Camera button not working - Cannot find '' (or one of ... - MDA II, XDA II, 2060 General

I recently unlocked a friend's XDA II (the profile details are for this XDA) kudos on a good piece of work.
Thing is, the camera has stopped working.
When the camera button on the side is pressed, the following error message is generated:
Code:
"Cannot find '' (or one of its components). Make sure the path and filename are correct and all the required libraries are available"
I don't have much experience with the XDA II so don't know where to look to see if the camera software is installed, or how to re-install it. There are no obvious mentions of the camera in the settings tabs or the like.
Any help or advice on this issue would be appreciated.
Thanks.

Camera button
The camera button points to "\windows\Camera.exe"
If you don't have that program the camera will not work.
You sould also check the button settings in the settins menu.
Renee

How I got camera to work
The problem came to light when ikki suggested I look for the executable, of course it wasn't there. I then realised the cause for this was that I had cancelled the initial setup apps that ran after the hard reboot so that I could get to the unlocking screen quickly.
It turns out these initial tasks never try ro run again, so the device hadn't had all the bells and whistles strapped on. A hard reset and letting the user proceed through the intial setup solved this problem and installed the custom O2 settings.
Thanks for the help.

Related

A beauty but what a quality beast

G'day all
I recently got myself a lovely HTC wizard (branded O2 XDA Mini S, ). It's a device I've been researching for a while so I was very much excited to try out my first WM product when it arrived this morning.
However, for all it's beautiful design, it's really been a bit of a big pain on several ways. Most significantly and immediately noticable is the very sluggish interface. Some things, like notifications, I can dismiss fine, but the majority of actions, such as starting a program, opening one of the left-hand buttons or switching to landscape mode, take several (maybe 10) seconds to happen and even then the screen will only be partially and very slowly redrawn. This seems to only occur at the 'today' screen (other programs are pleasantly snappy). Anyway, it's rendering the today screen pretty useless and since it's the starting screen it means everything is taking much longer to do. Is this just my device or is this a recurring issue?
Cheers
Have you reinstalled without the o2 Active stuff (basic mode option I think). It the real hog.
Other than tat have a look around the messages is the forum for various registry hacks to speed this baby up.
It does work well, you just have to tweak the heck out of it.
So it's a matter of going around deleting stuff that 02 put on?
Basic install plus something like SPB or Magic button to close apps properly (apart from the ones you regularly use, such as phone/messaging/IE) makes the device at least twice as quick.
wilesd said:
Basic install plus something like SPB or Magic button to close apps properly (apart from the ones you regularly use, such as phone/messaging/IE) makes the device at least twice as quick.
Click to expand...
Click to collapse
This is exactly what I've done on my mini S...O2 Active is really doggy, the interface looks fine, but mini S can't affort....
Basic intall with SPD Plus work fine for me....I can now play mp3 & mp4 files smoothly with beta player, connect BT GPS receiver with TT5...
To really clear all the clutter, perform a hard reset and when you get to the 'about to customise' step (short countdown) perform a soft reset.
This results in a completely clean OS thats much more responsive. SPB pocket plus is a good app to install next.
There are other registry tweaks such as disabling menu animation that make an additional improvement to the responsiveness
There are plenty of discussions about this in the other threads - have a search around.
Dunno if this works on the Wizard but on the magician, if you map one of your buttons to the "Start" menu, then you can do a lot of program switching without going via today page - and the whole re-draw of it.
Particlulrly if you chose wisely the 5 programs that you can specify for the start menu.
jacro said:
To really clear all the clutter, perform a hard reset and when you get to the 'about to customise' step (short countdown) perform a soft reset.
This results in a completely clean OS thats much more responsive. SPB pocket plus is a good app to install next.
There are other registry tweaks such as disabling menu animation that make an additional improvement to the responsiveness
There are plenty of discussions about this in the other threads - have a search around.
Click to expand...
Click to collapse
The soft reset method is OK if you don't use MMS as the MMS app will not be installed, if you want to use MMS though the Basic install is better
I cleaned my mini-s the hard way
Hard reset, soft reset, then installed some of the extROM cab files manually and setup the GPRS manually too. Wizard now runs ok, its not fantasticly fast, TTN5 still takes time to load, and incoming calls while it loads cause problems (but thats only 15 secs!). Magic button is great, pick the apps you need to keep open (phone, text messages, etc) and "keep alive" and "hide when inactive" then just use close all to keep the RAM free.
Alright - I'll try one of these hard/soft reset cleans. But...
Another problem I've been having is that ActiveSync refuses to detect my device over USB. The USB connection seems fine (Windows XP detects new but unkown hardware - seems to lack an RNDIS driver or something), but a sync I can't make work.
So I can't install anything again. After a hard reset will applications such as phone and messaging be restored or will the require a reinstall (that I can't do)?
Also, remapping the buttons sounds like a brilliant idea. I'm not so big on IE so if I made that my start menu toggle I could reach a whole load of things one-handed. One thing that oft annoys me is when you have to close a program or dialogue box with the cross in the top-right. Can that be remapped to, say, the voice recorder button so I don't have to keep awkwardly touching the screen?
That Magic Button sounds handy also - freeware by any chance? I'll google it in a sec. It's annoying (well, peculiar, coming from a PalmOS background) to have several applications running at once - all that's needed is the phone/messager apps and perhaps the music player.
Thanks for all yer replies!

