Related
Hi,
i can't use the BTAudioToogle Tool for my XDA trion.
Someone the same problem ?
or better:
Someone with a solution here ?
Same for me. I have enabled BTaudiotoggle, I can hear the headset (Motorola HS850) go live but the audio either from WM player or TCMP still comes from the speaker and not the headset.
Hope someone comes up with the answer soon.
Rob
Got the same problem. No sound from BT.
Had something similiar to this with my old unit, to fully enable it I would hit the headset button (which now starts up voice command, let it time out, and then play whatever music i wanted to. I would verify that now but i am at work, and don't think they would appreciate the music blaring if i am wrong on this one
When I hit the button on the headset, it starts the Voice Dialer, the audio cuts in for a second or two, then drops back to the device speaker.
It nearly works, hope someone can hack this soon, just whats needed for podcasts and the like. No good for music tho!
Rob
I would also be very interested in a solution to this problem as I used to use BTaudiotoggle to listen to Tomtom commands in the car (normally have the music too loud to hear the commands through the loudspeaker ).
Worked great with my XDA Mini S but doesn't work with my new MDA Vario II and I didn't really want to have to buy stereo headphones, just wanted to be able to use my standard mono bluetooth headset like before.
If there is no way of using this program, are there any other programs that will send all audio to a mono BT Headset?
yep would really like an updated version of BTaudio too so i can listen to some audio books via my mono headset
You should test the trial version of bluemusic from teksoftco.
www.teksoftco.com . It gives ou a full help file on how to use the software and you have 30 sec to test that it working. I know that it works on the devices having TI Omap processors so it should work for all of you guys.
Cheers,
Raul
Just tried it out. It does the same thing that the other sotware does, mainly enable the headset where you can hear a hiss out of it, but still kees playing out of the back speaker.
My experience is a rassah's. All the Bluemusic software appears to do on my Vario II is cause the bluetooth headset to hiss slightly (whilst sound is still blasted out of the phone's speaker).
Also FWIW the teksoftco site doesn't appear to work too well on the PIE browser - defaulting to a no frames version with just a login box as far as I can see.
Needless to say I have uninstalled the software again.
Rufus.
@RufusA and @rassah guys you should check if you don't have the same problem as ulischultz in this thread :
http://forum.xda-developers.com/viewtopic.php?t=61739
We already tested the software with him on his treo device and as you can see in the thread " after pressing the button on the headset, the sound was redirected". This is mentioned in the help section of the software. ( on the universal/exec for example this step is not needed)
@RufusA - thanks for visiting the ppc version of the webpage (which is still under construction) - even though the subject is irelevant in this topic. I will send you a PM when its finished and tell me your opinion then (even though you have to admit that not many companies have a ppc version of their website - not to mention the smaller ones like ours).
If the problem still persists there is an opened thread on the forum :
http://www.teksoftco.com/forum/viewtopic.php?t=162
Please submit all the malfunctionality and we will fix them.
Cheers,
rain
I downloaded the trial too and had the same problem as before unfortunately.
I did get a little further in so much as, if I pressed the call button on my BT Headset as per the instructions, I could get the music/audio transferred to the headset for approx. 5 seconds but then it would revert back to the phones loudspeaker. I couldn't get the 30 seconds that the trial software advertises
Fingers crossed someone will be able to work out a fix for this soon.
Thanks Nicky for the input. As i see the problem of bt headset being disconnected after 5-10 sec is a general one (and unfortunatelly is a problem in the RUU). We are trying to find a workarround with ulischultz but wouldn't want to get to driver level as clearly it will be fixed by HTC in the next RUU release if they don't want this devices smashed to their heads.
I will keep you updated if we find a solution for the interrupt issue.
Regards,
Raul
Solution
I have identified a solution to this which is working nearly perfectly for me. However, if you do use this then using the BT headset to trigger the voice dial/voice command/voice commander will no longer work.
Acquire a copy of of the BTAudioToggle software inc. BTAudioOn.exe
Copy this to a location on the phone.
