ExactSpelling=false,CallingConvention=CallingConvention.Cdecl)]
static extern int sum(int a,int b);
and now we can call it like normal C# function.
x=5;
y=7;
z=sum(x,y); // x will receive 12
Here is full C# client code - tested for Beta2.
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.Runtime.InteropServices;
namespace WindowsApplication6
{
///
/// Summary description for Form1.
///
public class Form1 : System.Windows.Forms.Form
{
private System.Windows.Forms.Button button1;
private System.Windows.Forms.TextBox textBox1;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.TextBox textBox2;
private System.Windows.Forms.Label label2;
private System.Windows.Forms.TextBox textBox3;
///
/// Required designer variable.
///
private System.ComponentModel.Container components = null;
public Form1()
{
//
// Required for Windows Form Designer support
//
InitializeComponent();
//
// TODO: Add any constructor code after InitializeComponent call
//
}
///
/// Clean up any resources being used.
///
protected override void Dispose( bool disposing )
{
if( disposing )
{
if (components != null)
{
components.Dispose();
}
}
base.Dispose( disposing );
}
#region Windows Form Designer generated code
///
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
///
private void InitializeComponent()
{
this.button1 = new System.Windows.Forms.Button();
this.textBox1 = new System.Windows.Forms.TextBox();
this.label1 = new System.Windows.Forms.Label();
this.textBox2 = new System.Windows.Forms.TextBox();
this.label2 = new System.Windows.Forms.Label();
this.textBox3 = new System.Windows.Forms.TextBox();
this.SuspendLayout();
//
// button1
//
this.button1.Location = new System.Drawing.Point(64, 192);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(144, 64);
this.button1.TabIndex = 0;
this.button1.Text = "call sum";
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// textBox1
//
this.textBox1.Location = new System.Drawing.Point(40, 120);
this.textBox1.Name = "textBox1";
this.textBox1.Size = new System.Drawing.Size(72, 22);
this.textBox1.TabIndex = 1;
this.textBox1.Text = "2";
//
// label1
//
this.label1.Location = new System.Drawing.Point(128, 128);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(16, 16);
this.label1.TabIndex = 2;
this.label1.Text = "+";
//
// textBox2
//
this.textBox2.Location = new System.Drawing.Point(152, 120);
this.textBox2.Name = "textBox2";
this.textBox2.Size = new System.Drawing.Size(56, 22);
this.textBox2.TabIndex = 3;
this.textBox2.Text = "3";
//
// label2
//
this.label2.Location = new System.Drawing.Point(224, 120);
this.label2.Name = "label2";
this.label2.Size = new System.Drawing.Size(24, 23);
this.label2.TabIndex = 4;
this.label2.Text = "=";
//
// textBox3
//
this.textBox3.Location = new System.Drawing.Point(248, 120);
this.textBox3.Name = "textBox3";
this.textBox3.Size = new System.Drawing.Size(112, 22);
this.textBox3.TabIndex = 5;
this.textBox3.Text = "5";
//
// Form1
//
this.AutoScaleBaseSize = new System.Drawing.Size(6, 15);
this.ClientSize = new System.Drawing.Size(576, 322);
this.Controls.AddRange(new System.Windows.Forms.Control[] {this.textBox3,this.label2,this.textBox2,this.label1,this.textBox1,this.button1});
this.Name = "Form1";
this.Text = "Form1";
this.ResumeLayout(false);
}
#endregion
///
/// The main entry point for the application.
///
[STAThread]
static void Main()
{
Application.Run(new Form1());
}
#region My Code
#region Dll Imports
[DllImport("TestDll.dll", EntryPoint="sum",
ExactSpelling=false,CallingConvention=CallingConvention.Cdecl)]
static extern int sum(int a,int b);
#endregion
#region Button Click Events
private void button1_Click(object sender, System.EventArgs e)
{
textBox3.Text=(int.Parse(textBox1.Text)+int.Parse(textBox2.Text)).ToString();
}
#endregion
#endregion
}
}
It sounds very simple, becouse "int" is isomorphic type, says, int in C# and ind C++ is identical. What we can do, when we want operate non-isomorhic types, like String? Recall, that .NET string is some Class, while C++ string is char*,or wchar_t*,or BSTR, .. String may be embedded in a structure, or pointed by pointer, or even something more exotic. Let's call some string function.
[DllImport("Advapi32.dll", EntryPoint="GetUserName", ExactSpelling=false,
SetLastError=true)]
static extern bool GetUserName(
[MarshalAs(UnmanagedType.LPArray)] byte[] lpBuffer,
[MarshalAs(UnmanagedType.LPArray)] Int32[] nSize );
This function receives two parameters: char* and int*. Becouse we must allocate char* buffer and receive string by pointer, we can't use UnmanagedType.LPStr attribute, so we pass ANSI string as byte array. int* is more simple-it's 1-element Int32 array. Let's call it:
private void button2_Click(object sender, System.EventArgs e)
{
byte[] str=new byte[20];
Int32[] len=new Int32[1];
len[0]=20;
GetUserName(str,len);
MessageBox.Show(System.Text.Encoding.ASCII.GetString(str));
}
We allocate 20 bytes for receiving ANSI string,one element in Int32 array, set 20 as max string length and call it. For receiving string from byte array I used Text.Encoding.ASCII class.

OK, so been trying to figure out what happens when you use SEUS.
It checks for internet connection by loading this URL:
Code:
http://emma.extranet.sonyericsson.com/ns/no-cache
I've figured out quite a bit.
Sony Ericsson has implemented something called Tampered Device Service.
This checks if the devices has been tampered with.
This service works from this server:
Code:
tds.sonyericsson.com
Then for the actual firmware download.
This is done by downloading 2 *.ser.gz which tells SEUS what Software customization to get and is sessions specific.
The customization ser.gz file looks something like this:
Code:
CDA=1233-7027_NjKhzOzTUsfXvPg40lyh6aTl.ser.gz
And it's downloaded from:
Code:
emma.extranet.sonyericsson.com
It's done via some sort of search mechanism on the server.
That looks like this:
Code:
ns/usdoe1/2/script/search/TAC8=35941903/CDA=1233-7027_By5JACZqd1R7JOpLu6qvwK8N.ser.gz
After that it's downloading the actual firmware files.
They are downloaded in bin format which I haven't been able to unpack yet.
They are also downloaded from the emma server and is named something like:
Code:
277795427_k9ABo3YVh+8klYUKwllGLDcJ.bin - ~14.3 MB
277835617_ZpJseUr9e09U5h2Cz81+5vcT.bin ~149 MB
Then it does a netbios call which has some sort of HEX code.
And then check the Internet connection again:
Code:
http://emma.extranet.sonyericsson.com/ns/no-cache
Now it starts up a service called:
Code:
/fq/ServiceClientDbServlet
This service runs from this server:
Code:
ma3.extranet.sonyericsson.com
This last part is done twice in a row.
Inside one of the *ser.gz files is a *.ser file which contains some code and instructions. Some parts is encrypted but most of the code is not.
See the complete code in post #2
I don't quite know what to do with all this info yet.
But hopefully something useful will come of this.
Just wanted to share a bit of my knowledge, hope it's useful for some of you here.