I think my camera is broken

i did the registry tweaks to enable the extra shooting modes. now when i go to start up the camera mode i get the following message:
unable to initialize camera. failed to set up the camera device.
Click to expand...
Click to collapse
i then went back into registry editor and put the settings back to their default settings. still won't start up
am i going to have to do ANOTHER hard reset? i only got the phone a week ago... seems like i hard reset every day!
can i reinstall the camera software. is there a .cab file available anywhere?
elmarko99 said:
can i reinstall the camera software. is there a .cab file available anywhere?
Click to expand...
Click to collapse
It's best to hard reset it clean !!
was just about to hard reset then i thought to check advanced config. i had changed some camera settings so i put them back to default now it works perfectly!
I had the same trouble, "unable to initialize camera" and tried the same thing. I put all the camera settings as default ones at the Advanced Configuration Tools. Still I can't make it work.
Would you give me any advice?
Thanks.
nekiragi said:
I had the same trouble, "unable to initialize camera" and tried the same thing. I put all the camera settings as default ones at the Advanced Configuration Tools. Still I can't make it work.
Would you give me any advice?
Thanks.
Click to expand...
Click to collapse
in situations like yours, it's probably best to hard reset. not fun, but at least you know your camera is working like it should.
A hard reset is not needed,
just a soft re-set would have done,
I have already posted about this issue,
The reason for that message is that the camera was still working in background you just didn't see it.
The camera does not correctly shut down when using the camera tweaks which is why they were turned off by default.
If you look at the home screen occasionally you'll still be able to see the background moving as the camera is active behind.
It also looks like artifacts on screen.
You can only replicate the issue if you take a picture in either sport or burst mode, on some phones.
Thank you, cortez.i. I followed your advice and made a hard reset, but somehow, in my case, still the camera didn't work. It turned out to be a hard ware problem and I asked and was given another new touch diamond today.
I had thought that it would be a good chance to learn some registry settings but for your advice, I could make a right decision! Thank you a lot!!!

