Database Users

please, please help me, sx56 dead

hi every friend,
please help me, i was update my xda to ppc2003 while computer was down, that cause me have to restart it, after that my xda dead, i use hadr reset it says gsm ok, then start a set of test like,ram, usb, sound,sd card. then stoped. can someone tell me how to fix it. thanks a lot, i really need that pda.

hard reset doesn't lead to these diagnosis ... are you sure you didn't go into the boot loader mode ??

only hard reset will cause nothing, i use hard reset and power key come out the bootloader svreen says" gsm ok" then i press action key, it start test

this means "soft reset" ... the hard reset is the small hole with red battery icon.
Anyway, having "GSM Ok" is a good news ... all you need now is to try HARD reset ... and if it doesn't work, you may flash your ROM with a new one using SD card if your boot loader version is older than 6.22

Camera btn + Power btn + Reset btn = Factory default? :(((

Hi!
I`m totally new to this so i would like to ask for a help! I have Qtek s110, and i was reading about updating the ROM and that kind of things, trying to get know better the device.
On http://wiki.xda-developers.com/index.php?pagename=BackupExistingRom
i have read that if you press Camera + Power and Soft Reset, you will enter into the bootloader mode. I wanted to see that mode, and pressed that. I got some message - word and some number and nothing happend (not error message but i cannot remember exactly the word and the nubmer..like some version number).
Then i have restarted the device so i could use it again and when the device finished the boot, i had to calibrate the screen, and things like that, like on the first boot of device (the programs where installing). After that i lost all of my personal informations, contacts, programs!!! PLEASE HELP if there is any help!
Of course, i didnt make any ROM backups! Is there any way to get my data back!? On my storage card i saw some folders that i didnt make myself. Some WMDRM with some .hds file and some 08071200001 empty folder!
Please help!
P.S. Why the hack that guy didnt said that button sequence is hard reset of the device!?? DAMN!
Sorry, but i`m really pissed! I will kill somebody now!

eyej said:
Hi!
I`m totally new to this so i would like to ask for a help! I have Qtek s110, and i was reading about updating the ROM and that kind of things, trying to get know better the device.
On http://wiki.xda-developers.com/index.php?pagename=BackupExistingRom
i have read that if you press Camera + Power and Soft Reset, you will enter into the bootloader mode. I wanted to see that mode, and pressed that. I got some message - word and some number and nothing happend (not error message but i cannot remember exactly the word and the nubmer..like some version number).
Then i have restarted the device so i could use it again and when the device finished the boot, i had to calibrate the screen, and things like that, like on the first boot of device (the programs where installing). After that i lost all of my personal informations, contacts, programs!!! PLEASE HELP if there is any help!
Of course, i didnt make any ROM backups! Is there any way to get my data back!? On my storage card i saw some folders that i didnt make myself. Some WMDRM with some .hds file and some 08071200001 empty folder!
Please help!
P.S. Why the hack that guy didnt said that button sequence is hard reset of the device!?? DAMN!
Sorry, but i`m really pissed! I will kill somebody now!
Click to expand...
Click to collapse
Hi there
There are no way to restore the data from ram since you hard reset your device. The big lost is contact book and sms message. You can try to copy the contact from sim to phone if it is exist in Sim card.
Good luck

try removing the battery n keep it like that for about 10 hrs.. n then put it back on n start the ppc..see if it helps
..n if it doesn't do not worry, ur fone aint dead yet....u'd have to go thru the hard way then

help me plz,urgent plz.

I need help,recently i upgrade my jas jam with (CRC_r14.1-naked.bs)it was good,but after few days,when i switch on my phone,the screen strucks and the display is showing (windows mobile 6.1)and nothing but when yesterday i switch on it again,it displays good,but when i click on windows icon,the list is vanished only it shows(today,recent programs)and nothing is working in windows,and then i connect to active sync and wants to upgarde again with (CRC_r14.1-naked.bs)and i follow all the steps but atlast activesync showing no device is connected,after that i repeat the same thing,but it is showing like that only, wat can i do,iam in trouble can any body tell me how to go through this, i will be very very thankful to u.

Do a hard reset (hold context buttons and hit the reset button with stylus). Or you can go to bootloader (bold power + side OK and hit reset button with stylus) and now you will be able to flash via RUUWrapper.

imate
pajousek said:
Do a hard reset (hold context buttons and hit the reset button with stylus). Or you can go to bootloader (bold power + side OK and hit reset button with stylus) and now you will be able to flash via RUUWrapper.
Click to expand...
Click to collapse
hi,yes i've done like that only (hold the ok button and hit the stylus on rest but still it is giving crcs rom loading )second one (hold power+side ok)then its giving the hermes display with four color bands,what can i do,plz tell me.

ttsadaf said:
hi,yes i've done like that only (hold the ok button and hit the stylus on rest but still it is giving crcs rom loading )second one (hold power+side ok)then its giving the hermes display with four color bands,what can i do,plz tell me.
Click to expand...
Click to collapse
Where you have the colour bands, you can flash from PC without connecting to activesync. At least that works for me.
And try also context buttons on the HW keyboard.