Code:
import com.sonyericsson.cs.ma.tess.api.ServiceException;
import com.sonyericsson.cs.ma.tess.api.ServiceRuntimeException;
import com.sonyericsson.cs.ma.tess.api.TessFile;
import com.sonyericsson.cs.ma.tess.api.UI;
import com.sonyericsson.cs.ma.tess.api.device.IdentificationResult;
import com.sonyericsson.cs.ma.tess.api.inject.InjectConfigValue;
import com.sonyericsson.cs.ma.tess.api.inject.InjectRef;
import com.sonyericsson.cs.ma.tess.api.inject.IncludeFor;
import com.sonyericsson.cs.ma.tess.api.inject.ServiceMethod;
import com.sonyericsson.cs.ma.tess.api.logging.Logging;
import com.sonyericsson.cs.ma.tess.api.protocols.DataArea;
import com.sonyericsson.cs.ma.tess.api.protocols.ProtocolFactory;
import com.sonyericsson.cs.ma.tess.api.protocols.VersionResponse;
import com.sonyericsson.cs.ma.tess.api.protocols.s1.S1Protocol;
import com.sonyericsson.cs.ma.tess.api.protocols.s1.S1Protocol.ShutdownMode;
import com.sonyericsson.cs.ma.tess.api.secs.SECSUnitData;
import com.sonyericsson.cs.ma.tess.api.secs.SECSUtil;
import com.sonyericsson.cs.ma.tess.api.service.ServiceResult;
import com.sonyericsson.cs.ma.tess.api.service.ServiceResultType;
import com.sonyericsson.cs.ma.tess.api.service.ServiceType;
import com.sonyericsson.cs.ma.tess.api.statistics.DiagnosticsUtil;
import com.sonyericsson.cs.ma.tess.api.statistics.StatisticsUtil;
import com.sonyericsson.cs.ma.tess.api.statistics.StatisticsUtil.SoftwareComponent;
import com.sonyericsson.cs.ma.tess.api.ta.TAUnit;
import com.sonyericsson.cs.ma.tess.api.util.StringUtil;
import com.sonyericsson.cs.ma.tess.api.x10.MarlinCertificateUpdate;
import com.sonyericsson.cs.ma.tess.api.zip.ZipFileUtil;
import java.io.InputStream;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.List;
import org.w3c.dom.Document;
/**
* S1 QSD8250 eSheep platform Main Services implementation.
*
* Services in this logic implemented for use in COMMERCIAL services!
*
*/
public class S1QSD8250eSheepMainServicesLIVE
{
@InjectRef
private ProtocolFactory aProtocolFactory;
@InjectRef
private UI aUI;
@InjectRef
private Logging aLogger;
@InjectRef
private IdentificationResult aIdentifiers;
@InjectRef
private ZipFileUtil aZipFileUtil;
@InjectRef
private static DiagnosticsUtil aDiagnostics;
@InjectRef
private StatisticsUtil aStatistics;
@InjectRef
private SECSUtil aSECS;
@InjectRef
private StringUtil aStringUtil;
@InjectRef
private ClientEnvironment aClientEnvironment;
@InjectRef
private MarlinCertificateUpdate marlinCertUpdate;
// File references
// Loader reference
@InjectConfigValue("cLOADER")
private TessFile aLoader;
// App-SW reference - Exclude from Activation
@IncludeFor([ServiceType.CUSTOMIZE, ServiceType.SOFTWARE_UPDATE,
ServiceType.SOFTWARE_UPDATE_CONTENT_REFRESH])
@InjectConfigValue("cAPP_SW")
private TessFile aAppSW;
// FSP Reference - Exclude from Activation
@IncludeFor([ServiceType.CUSTOMIZE, ServiceType.SOFTWARE_UPDATE,
ServiceType.SOFTWARE_UPDATE_CONTENT_REFRESH])
@InjectConfigValue("cFSP")
private TessFile aFSP;
// miscTA units
// Startup/Shutdown flag used for indicating successful flash.
@InjectConfigValue("cTA_FLASH_STARTUP_SHUTDOWN_RESULT")
private String aStrTaFlashStartShutdownResult;
// Startup/Shutdown flag used for indicating successful flash.
@InjectConfigValue("cTA_EDREAM_FLASH_IN_PROGRESS")
private String aStrTaEDreamFlashStartShutdownResult;
// SIMlock data unit
@InjectConfigValue("cTA_SIMLOCK_DATA")
private String aStrTaSimlockData;
// Loose temp data unit
@InjectConfigValue("cTA_LOOSE_TEMP")
private String aStrTaLooseTemp;
// TA_APPLICATION_BUFFER_DATA_ARRAY[2]
@InjectConfigValue("cTA_APPLICATION_BUFFER_DATA_ARRAY2")
private String aStrTaApplicationBufferDataArray2;
// TA_APPLICATION_BUFFER_DATA_ARRAY[3]
@InjectConfigValue("cTA_APPLICATION_BUFFER_DATA_ARRAY3")
private String aStrTaApplicationBufferDataArray3;
// TA_MARLIN_DRM_KEY_UPDATE_FLAG
@InjectConfigValue("cTA_MARLIN_DRM_KEY_UPDATE_FLAG")
private String aStrTaMarlinDRMKeyUpdateFlag;
// Parameter names
@InjectConfigValue("cTA_APPLICATION_BUFFER_DATA_ARRAY0_NAME")
private String aTaApplicationBufferDataArray0Name;
@InjectConfigValue("cTA_APPLICATION_BUFFER_DATA_ARRAY1_NAME")
private String aTaApplicationBufferDataArray1Name;
@InjectConfigValue("cTA_APPLICATION_BUFFER_DATA_ARRAY2_NAME")
private String aTaApplicationBufferDataArray2Name;
@InjectConfigValue("cTA_APPLICATION_BUFFER_DATA_ARRAY3_NAME")
private String aTaApplicationBufferDataArray3Name;
@InjectConfigValue("cTA_SIMLOCK_DATA_NAME")
private String aTaSimlockDataName;
@InjectConfigValue("cTA_LOOSE_TEMP_NAME")
private String aTaLooseTempName;
@InjectConfigValue("cVERSION_RESPONSE")
private String aVersionResponseName;
// miscTA unit values
// Startup/Shutdown flag, cTA_FLASH_STARTUP_SHUTDOWN_RESULT, values
@InjectConfigValue("cTA_FLASH_STARTUP_SHUTDOWN_RESULT_ONGOING_VALUE")
private String aTaFlashStartupShutdownResultOngoingValue;
@InjectConfigValue("cTA_FLASH_STARTUP_SHUTDOWN_RESULT_FINISHED_VALUE")
private String aTaFlashStartupShutdownResultFinishedValue;
// Startup/Shutdown flag, cTA_EDREAM_FLASH_STARTUP_SHUTDOWN_RESULT, values
@InjectConfigValue("cTA_EDREAM_FLASH_FLASH_IN_PROGRESS_ONGOING")
private String aTaEDreamFlashStartupShutdownResultOngoingValue;
@InjectConfigValue("cTA_EDREAM_FLASH_FLASH_IN_PROGRESS_COMPLETED")
private String aTaEDreamFlashStartupShutdownResultFinishedValue;
// Update.xml values
// File name
private static String UPDATE_XML_FILE_NAME = "update.xml";
// NOERASE tag value
private static String UPDATE_XML_NOERASE_TAG = "NOERASE";
