I am just curious, I have a lot of software, and it was nice to hide it in ROM versus the limited RAM. If no one really plans this, I may just try to install as much as I can to storage card.
Re: Anyone plan on putting the new ATT wm2k3 ROM in a kitche
ChrisW said:
I am just curious, I have a lot of software, and it was nice to hide it in ROM versus the limited RAM. If no one really plans this, I may just try to install as much as I can to storage card.
Click to expand...
Click to collapse
Hey Chris.
Maybe we can make a deal....
Which software do you want to include in the ROM?
Is ist freeware or have it to be registered?
Maybe you can send me the software and i´ll take a look at it....
Regards
Stefan
well, depends on the amount of room I have to work with
The programs I have and primarily use are:
Microsoft Voice Command
Pocket Plus
nPOP
MorphGear (game emulator)
PocketTV/PocketDiVX/or some movie media program
vxUtil
AIM (I think is included on most wm2k3 roms)
PhonExt
some are pretty hefty, but I have copies off all that I could get you. If you can give me an idea of how much room they take, I'll see what all could be sent over. MsVC has to go in ROM/RAM though, I can't put it on a storage card due to speed req's
ChrisW said:
well, depends on the amount of room I have to work with
Click to expand...
Click to collapse
In the ROM are about 3MB free for own Programs....
Microsoft Voice Command
--> is about 3,6 MB
Pocket Plus
--> Don´t know
nPOP
--> about 220KB
MorphGear (game emulator)
--> Don´t know
PocketTV
--> about 800KB
PocketDiVX
--> about 100KB
vxUtil
--> about 100KB
AIM (I think is included on most wm2k3 roms)
--> Don´t know
MSN messenger is installed.....
PhonExt
--> about 100KB
HTH
Stefan
Re: Anyone plan on putting the new ATT wm2k3 ROM in a kitche
LumpiStefan said:
Maybe you can send me the software and i´ll take a look at it....
Regards
Stefan
Click to expand...
Click to collapse
if i send u sum software, would it be possible to load it in a rom for me?...but im waiting 4 TMO's final....i dont even wanto bother with ATT's 4 now
i have a buncha progs 4 pocket pc
thanx
updating a rom version R.20.11 Eng
Need to updated pw10b1 sx56 with rom version r.20.11 Eng
radio A.20.10
to ppc 2003 any help on best procedure.
I am new in this forum looks great..
thanks
Siemens website upgrade
http://www.my-siemens.com/MySiemens...D%2FHD%2FSX56POCKETPCPHONE%2Fdanda%2F,FF.html
this the link that siemens suggests for a free upgrade but when i try to run the software it gives me a wron version comparison and quits..
any susgestions?
Re: Siemens website upgrade
makis said:
http://www.my-siemens.com/MySiemens/CDA/Index/0,1046,US_en_0_product%253AMW%252FHD%252FHD%252FSX56POCKETPCPHONE%252Fdanda%252F,FF.html
this the link that siemens suggests for a free upgrade but when i try to run the software it gives me a wron version comparison and quits..
any susgestions?
Click to expand...
Click to collapse
You need the XDA-TOOLS with adaptrom to use it....
But be sure to do not install the RSU Upgrade since it is for 900/1900 MHz GSM and will destroy your GSM if its "only" a 900/1800Mhz unit...
HTH
Stefan
thanks a million
where do i get the xdatools i tried the link did not worked.
how do i know the units specifics.. looks in the back i have PW10B1
inside the data r.20.11.eng rom date 06/05/03
radio version A.20.10 protocol 324e4
I used the wallaby bootloader and by using the contact button i was able to backup CE ROM TO SD AND BOOT TO SD ofcourse i lost all info in my phone and my sd card ... now when i roobot it wants to format the card .. but i said no...any suggestion how to bring this baby to 2003 since all info is gone now...and also how do i keep this info stored in my 256k card for future use.... :!: :?:
Thanks again for your super quick reply....
did find Xdatools after all and all other ones
Now is the big moment.
let see if i can smoke my PPC..
Related
I have OZONE PPC2003 ver 3.04.00 and radio ver 4.21.
What are the most up-to-date reliable versions now that can be upgraded using the SDROM method. If you have links to these ROMS please let me know also.
I would suggest a 4.00.05 based ROM from thisROMkitchen.
Why wouldnt you use 4.00.10??
jason.moodie said:
Why wouldnt you use 4.00.10??
Click to expand...
Click to collapse
Because when I posted it 4.00.10 wasn't in the kitchen yet...
