Please help if you can this is my first post on the site I had a look to see if anyone ells has had the same problem but did not se anything I understood to be the same.
I have been offered a XDA that has these symptoms and have decided it’s best to ask the pros before parting with £120.00 of my hard earned cash.
The information given to me is this:
“I decided to upgrade the ROM It all seemed to be going well then it just stopped loading and now the XDA wont do anything and the screen just says “UPGRADING IT WILL TAKE ABOUT 5 MINUTES” WARNING NOT TO REMOVE CONNECTIONS”
I will do my best to get additional information if required
Thanks for the time.
WOP
This is a typical situation of a failed ROM update ...
Can you get the bootloader screen (power + soft reset) ? and what version you read (5.15 , 5.17, 6.22 .... etc)
If you can get the bootloader screen with "GSM Ok", the chances are high that you can get this XDA working again using SD flashing method.
Try to get back with more info.
It is probably a good xda. All you probably need is an sd card and this forum. But meanwhile press the guy a little more. 100 will not be such a bad idea.
is £120.00 for an XDA good if it works?
I have emailed the chap with the request and am awaiting a reply from him :?:
I will also try and get the extra £20 off thanks for the hint :lol:
But let me make sure I have this write can you damaged hardware on these items when playing around with the software:?:
Or can you simply just reinstall all the software and drivers like a PC :?:
wop said:
But let me make sure I have this write can you damaged hardware on these items when playing around with the software:?:
Or can you simply just reinstall all the software and drivers like a PC
Click to expand...
Click to collapse
The answer is YES!! ... you can read many stories here about people ended up with a nice $200 worthy paper weight!!! ... but being carful it can be a joyful experience
This is the latest saga to this story
I am officially a real member now as I have paid out my £120.00 for this xda and now the fun really begins
Because I have no idea how to fix it
I was asked to check if it did certain things and the answer to that question is yes the information I have is this bootloader page displays GSM OK
And we have V5.15 installed I hope this means something to someone out there in the XDA world.
If you would like to help me be gentile as I am still virginal when it comes to these things but I have some PC experience and am willing to make an ass of myself
Please do not lead me in the wrong direction as Biso007 says you can read many stories here about people ended up with a nice $200 worthy paper weight!!! And that’s not good
Get yourself an sd memory card and a memory card reader writer, download xdatools, go look at www.yorch.net or http://lumpistefan.dyndns.org/ have a good look around the site before trying anything. I was going to buy that xda but he stipulated "no returns" so I gave it a miss, I think it will probably be ok but I was a bit puzzled as to why the guy didnt fix it himself.
How when why and where
These are the questions I will problem be asking for a while I have received the item and in its normal mode it has lines all over the screen with two rectangular boxes going long ways across the screed these are clear.
I have done a hard reset and have it shows this wallaby bootloader v5.15 on a white red green and blue screen at the bottom left hand side it has GSM OK when you hit the action key it runs some tests I collated this information most thing got the thumbs up but some did not SIR RX error and RTS-CTS err come up and froze the system.
Can this one be fixed or do I have a door stop.
If it cam be fixed Can I download the XDAtools on this site?
If you pass your mouse over this link xdatools you will get a box pop up, scroll down and click on download, use the sd flash method and good luck.
can i :?:
Hi cruisin thru
Thanks for the directions you have pointed me in found the tools and have down loaded them.
As I have a working XDA and an sd card available to me buy no card reader/writer available at the moment is it possible to download the correct files from a working XDA to one that is not working via an sd card or the cradle or some form of direct link?
regards[/b]
Yes. You can dump the rom from a living XDA to an SD card via the bootloader. However there is a caveat. The living XDA may suffer a hard reset, so you must ensure a full back up. Put your SD card, preferably 64mb into the living XDA, go into the bootloader and when you get GSM OK hit the upper left button (Calendar Button) and select CE Rom to SD. Leave the system until it is completed. Then pop your SD into the dead XDA and enter the bootloader the usual way. If your card is okay, the rom should be recognised and you will be prompted to download rom. Follow the instructions, the rest is easy. Good luck.
back in a tick
Sorry I have not got back to you in a bit I was waiting for my sd card to arrive from the USA.
I think I got quite a good deal just over £40 including P&P for a 256 what do you think?
I will try what you mentioned in the last post and once I’m done I will let you guys know how it went.
Any last minute advice from the professionals out there?