Using a registry editor amend the following entries from
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = location of BTAudioOn.Exe
e.g. Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
This says for how long (in seconds) the audio will be passed to the headset for before timing out.
This however, will timeout earlier if no audio is coming through. I am not sure what will happen if something like TomTom is running but not speaking for a while. I have not performed timings as yet.
To activate audio through headset, press the main control button of the headset as if answering call/activating voice command etc. To deactivate, just press the button again.
Voice control apps will still work, but must be triggered from the phone itself, but voice will be picked up by the BT headset.
There appear to be some small bugs with this, such as after a phone call, using headset or not, the audio will stop being passed after hangup.
Please let me know if this work for you!
Looks an interesting solution. I've installed BTAudioOn on my storage card, and changed the VoiceCommand Path entry.
However I couldn't find a VoiceCmdDuraion entry under
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
so I've added a new DWord of that name with the value 86400.
Yet this doesn't appear to have made a significant difference i.e. Pressing talk button on Jabra headset produces 10 secs of sound before "timing" out.
Have I made a mistake, or do I need to have something else installed to get this to work?
TIA - Rufus.
I was going to try and make the suggested changes to the registry but I don't know how and am not sure what program I need to do it.
Could someone please let me know what program I need to install to be able to change the registry?
Thanks
Vs1979:
IT REALLY WORKS!!!!!!!!!
I can't tell you how happy I am!!!!
I did it the way you described it. However I also did not have an entry "VoiceCmdDuration" I created the DWORD-entry and it works now!
Great!
Thanks very much for that great solution!
@RufusA
As i gave you the link to the other thread you're not the only user experiencing this. There are several others complaining about this RUU bug.
@Nicky
You need to install a ppc 2005 regeditor (for example Resco Explorer has one built in, or you can find one on buzzdev site).
RufusA said:
Looks an interesting solution. I've installed BTAudioOn on my storage card, and changed the VoiceCommand Path entry.
However I couldn't find a VoiceCmdDuraion entry under
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
so I've added a new DWord of that name with the value 86400.
Yet this doesn't appear to have made a significant difference i.e. Pressing talk button on Jabra headset produces 10 secs of sound before "timing" out.
Have I made a mistake, or do I need to have something else installed to get this to work?
TIA - Rufus.
Click to expand...
Click to collapse
Hi,
Did you Soft reset your device?
I made the registry change only, have not installed BTAudioOn and all my Voice command Audio etc... now comes through the headset and does not time out after a few seconds. I did find though that decreasing this value to lets say 60, would actually time the audio feed out even if not in use so I have stuck in a huge figure, will still need to do more testing to see if drains the battery any quicker and see if I can find another stirng which will do more for me.
Hi,
it work not for me
i have changed the path to \xx\BTAudioOn.EXE
i have add the VoiceDuration = 86400 (DWord DEC)
but it is the same problem, after 2 seconds the sound goes back to PPC.
I want to buy this headset but I have some doubts about it and I thought you may help. (I have HTC Universal)
1. Does this headset really show the CONTACT'S NAME on display or just the phone number? If so, can I upgrade ROM or install patch to make it show NAME? I use Pocket Informant, if it matters...
2. Does the remote really work? With all player's software (usually use TCPMP). With my laptop on standby and closed (screen faced inside) can I simply make it start playing and foward etc??
3. Can I see the song's info on display? Like artist, song's name and all?
4. As a simple headset (on car use), is it good enough? easy of use, good sound quality on recieving and mic good quality on talking? Or is it just like "Speeker on" effect on Universal that I have to have my mouth gludded on display to talk and other person listen clearly (laptop mode)?
5. As a headset (for music and movies purpouse) is it good quality sound (better than original HTC headphones/headset that came with Universal (wired ones)?
6. I've heard there was a problem reconnecting headset stereo after a call (recieving I think). I've also heard that had o reconnect on settings... Is it true? Happens with all PPCs and all Stereo BT headsets? Or just with some brands/models? If this happens, I dont know if its worth the money, since I recieve calls a lot (would be boring to restore settings or resets...).
Can be fixed with upgrade of ROM or patch (If there is this problem with Univ).