How do you switch off the camera shutter sound??

how do you switch off the camera shutter sound??
It's kinda annoying from time to time. And it is pretty loud, which makes the phone useless inside my lecture room when i want to take a photo of the lecture notes...
Open the camera, tap the screen once to show the toolbar icon, tap it to open the toolbar and tap the gearwheel for settings.
Page 3 sets the shutter sound. Whatever you choose will be remembered.
I might be barking up the wrong tree here, but have you considered looking through the options menu?
The problem is in my page 3, the options are:
Shoot option
Image properties
Effect
Metering mode
No idea then, strange that the option is missing from your device as it's (the option) in the official manual for the Touch HD. I'm using Dutty's 2.6 ROM which has a different camera version to the Stock ROM, I'm pretty sure the option was there on my device before I got the flashing bug, though.
do you have stock rom? my page 3 has shutter sound. metering mode is on page 4
lunatic_silf said:
how do you switch off the camera shutter sound??
It's kinda annoying from time to time. And it is pretty loud, which makes the phone useless inside my lecture room when i want to take a photo of the lecture notes...
Click to expand...
Click to collapse
mute your phone , especially during lectures
EDIT:
did not know it's AU version, try overwriting the shutter sound snap.wav in the windows folder
or in the registry "HKLM\Software\HTC\Camera\Common\SourceOfSnapSound"
or replace the camera EXE form a different WWE ROM
I swear, some people just want us to feed them.
Not even mute can silent the camera shutter.... This is so annoying.....
Shutter sound cannot be turned off on aussie version
No need to be nasty guys. The posters problem is that they have purchased an Australian version of the blackstone (I have the same phone). It turns out that Telstra in all their wisdom have ensured that the camera sound cannot be turned off (this is something they are doing with all phones now to stop people taking 'up skirt' pics and such). So even if you turn the sound off, if you go into the camera and use it, the phone sound is turned back on. People have tried to change the registry values for the camera sound and this does nothing. Someone has also managed to find the sound file (which cannot be deleted) and replaced it with another sound, but on soft reset the sound is replaced back to original loud annoying and very embarrassing sound.
So if anyone has any suggestions on how to fix this (without flashing the rom), there will be a lot of appriciative people out there.
Aaronc1978 said:
No need to be nasty guys. The posters problem is that they have purchased an Australian version of the blackstone (I have the same phone). It turns out that Telstra in all their wisdom have ensured that the camera sound cannot be turned off (this is something they are doing with all phones now to stop people taking 'up skirt' pics and such). So even if you turn the sound off, if you go into the camera and use it, the phone sound is turned back on. People have tried to change the registry values for the camera sound and this does nothing. Someone has also managed to find the sound file (which cannot be deleted) and replaced it with another sound, but on soft reset the sound is replaced back to original loud annoying and very embarrassing sound.
So if anyone has any suggestions on how to fix this (without flashing the rom), there will be a lot of appreciative voyeurs and perverts out there.
Click to expand...
Click to collapse
Fixed for you
LOL, well I am both of those things, but don't use a phone camera for either
Problem Solved
First things first:
It turns out that in the aussie version the source sound referred to in the registry (snap.wav) does not exist.
There is also other sounds within the windows folder that were part of the ROM (ShutterSound.wav and TimerSound.wav) but changing these had no effect on the camera sound.
Solution:
I managed to find the source of the sounds within a resource file and have successfully changed them to blank waves. The only issue with this work around is that the phone sound is still switched back on (even from silent mode) and stays on until ~20 seconds after shutting down the camera down, this means that if someone calls, emails or sends a message the corresponding sounds will be made. This could be a problem in lectures etc, but I can't think of any other work around. I'll work out how to make a cab for the change and post it here, in the meantime if anyone wants to know how to manually do the change let me know and i'll post it.
The simplest option for this issue would be for Aussie guys to flash a non-Oz ROM and be done with it. Flashing some of the newer ROMs has many benefits, not least of which would be the ability to mute the shutter sound from within the camera app itself.
To my mind, a much more elegant solution.
Camera Sound Silencer