O my god
What can I say I now have 2 working XDA’S with loads of memory that will let me put any sim card in and I
thank all those that helped me to solve this problem and those that set up this fables site well done to you all
I have one more question to ask?
:twisted: WHAT CAN I TRY NEXT :twisted:
Related
hey people....
i was just upgradeing the radio stack to v.4.21 beacuse mine was v.4.20 and as i was installing it on the xda, it said "Upgrade failes" and crashed. I then tried a soft and hard reset and it just crashes again.
Can some one PLEASE help me...
Thank you so much
jay
Apart from a sof and hard reset, what else have you tried to resolve the problem?
nothing
i dont know how.....i have had the XDA for 1 day
any advice i would be VERY greatfull....
even if u think it may not work.
thank you so much
jay
well looks like you may well have a dead one day old xda on your hands there jay
no dont say that....
its not dead.....its just sleeping (hopefully)
please help any body...*does a jig to get people to help* lol
jay
THE PROPHETOR! said:
"it said "Upgrade fails" and crashed. I then tried a soft and hard reset and it just crashes again."
Can some one PLEASE help me...
Click to expand...
Click to collapse
Crashed!!!!
What is being displayed on the screen?
Are you able to use your XDA at all?
Will it still connect to your PC via ActiveSync?
the answer to all those questions is no....
no activesync
no using the xda
the only thing that is being displayed is the startup o2 sign and in the left hand bottom corner it says
g
r
s 31.85834 (or some number)
and then it goes to a blank white page.....
it keeps swapping back and forth from these two pages
thanks
jay
Are you able to get into the bootloader?
press and hold to on/off button while soft-resetting.
Do you have a SD card reader?
Also, where did you get the xda from, just incase!?!
im gonna try the bootloader thing....but what do i do if it works (im waiting for it to charge up abit before i do that) although i dont think it is charging
i dont have a sd card yet....
o2 online....i have insurance, i think (hope) they will change it....but im going away tommorow for 4 weeks....and im stuck without a phone...so i wanted to know if there was a way that i could reinstall it again...
thanks again york for your help
jay
hey yeah i can get to bootloader
wallaby bootloader v5.22
what do i do?
it siad there is a gsm erorr?
thanks
jay
Right, well it's a start, unfortunatly without an SD card reader there is nothing that I know that will fix this problem, as you cannot use Activesync without the os loading.
I've had a quick look around the forums but all related articles on fixes suggest the need for a card reader.
When you did the upgrade, did you remember to remove the power supply first?.
It seems that leaving the power supply attached while upgrading the radio causes an internal configuration error.
If no one else here can help with your problem, you will have to send it back to O2, they will replace it for new, however, if they do kick up a fuss, remind them of the Sale of Goods Act (Amendment) 2003.
Sorry, that's about as much as I can do mate. Good luck, and don't be but off the xda by this problem, I got mine of ebay and broke the screen within a week, had to fork out another £130 for a new screen, but I'm very glad I did.
ok thanks york......
i will give o2 a call.....
thanks
jay
THE PROPHETOR! said:
hey yeah i can get to bootloader
wallaby bootloader v5.22
what do i do?
it siad there is a gsm erorr?
thanks
jay
Click to expand...
Click to collapse
Great now press the Calender button, that should put you in the GSM
bootloader mode. From there run some of the options ect.., try changing your band to 900 and see if that helps also try turning the radio off as that might let your XDA bootup.
hi....i tried that and it kep saying....
gsm turn ON fail!!
any more ideas?
thanks
you all have proberbly heard this problem before but i am new to the xda scene i recently tried to upgrade my radio stack from o2 and it crashed halfway thru now my xda has a gsm error on the bootup menu 5.15 when it turns on i get the windows screen(the one with the field) but the stylus wont work because the screen isnt configured i have a 256meg memory card
please help!!!!!!
Sorry for that Dranny, many people has the same problem, it seems the way out depends on which part of your system files were damaged, some people managed to solve it by removing the battery and re-installing it after a while, some found the battery fuse damaged, some also (as in this thread http://forum.xda-developers.com/viewtopic.php?t=4123 ) managed to repair it. The rest of us, didn't succeed yet. Hope you have a better luck than some of us.
There is also a Canadian member here who says he can Flash the device, I think he does it for a fee, well, it is his right of course, but for me, I'm taking it as a challenge. I don't need my damaged XDA, so to me it is only to learn how to do it.It also seems that service centers can flash it for you.
