i need urgent a housing for xda2/imate pocket pc or at least the black back that contains the camera lens and sd/mmc slot .so can anyone tell me where to buy it online, thanks and awaiting reply
there are many threads like this one
http://forum.xda-developers.com/viewtopic.php?t=4951
in the forum stocking up for it
http://forum.xda-developers.com/viewforum.php?f=4
I think he is looking for an integral part of the xda2 rather than a case for it., I have no idea where he will get it though.
Related
To cut a long story short, i dropped my xda2 in the toilet at work!
so went home and claimed it on my house insurance and i now own a lovely spvm2000 but im left with this xda2 thats been down the pan, the thing switches on and it all appears to work fine except its black listed, obviously coz i claimed on insurance so i will open it up and sling the pcb in the bin, unless anyone wants some componets from that, but i shall not be selling the phone complete or the pcb seperate. so for sale i have everything else here is a list of what i can think of
fully working screen with no scratches
houseing(scratched but back cover is fine)
4 styli (3 in original o2 retail pckaging)
all the box with instruction and sw cd
leather case
aluminium case (scratched)
Genuine Battery
Cradle
thats all i can think of atm, if u want any of it just make me and offer, dont want much for the stuff as its just sitting there redundant now and not being used!
if u can think of anything else that came with the phone that ive not listed let me know and ill let u know if i got it!
mike
NeCrOpHiLiCaT -- IF you cut the upper part of the PCB off, I'll like the board parts please. CYM
let mw know what bits u want and ill take them off hte board
hi
how much for the lcd ??
im open to offers on all the parts, make me an offer and ill let u know whether i like it or not 8)
I'm interested; did you get my e-mails? Hopefully I am not getting blocked.
pm sent
I need the screen..if u can spare obviously at some cost...pls let know
what about the housing?,my is very damaged and looking for another one.
Connector
Hi Mike, Im interested in the connector that is connected to the mother board, at the base of the phone , mine's gone caput ! :?
the housing is damaged but depends on how bad urs is if it worth akeing my one. the screen is still for sale, and as fot that connector what one do u mean?
connector XDA2
Hi the connector is the one at the base of the PDA, that connects to the dock for charging / activesync, and is connected to the PDA's Mother Board,
Thanks Brennen.
ok that connector looks easy enough to get off, how muchy would you offer for it, if i can remove it without damaging the legs?
How does twenty quid sound...............
did u still got the front AND/OR back casing (as long as it's only scratch not cracked) ? how much will it cost ?
thx.
contact : [email protected]
hi ,i need the motherboard
I can offer you 100.00 US Dollars for the motherboard, can you send me to New York city?
How much is going to cost me the shipping charges?
This is my email
[email protected]
we can work out about my offer
regards
Jorge
I am interested in the screen.
Hi
I am interested in the screen. Can you please give me an idea of how much you are looking to get for it. I am in london, how would it work.
thanx.
Re: connector
Hi, yes I'll have the connector ( £20) you can contact me on
[email protected] ok
i have a problems with my lcd.
http://img11.echo.cx/my.php?image=dscn44310av.jpg
how much for your lcd?
if somebody want another piece of my qtek 2020 (dopod) i can deal...
I hope someone can help...
In the process of replacing my LCD, i damaged the main ribbon cable (it has a small tear). Does anyone have one to sell or know where i could buy a new one??
thanks
Dean
Try here... http://www.gethightech.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=CS
and here... https://www.cellulardr.com/proddetail.php?prod=Cingular8525LCD&cat=125
It's amazing what that Google thing can do.
thanks for your reply - google is indeed a marvelous tool. Unfortunately, I've had no problems locating a replacement LCD, its the ribbon cable which i need - the one which connects the LCD through the sliding keyboard, also accommodating the camera and ear piece.
now, if you could pull that one from google, you've got a friend for life....
thanks
dean
Try it there:
http://www.diytrade.com/directory/g...bbon_for_Dopod_838_Imate_K-jam_O2_Mini_S.html
However, the one in the link is for the sister model. I was going to contact this firm to see it they have it for our Hermes too, but I'm waiting to see if I really need one - maybe later...