7. Is it worth to trade a normal BT headset (jabra b250v) and stereo headset (wired that came with Uni) for this one??? It's kinda expensive... Will I be pleased or its just problems... wireless stuff??
8. how do I know if my ROM has AD2P and AVRCP. If no, how do I upgrade to it?
Please help me decide if its worth the buy!
Thanks
Deiota
RE
Hi!
I'm using the SE HBH-DS970 bluetooth headset with QTEK 9000 aka Universal
1 - It shows contact names provided you've JETware Hands-free Extension installed otherwise you only have contact numbers on display
http://www.jetwaremobile.com/index.htm
2 - The remote works very well with Conduits Pocket Player v2.8's AVRCP
http://www.conduits.com/products/player/
3 - Didn't notice it can
4 - Not sure use in car (I don't drive) but it works well when use for talking
5 - Sound quality fairs vey well and its slightly strong on the bass side and not too strong on treble (comparing to BLUETAKE iPhono mini 450Rx). Did not try with Universal's wired headset
6 - This issue applies to many headsets too. Only way out is to exit the music program and re-start it and everything will be fine
7 - Why have 2 when you can have 1 integradted one?
8 - So far only the latest Universal, QTEK 9000, ROM has built-in A2DP and AVRCP.
Hope it helps
RE
Bro,
Your QTEK 9000 ROM
QTEK 9000 (Universal)
ROM Version: 1.30.77 WWE
Radio version: 1.09.00
ExtROM version: 1.30.176 WWE
has built-in A2DP and AVRCP
RE
Oh...and ,btw, add to your registry to have an improved A2DP performance with less stuttering/lag etc
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Add "Priority256 "=dword:60 (Use Dword Value)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway\Capability
Change Dword value to 69 (default is 37)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\BitPool
Change Dword value to 40 (default is 30, recommended by other forumer is 60)
Re: RE
FOSA said:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway\Capability
Change Dword value to 69 (default is 37)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\BitPool
Change Dword value to 40 (default is 30, recommended by other forumer is 60)
Click to expand...
Click to collapse
maybe i'm blind but i never find these two in the QTEK rom registry
RE
Sorry, what I meant was
change the Capability Dword value in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway\
to 77 (default is 37)
and the Bitpool Dword value in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\
to 40 (default is 30, recommended by other forumer is 60)
All change values are in Decimal :lol:
Re: RE
FOSA said:
and the Bitpool Dword value in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\
to 40 (default is 30, recommended by other forumer is 60)
Click to expand...
Click to collapse
Strange, I do not have the registry entry "Settings\". After "A2DP\", all I have is "Device1\", "Device2\" "Device3\", "Device4\".
I am using the tornado patch (not the Qtek ROM).
Anyway, I am using this Sony Ericsson headset:
- If I am playing music and a call comes in, the headset does not pick-up the music after the call. I have to shut everything down, and refresh the services of the headset.
- Usable range for stereo music is about 10-20 centimeters. So, if the Universal is on my belt, then the headset receives the music okay. Any further, and the headset does not receive the music. In other words, in my experience, the wired headset that came with the universal has longer range!!!
- The music title and contact names do not appear on the headset screen, but then I am not using JETware Hands-free Extension at the moment.
@FOSA: How is your experience, especially concerning:
- bt range (for music)?
- Resuming music after a call?
- I understand you are using the Qtek ROM (not the tornado patch)?
RE
Sorry, missed out one other important registry entry for smooth A2DP, here:-
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Add "Priority256 "=dword:60 (Use Dword Value)
Note :- All in there're 4 registry entries
RE
Hi BillB
Quote
"How is your experience, especially concerning:
- bt range (for music)?
- Resuming music after a call?
- I understand you are using the Qtek ROM (not the tornado patch)?"
- 5m of open space is not an issue
- Not possible to resume music after a call, however, I just exit Conduits Pocket Player v2.8 and re-start the player again and everything (including AVRCP cotrols) work fine. NO need to soft reset and re-pairing. My AVRCP controls even work with my QTEK 9000's lid closed. All these made possible with Concuits Pocket Player v2.8
- Yes, I'm using the QTEK 9000 with latest A2DP ROM + the 4 regsitry entries mentioned above for smooth music
Thanks for the info.