Best of luck mate. please if you had luck with it, post it as this will give more hope to the rest of us.
i phoned o2 today and luckily its still under warranty
thanks for your comments
Ok first of all a big hi to this great community (xda team) and users.
Im new to this stuff but im in need for a little help, and i hope someone is willing to help me.
I have HTC Touch and im having problems with it. Its broken now it doesn't work. Not to forget to mention the phone i own is chinese made, which means i think is not the original one (even it looks and acts like the real one).
After modifying some phone applications, by installing tweaks and applications i found on internet, i installed some modified Keypad application, and after using it a while, one day it stopped responding and instead of showing Number keys, it only showed black buttons. SO i tried to uninstall it and after successful uninstall i restarted the phone but it showed me the screen aligning thing and i did what was required it booted but was not working properly. so i did several reboots, and then even tried reseting it. after several tries im now stuck on screen error.
I uploaded two videos on youtube how the screen gets mixed and the other problem, hard reset won't work on my device.
Links to videos:
video 1:
http://www.youtube.com/watch?v=ivS0tALyvd0
video 2:
http://www.youtube.com/watch?v=t0DyOiw7Pkw
i would be very happy if anyone could tell me what to do with my device.
PS. Im newbie so i might need some simple instructions if possible.
Thanks in advance.
No one cant help???
I hope someone is willing to give me some instructions...please!!!
Best regards. Gjizaqin
Very strange.
I havent seen any so unhelpfull forum like this :-( im really sad.
I posted the thread asked for help, explained the thing in the best way i could, and no single reply even the one "we can't help" would be nice to see.
Update to my post:
Im writing this with idea of helping others and pointing people to right direction. After maby 1 month of hard exploring i repaired my htc touch (chinese clone)
The phone im using is also known as Elf0100.
So how i fixed the problem:
After trying many many times the standard Hard reset method (Send, stop keys pressed and presing soft reset button with stylus) this method doesn't work with chinese htc clones. So anyone out there having Chinese Htc clone, the right method for doing Hard Reset is: Hold Volume Up & Camera Key pressed, and press Reset button for about 3 seconds without releasing Volume up and camera buttons. After that you should get blue screen, and in the top screen will be shown "Boot loading, hard reset, or something like that im not very sure".
Anyways if you have your Windows mobile damaged (like the one i had), you can repair it with the following method:
1. Download the manufactured version of Windows (or maby this is called ROM) from this site.
2. Format your HTC memory card (Micro SD card), so it will be clean.
3. Move the update.img (you already downloaded from the site) to root directory of your Memory card.
4. Press Volume Up button on your htc and while keeping it pressed , press the reset button.
You should get the blue screen telling the update being downloaded. Wait for a while and it will tell that Update is successfull and your phone will be rebooted.
THis is it.
Although i didnt get any help from this forum, i know i might help others cause this is most frequent place regarding PPC.
Best regards to all.
gjizaqin said:
Update to my post:
Im writing this with idea of helping others and pointing people to right direction. After maby 1 month of hard exploring i repaired my htc touch (chinese clone)
The phone im using is also known as Elf0100.
So how i fixed the problem:
After trying many many times the standard Hard reset method (Send, stop keys pressed and presing soft reset button with stylus) this method doesn't work with chinese htc clones. So anyone out there having Chinese Htc clone, the right method for doing Hard Reset is: Hold Volume Up & Camera Key pressed, and press Reset button for about 3 seconds without releasing Volume up and camera buttons. After that you should get blue screen, and in the top screen will be shown "Boot loading, hard reset, or something like that im not very sure".
Anyways if you have your Windows mobile damaged (like the one i had), you can repair it with the following method:
1. Download the manufactured version of Windows (or maby this is called ROM) from this site.
2. Format your HTC memory card (Micro SD card), so it will be clean.
3. Move the update.img (you already downloaded from the site) to root directory of your Memory card.
4. Press Volume Up button on your htc and while keeping it pressed , press the reset button.
You should get the blue screen telling the update being downloaded. Wait for a while and it will tell that Update is successfull and your phone will be rebooted.
THis is it.
Although i didnt get any help from this forum, i know i might help others cause this is most frequent place regarding PPC.
Best regards to all.
Click to expand...
Click to collapse
Hi gjizaqin,
I feel sorry you lost valuable time looking for an answer to your problem (and found it alone !) but I think you are too hasty to blame this forum. I am myself quite new here and I've already learnt so much using the "search". For instance I found another remark of yours in another thread and also found this http://forum.xda-developers.com/showthread.php?p=2466074#post2466074 where you have your answer
Another reason is the title of your thread Help needed , HTC Touch screen error! like me probably others understood you have a technical problem with your screen (broken or damaged) and nobody could help you but repair shop...