So is 4.00.10 as stable as 4.00.05 then ?
Also I have seen people saying they cannot get a signal when using Orange with this rom, anyone got any experience with that ?
Cheers
Swifty said:
So is 4.00.10 as stable as 4.00.05 then ?
Also I have seen people saying they cannot get a signal when using Orange with this rom, anyone got any experience with that ?
Click to expand...
Click to collapse
Well, I'm not on Orange, so I wouldn't know, but they both work for me.
I don't easily envision provider-related differences in signal reception between PDA ROM versions, this would be more of a thing that would depend on RSU (Radio Stack) version in my mind.
As for upgrading from .05 to .11 (or 10 to 16), I would say the differences are pretty minimal, I still use 4.00.05 on the phone I actually use, and I see no real difference with the 4.00.11 on my experiment-phone.
@Peter Poelman
Have you experienced any of the SD card erasures yet?
valheru said:
@Peter Poelman
Have you experienced any of the SD card erasures yet?
Click to expand...
Click to collapse
No I haven't. But I must say my large 128 MB Sandisk is not often in there these day, I usually have an 8MB with the write-protect on in there because I often need to re-install something we're working on, and I don't want the automatic delete of the CAB files.
Rom update to 2003
:idea: :?: Would you advise to upgrade from the developers rom to a kitcken cooked rom 2003? If so, version wm2003 .05 or .11 (I live in The Netherlands)
I tried it once but then my XDA, when turned off, did not react anymore to my on-switch-button, also at one time the divice told me that I had insufficient memory on my SD card, which had in fact still 180MB' left, saying it was locked. Eventually found the rom kitchen for the 17.03 version. And was lucky to be able to downgrade it again..Had to reinstall everything and had to format my SD card. What a bummer....
I reackon it was due to software faulty installation???
When using the wm .05 on your device, did you encounter such an event?
I miss the 2003 dual function of my speaker-button and the extra features on the mailer (listing contacts on tapping just a few letters) and the calender extension on the today sceen....
When backing up, installing the ROM wm2003, pending your advice, and recover.... should everything work as it will now?
Awaiting your responce...
Greetings
I have the AWS WM2003 upgrade (NK.NBF) and I'm trying to find a way to convert it to an nb1 file to write to SD so I can load my new rom. I have the 4.00.05 ENG right now, and trying to run the utility generates that I dont have a compatible version to upgrade from.
Any ideas? (sorry I'm still a little new to this)
SquiSh said:
I have the AWS WM2003 upgrade (NK.NBF) and I'm trying to find a way to convert it to an nb1 file to write to SD so I can load my new rom. I have the 4.00.05 ENG right now, and trying to run the utility generates that I dont have a compatible version to upgrade from.
Any ideas? (sorry I'm still a little new to this)
Click to expand...
Click to collapse
Which Version is the AWS WM2003?
Normally yo should be able to do this with the XDA-Tools
Take a look at
http://forum.xda-developers.com/viewtopic.php?t=4865
NBF means, that the file has the rom (.nb1) and the bootloader (.nb0) included...
HTH
Stefan
ROM version A.30.07ENG Radio version A.33.02 Protocol v 1.3.3 So I should just be able to copy just the NBF to the SD card and then run bootloader?
yes, the xdatools will detect what type of file you have. and process it accordingly.
what are those rom versions??
I am not familiar with those rom and radio versions. are you sure they are for xda 1. They may be for xda 2 and this is why you cannot install them.
For xda 1 the latest rom released i know about is the one by tmo 4.01.00 and the latest version of radio stack for A devices is 3.25.01. for B type devices I am not sure but I think it is 6.24
This is the pre-release ROM and radio stack for the AWS Siemens SX-56 (XDAI). They are due for release on the 30th of this month from the Siemens website. If anybody wants it, give me a good FTP site to up it and I'll be glad to up it there!
Just wanted to let everyone know the flash went flawlessly, and I'm now enjoying using my AWS WM2003 ROM! Thanks for all your assistance and for having this forum available!
SquiSh said:
This is the pre-release ROM and radio stack for the AWS Siemens SX-56 (XDAI). They are due for release on the 30th of this month from the Siemens website. If anybody wants it, give me a good FTP site to up it and I'll be glad to up it there!
Click to expand...
Click to collapse
btw, if you wanted you can upload it to my ftp server,
located at ftp.weezer-dc.net @ port 1234 (important)
login with username "look"
and password "upload"
Than just drop the files in the folder "upload"
Weezer, its on its way up to your FTP now.
