I have restored my rom from the back up and restore feature, now when I reset the phone I get an "Error locating the shortcut or locating the file name" message..... I can't do anything with it, does anyone know what to do??
Thanks
i figured it out......thanks anyway, i was in a panic for about 5 minutes or so.
Related
So as I was en route to completing a full flash of my Droid X onto Cricket I couldn't get my web working. Two things I hadn't done were my autosh files and my NVRAM from whiterabbit.org I got my NVRAM file from whiterabbit and wrote it to the phone. it wrote. I restarted the phone and everytime it starts it goes to 1x , then up to 3g, then restarts. everytime. Just enough time to allow me to put it into airplane mode so that I can try to fix it. I didn't backup my NVram sadly so if anyone has a backup please send it my direction. It would be greatly appreciated. this is fixable since i can access my phone still.
-Update today-
Not sure if it means anything but i went into QPST and switched my Mobile IP behavior from mob+simp f/back to simple ip only and it and now it doesnt constantly restart i switched it to mobile ip only, same result, but data still isnt working yet. switching back to mob+simp f/back makes it restart it seems.n
Also noticed that when I turn on my wifi and I switch it to simple IP only it still puts me in a reset loop.
furikazashi said:
So as I was en route to completing a full flash of my Droid X onto Cricket I couldn't get my web working. Two things I hadn't done were my autosh files and my NVRAM from whiterabbit.org I got my NVRAM file from whiterabbit and wrote it to the phone. it wrote. I restarted the phone and everytime it starts it goes to 1x , then up to 3g, then restarts. everytime. Just enough time to allow me to put it into airplane mode so that I can try to fix it. I didn't backup my NVram sadly so if anyone has a backup please send it my direction. It would be greatly appreciated. this is fixable since i can access my phone still.
-Update today-
Not sure if it means anything but i went into QPST and switched my Mobile IP behavior from mob+simp f/back to simple ip only and it and now it doesnt constantly restart i switched it to mobile ip only, same result, but data still isnt working yet. switching back to mob+simp f/back makes it restart it seems.n
Also noticed that when I turn on my wifi and I switch it to simple IP only it still puts me in a reset loop.
Click to expand...
Click to collapse
Did you also write the PRL to the phone after writing the NVRAM? Your PRL should be version 49027. mob+simp f/back will need to be enabled.
If you want to start over, you can SBF to .340 or use the maderstcok zip .340 and your DX will be up to date and fully stock.
I've used bootstrap and rom manager to go back to stock before altering web so that isn't an issue anymore. I've stopped trying the nvram. Everytime I enter the proxy info fully inthe phone manually the phone does the 1x 3g then reset loop. Im guessing something is forcing a reset but can't figure it out. I went into test mode once to force 1x only and keep out 3g but alas it still looped. Ideas? Im also installing log cat to see if maybe a log.can tell me why the phone soft resets during the.loop
Sent from my DROIDX using XDA App
Im using prl 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
EDIT: used my backup again after the reboot cycle issue , found out that after i end up using a NVRAM i get the boot loop again...so in other words i unfortunately have to factory reset because i used the NVRAM addon, one thing i noticed was it updated 11 things, not 12. not sure why. moving on..
furikazashi said:
Im using prl 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
EDIT: used my backup again after the reboot cycle issue , found out that after i end up using a NVRAM i get the boot loop again...so in other words i unfortunately have to factory reset because i used the NVRAM addon, one thing i noticed was it updated 11 things, not 12. not sure why. moving on..
Click to expand...
Click to collapse
So you did this in QPST:
-----NV items from http://www.whiterabbit.org/android (you must generate this uniquely for your phone, go to the link enter [email protected] replace x's with your 10 digit phone number, make sure 2.7 is selected and download the file)
----Now go to the Memory tab. Under NV Items click Write. Browse and select
the NV Item file you generated earlier. Once its done it will say 12 NV
Items were successfully written to the phone
-----I used the PRL attached to do the OTA. (CricketEVDO_38515.prl). I had to put .zip at the end to upload it, so just rename it to CricketEVDO_38515.prl.
-----Now go to the Other tab. Under PRL click Write and browse to the destination you saved the attached file.
Let me know if this helps at all.
I sent NV items from the whiterabbit but this time it updated 12 items, not sure why it did 11 the first time. i also updated the prl to 38515 still no internet though, going into pst to see if the mobile ip behavior is the way its supposed to, update in a sec
UPDATE: phone was set to mobile ip only switched back to mob + simp f/back. and VOILA. 4:28am two weeks later and BAM internet and voice I will be writing a tutorial basing what ive learned into a stable 99% success rate for flashing droid x to cricket, ive only seen a handful out there and im sure i can hepl someone the way everyne has assisted me. thank you everyone. also just upgraded to 49027 prl for 3g and works great not enough 1x coverage where i live sadly.
hi,im new to this,so if iv done anything wrong im apoligise,im having some issues with my galaxy s,2 in actual fact,the first being that when i turn on my phone,im getting "com.android.phone has stopped unexpectedly" i have no idea what this means but its quiet annoying,problem 2 lies with my apn settings,i live in ireland and use the meteor network,when i turn off my phone i and then turn it back on again i have to manually key in the apn settings as the phone simply wont save them,this is the most annoying of all,if i dont set them im unable to use the internet or recieve mms messages,im not a computer wizz or anything like it,so simple is best for me, any help would be greatly apreciated,thanks
Hi. Try a factory reset first then learn how to flash your phone (you have a lot of reading to do).
hi thanks for your responce,i have managed to factory reset my phone but as far as flashing it im lost,i got the phone from my sister,(i know now why)but i love it,so if u could guide me in the right directions on how to flash it it would be great,thanks again
I changed my passcode of my DVP but i forgot. Now it take me more than 21000 minutes of waiting. Could somebody help to restore the passcode. I tried to restore my phone but it failed. My version is 7.10.7720
Does anybody help me????