If you're successfull in finding one either at the above firm or elsewhere let us know!
Thank you / You're well come !!!
thanks microft - I sent an email to the company requesting a flex ribbon for the Hermes, I'll keep you posted on the outcome. I also found this mob:
http://www.factory2customer.com/index.php/cat/Home/cat_id/33218
The have all the parts but they appear to be only a wholesale operation. I'm also waiting to hear back from them.....
Anyone else got any leads???
It appears i'm caught by the boo-boo's. The only company authorized to stock the ribbon cable in Australia are Mobile Phone Solutions, who won't supply the item, just repair for quite a tidy sum. They also have quite a long waiting list.....
Is there anybody out there who can sell me one?
please...
I would like to replace the housing of my Tytn II EU
Including the front keyboard and the case buttons.
Where can I find instructions how to open the case?
Where to buy the best quality (original) housing?
Help appreciated!
John
First, you dont specify which Kaiser you're looking to disassemble. 2nd, we have a search feature on this forum. It works rather well too. You could of typed less in the search box and found your answer almost immediately. But instead, you chose to contribute more clutter to our forum. Thanks.
I found this in 2 seconds flat...
http://michael-channon.mobile.spaces.live.com/ent.aspx?h=cns!4472423472DCFC38!287&fp=/top.aspx
Always check out the Wiki first. You'll be surprised at what you will learn by reading it.
http://forum.xda-developers.com/showthread.php?t=39743o
Can you tell I haven't had my coffee yet?
Thanks for the quick reply.
Sorry to kick-in an open door, but I am new to the forum and could not find it.
I just added the information in my original message.
I should have mentioned it in the title.
I am looking for a detailed instruction on desassembling the Tytn II
Thanks John
http://mikechannon.net/PDF Manuals/HTC_Kaiser_Service_Manual.pdf
I can let you know from personal experience that it is very simple to get in and strip down the phone to the bare case. I bought a very well used and battle scarred phone on ebay and replaced the case in under half an hour; (proper tools used) a T6 and a small phillips were used. To separate the casing from PCBs i just used my fingernail, but a credit card can be used ( it was just cumbersome for me). Mike has got the expanation down with video and everything. If you run into any problems, just give a shout!
Hey special people those using the lovely phone called 'Wildfire'
Have someone tried replacing original case with a dummy phone's case? Can you part the dummy? Are the dummy's case and real phones case is in the same size? Is it possible? If it's possible it would be great.
I wanted a white one but the seller only had the gray one so this would be a chance to get my dream-phone
If someone tries this please post it here Thanks.
What's a dummy phone?
A dummy phone is a display-only version of a real phone. They don't work and you can't make them work (some people believes that you can ) They have no chips, cards, electrical system...
You can find one here.
uhm, this could be intresting. have you tried asking the seller?
I haven't because I thought he doesn't have information about this but after saw your post I asked. Now waiting for answer
Just got the answer. He said that we can't. So bad
if you want to put a white back on try htcaccessorystore.com/uk/p_htc_item.aspx?i=202429
It doesn't look like white to me
hi guys
please help me.i hope its some solution for my problem
i got ripped off little power button bit on the logic board and wondering if is any
chance to stick it back with any tape or anything ( solder) .no idea
also is this essential to fix in terms of not working lcd .
basically my phone is working fine but since this bit is ripped off my phone lcd doest not light
Im new in there so please i got some photos byt cant upload yet.
can anybody help me with it?>
You'll probably have a lot of trouble getting that back on, are you rooted?
youll have to replace the entire main flex cable the power button is attached to.
http://www.ebay.com/itm/HTC-Desire-G7-Google-Nexus-One-Main-LCD-Board-Flex-Cable-Ribbon-Repair-Part-USA-/320813342861?pt=LH_DefaultDomain_0&hash=item4ab1f7208d
I buy alot of parts from this seller, and that is the part you need