I trust you'll continue contributing here because your last post proves you're a gentleman.
All the best !!!
tito12 said:
Hi gjizaqin,
I feel sorry you lost valuable time looking for an answer to your problem (and found it alone !) but I think you are too hasty to blame this forum. I am myself quite new here and I've already learnt so much using the "search". For instance I found another remark of yours in another thread and also found this http://forum.xda-developers.com/showthread.php?p=2466074#post2466074 where you have your answer
Another reason is the title of your thread Help needed , HTC Touch screen error! like me probably others understood you have a technical problem with your screen (broken or damaged) and nobody could help you but repair shop...
I trust you'll continue contributing here because your last post proves you're a gentleman.
All the best !!!
Click to expand...
Click to collapse
Thanks for your reply tito12,
Anyways its nice forum but not very newbie frendly. I guess the way I wrote this thing will be much easier for any newbie to fix his china htc, without talking too much about roms, loaders etc etc, wich is very confusing for newbies (like me and others).
I thought it was screen problem cause my htc was getting some messy colors while loading (you can see it in the video i provided). And i stated "unhellpfull forum" by keeping in mind that more than 200 people viewed the thread, and not even single one said simply : "i have no idea, or sorry" so i know someone will try to help me out.
Anyways as a owner of HTC I will still contribute to this forum, in the way I can but words I wrote could be some kind of newbie impressions.
Best regards to all.
Sorry to see no one could help you out - maybe its because its a clone and most users here have real genuine ones? Anyway its great to see you got it fixed and stick with the forums as I am sure you will learn a lot from them and soemtimes get an answer. I find that hardware questions dont get many responses but if you go into say a skinning forum you will get more replies.
Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
kryogenik said:
Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
Click to expand...
Click to collapse
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
orb3000 said:
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
Click to expand...
Click to collapse
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
kryogenik said:
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
Click to expand...
Click to collapse
Well hope you can solve the issue!
Good to hear that you have a new Uni!!
May I know where you´ve got that great deal? and if possible I would like to buy one!
For flashing instructions read here: http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
And personally I recommend you Tomal v.8.5 the fastes and stable 6.1!
Good luck!
Hi again.
It was a UK eBay "Buy It Now" offer.
I was browsing Uni/Exec/SPV etc and refreshing waiting for a particular auction to end when this one just popped up with charger, new battery, leather case and 3 x stylus. It looks/smells brand new. Incredibly lucky I know.
Thanks for the advice on the ROM. I'm just reading through where/how/why and whatnot now. I have a G3 device so I think I can just go ahead and flash.
But as I say, I'm reaqding through the Wiki and the threads. I have seen others mention Tomal's ROM. I'm looking for as Vanilla as possible. This unit for me will ideally run TCMP as best as it can and Vijay's FullScreen along with terminal services. Everything else is a very distinct second priority. I have a Wizard I use for TomTom and a Nokia N95 for an everyday phone. This just needs to be a media player and a remote access unit for my desktop machine. Apart from a file explorer, I could pretty much do without everything else.
Thanks again.
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
kryogenik said:
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Click to expand...
Click to collapse
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Cheers,
Auzman said:
I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Click to expand...
Click to collapse
Exactly. There are some very odd ideas about what a tutorial is.
I'm hardly a newbie myself, but when there's something so valuable at risk it obviously makes sense for things to be right? Why bother otherwise.
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
Click to expand...
Click to collapse
Well, I've got the extended ROM showing. I can understand that needing to be done - perhaps the new ROM needs it writable. I can't for the life of me imagine why the unit needs to be SIM unlocked though?? I have seen posts from people who have SIM unlocked AFTER a ROM flash so I'm thinking perhaps this isn't the case?
Did you do either of these? Or maybe your unit was already in this state?
orb3000 said:
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Click to expand...
Click to collapse
Thanks Orb. But it's not a request. I have a feeling it wouldn't be acted upon anyway. I can't be the first to point out inconsistencies.
I run a website and Vbulletin forum too. The day I have to rely on someone else to tell me it's not right is the day I give it up.
It sounds like I'm bashing XDAD. I'm really not. It's been a lifeline for me numerous times (the forum I must stress, not the WIKI).
I'm just surprised that such a fantastic resource is being let down by the one thing it should be proud of.