Weezer-DC said:
SquiSh said:
This is the pre-release ROM and radio stack for the AWS Siemens SX-56 (XDAI). They are due for release on the 30th of this month from the Siemens website. If anybody wants it, give me a good FTP site to up it and I'll be glad to up it there!
Click to expand...
Click to collapse
btw, if you wanted you can upload it to my ftp server,
located at ftp.weezer-dc.net @ port 1234 (important)
login with username "look"
and password "upload"
Than just drop the files in the folder "upload"
Click to expand...
Click to collapse
Tried to download, but getting permisson denied...
Please share it with us all......
Regards
Stefan
LumpiStefan said:
Weezer-DC said:
SquiSh said:
This is the pre-release ROM and radio stack for the AWS Siemens SX-56 (XDAI). They are due for release on the 30th of this month from the Siemens website. If anybody wants it, give me a good FTP site to up it and I'll be glad to up it there!
Click to expand...
Click to collapse
btw, if you wanted you can upload it to my ftp server,
located at ftp.weezer-dc.net @ port 1234 (important)
login with username "look"
and password "upload"
Than just drop the files in the folder "upload"
Click to expand...
Click to collapse
Tried to download, but getting permisson denied...
Please share it with us all......
Regards
Stefan
Click to expand...
Click to collapse
Look in the new folder pocketpc
also, you need to login with,
poketpc as username and xda as password.
This forum software makes it XDA, but it have to be all lowercase, x d a
Ok. Seems to be working...
Thx a lot...
Stefan
Weezer-DC said:
This forum software makes it XDA, but it have to be all lowercase, x d a
Click to expand...
Click to collapse
I knew there had to be a disadvantage to my encyclopedia scripts... :|
Peter Poelman said:
Weezer-DC said:
This forum software makes it XDA, but it have to be all lowercase, x d a
Click to expand...
Click to collapse
I knew there had to be a disadvantage to my encyclopedia scripts... :|
Click to expand...
Click to collapse
LOL :lol:
SquiSh said:
ROM version A.30.07ENG Radio version A.33.02 Protocol v 1.3.3 So I should just be able to copy just the NBF to the SD card and then run bootloader?
Click to expand...
Click to collapse
hrm are u sure the radio version is a.33.... also did u get a chance to upload the radio upgrade too... did u see any benifits in signal strength or reception after the raedio upgrade..
ok, i have installed the special edition rom for my xda1 and its a definate improvement over the original rom..
but i noticed that the window mobile 2003 upgrade is available from o2 and wondered whether it was significantly better than the special edition?
of course, if there was a xda-developers special edition rom based on wm2003 that would be the best solution... :?
Nas
There are many WM 2003 ROMs and most of them works quite fine ... try the kitchen at www.yorch.net or http://lumpistefan.dyndns.org/
nasman said:
but i noticed that the window mobile 2003 upgrade is available from o2 and wondered whether it was significantly better than the special edition?
Click to expand...
Click to collapse
Where is the WM2003 upgrade from O2??????
Give me alink to download please...
Stefan
I didnt know there was one, anybody else seen it?
nope i cant see it.
my bad
soz, not from o2, just the ones from other providers that are floating about.
Re: my bad
nasman said:
soz, not from o2, just the ones from other providers that are floating about.
Click to expand...
Click to collapse
Just do it, upgrade it! I upgraded my Siemens SX56 with AT&T to 2003 and than cooked the rom from Yorch to unlock. By the way, it is a very good rom, thanks Yorch.
I did it with SD cards one of my XDA's, it worked perfect and quick: saved 2003 rom on one card, cooked Yorche's on another. The saving and installation was done through the bootloader as discribed in the proceedures in frequently asked questions section. The extracting and saving of Yorche's rom was done through OSImageTool in XDAtools into an SD card inserted in a USB card reader/writer (Inland 9 in 1 card Reader/Writer, $10 at Micro Center). The battery was fully charged on my SX56 and the flashing of rom's back and forth was done without the XDA being pluged to power unit. I tested the unlocking with a T-Mobile card, it recognised it, I made some phone calls with no problems, kept Yorch cooked rom for two days to get to know it and then flashed it back with my SD saved 2003 rom in my friends apartment just to show off how easy it is to flash the rom. it worked very well (it took about 5 minutes).