I will have to try Conduits Pocket player, and maybe even upgrade my JasJar to the Qtek ROM (I am guessing that i-mate will not release any new official ROM updates for JasJar).
Re: RE
BillB said:
FOSA said:
and the Bitpool Dword value in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\
to 40 (default is 30, recommended by other forumer is 60)
Click to expand...
Click to collapse
Strange, I do not have the registry entry "Settings\". After "A2DP\", all I have is "Device1\", "Device2\" "Device3\", "Device4\".
I am using the tornado patch (not the Qtek ROM).
Click to expand...
Click to collapse
i have the QTEK ROM with Device1-4 and none of the other settings that FOSA and other's speak of. just the opposite. which is which??
RE
Sorry all,
Only 3 entries needed
Hi skywriter,
The 3 registry entries are added using an improved A2DP patch available on this forum - can't remember where. However, if you know how to add these entries then there's no need for the said patch.
You can have different values after trying them out and get the minimum stutter/lag/hiss etc on your set
See the attached pictures
:lol:
RE
Sorry, one of the pictures was synching while its being snapped, here:-
Where to buy
Hello!
I want to know where is the best place to buy this headset (in Europe).
Thanks
Deiota
I don't know if this place is the "best", but I bought mine from this online store in Spain with very fast service/delivery:
http://www.bluezona.com/index.php?o...18&PHPSESSID=9b2d60858e02b1e75bc53faace6b690f
They have several other models available too.
FOSA,
You seem to know your DS 970 pretty well. I have the same model and I love it I must say. I am not experiencing any hiss or reception problems except when my 9000 is in a case where the magnet is messing around with it in general.
However... I have the following issues:
- Turn BT on 9000 on
- Turn DS 970 on
Although Wireless Stereo Option in the pairing is unchecked the phone streams all sound to the headset. I have to go in and check/save and uncheck/save to disable wireless stereo.
Also I cannot get Caller ID to work correctly with the Jetware. I emailed them and sent them a log and they determined that the headset is using extra commands which is what is causing the problem. Probably will be fixed in a future release but for now, it doesn't work.
Mind you, I have tested thoroughly and did go to the trouble to backu and hard reset. Both problems persist after hard reset with only one number in contacts for test purposes.
Any ideas? (the wireless stereo bit it killing me..)
Other than that I have to say, it's extremely well behaved, stylish, handy and reliable.
Joanna
Correction: I tried the new beta of Jetware and it works fine (so far) with the CallerID checked in the Advanced Options.
RE
Quote
"However... I have the following issues:
- Turn BT on 9000 on
- Turn DS 970 on
Although Wireless Stereo Option in the pairing is unchecked the phone streams all sound to the headset. I have to go in and check/save and uncheck/save to disable wireless stereo. "
I don't have this problem. Once paired my QTEK 9000 auto detects my HBH-DS970 the next time when I turned both on and 'Handsfree' and 'Wireless Stereo' options are always checked
RE
Aaaaaaa.............its not relaible
I uninstall and re-install JETware and now its not displaying name caller id
:roll:
FOSA my problem is not whether it's checked or not. I have chosen to uncheck the wireless stereo and use it only as a headset when I drive. It completely ignores the UNchecked wireless setting and still streams all sound (including incoming call ringtone) to the DS970 even though it shouldn't. Setting is unchecked and the minute I turn on the headset it acts as a wireless stereo. Have you tried this at all?
I have not tried uninstalling but 2 days later the beta still works. I have two more questions for you, well one really:
1. Does it scroll the whole name of the contact? Mine shows the number and then the name but not the whole name (which in Greece could be miles long). Just the first 10 characters. On the HBH660 I know it scrolls the name. I am not sure if this is a limitation of the headset or the software.
2. Uninstall and remove the settings from the registry. It leaves the settings behind in HKLM/Software/Jetware. Trying installing then and see what happens. I use the beta which will be released with the next week or so (or so they said).