Auzman said:
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
Click to expand...
Click to collapse
I also was a newbie sometime, and I found that if everybody gives me easyly all my questions and problems I will not learn never! and I will get used to demand that people has to give me the answer right away!
So no my friend, I understand is not an attack and I´m also friendly:
But said that I´ll push newbies to do it by themselves, even if it´s a little bit more difficult
At the end they as me wil apreciate it, because we learn to SEARCH and READ
lol.
Cute idea but there's a big difference between encouraging someone to help themselves and pointing them to articles that do the exact opposite to what they're supposed to do (i.e. confuse rather than assist).
Everyone needs to start somewhere, but you NEED to have at least some correct and up to date information to send you on your way.
You wouldn't give someone a manual for a 1972 Ford and tell them to read it so they can fix their 2009 model.
Anyway, that's my opinion on it. I hope one day someone has time to add missing bits to the Wiki. I appreciate it could be a major task. As I said, essentially this will save on hundreds of people posting the same problems over and over again and people getting sick of replying to the same posts over and over again.
It's simple common sense.
OUT
Agree mate
I´ll try to find out how we can update the Wiki
Have a good day
Hello,
I recently bought a HTC HD 2 Tmobile from ebay .
The phone will not boot up.
When i start up the phone it leads me to the windows start up to the tmobile start up then back to the windows start up and stays there and i cannot do anything except take out the battery.
Any ideas? Thanks in advance.
Sounds like you are stuck in a boot loop. There is a few things you can try.
First check the battery pins and make sure you do not have any that are bent out of alignment with the others or that is being hindered in anyway.
Next you can download the official Windows Mobile ROM from T-Mobile. You will have to enter the IMEI number, look under the battery for it. Once downloaded you can try to flash it via USB. Just put your HD2 into the bootloader by holding down the volume down button while powering on your HD2 and then connect it to your computer via USB cable. You will have to have Windows Mobile Device Center or Active Sync installed on your computer so you can get the USB Sync connection you need. Go to here to find a link to both, just choose the one you need for the type of windows you use. Anyway once you have your HD2 in bootloader and connected the serial in the bottom white bar of bootloader should change to USB, this means you have the USB Sync connection. When you see the USB you can right click on the ROM you downloaded from T-Mobile and run it as administrator. I do suggest you let your HD2 stay off and charge for a little while first though to make sure you have more than a 50% charge.
If that does not work you can try running a Task 29 and then repeating the above mentioned steps to flash the ROM again.
If this does not fix your problem you probably have hardware issues causing the boot loop.
Thank you so much for the reply. I will try the things you have listed. Even though i am a bit lost haha. If these steps dont work , what are some of the hardware issues that may be the cause of this? And i know this is random but can you help me load android onto my hd2? I have 2 2gb micro sd cards do i have to get a bigger card? Which android os would you recommend? Thats quick and smooth? Thx!
H0n3yb43 said:
Thank you so much for the reply. I will try the things you have listed. Even though i am a bit lost haha. If these steps dont work , what are some of the hardware issues that may be the cause of this? And i know this is random but can you help me load android onto my hd2? I have 2 2gb micro sd cards do i have to get a bigger card? Which android os would you recommend? Thats quick and smooth? Thx!
Click to expand...
Click to collapse
the hardware issue would be overheating cpu, have to get a new main board via HTC warranty (if it is not voided due to water damage or dropped).
Android is easy to load. Fast/smooth you want a CyanogenMod7 ROM, you can find versions for SD or versions that you flash on the phone itself. You can either run Windows Mobile 6.5 then laucnch Android from SD (dual-boot), launch Android from SD with no Windows Mobile, launch Android flashed from internal storage, or flash Windows Phone 7 to internal storage and run Android from SD (dual-boot).
The tutorials are all in the HD2 Android forums and HD2 WP7 forums.
initially I would try a hard reset before getting too technical.
hold down volume up and down and switch on. keep holding volume buttons, when prompted press volume up. this will restore to out of he box settings ie remove all previous data on the phone.
G
H0n3yb43 said:
Thank you so much for the reply. I will try the things you have listed. Even though i am a bit lost haha. If these steps dont work , what are some of the hardware issues that may be the cause of this? And i know this is random but can you help me load android onto my hd2? I have 2 2gb micro sd cards do i have to get a bigger card? Which android os would you recommend? Thats quick and smooth? Thx!
Click to expand...