Flashing the phone is obviously the cleanest method, but this option is not available to everyone. I have recommended the HD to people who have had their work purchase it for them (in such cases flashing is not an option). I also know people who will never flash their ROM, and yet want a quick and reversible solution for their problem. I won't be flashing my ROM until the shipped version of mine is available (I got caught with a warranty issue and a different ROM version before). I'm sure this won't happen until I extract my own so flashing isn't the answer for everyone.
Anyway attached is the CAB for silencing the sound. This works for the Australian ROM (not sure about other countries, so if anyone else tries it, let me know if it works). You first need to install the sdkcerts (this ensures you don't get asked if you trust the source each time you start the camera), then install the CamSilencer(AU).
REMEMBER that each time you use the camera the sound on the phone gets switched on, so if you are worried about phone calls etc, then make your alerts blank sounds too.
Any feedback would be good!
AaronC1978 - Any chance of getting a version of this that will work for the Touch Diamond? I've got a Telstra Touch Diamond that's a work phone, so flashing it is out, as you rightly mentioned above.
I've tried installing both your CABs here, but it's broken my camera. When I go into the camera, it works for about 2 seconds (and I can see the picture from the camera on the display), then the display goes black, and I get an error pop up "Failed to initialize camera. Failure to initialize the camera device.". I uninstalled the CamSilencer CAB, and it's back working again now, but (of course) I still have the obnoxious shutter sound.
Having the other phone sounds turned on after I've been using the camera isn't a problem to me, as I very rarely have the phone on silent anyway, and especially not if I'm taking a picture. I just want to get rid of that horrible loud camera sound! There's one thread in the Diamond section from last year that's gone unanswered and abandoned - help me Obi Wan Kenobi - you're my only hope!
Any help would be very much appreciated!
Thanks!
Matto
MattoR said:
AaronC1978 - Any chance of getting a version of this that will work for the Touch Diamond? I've got a Telstra Touch Diamond that's a work phone, so flashing it is out, as you rightly mentioned above.
.....
Click to expand...
Click to collapse
Hey Matto,
I'm no Obi Wan, two weeks ago I knew I could install cabs onto my phone, but that was the extent of it!!
Assuming that a similar file is modified on the diamond I should be able to fix it for you. But first you are going to have to get the file for me. If you don't have it installed you will need to use total commander to be able to get the file:
http://www.ghisler.com/pocketpc.htm
Install that on your phone and open it. In the total commander window, open up the windows folder and scroll down to a file called 'cameraRC.dll' and click it. Now click 'copy/move' in the file menu at the bottom of the screen and click click 'tree' on the popup and select eg your storage card. Now click copy on the popup.
Now connect your phone to your pc and move the cameraRC.dll file onto your pc (if you cant see it, make sure that you have "show hidden files" enabled on your file options on your computer).
When that's done, upload the file here and i'll take a look for you.
PM me if you have any trouble.
Hi Aaron,
Sounds like I'm about 2 weeks behind you then! I've uploaded and attached the CameraRC.dll file to this post here as per your beaut instructions - if you wouldn't mind taking a look, I'd really appreciate it. I'm sure all the other Aus TD users would as well!
Thanks for all your help - this has been driving me mad!
Thanks!
Matto
Hey Matto,
I'm glad the instructions were clear, hopefully this CAB fixes the Diamond sound. You still need to make sure you have the sdkcerts file installed first. Also make sure you have uninstalled the HD CamSilencer (which I'm sure you have since it muffed up your camera). Don't stress if this doesn't work, because it is the right file and it just means I've done something wrong on my end (can't test if it works). Let me know how it goes.
Aaron
Hey Aaron,
You're a legend, my friend! Works a treat. Takes away both the focus zoom/lock sound, as well as the obnoxious shutter sound! I already had the sdkcerts installed from the previous attempt, and had uninstalled the old HDCamSilencer.CAB the other day, as you had guessed. Copied the new one across, installed it, rebooted the phone and voila - no sound!
Thanks very much for your help with this - very much appreciated! I'll let you announce it to the guys over in the TD forums, since it's your work and only right that you should get the kudos for it! I'm sure all the Telstra TD users will be very appreciative!
Again, thanks very much for your time and effort into doing this for me! Well done!
Thanks!
Matto