I have a Note-4 T-Mobile variant(N910T), I have been using Xenon HD and then CM 12.1. After a while when I wanted to go back to stock, and when I flashed stock rom back, the phone was really laggy at first and during setup, there was a popup which said that Factory mode is enabled and I have to switch back to User mode before using it and after a few seconds it disappeared, this happens every time i reboot while in Stock Rom. Somehow after a few minutes, I get the WiFi on again but the keyboard gets stuck after a few presses and phone gets real laggy. After the setup I googled the problem and found out something regarding the EFS Folder, so I rooted it once again and installed ES File explorer and went into EFS and found that it was empty. I tried placing a phone call and it went through and I was also able to use LTE, but when I went to about phone to see IMEI, i saw that the IMEI was also correct, I even tried to setup fingerprints, but it kept saying me to reboot as something was wrong with the fingerprint sensor. Now the weird thing here is that when I am in a Non-touchwiz based Custom Rom, I do not find any lag or any of the problems mentioned above. I have tried these things already:
Going to EFS and switching Factory mode on, but as i told EFS folder is empty.
Backing up EFS from the custom and restoring when I'm in Stock(EFS is empty even in Custom too).
If anyone knows how to fix this, could you please help me?
Thanks!
Hi Sir,
I have the exact same issue as you on my Note 4... Did you manage to find a fix for this??
Please let me know..
Thanks
Hello Sir,
I managed to fix it... I used this guide...
http://forum.xda-developers.com/showthread.php?t=2471421
Try it out... Credits goes to Steve Lazarus for that article.
after factory data reset my Samsung note 4 sm-n910f showing international and no sim now on notification bar and if so I insert sim n power on it shows invalid sim
My imei & baseband went missing after installing a rom. Now i have no mobile network
Hello everyone Happy Holidays i know all us get some kind of technical issue now and then and as far as im concern this isnt the first time someone else has a problem identical to mine which is having a missing imei and baseband resulting in my Samsung Galaxy Note 4 T Mobile popping up a message saying "no mobile network" everytime i try to make a call due to me flashing a new rom. So i dont think there will be a problem if anybody who knows enough about this subject answers how they were able to solve this problem they had.
brunorockstar1997 said:
Hello everyone Happy Holidays i know all us get some kind of technical issue now and then and as far as im concern this isnt the first time someone else has a problem identical to mine which is having a missing imei and baseband resulting in my Samsung Galaxy Note 4 T Mobile popping up a message saying "no mobile network" everytime i try to make a call due to me flashing a new rom. So i dont think there will be a problem if anybody who knows enough about this subject answers how they were able to solve this problem they had.
Click to expand...
Click to collapse
Usually a result of corrupted efs folder. You just need to restore this folder from a previous backup and you should be good to go.
You should always, always, always, ALWAYS backup your efs folder no matter what device you have. It's a very improbable thing to happen to get this error, but when it does happen it's a pain to get it back and running without a backup of the efs data.
If you do not have this backed up, the only suggestion would be to take it to a repair center if available.
brunorockstar1997 said:
Hello everyone Happy Holidays i know all us get some kind of technical issue now and then and as far as im concern this isnt the first time someone else has a problem identical to mine which is having a missing imei and baseband resulting in my Samsung Galaxy Note 4 T Mobile popping up a message saying "no mobile network" everytime i try to make a call due to me flashing a new rom. So i dont think there will be a problem if anybody who knows enough about this subject answers how they were able to solve this problem they had.
Click to expand...
Click to collapse
try to flash 6.0.1 stock firmware from odin see if it bring back your baseband&imei back.
Go to settings/about device/ and take a screenshots and upload it maybe i can help to fix
No need to solve that problem anymore
I just installed a new rom called batman rom s8 plus ofr n4 port 7 or something like that and now i have Lte and i can make calls without any problem. Thanks for trying to help anyway
ShaDisNX255 said:
Usually a result of corrupted efs folder. You just need to restore this folder from a previous backup and you should be good to go.
You should always, always, always, ALWAYS backup your efs folder no matter what device you have. It's a very improbable thing to happen to get this error, but when it does happen it's a pain to get it back and running without a backup of the efs data.
If you do not have this backed up, the only suggestion would be to take it to a repair center if available.
Click to expand...
Click to collapse
I really appreciate you being a good fellow and trying to help me out but i already solved the problem my installing a new rom. I did restore my Efs back up with Twrp by the way but that didnt help the only thing left was to use octoplus but i found another way around it ?
Just be careful, I used to own a Galaxy Note 1 and it would temporarly fix my problem just flashing stock, but after a few days it went bad again. I never was able to fix it so I gave it to my little sister as a tablet lol