// SIMLOCK tag value
private static String UPDATE_XML_SIMLOCK_TAG = "SIMLOCK";
// PRESERVECACHE tag value
private static String UPDATE_XML_PRESERVECACHE_TAG = "PRESERVECACHE";
// UI Progress texts
@InjectConfigValue("cSEND_DATA")
private String aSendDataText;
@InjectConfigValue("cSEND_DATA_DONE")
private String aSendDataDoneText;
@InjectConfigValue("cSERVICE_FINALIZING")
private String aServiceFinalizingText;
@InjectConfigValue("cSERVICE_FINALIZING_DONE")
private String aServiceFinalizingDoneText;
@InjectConfigValue("cSERVICE_INITIALIZATION")
private String aServiceInitializationText;
@InjectConfigValue("cSERVICE_INITIALIZATION_DONE")
private String aServiceInitializationDoneText;
/**
* ACTIVATION
*
*/
@ServiceMethod(ServiceType.ACTIVATION)
public ServiceResult activation() throws ServiceException
{
boolean vDoActivation = true;
showInitServiceText();
try
{
S1Protocol vS1 = aProtocolFactory.getProtocol(S1Protocol.class);
int vTaSimlockData = Integer.parseInt(aStrTaSimlockData);
int vTaLooseTemp = Integer.parseInt(aStrTaLooseTemp);
int vTaApplicationBufferDataArray2 =
Integer.parseInt(aStrTaApplicationBufferDataArray2);
int vTaApplicationBufferDataArray3 =
Integer.parseInt(aStrTaApplicationBufferDataArray3);
// Check if activation is needed?
// Send loader
vS1.sendFile(aLoader);
vS1.openDataArea(DataArea.MISC_TA);
// Read the SIMlock data from TA_SIMLOCK_DATA
byte[] vSIMlockData = vS1.readDataArea(vTaSimlockData);
if (vSIMlockData != null && vSIMlockData.length >= 20)
{
// Check 20 first bytes (if set to 0)
for (int vI = 0; vI < 20; vI++)
{
if (vSIMlockData[vI] != 0)
{
vDoActivation = false;
break;
}
}
}
else
{
aLogger
.error("Could not determine if activation is needed. Not possible to read enough data.");
throw new ServiceRuntimeException("Error when activating phone.");
}
// Do activation?
if (vDoActivation)
{
// Verify that the dongle is present
aSECS.ensureDongleReady();
String vIMEI = aIdentifiers.getIMEI();
SECSUnitData[] vInputData = getS1SIMLockSignatureInputData(vS1);
SECSUnitData[] vOutputData =
vS1.getS1SIMLockSignature(vInputData, vIMEI);
if (vOutputData != null && vOutputData.length > 6)
{
byte[] vEmpty = new byte[1];
vEmpty[0] = 0x00;
vS1.writeToDataArea(vTaApplicationBufferDataArray2, vEmpty);
vS1.writeToDataArea(
vTaApplicationBufferDataArray3,
vOutputData[3].getUnitData());
vS1
.writeToDataArea(vTaSimlockData, vOutputData[4]
.getUnitData());
vS1.writeToDataArea(vTaLooseTemp, vOutputData[5].getUnitData());
}
else
{
aLogger.error("Not enough data in response from SECS server.");
throw new ServiceRuntimeException(
"Error occured when communicating with server.");
}
}
else
{
aUI
.showText("ACTIVATION NOT NEEDED! This unit has been "
+ "activated already. The service is exiting without execution.");
}
showFinalizingText();
vS1.closeDataArea();
vS1.shutdownDevice(ShutdownMode.DISCONNECT);
}
catch (ServiceException pEx)
{
aLogger.error("Exception when executing ACTIVATION service.", pEx);
throw pEx;
}
return ServiceResult.SUCCESSFUL;
}
/**
* CUSTOMIZE
*
*/
@ServiceMethod(ServiceType.CUSTOMIZE)
public ServiceResult customize() throws ServiceException
{
showInitServiceText();
ServiceResult vServiceResult =
new ServiceResult(
ServiceResultType.SUCCESSFUL,
"Customize EXECUTED! ACTIVATION NEEDED!",
null);
try
{
S1Protocol vS1 = aProtocolFactory.getProtocol(S1Protocol.class);
int vTaSimlockData = Integer.parseInt(aStrTaSimlockData);
int vTaLooseTemp = Integer.parseInt(aStrTaLooseTemp);
showSendingDataText();
// Send loader
vS1.sendFile(aLoader);
vS1.openDataArea(DataArea.MISC_TA);
readDID(vS1);
updateMartinKey(vS1);
setFlashStartupShutdownFlagOngoing(vS1);
// Send App-SW
sendFile(vS1, aAppSW);
// Send FSP
if ("false".equalsIgnoreCase(aFSP.getProperty("SIMLockCustomized"))
&& "true".equalsIgnoreCase(aIdentifiers
.getIdentifier("SIMLockReusable")))
{
// quick-customize
String[] vExcludeTags = new String[1];
vExcludeTags[0] = UPDATE_XML_SIMLOCK_TAG;
String[] vFilesToExcludeFromFSP = parseFile(aFSP, vExcludeTags);
// Send FSP
sendZipFile(vS1, aFSP, vFilesToExcludeFromFSP);
vServiceResult =
new ServiceResult(
ServiceResultType.SUCCESSFUL,
"Quick Customize EXECUTED! NO ACTIVATION NEEDED!",
null);
}
else
{
// customize
// Tamper the simlock data
tamperSimlockData(vS1);
// Set the simlock data unit id to loose temp
aFSP.modifyData(vTaSimlockData, vTaLooseTemp);
sendFile(vS1, aFSP);
}
setFlashStartupShutdownFlagFinished(vS1);
showSendingDataTextDone();
showFinalizingText();
vS1.closeDataArea();
vS1.shutdownDevice(ShutdownMode.DISCONNECT);
storeSoftwareAfterStatistics();
}
catch (ServiceException pEx)
{
aLogger.error("Exception when executing CUSTOMIZE service.", pEx);
throw pEx;
}
return vServiceResult;
}
/**
* SOFTWARE UPDATE
*
*/
@ServiceMethod(ServiceType.SOFTWARE_UPDATE)
public ServiceResult softwareUpdate() throws ServiceException
{
showInitServiceText();
try
{
S1Protocol vS1 = aProtocolFactory.getProtocol(S1Protocol.class);
showSendingDataText();
// Send loader
vS1.sendFile(aLoader);
vS1.openDataArea(DataArea.MISC_TA);
readDID(vS1);
updateMartinKey(vS1);
// Search the APP-SW zip file for xml file and metadata. Exclude user
// data
String[] vExcludeTags = new String[1];
vExcludeTags[0] = UPDATE_XML_NOERASE_TAG;
String[] vFilesToExcludeFromAPPSW = parseFile(aAppSW, vExcludeTags);
// Search the FSP zip file for xml file and metadata. Exclude user data
// and simlock if existing
vExcludeTags = new String[2];
vExcludeTags[0] = UPDATE_XML_NOERASE_TAG;
vExcludeTags[1] = UPDATE_XML_SIMLOCK_TAG;