[App Dev]Location Manager 1.2 (need help testing other devices)

Location Manager 1.2​
This is my first yet-to-be-published app in the android forum so I am excited to see how it goes. I have thoroughly tested it on my HTC Aria but I would like to see the results on other phones. The idea is as follows:
IDEA​Assume that you take your phone to different to different places and you are annoyed of turning off wifi, turning on gps and placing your phone on vibrate whenever you go to certain places. This program simply lets you keep specific profiles for specific places (such as your home, school or workplace). This saves you time, patience, as well as battery.
For example, I go to school and I turn off my gps, my wifi, and my Sound. When I go to work, I normally keep my sound on, my gps off, and my wifi on. I keep this program running and it simply takes the location from gps/wifi/cell tower(whichever is on) and it lets you program locations using an address and if it sees that I am there, it will run that profile. Thankfully, it also lets my override my profiles just in case I want to use google maps in school or keep my sound on at work.
Version Control​Version 1.0 - The first version which has basic functionality with wifi and sound control. The settings page exists but does not function. The next version will have bluetooth support and full settings functionality.
Version 1.2 - This version has new icons and has functionality for settings page. Everything in the app should now work but may not
Help​Please post on this thread whether this app works for you or if you are having difficulties.
Downloads (also available below to xda users)​Version 1 - http://bit.ly/qW4l0A
Version 1.2 - http://bit.ly/pxCzUZ
Thanks for downloading my app ​
i always wanted something like that
On my HTC Inspire I get a force-close when I try to "add location" -> "update map".
@Gene Pool - I just discovered that stupid error. Ill fix it in the next version, but basically you are supposed to enter the address first and then press update to update the map. In the next version Ill make it say that
Giving it a go go on Samsung galaxy s2 running villianrom 2.0
Installed, sadly getting FC´s when starting the app
If anyone is willing to try a super unstable (yet newer) version of the app, please try out the following apk file. The settings page does not work but it fixes several gps fixing bugs which relate to the force closes.
-Thank You
Seems like I had to turn on GPS BEFORE starting the app. Now it force closes when choosing to add a location
Ive tried the beta version you posted, everything works except from adding a location, it still fc's on me.
Thanks for the hard work, it's time for a easy to use alternative to tasker
I tried the latest version, but I couldn't see the map. I can press Update Map, but no map appears. Just an empty raster.
On my wildfire I can't read the text at bottom(at main screen), it says "Settings page does not work yet. This is the alpha version."
There is some text below that, but it doesn't fit on my screen. And in landscape I can't see anything below Longitude.
On the about screen, I can't look further than "keeping unnecessary things running" on portrait.
I think it's better to put About and Settings into Menu, because most of the time you won't need it.
When adding/editting a location it's a little bit confusing. I think I'd prefer a dropdown menu for wifi/sounds. Values like: Wifi on, Wifi off, don't change.
When you leave the Profile Name empty, it'd be nice to get a default value.
When I press "Edit locations", and then use my back button, the application closes. I'd like to go back to main screen instead. When I open Edit Locations after adding locations/reading about/settings, and I press back button I need to press it serveral times, but nothing happens. After a few times it closes the application.
And I prefer imagebuttons instead of "edit" button, I'd be nice to have the edit button on the right.
It looks like your using LinearLayout with default Horizontal orientation. RelativeLayouts would be beter in some cases.
Latest comment, I think normal users don't care about his/her current Latitude/Longitude/Accuracy data. I think you could remove that.
Ok, that's it for now. I hope you can use some of my feedback
EDIT: Another bug, I need to kill the application to prevend it from using my GPS 24/7. I can't stop it the normal way. Also, I think it's better to use a service instead of Activity for things like this.
I Cant thank you guys enough for helping test the app. Anyway, I will apply those feedback into a new version and post again. Also, would you say the first one is better or the second one? I tested the new version today while going to work and I discovered several errors in GPS acquisition.
Sent from my Liberty using XDA App
EDIT:
Version 1.2 just got released - please try it out and it has incorporated several of the features you guys suggested.
Looks better than previous versions. But...Is there a way to delete locations?
Next one will have that and Bluetooth and backlight settings.
Sent from my Liberty using XDA App