Joanna
Re: RE
FOSA said:
Hi skywriter,
The 3 registry entries are added using an improved A2DP patch available on this forum - can't remember where. However, if you know how to add these entries then there's no need for the said patch.
Click to expand...
Click to collapse
thanks FOSA! i knew they came from somewhere... but i didn't know where. if i can just create them by hand that works too!
I have an Hermes from O2 Germany running perfecly on the Cingular Network
ROM 1.23.707.1
ROM date 6/28/06
Radio 1.06.00.10
OS 5.1.195
Build 14955.2.3.0
Blue Music is an audi channel switcher that sends all audio info to a mono BT headset that is usualy only used for phone applications.
http://teksoftco.com/
I loaded and registred the Blue Music audio channel switch as the VJVolubilis that was working perfectly on my 8125 did not worked at all on the Hermes
The non registred version gives 30s of music only and then reverts to the speaker.
I get a very strange behavior as my registred version gives me 2mn precisely of music and then reverts to the speaker...
I contacted Teksoftco and got nice email exhanges, but not much result yet.
They are due to send a debugger to me in the comming days to check what is going on.
Any idea from the group experts?
Thanks
Eric
Ok, I found the solution
There is a registery that limits VoiceCommand to 120s
I have modified the registery with 9999.
I have now 3 hours almost of listening without issues
The registery is
HKLM\Software\OEM\VoiceCommand\VoiceCommandDuration
The default value is 120s...
Eric
Th HD2 is my 4th WM phone on all my previous WM Phones I ran a mortscript which I wrote to transfer all the system sounds over to my bluetooth car kit when it detected the kit...the script looked for the change in a registry key:-
> HKLM\System\State\Hardware\Handsfree
and then activated the BTAudioOn program...
Now this just does not work on the HD2! neither the registry change nor the Audio transfer - the sound still comes out of the phone speaker!!
I have read that a different Bluetooth stack is used on the HD2 (Widcomm)..
So does anyone know:-
1] Which registry key changes when a handsfree kit is detected?
2] A program that will transfer the sound to the Bluetooth device on the HD2?
Thanks...
Which ROM are you running ? On my NRG ROM which is a 1.66 based one i have the option in the BT settings under advanced to play system sounds on remote hands free device .
Comm Manager -> BT -> Settings -> Advanced -> Audio
Never checked on a pre 1.66 ROM if this option existed ..
I have a stock O2 version with 1.43 ROM, yes I found that option and turned it on but it doesn't work! I read somewhere that it only works for stereo devices? But def not working on mine :-(
anyone???????????????
dino_Donis said:
anyone???????????????
Click to expand...
Click to collapse
Works fine for me on my Jawbone 2 BT headset .. I can listen to music over it no probs (albeit poor quality) .. Maybe upgrade to a 1.66 rom and see how you go with that..
Is it safe to upgrade a stock O2 HD2 to this version? What else will I gain? Is sense much different?
Can someone confirm that this Bluetooth issue will be fixed if I upgrade my ROM to 1.66 WWE. I have an o2 phone which currently has 1.43 on it.
When the phone rings the sounds gets re-directed to my Plantronics M3000 headset/Nokia CK-7W car kit fine...but the Play all system Sounds through Bluetooth device feature doesn't work...I can hear extra hiss through the bluetooth device like it is switching on but the sound still comes out of the phone speaker....
Hi
I have been running "[ROM] Clean ROM - Stock UI - RTM 8858 Base - Leo: HD2 - 7.8 Official" on my HD2 for a couple of weeks now and have found an issue while using my Blueant Bluetooth car kit.
When my phone is connected to it and I receive an SMS or Email the phone will reboot. It is fine when I'm not connected to the BT handsfree. I think it is because the sounds are set to go through the BT handsfree speaker instead of the phone speaker. I cannot find a setting to change this in WP7 like you can with android. If I could change this I think it will fix the problem. I don't want the sounds to go through the BT handsfree anyway.
Anyone know where this setting would be in the registry?
Thanks
Cluffy.
PS I tried to ask this question in the actual ROM thread but it wouldn't let me as I have posted less than 10 messages.