String[] vFilesToExcludeFromFSP = parseFile(aFSP, vExcludeTags);
setFlashStartupShutdownFlagOngoing(vS1);
// Send App-SW
// Anything to exclude?
if (vFilesToExcludeFromAPPSW != null
&& vFilesToExcludeFromAPPSW.length > 0)
{
sendZipFile(vS1, aAppSW, vFilesToExcludeFromAPPSW);
}
else
{
sendFile(vS1, aAppSW);
}
// Send FSP
sendZipFile(vS1, aFSP, vFilesToExcludeFromFSP);
setFlashStartupShutdownFlagFinished(vS1);
showSendingDataTextDone();
showFinalizingText();
vS1.closeDataArea();
vS1.shutdownDevice(ShutdownMode.DISCONNECT);
storeSoftwareAfterStatistics();
}
catch (ServiceException pEx)
{
aLogger
.error("Exception when executing SOFTWARE UPDATE service.", pEx);
throw pEx;
}
return ServiceResult.SUCCESSFUL;
}
/**
* SOFTWARE UPDATE CONTENT REFRESH
*
*/
@ServiceMethod(ServiceType.SOFTWARE_UPDATE_CONTENT_REFRESH)
public ServiceResult softwareUpdateContentRefresh() throws ServiceException
{
showInitServiceText();
try
{
S1Protocol vS1 = aProtocolFactory.getProtocol(S1Protocol.class);
showSendingDataText();
// Send loader
vS1.sendFile(aLoader);
vS1.openDataArea(DataArea.MISC_TA);
readDID(vS1);
updateMartinKey(vS1);
// Search the FSP zip file for xml file and metadata. Exclude
// simlock if existing
String[] vExcludeTags = new String[0];
aLogger.debug("isSwapEnabled is: "
+ aClientEnvironment.isSwapEnabled());
// Check the client environment.
if (!aClientEnvironment.isSwapEnabled())
{
aLogger.debug("Cache partition will be preserved.");
vExcludeTags = new String[1];
vExcludeTags[0] = UPDATE_XML_PRESERVECACHE_TAG;
}
// Temporarily catch the exception
String[] vFilesToExcludeFromAPPSW = parseFile(aAppSW, vExcludeTags);
vExcludeTags = new String[1];
vExcludeTags[0] = UPDATE_XML_SIMLOCK_TAG;
String[] vFilesToExcludeFromFSP = parseFile(aFSP, vExcludeTags);
setFlashStartupShutdownFlagOngoing(vS1);
// Anything to exclude?
if (vFilesToExcludeFromAPPSW != null
&& vFilesToExcludeFromAPPSW.length > 0)
{
sendZipFile(vS1, aAppSW, vFilesToExcludeFromAPPSW);
}
else
{
sendFile(vS1, aAppSW);
}
// Send FSP
sendZipFile(vS1, aFSP, vFilesToExcludeFromFSP);
setFlashStartupShutdownFlagFinished(vS1);
showSendingDataTextDone();
showFinalizingText();
vS1.closeDataArea();
vS1.shutdownDevice(ShutdownMode.DISCONNECT);
storeSoftwareAfterStatistics();
}
catch (ServiceException pEx)
{
aLogger
.error(
"Exception when executing SOFTWARE UPDATE CONTENT REFRESH service.",
pEx);
throw pEx;
}
return ServiceResult.SUCCESSFUL;
}
/**
* Private help method to get DID data from device, if available.
*
*/
private void readDID(S1Protocol pS1)
{
byte[] vEmptyUnit = new byte[0];
List<TAUnit> vUnits = new ArrayList<TAUnit>();
aLogger.debug("Reading diagnostic data.");
final int vLastUnit = 10009;
final int vFirstUnit = 10000;
for (int vUnit = vFirstUnit; vUnit <= vLastUnit; vUnit++)
{
try
{
byte[] vData = pS1.readDataArea(vUnit);
if (vData != null && vData.length > 0)
{
pS1.writeToDataArea(vUnit, vEmptyUnit);
vUnits.add(new TAUnit(vUnit, vData));
}
}
catch (ServiceException vServiceException)
{
}
}
if (vUnits.size() > 0)
{
byte[] vDiagnosticData;
try
{
aLogger.debug("Diagnostic data found, sending diagnostic data.");
vDiagnosticData = aDiagnostics.createDiagnosticData(vUnits);
aDiagnostics.storeDiagnostic(aIdentifiers.getIMEI(), aIdentifiers
.getApplicationSoftwareID(), aIdentifiers
.getApplicationSoftwareRev(), vDiagnosticData, "06");
}
catch (ServiceException pEx)
{
}
}
}
/**
* Private help method to tamper the simlock data.
*
*/
private void tamperSimlockData(S1Protocol pS1) throws ServiceException
{
int vTaSimlockData = Integer.parseInt(aStrTaSimlockData);
// Read the SIMlock data from TA_SIMLOCK_DATA
byte[] vSIMlockData = pS1.readDataArea(vTaSimlockData);
if (vSIMlockData != null && vSIMlockData.length > 0)
{
// Tamper 20 first bytes (set to 0)
// Make sure enough data is read
if (vSIMlockData.length >= 20)
{
for (int vI = 0; vI < 20; vI++)
{
vSIMlockData[vI] = 0;
}
}
else
{
throw new ServiceRuntimeException(
"Data read, but not enough to tamper.");
}
// Write back the tampered SIMlock data to TA_SIMLOCK_DATA
pS1.writeToDataArea(vTaSimlockData, vSIMlockData);
}
else
{
throw new ServiceRuntimeException("Could not read data.");
}
}
/**
* Private help method to get S1 SIMlock signature input data from device.
*
*/
private SECSUnitData[] getS1SIMLockSignatureInputData(S1Protocol pS1)
throws ServiceException
{
SECSUnitData[] vSECSUnitData = new SECSUnitData[7];
int vTaSimlockData = Integer.parseInt(aStrTaSimlockData);
int vTaLooseTemp = Integer.parseInt(aStrTaLooseTemp);
int vTaApplicationBufferDataArray3 =
Integer.parseInt(aStrTaApplicationBufferDataArray3);
byte[] vEmpty = new byte[1];
vEmpty[0] = 0x00;
vSECSUnitData[0] =
new SECSUnitData(aTaApplicationBufferDataArray0Name, vEmpty);
vSECSUnitData[1] =
new SECSUnitData(aTaApplicationBufferDataArray1Name, vEmpty);
vSECSUnitData[2] =
new SECSUnitData(aTaApplicationBufferDataArray2Name, vEmpty);
byte[] vInputUnitData = pS1.readDataArea(vTaApplicationBufferDataArray3);
vSECSUnitData[3] =
new SECSUnitData(aTaApplicationBufferDataArray3Name, vInputUnitData);
vInputUnitData = pS1.readDataArea(vTaSimlockData);
vSECSUnitData[4] = new SECSUnitData(aTaSimlockDataName, vInputUnitData);
vInputUnitData = pS1.readDataArea(vTaLooseTemp);
vSECSUnitData[5] = new SECSUnitData(aTaLooseTempName, vInputUnitData);
VersionResponse vVersionResponse = pS1.getVersionResponse();
byte[] vVersionResponseArray =
vVersionResponse.getVersionResponseAsBytes();
vInputUnitData = vVersionResponseArray;