[Q] Remove Camera Click Sound

Heya, new to fiddling with root files but really wanted to get rid of camera click. Followed advice about renaming camera_click.ogg in terminal Emulator using:
ADB shell
SU
mount -o remount,rw /dev/block/mtdblock4 /system
mv /system/media/audio/ui/camer_click.ogg /system/media/audio/ui/camera_click.ogg.old
(source: www droidforums net/forum/droid-hacks/23107-droid-remove-camera-click-shutter-sound html) - sorry new poster not allowed to post url
Now have issue when open stock camera and vid in Motorola Atrix (gingerbread 2.2.2) where:
1) camera opens, but have lost all previous images.
2) camera takes silent shot
3) camera 'locks' open and can't return to 'desktop', can't view image taken,, can't access menus etc
Basically camera is stuffed...
is there a solution, is there code to go back and follow some of the other advice in here etc?
It is a setting. What's the point?
Sent from my MB860 using xda premium
it's a setting what's the point? Thanks for taking the time to reply. I did mention this is all new to me. I asked a question because i do't know the answer. It's a swttibg whats the point is hardly helpful.
To anyone else, i'd appreciate any help or advice. As i mentioned i'd just like to undo what i've done usibg script i found on another forum. looking forward, hopefully, to hearing from you!
have you tried to add the following line to local.prop file located in /data?
ro.camera.sound.forced=0
If you don't have the file then just create the file and add it, otherwise append it to the end of file.
File permission is: 0644
Good Luck
I never heard of adding ".old" on the end of the file. I always add ".bak", then reboot. Works everytime.
EchoK8 said:
it's a setting what's the point? Thanks for taking the time to reply. I did mention this is all new to me. I asked a question because i do't know the answer. It's a swttibg whats the point is hardly helpful.
To anyone else, i'd appreciate any help or advice. As i mentioned i'd just like to undo what i've done usibg script i found on another forum. looking forward, hopefully, to hearing from you!
Click to expand...
Click to collapse
I giggled when I read gingerbread 2.2.2
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Thanks for pointing that out, that gave me a good laugh to start the day off.
Phalanx7621 said:
I giggled when I read gingerbread 2.2.2
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Click to expand...
Click to collapse
EchoK8 said:
it's a setting what's the point? Thanks for taking the time to reply. I did mention this is all new to me. I asked a question because i do't know the answer. It's a swttibg whats the point is hardly helpful.
To anyone else, i'd appreciate any help or advice. As i mentioned i'd just like to undo what i've done usibg script i found on another forum. looking forward, hopefully, to hearing from you!
Click to expand...
Click to collapse
I was on my phone at the time (tiny keyboard) and was trying to succinctly say that if you open the camera app and touch "settings", there is an option to quiet the click.
When I first read your OP I didn't notice that you identified Gingerbread as v2.2. You are confused. v2.2 was named Froyo (frozen yogurt). Gingerbread is v2.3. My answer relates to Gingerbread. If you are actually on Froyo, I don't remember if the setting was available on that release.
So, in Gingerbread silencing the camera is a setting and there is no point performing internal surgery.
Yep, ok, noob blunder. Novice blunder, amatuer, beginner whatever blunder. Glad you all got a giggle, and thanks for pointing it out. I was told at the shop it's Gingerbread. The About phone states 2.2. So, if that makes it Froyo then great, i've learnt the basics today. Thanks for your help again!
Well re- the settings, froyo or otherwise, yes there is a setting to turn sound off. You turn it to off and it still makes the click sound, volume can't be altered. Hence diving off the deep end and into something i know very little about - internal surgery!!
Live4nyy - is there a simple way to rename to .bak (you see my level of expertise here - none! - in asking).. forward some script for me at all?
or
CSharpHeaven that sounds gr8... any way to explain to a complete novice how to do that?
I thank anyone who sticks with me to reply after this MUCHLY as you know you are dealing with a friking novice
Seriously....why would you want to silence your camera again?