Click to collapse
As far as hardware issues go it is like XDA member orangekid said overheating is the predominant reason that comes to mind. Another thing is degraded prossesor connection or degradated flash/NAND chip connections. All of witch can only be fixed by main board replacement.
Yes I can help you "load" Android onto your HD2, just click the guide link ed in my Sig. I think everything you need to know is there. well except how to run Android fro SD card, hmmm maybe I should add that. Also you can go here for more links to very useful threads in the Android General Stickie Roll up thread.
Again I have to agree with XDA member orangekid, the CyanogenMod7 ROMs are pretty creaking awesome. But I do recomend the Hyperdroid ROM I have linked in my Sig. I have used it for my daily driver for months and the only real problem I have had is the latest update to the ROM the new updated market would not work properly I would have to go to Settings/Applications/Manage Applications. Then find the market selerct it and then select Uninstall Updates. Oh and make sure you do not have the check box checked to aromatic update the market or you will have to do this everytime you use the market. I am currently testing the [17 Aug][SENSE3.0] Pyramid HTC WWE 1.35.401.1 - Real 3D [V2.1][RAF 1.9GB] ROM to sort of test the HTC Sensation's ROM and to check out HTC Sense 3.0.
As for your 2gig SD card no it will work but I do recomend you consider getting a 4 gig SD card. I have heard mixed results from 2 gig SD cards that people use to dual boot with. I personally have never used under a 4 gig SD card and have never had any trouble.
Thank you all for your replies.
I will Try out all the steps to fix my phone first. then i will try to load up android onto it and i will get back to you guys. i thanked all that have helped thank you so much. i will be back around sunday or monday with an update. wish me luck! oh one more question. would a 8gb be a good size micro sd card? or should i get a 16gb?
It really depends on how much space you'll think you'll need like, are you a person who takes a lot of pics or video, do you keep a lot of music on your phone? If you do then yes I would go with an 8gb. If not then you could really just use a 4gb sd card. I use a 8gb class 10 sd card myself and store a lot of pics, roms and backups and I haven't had the need to go back to a 16gb. Also you dont have to get a high speed card either, a class 4-6 is plenty.
If you decide to go the dual boot for Android I would look up a program found here on XDA called Rundroid. It will allow you to run many different Android builds from your sd card and is very simple to use. I would give the link but I'm not by a computer right now, sorry about that.
Sent from my Desire HD using XDA App
Hiii just an update . i did try to hard reset and it does reset but after i reset when it reboots it stays on the tmobile stick together logo.
and i just noticed if i leave it on like this and leave the battery the phone starts to get warm a bit on the back bottom side of the phone.
i will try the steps you gave me and see if it works. thanks.
I tried to restore by volume down+up and power and it reset but no boot. Pleasse help any one. i tried to do the bootloader ( my computer doesnt reconize my phone) it shows me all these codes. any help?
Heres a vid of my phone if it helps.
http://www.youtube.com/watch?v=a2qQsSXPx-s
I dont want to comment on something and be wrong so with that I would take it to t-mobile and see if you can have it switched out under your warranty. I had a very similiar problem that it was stuck on the HTC/T-mobile splash screen and I sent mine in for repair through HTC. They fixed the issue and sent it back (for free), all I had to pay was shipping there. They do say that if they find something thats not covered under warranty like water damage/not the proper software they'll call and let you know if there will be a charge to fix it.
I will say that my bootloader and probabaly everyone elses dont look like yours. Just above the spl-2.08 mine says pb81120..also mine says Cotullahspl where yours does not. If you dont find what your looking for here on the site best bet is to send it in for repair. Even if T-mobile says you didn't buy the warranty or what ever you still may be covered through HTC. This also will apply even if you bought the phone used.
HTC repair can be found here.
were you not holding the volume down button when you turned on the phone?
I would just download/flash stock from that bootloader screen.
I was holdin the vol down and power and i bought it on ebay so.. idk if i have warenty.
Even if you bought the phone on ebay you still could have a warranty. In post 12 I linked HTC repair. If you call them you could find out if you do have a warranty on it or not. They'll ask if for the imei# and run it. Im not sure if its a two year or one year on the warranty but they'll be able to tell you that.
I bought a used HD2 on ebay as well. Mine was listed as broke and was stuck on the T-mobile splash screen. I asked for the imei# from the seller and then called HTC to find out if it still had a warranty which it did, so i bought it. I lucked out that my phone was covered under warranty, you may or may not have the same luck as i had.
Thank i did what you told me and they gave me a new motherboard on mine. Thanks alot