vSECSUnitData[6] = new SECSUnitData(aVersionResponseName, vInputUnitData);
return vSECSUnitData;
}
/**
* Parses the specified file for a xml metadata file and the parses the xml
* file for the tags defined. Tag values are then returned as a string array.
*
*/
private String[] parseFile(TessFile pFile, String[] pTags)
throws ServiceException
{
ArrayList<String> vResult = new ArrayList<String>();
Document vUpdateXML =
aZipFileUtil.getXMLFile(pFile, UPDATE_XML_FILE_NAME);
if (vUpdateXML != null)
{
if (pTags != null)
{
for (String vTag : pTags)
{
String[] vFilesFound =
aZipFileUtil.getXMLTextContentByTagName(vUpdateXML, vTag);
if (vFilesFound != null && vFilesFound.length > 0)
{
aLogger.debug("Found files to exclude from "
+ pFile.getFileName()
+ " from tag "
+ vTag
+ " in "
+ UPDATE_XML_FILE_NAME
+ ":");
for (String vFileName : vFilesFound)
{
aLogger.debug(vFileName);
}
vResult.addAll(Arrays.asList(vFilesFound));
}
}
}
}
else
{
aLogger.debug("No " + UPDATE_XML_FILE_NAME + " found");
// throw new
throw new ServiceRuntimeException("Could not find a "
+ UPDATE_XML_FILE_NAME
+ " in the zip file, abort.");
}
return vResult.toArray(new String[vResult.size()]);
}
private void updateMartinKey(S1Protocol pS1) throws ServiceException
{
int vTaMarlinDRMKeyUpdateFlag =
Integer.parseInt(aStrTaMarlinDRMKeyUpdateFlag);
byte[] vFlagValue = null;
pS1.openDataArea(DataArea.MISC_TA);
// check the flag
try
{
vFlagValue = pS1.readDataArea(vTaMarlinDRMKeyUpdateFlag);
if (vFlagValue != null
&& aStringUtil
.convertByteArrayToString(vFlagValue)
.equalsIgnoreCase("01"))
{
// updated already
return;
}
}
catch (ServiceException vServiceException)
{
// exception indicates no update has been done
}
// check if update is available for this unit
if (marlinCertUpdate.isNewCertificateAvailable())
{
// update the cert
InputStream vTAFileInputStream =
marlinCertUpdate.getCertificateTAInputStream();
pS1.sendTAFileFromStream(vTAFileInputStream);
aLogger.debug("Marlin key updated.");
}
// set the flag as updated
pS1.writeToDataArea(vTaMarlinDRMKeyUpdateFlag, aStringUtil
.convertStringToByteArray("0x01"));
return;
}
/**
* Private help method to set the flash ongoing flag to ongoing.
*
* @throws ServiceException
*
*/
private void setFlashStartupShutdownFlagOngoing(S1Protocol pS1)
throws ServiceException
{
int vTaFlashStartupShutdownResult =
Integer.parseInt(aStrTaFlashStartShutdownResult);
int vTaEDreamFlashStartupShutdownResult =
Integer.parseInt(aStrTaEDreamFlashStartShutdownResult);
// Set the TA_FLASH_STARTUP_SHUTDOWN_RESULT (2227) flag to 0xA0000000 to
// indicate
// flash ongoing
pS1
.writeToDataArea(
vTaFlashStartupShutdownResult,
aStringUtil
.convertStringToByteArray(aTaFlashStartupShutdownResultOngoingValue));
// Set the 10100 flag specific for eDream
// Set the TA_EDREAM_FLASH_STARTUP_SHUTDOWN_RESULT (10100) flag to 0x01 to
// indicate
// flash ongoing
pS1
.writeToDataArea(
vTaEDreamFlashStartupShutdownResult,
aStringUtil
.convertStringToByteArray(aTaEDreamFlashStartupShutdownResultOngoingValue));
}
/**
* Private help method to set the flash ongoing flag to finished.
*
* @throws ServiceException
*
*/
private void setFlashStartupShutdownFlagFinished(S1Protocol pS1)
throws ServiceException
{
int vTaFlashStartupShutdownResult =
Integer.parseInt(aStrTaFlashStartShutdownResult);
int vTaEDreamFlashStartupShutdownResult =
Integer.parseInt(aStrTaEDreamFlashStartShutdownResult);
// Set the TA_FLASH_STARTUP_SHUTDOWN_RESULT (2227) flag to 0xAA000000 to
// indicate
// flash finished
pS1
.writeToDataArea(
vTaFlashStartupShutdownResult,
aStringUtil
.convertStringToByteArray(aTaFlashStartupShutdownResultFinishedValue));
// Set the 10100 flag specific for eDream
// Set the TA_EDREAM_FLASH_STARTUP_SHUTDOWN_RESULT (10100) flag to 0x00 to
// indicate flash finished
pS1
.writeToDataArea(
vTaEDreamFlashStartupShutdownResult,
aStringUtil
.convertStringToByteArray(aTaEDreamFlashStartupShutdownResultFinishedValue));
}
/**
* Private help method to store software and CDF ids and versions.
*
*/
private void storeSoftwareAfterStatistics()
{
String vAPPSWId = aAppSW.getProperty("Id");
String vAPPSWVer = aAppSW.getVersion();
String vCDFId = aFSP.getProperty("CDFId");
String vCDFVer = aFSP.getProperty("CDFVer");
if (vAPPSWId != null)
{
aStatistics.storeSoftwareAfter(
SoftwareComponent.SW1,
vAPPSWId,
vAPPSWVer);
}
if (vCDFId != null)
{
aStatistics.storeCustomizationAfter(vCDFId, vCDFVer);
}
}
private void sendZipFile(
S1Protocol pS1,
TessFile pFile,
String[] pFilesToExclude) throws ServiceException
{
aLogger.debug("Sending "
+ pFile.getFileName()
+ ", "
+ pFile.getVersion());
pS1.sendZipFile(pFile, pFilesToExclude);
}
private void sendFile(S1Protocol pS1, TessFile pFile)
throws ServiceException
{
aLogger.debug("Sending "
+ pFile.getFileName()
+ ", "
+ pFile.getVersion());
pS1.sendFile(pFile);
}
/**
* Private help method to display start sending data text.
*
*/
private void showSendingDataText()
{
aUI.showText(aSendDataText);
}
/**
* Private help method to display start sending data done text.
*
*/
private void showSendingDataTextDone()
{
aUI.showText(aSendDataDoneText);
}
/**
* Private help method to display start up and initialization text.
*
*/
private void showInitServiceText()
{
aUI.showText(aServiceInitializationText);
aUI.showText(aServiceInitializationDoneText);
aUI.showText("");
}
/**
* Private help method to display please wait text.
*
*/
private void showFinalizingText()
{
aUI.showText("");
aUI.showText(aServiceFinalizingText);
aUI.showText(aServiceFinalizingDoneText);
}
}