Do you have root? If yes, then you can just use any file manager that has root access, ES File Explorer works I've heard, and just go to the folder where the sound file is (/system/media/audio/ui) and just select to rename the file and add ".bak".
EchoK8 said:
Yep, ok, noob blunder. Novice blunder, amatuer, beginner whatever blunder. Glad you all got a giggle, and thanks for pointing it out. I was told at the shop it's Gingerbread. The About phone states 2.2. So, if that makes it Froyo then great, i've learnt the basics today. Thanks for your help again!
Well re- the settings, froyo or otherwise, yes there is a setting to turn sound off. You turn it to off and it still makes the click sound, volume can't be altered. Hence diving off the deep end and into something i know very little about - internal surgery!!
Live4nyy - is there a simple way to rename to .bak (you see my level of expertise here - none! - in asking).. forward some script for me at all?
or
CSharpHeaven that sounds gr8... any way to explain to a complete novice how to do that?
I thank anyone who sticks with me to reply after this MUCHLY as you know you are dealing with a friking novice
Click to expand...
Click to collapse
I'd like to replace my shutter sound. Does anyone have a sound file of a shotgun blast/ slide rack?
Thannnks
island-guy said:
Seriously....why would you want to silence your camera again?
Click to expand...
Click to collapse
i actually dont want or need to silence it again. my query is how to restore my camera to a mode where it is functional bcs at the moment its stuffed. If theres a simple string to go back that'd be ideal.
live4nyy said:
Do you have root? If yes, then you can just use any file manager that has root access, ES File Explorer works I've heard, and just go to the folder where the sound file is (/system/media/audio/ui) and just select to rename the file and add ".bak".
Click to expand...
Click to collapse
Ok, got 'root explorer'... so simple just to enable R/W and rename.. Thanks. Changed to .bak . Seems better, actually appears to take photos and has more functionality than after i ran that script... but
I don't know what that original script did. Here's what using my built in camera is like:
1) Turn Camera on. Opens, appears normal. Take photo fine. Thumbnail (link to camera roll) in bottom corner as per usual, which disappears after a few seconds as per normal.
So far so good.
2) After taking another photo decide to click on thumbnail to open camera roll. Camera Roll opens but says there are no pictures to display. return (via 'back' menu button) and the thumbnail of the images is there again. Ok, weird.
3) Try take another photo... nothing happens, wait a few seconds and camera switches off back to ;desktop'. Try open camera again but no dice. In fact all phone functionality gone, frozen, locked up, including menu buttons below screen. Put phone to sleep by pressing rear button briefly. Press rear button again to awake. Unlock swipe is slow to respond (a few seconds) and then back to main desktop screen. Can once again open camera. Repeat process from dot point 1).
4) next time go to camera roll, this time locks up on camera roll (which has no images to display again). Sleep and wake up camera, slow swipe unlock, can take photos again when open camera. repeat step 1 - 3 again!
5) Sleep, wake up phone. This time straight to gallery instead of camera. Gets stuck telling me it's loading media files. Frozen.
6) sleep- wake - slow swipe unlock. This time to video. Same thing as camera. Frozen.
I could go on.... but im sure the idea is clear!
used root explorer to simply remane camera_click.ogg to original name. Same as above
Tried camera zoom fx app incase it was the built in camera app. This won;t even open - well, it starts but then says i need to force it to close.
Does this need a factory reset??!
Ta
Have you rebooted? Maybe try and go into "Manage Applications" under the "All" tab and find the camera and "clear data"?
EchoK8 said:
Ok, got 'root explorer'... so simple just to enable R/W and rename.. Thanks. Changed to .bak . Seems better, actually appears to take photos and has more functionality than after i ran that script... but
I don't know what that original script did. Here's what using my built in camera is like:
1) Turn Camera on. Opens, appears normal. Take photo fine. Thumbnail (link to camera roll) in bottom corner as per usual, which disappears after a few seconds as per normal.
So far so good.