You have to hold BOT soft keys and reset with stylus. Holding down the ok button and resetting does nothing but a soft reset. You want to hard reset.
You will still get CRC's rom loading up as that is the loaded OS.
If you wish to upgrade then, if you have Hard SPL (SPL: 2.10 oli), then you can use the sd card method fromn the bootloader (tri-colour) screen.
SD Card method
1. Format SD card fat32 (2Gb or less ONLY) then copy the .nbh file to it. Rename .nbh file to "hermimg.nbh".
2. Insert into Hermes and go to bootloader.
3. If sd card is formatted fat32 and flash file is renamed properly, follow the prompts.
Cheers...

SD Card Flashing Question!

Hello to everyone,
i have a problem with flashing.
First i had a WM2003 OS on the T-Mobile MDA. Then i tried to flash the WM2003SE with a romkitchen rom.exe over active sync.
The whole upgrade process worked well, but now it don't boots.
The booting procedure hangs on the welcome screen.
Now i am trying to flash a PPC2002 OS with SD Solution. (Because i have no activesync connection)
I have downloaded a *.nb1 rom from romkitchen and make copied it to SD with OS Image Tool.
But i don't know what to do now. When i insert the SD in the PPC it says only "The Card is not readable do you want to format it".
PLZ help!
Best regards
Andy

never heard about the bootloader saying that only a device saying it when it's booted into wm???
one way you can verify that the rom is flashed to the sdcard using the tool
the pc is no longer able to read the card
so that way you can verify that you did it correctly

Well, i did it by the same way (yesterday) ok, we can say you already have your SD card with your ROM ready for the instalation, so your put your SD car inside, then press the power button on top and press the hard reset button (you know it's down the earphones hole) it will apears the bootloader screen and the it will says press action to start or recort to exit, press the action button and it will start to donwload, it will finish saing COOLD RESET and something like that, take out your SD CARD and make a soft reset (the little hole at the other side of the hard reset) and that's it !!! i hope so jejejej let me know

thanx a lot. This worked for me!!

Hard reset fails!

I desperately need an alternative way to hard reset my hd2. Holding the up down button and shortly pressing the on/off button just switches the phone on. No reset. btw I cant start up normally so the software approach doesn't wort either.

Peter65nl said:
I desperately need an alternative way to hard reset my hd2. Holding the up down button and shortly pressing the on/off button just switches the phone on. No reset. btw I cant start up normally so the software approach doesn't wort either.
Click to expand...
Click to collapse
Use the reset button on back whilst holding up/down buttons

a few people have commented on the difficulty of getting both up and down pressed correctly.
I find I get a much better press with the battery cover off, and I press one first, then the second.that way you can feel them connect individually.

Why don't you guys use the build in software to hard re-set the devise.
1] Press Star Icon
2] Press Setting Icon
3] Press System Icon
4] Press Clear Storage Icon
That should start a hard re-set on device and re-store everything back to original configuration.

maniep said:
Why don't you guys use the build in software to hard re-set the devise.
1] Press Star Icon
2] Press Setting Icon
3] Press System Icon
4] Press Clear Storage Icon
That should start a hard re-set on device and re-store everything back to original configuration.
Click to expand...
Click to collapse
why don't you read the opening first again?
the dude can't use the software approach because his windows won't start, remember?

what about using task 29 or the reflash original splash screen while its doing its thing you can use both hands to hold the vol buttons, other than anything else suggested i dont thinj there us another way to hard reset other than reinstalling your rom maybe fix the software wipe storage app.

That works!
11calcal said:
Use the reset button on back whilst holding up/down buttons
Click to expand...
Click to collapse
Thanks, finally got the thing going again.

I have the same exact problem. None of these methods are working for me. Is there anthing else I can do?

Same for me. Locked out of the phone completely. When it boots it only gets as far as the O2 start up screen and doesn't get any further. Hard and soft reset do nothing. Have tried all suggested here already.
When I get to the screen where I'm prompted to press Volume up to restore, it goes straight to 'restore completed' in a fraction of a second, then back to the start up screen when I press Volume up again.
Need help as I now have an HTC paperweight and no phone!

sonicuk said:
Same for me. Locked out of the phone completely. When it boots it only gets as far as the O2 start up screen and doesn't get any further. Hard and soft reset do nothing. Have tried all suggested here already.
When I get to the screen where I'm prompted to press Volume up to restore, it goes straight to 'restore completed' in a fraction of a second, then back to the start up screen when I press Volume up again.
Need help as I now have an HTC paperweight and no phone!
Click to expand...
Click to collapse
Been using magldr? Cos hard resetting with magldr installed just affects magldr, hence a very short reset time that does nothing.

samsamuel said:
Been using magldr? Cos hard resetting with magldr installed just affects magldr, hence a very short reset time that does nothing.
Click to expand...
Click to collapse
No, I don't even know what that is. I'm not very technical and all I had installed was Cookie's Home Tab Editor.

I have the same problem.
My HTC is blocked ( the WM "forgot" the password that I set - a common problem ), so I have to do a Hard Reset that doesn't start.
I can't reflash or do anything else ( as told here ) without instaling HSPL first. As this can only be installed by the Active Sync, and Active Sync doesn't connect to blocked phones, I can't do anything else...
Is there a way to do anything else with only a new ROM in the sd card ? Or I REALLY have to install HSPL first ?
Thanks,
Leo

leodino said:
Is there a way to do anything else with only a new ROM in the sd card ? Or I REALLY have to install HSPL first ?
Click to expand...
Click to collapse
It is possible to be stitched from a SD-card without reinsertion HSPL. It is desirable to stitch official ROM
It is desirable SD-card to format a feather an insertion.