Reserved for future use.

wow seems u done some packet sniffing...
may be u should contact Bin4ry regarding this... he is involved in FreeXperia Project for Arc/Play...
i am sure he can shed some more light on this matter...

Figured out the *.bin files is the actual files that also goes in the blob_fs folder:
Code:
%programfiles%\Sony Ericsson\Update Service\db\
So they are decryptable using the known method.

Tampered Device Service does in fact check for Root and custom software.
Don't know if this will have an effect in the updating process from SEUS.

So, it's a bad news huh. Keep looking. Thanks for the info.
Sent from my X10i using XDA App

Confirmed that devices that has been rooted and modified in software will not be eligible for 2.3.3 update. You will have to flash back a stock unrooted firmware before updating to 2.3.3

Of course. SE said that in their blog. Better backup all data in SD Card and format it too. I don't think the SEUS' intelligent enough to check out that the SD Card contains CyanogenMod folder as busybox and xRecovery
EDIT: I tried to find the update 2.1 package in my computer after repaired my phone for several times and I can't find it. It's of course that it's deleted as soon as the update completed.

I believe SEUS works like the Flash Tool and Pay-Per-Update service through fastgsm.com and davince.
Flash Tool requires you to provide the firmware and place the sin files in the correct location.
Pay service requires a fee to install the correct sin files/firmware.
SEUS requires a CDA to determine which sin files/firmware to install.

I beg that the FlashTool works like SEUS cause without SEUS and other update services, where is FlashTool come from?

But what if SEUS change its method? Well, i still want to update and we will see how it goes.
Sent from my X10i using XDA App

Whatever method they choose, they can't close the door behind them. They need the access too. Flash Tool can be updated.
Nor would google allow that. JMHO

Yes, FT can be updated but it's development is kinda dead as of now, and we don't even have its source codes, so the other developers can't update it. Unless if Androxyde and Bin4ry want to work on FT again.

Hzu said:
Yes, FT can be updated but it's development is kinda dead as of now, and we don't even have its source codes, so the other developers can't update it. Unless if Androxyde and Bin4ry want to work on FT again.
Click to expand...
Click to collapse
Why are the devs acting like this is an issue? The Flash Tool already works on the ARC, so what are you worried about?

Work on Arc no mean it can work on X10, just like Arc has bootloader unlocked but no mean X10 can when update to 2.3.3

silveraero said:
Work on Arc no mean it can work on X10, just like Arc has bootloader unlocked but no mean X10 can when update to 2.3.3
Click to expand...
Click to collapse
You totally missed the point. The bootloader or root has NEVER mattered. When the NEVER has happened, then start your *****ing.

agentJBM said:
Why are the devs acting like this is an issue? The Flash Tool already works on the ARC, so what are you worried about?
Click to expand...
Click to collapse
What I mean is that IF SE changed their flashing method for the GB firmware and FT won't work for those who upgraded their X10 to GB. But another user has said that they won't since it requires them to start all over again.
Who knows, we're not the one who are developing the firmwares and we all should stop making assumptions(but some people aren't making assumptions, they are so sure they are right).

Hzu said:
What I mean is that IF SE changed their flashing method for the GB firmware and FT won't work for those who upgraded their X10 to GB. But another user has said that they won't since it requires them to start all over again.
Who knows, we're not the one who are developing the firmwares and we all should stop making assumptions(but some people aren't making assumptions, they are so sure they are right).
Click to expand...
Click to collapse
I am not pretending to know. However, you are failing to acknowledge that the Flash Tool is a modification of Update Service. The same method is used. Quit acting like this is nuclear science.