2) After taking another photo decide to click on thumbnail to open camera roll. Camera Roll opens but says there are no pictures to display. return (via 'back' menu button) and the thumbnail of the images is there again. Ok, weird.
3) Try take another photo... nothing happens, wait a few seconds and camera switches off back to ;desktop'. Try open camera again but no dice. In fact all phone functionality gone, frozen, locked up, including menu buttons below screen. Put phone to sleep by pressing rear button briefly. Press rear button again to awake. Unlock swipe is slow to respond (a few seconds) and then back to main desktop screen. Can once again open camera. Repeat process from dot point 1).
4) next time go to camera roll, this time locks up on camera roll (which has no images to display again). Sleep and wake up camera, slow swipe unlock, can take photos again when open camera. repeat step 1 - 3 again!
5) Sleep, wake up phone. This time straight to gallery instead of camera. Gets stuck telling me it's loading media files. Frozen.
6) sleep- wake - slow swipe unlock. This time to video. Same thing as camera. Frozen.
I could go on.... but im sure the idea is clear!
used root explorer to simply remane camera_click.ogg to original name. Same as above
Tried camera zoom fx app incase it was the built in camera app. This won;t even open - well, it starts but then says i need to force it to close.
Does this need a factory reset??!
Ta
Click to expand...
Click to collapse
live4nyy said:
Have you rebooted? Maybe try and go into "Manage Applications" under the "All" tab and find the camera and "clear data"?
Click to expand...
Click to collapse
Thanks L4NYY.. yep had rebooted. Tried clearing data but all the same
Had a quick look in the internal storage DCIM folder..All files appear to be there. The one vid file has a play button icon. The .jpg's have the android robot icon. I don't know what was there before. Trying to open the files from here freezes the phone.....
Connecting usb and viewing dcim shows that any images taken since the change to camera_click.ogg appear unknown thumnails in the PC explorer..and can't be opened on the PC via USB connection or when stored locally on the PC itself 'can't display this is an empty file' . This is probably all irrelevant but might be useful to someone, somehere...
Have just noticed today that battery was going flat very quickly. Realised since rooting and using that script (can't decipher which) that location services are no longer working, hence apps that provide location services are continually searching and draining battery. Yes i can turn those services off, but wouldrather resolve the issue!
I'm thinking more and more like factory reset Any thoughts?
Just factory reset. Used Astro File Manager to backup apps before hand, which for interest worked well (although did have to reinstall one by one). Of course Appstore keeps a lsit of purchased apps as a failsafe for thsoe.
After rest, reinstalled apps, including Root Manager. Simply followed Live4NYY's advice, renamed camera_click.ogg to camera_click.ogg.bak
All issues described earlier resolved. Camera functional and silent.
just goes to show sometimes you should ask noob questions. I tried following instructions on a post to avoid annoying the experts with a mum-mum dad-dad question! Anyhow, thnaks to live4nyy for taking the time.
Ciao
The ".bak" just stands for "backup". It will essentially hide any file/app and keep it from running (which in turn frees up RAM). So if you had a system app that you don't use you can just add ".bak" and it would be the same as freezing it. It's much safer than deleting files and apps as you can always go back and remove the extension (and reboot) and it will be back to normal.
EchoK8 said:
Just factory reset. Used Astro File Manager to backup apps before hand, which for interest worked well (although did have to reinstall one by one). Of course Appstore keeps a lsit of purchased apps as a failsafe for thsoe.
After rest, reinstalled apps, including Root Manager. Simply followed Live4NYY's advice, renamed camera_click.ogg to camera_click.ogg.bak
All issues described earlier resolved. Camera functional and silent.
just goes to show sometimes you should ask noob questions. I tried following instructions on a post to avoid annoying the experts with a mum-mum dad-dad question! Anyhow, thnaks to live4nyy for taking the time.
Ciao
Click to expand...
Click to collapse

Categories

Resources