I told you, what IF they CHANGE the flashing method, then SEUS will also be updated with the new method.
Why am I repeating this anyway? Silly me.

database connect doesn't work properly

i've need to connect my app to an external database so i put my sqlite database on assets folder and i've follow this tutorial to make DBHelper.
now i want to show some record of database in my app but when i launch it, it give me an error like a table "linee" doesn't exists on my database but it exists!!!! this link cans proof it http://img689.imageshack.us/img689/926/ytvo.png
why???? it's a week that i can to fix this problem but i can't solve it
this is MyOpenHelper
Code:
public class MyOpenHelper extends SQLiteOpenHelper{
//The Android's default system path of your application database.
private static String DB_PATH ;
private SQLiteDatabase db;
private static String DB_NAME = "orari";
private final Context myContext;
public MyOpenHelper(Context context) {
super(context, DB_NAME, null, 1);// 1? its Database Version
if(android.os.Build.VERSION.SDK_INT >= 4.2){
DB_PATH = context.getApplicationInfo().dataDir + "/databases/";
} else {
DB_PATH = "/data/data/" + context.getPackageName() + "/databases/";
}
this.myContext = context;
}
public void createDataBase() throws IOException{
boolean dbExist = checkDataBase();
if(dbExist){
}else{
this.getReadableDatabase();
try{
copyDataBase();
}catch (IOException e){
throw new Error("Errore nel copiare il database");
}
}
}
private boolean checkDataBase(){
File dbFile=new File(DB_PATH+DB_NAME);
return dbFile.exists();
}
private void copyDataBase() throws IOException{
InputStream myInput=myContext.getAssets().open(DB_NAME);
String outFileName = DB_PATH+DB_NAME;
OutputStream myOutput=new FileOutputStream(outFileName);
byte[] buffer = new byte [1024];
int length;
while ((length=myInput.read(buffer))>0){
myOutput.write(buffer, 0, length);
}
myOutput.flush();
myOutput.close();
myInput.close();
}
public void openDataBase() throws SQLException{
String myPath=DB_PATH+DB_NAME;
db=SQLiteDatabase.openDatabase(myPath, null, SQLiteDatabase.OPEN_READWRITE);
}
[user=439709]@override[/user]
public void onCreate(SQLiteDatabase db) {
// TODO Auto-generated method stub
}
[user=439709]@override[/user]
public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) {
// TODO Auto-generated method stub
}
}

Retrieving cpu frequency

Hi everyone.
I want to retrieve the current cpu frequency in my app but I don't seem to be right.
In my code I want to read the "scaling_cpu_freq" file from internal storage.
This is the code:
Code:
private String ReadCPUMhz() {
String cpuMaxFreq = "";
int cur = 0;
try {
[user=1299008]@supp[/user]ressWarnings("resource")
BufferedReader maxi = new BufferedReader(new FileReader(new File("/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq")));
try{
cpuMaxFreq = maxi.readLine();
cur = Integer.parseInt(cpuMaxFreq);
cur = cur/1000;
} catch (Exception ex){
ex.printStackTrace();
}
} catch (FileNotFoundException f) {
f.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
}
return String.valueOf(cur);
}
The problem is that the method only returns 0, which is the initial value of the int "cur".
Can anybody help me?
Thanks in advance.

Here's the code I use:
Declare this class in your Activity
Code:
// Read current frequency from /sys in a separate thread
// This class assumes your TextView is declared and referenced in the OnCreate of the class this one is declared in
// And its variable name is mCurCpuFreq
protected class CurCPUThread extends Thread {
private static final String CURRENT_CPU = "/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq";
private boolean mInterrupt = false;
public void interrupt() {
mInterrupt = true;
}
[user=439709]@override[/user]
public void run() {
try {
while (!mInterrupt) {
sleep(400);
final String curFreq = readOneLine(CURRENT_CPU);
mCurCPUHandler.sendMessage(mCurCPUHandler.obtainMessage(0,
curFreq));
}
} catch (InterruptedException e) {
return;
}
}
}
// Update real-time current frequency & stats in a separate thread
protected static Handler mCurCPUHandler = new Handler() {
public void handleMessage(Message msg) {
mCurFreq.setText(toMHz((String) msg.obj));
final int p = Integer.parseInt((String) msg.obj);
new Thread(new Runnable() {
public void run() {
// Here I update a real-time graph of the current freq
}
}
}).start();
}
};
Helper methods used :
Code:
// Convert raw collected values to formatted MhZ
private static String toMHz(String mhzString) {
if (Integer.valueOf(mhzString) != null)
return String.valueOf(Integer.valueOf(mhzString) / 1000) + " MHz";
else
return "NaN";
}
// Iterate through the /sys file
public static String readOneLine(String fname) {
BufferedReader br;
String line = null;
try {
br = new BufferedReader(new FileReader(fname), 512);
try {
line = br.readLine();
} finally {
br.close();
}
} catch (Exception e) {
Log.e(TAG, "IO Exception when reading sys file", e);
// attempt to do magic!
return readFileViaShell(fname, true);
}
return line;
}
// Backup method if the above one fails
public static String readFileViaShell(String filePath, boolean useSu) {
CommandResult cr = null;
if (useSu) {
cr = new CMDProcessor().runSuCommand("cat " + filePath);
} else {
cr = new CMDProcessor().runShellCommand("cat " + filePath);
}
if (cr.success())
return cr.getStdout();
return null;
}
CMDProcessor.java and its dependencies attached to this post

[GUIDE] How to get Busybox Info,Root Info , Dex

There are some app required root busy box deodex i have wrote some java that will help you to know that the phone is rooted , busy box available , deodex
First You need to make New Java Named Logger
Content are below
Code:
/*
* This File is Part of Almas Api
*
* Copyright (c) 2015 Sahid S Almas
*
* This code are licensed under the terms of the Apache License Version 2.0
* You may use this code according to either of these licenses as is most appropriate
* for your project on a case-by-case basis.
*/
package sahidsalmas.api.internel;
import android.util.Log;
import java.util.ArrayList;
public class Logger {
private ArrayList<String> mDebugLogs = new ArrayList<>();
private ArrayList<String> mErrorLogs = new ArrayList<>();
private ArrayList<String> mInfoLogs = new ArrayList<>();
private int DLogs = 0;
private int ELogs = 0;
private int ILogs = 0;
private String TAG_NAME;
public Logger(String nam) {
setTAG_NAME(nam);
}
public void addDLogs(String logs) {
DLogs++;
mDebugLogs.add(logs);
}
public void addELogs(String logs) {
ELogs++;
mErrorLogs.add(logs);
}
public void addILogs(String logs) {
ILogs++;
mInfoLogs.add(logs);
}
public void execute() {
if (DLogs > 0) {
for (int i = 0 ; i < DLogs;i++) {
Log.d(getTAG_NAME(),mDebugLogs.get(i));
}
}
if (ELogs > 0) {
for (int i = 0 ; i < ELogs;i++) {
Log.e(getTAG_NAME(),mErrorLogs.get(i));
}
}
if (ILogs > 0) {
for (int i = 0 ; i < ILogs;i++) {
Log.i(getTAG_NAME(),mInfoLogs.get(i));
}
}
}
private String getTAG_NAME() {
return TAG_NAME;
}
private void setTAG_NAME(String TAG_NAME) {
this.TAG_NAME = TAG_NAME;
}
}
Make RootInfo Java
Content are below
Code:
/*
* This File is Part of Almas Api
*
* Copyright (c) 2015 Sahid S Almas
*
* This code are licensed under the terms of the Apache License Version 2.0
* You may use this code according to either of these licenses as is most appropriate
* for your project on a case-by-case basis.
*/
package sahidsalmas.api.internel;
import java.io.File;
import java.util.ArrayList;
public class RootInfo {
static Logger mLogger = new Logger("RootInfo");
/**
* Logger used to logs to the android system
*/
public static boolean isRooted() {
Process mProcess = null;
boolean mRoot;
try {
// This is executing on terminal
mProcess = Runtime.getRuntime().exec("su");
mRoot = true;
mLogger.addDLogs("Rooted Phone");
// If the execute successfully then it return to true
} catch (Exception e) {
// if is not successfully then it return to false
mRoot = false;
mLogger.addELogs("Unrooted Phone");
} finally {
if (mProcess != null) {
try {
mProcess.destroy();
} catch (Exception ignored) {
}
}
}
mLogger.execute();
return mRoot;
}
public static boolean isRooted2() {
/*
* This is the another method to know
* that the phone is rooted or not
*/
mLogger.addDLogs("Trying to know that the phone is rooted " +
"or not by another method");
File mFile = new File("/system/bin/su");
File mFile1 = new File("/system/xbin/su");
boolean isRooted = false;
ArrayList<File> mFileList = new ArrayList<>();
mFileList.add(mFile);
mFileList.add(mFile1);
/*
* In the mFileList we added to file
* to arrary to run loop and check does it
* exists or not exists return to the isRooted2();
*/
for (int i = 0 ; i < mFileList.size();i++) {
if (mFileList.get(i).exists()) {
isRooted = true;
mLogger.addDLogs("The phone is rooted");
}
else {
isRooted = false;
mLogger.addELogs("The phone is not rooted");
}
}
mLogger.execute();
return isRooted;
}
}
Make BusyboxInfo Java
Content are below
Code:
/*
* This File is Part of Almas Api
*
* Copyright (c) 2015 Sahid S Almas
*
* This code are licensed under the terms of the Apache License Version 2.0
* You may use this code according to either of these licenses as is most appropriate
* for your project on a case-by-case basis.
*/
package sahidsalmas.api.internel;
import java.io.File;
import java.util.ArrayList;
public class BusyboxInfo {
static Logger mLogger = new Logger("BusyBox");
/**
* Logger used to logs to the android system
*/
public static boolean isBusyBoxAvai() {
Process mProcess = null;
boolean mBusyBox;
try {
// This is executing on terminal
mProcess = Runtime.getRuntime().exec("busybox");
mBusyBox = true;
mLogger.addDLogs("BusyBox found");
// If the execute successfully then it return to true
} catch (Exception e) {
// if is not successfully then it return to false
mBusyBox = false;
mLogger.addELogs("Busybox not found");
} finally {
if (mProcess != null) {
try {
mProcess.destroy();
} catch (Exception ignored) {
}
}
}
mLogger.execute();
return mBusyBox;
}
public static boolean isBusyBoxAvai2() {
/*
* This is the another method to know
* that the phone is rooted or not
*/
mLogger.addDLogs("Trying to know that the phone is busybox " +
"is available or not");
File mFile = new File("/system/bin/buxybox");
File mFile1 = new File("/system/xbin/buxybox");
boolean Bu = false;
ArrayList<File> mFileList = new ArrayList<>();
mFileList.add(mFile);
mFileList.add(mFile1);
/*
* In the mFileList we added to file
* to arrary to run loop and check does it
* exists or not exists return to the isRooted2();
*/
for (int i = 0 ; i < mFileList.size();i++) {
if (mFileList.get(i).exists()) {
Bu = true;
mLogger.addDLogs("BusyBox found");
}
else {
Bu = false;
mLogger.addELogs(" BusyBox not found ");
}
}
mLogger.execute();
return Bu;
}
}
Make DexInfo Java
Content are below
Code:
/*
* This File is Part of Almas Api
*
* Copyright (c) 2015 Sahid S Almas
*
* This code are licensed under the terms of the Apache License Version 2.0
* You may use this code according to either of these licenses as is most appropriate
* for your project on a case-by-case basis.
*/
package sahidsalmas.api.internel;
import java.io.File;
public class DexInfo {
/*
* This Java Only Say that the system apk are odex or deodex
* it does not make system apps to odex or deodex
*/
public static Logger mLogger = new Logger("DexInfo");
public static boolean isDeodex() {
boolean Deodex = false;
mLogger.addDLogs("Trying to know that phone is deodex or not");
File mFileDirec = new File("/system/app/");
File[] AllFiles;
AllFiles = mFileDirec.listFiles();
for (File AllFile : AllFiles) {
if (AllFile.getPath().endsWith(".odex"))
Deodex = false;
else {
Deodex = true;
}
}
if (Deodex) {
mLogger.addDLogs("The system apk are deodex");
}
else {
mLogger.addDLogs("The system apk are not deodex");
}
mLogger.execute();
return Deodex;
}
public static boolean isOdex() {
boolean Odex = false;
mLogger.addDLogs("Trying to know that phone is odex or not");
File mFileDirec = new File("/system/app/");
File[] AllFiles;
AllFiles = mFileDirec.listFiles();
for (File AllFile : AllFiles) {
if (AllFile.getPath().endsWith(".odex")) {
Odex = true;
} else {
Odex = false;
}
}
if (Odex) {
mLogger.addDLogs("The system apk are odex");
}
else {
mLogger.addDLogs("The system apk are not odex");
}
mLogger.execute();
return Odex;
}
}
How to use
In this java all the method are static just you need to call like this
Code:
RootInfo.isRooted();
RootInfo.isRooted2();
BusyboxInfo.isBusyBoxAvai2();
BusyboxInfo.isBusyBoxAvai();
DexInfo.isDeodex();
DexInfo.isOdex();

Database Users

welcome