The 2nd SX56 was done all through ActiveSync with the XDA and card reader/writer pluged in and all synchronised (allscreen savers, power savers etc on PC and XDA OFF and battery charged). This XDA still had the original 2002 rom. The unlocking went very smooth. I did a full back up of the rom with ActiveSync. Since the cooked rom is PW10A1 and mine was PW10B1 I needed to get back my original rom to the XDA. The restore didn't work because it is a different partnership. So I flashed it back with my SD saved 2003 rom in a card reader/writer and OSImadeTool through ActiveSync. Everything was fine all the way to hard reset. I waited a minuteor so and did a hard reset and nothing happened, did it couple of times, nothing. It would not restart. I pressed the power botton and it went to bootloader mode. I did soft reset and the unit goes blank, dead. So I inserted the SD card with my 2003 rom into the XDA's memory slot and did the the bootloader mode, it took it, I flashed it. And now I have my 2nd SX56 with 2003 rom and the old radio stack ulocked working like a champ. I tasted with T-Mobile card and it works instantly, no configurations needed. Now I have to do a complete upgrade.
After all I like the new 2003 better but with some of the programs from Yorch Kitchen rom, which I installed and they work fine.
You, ladies and gentlemen, at XDA-Developers are the greatest thing that happened to the mobile devices community. I honor you and thank you. And Peter Poelman, you are the wizard, thank you.
John
can you guys show me how to cook to ROM or and link to download the file upgrade from wm2003 to 2003. Thank a lot . I'm using O2 XDA 2002
tommy_kiss79 said:
can you guys show me how to cook to ROM or and link to download the file upgrade from wm2003 to 2003. Thank a lot . I'm using O2 XDA 2002
Click to expand...
Click to collapse
Look here for the answers:
http://wiki.xda-developers.com/wiki/FAQ
and here to cook the rom:
www.yorch.net
check what you want or don't want and click Build ROM now, after it is done click Download. Before you build and download choose which file you want, exe or nb1. What ever you do backup your original rom preferably and safer to an SD card either through OSImageTools in XDATools and ActiveSync or the mode and the SD card pluged into your XDA
bootloader, and read the forum in details...
The new Mobile 2003 you can get at any of the provider or manufacturer of XDA's: www.T-Mobile.com, www.ATTwireless.com, www.My-Siemens.com, Microsoft has a list of manufacturers that have upgrades - www.microsoft.com/windowsmobile/resources/
Make sure you use the right one for PW10A1 or PW10B1 what ever your device Model No. is...
Good luck, John
saracen said:
The new Mobile 2003 you can get at any of the provider or manufacturer of XDA's: www.T-Mobile.com, www.ATTwireless.com, www.My-Siemens.com, Microsoft has a list of manufacturers that have upgrades - www.microsoft.com/windowsmobile/resources/
Make sure you use the right one for PW10A1 or PW10B1 what ever your device Model No. is...
Click to expand...
Click to collapse
John (and any others out there),
I hope that I'm not asking something here that is covered in some faq on this board and I think I've read them all, but...
I see mention of a lot of versions. 4.00.21, 4.00.01, A30.05, A30.09 etc...
Is there someone that can tell us new guys a little more about these? IE, what is it exactly, 2003, 2002, beta, final, alpha?
I recently bought a Wallaby, and want very much to use the MS Voice Command. Therefore, I have a definate need for a 2003 rom. I have read and reread the forums here and have a good handle on how to flash my rom, but I'm so confused as to what the best (read most reliable) rom to install, as well what radio version would work with the given rom choice. I'm not necessarily asking for a recommendation, but perhaps a nudge in the write direction.
Sorry to dump on you in particular, nothing personal either mind you! It's just that I'd love to read a FAQ for the different versions and what might be expected from them I guess. (I hope like heck I'm making sense here!)
Thanks!
Larry
Hello,
Actually, the only difference between ROM versions is bug fixing with newer versions, but the only significant factor is whether it's PPC 2002 or WM 2003 ROM.
For upgrading, I may recommend TMO 4.01.00 (my personal preference) or A30.09 (with a minor sound issue). If you need to unlock your device you must start with PPC2002 3.17 ROM first then select any WM2003 later.
There is no connection between the ROM and RSU. However, the RSU is the most sensitive part in the XDA. If you have a functioning RSU ... do NOT touch it!!
Last, get a SD card and take a backup ... it's safer and you can use the SD to upgrade as well.
Good luck ...
This is to Larry,
All these replies take you through the right directions. I have two Siemens SX56 devices with AT&T Wireless, both PW10B1, Pocket PC2002 (Ver. 3.0.12039), ROM Ver. A.20.17 ENG, RADIO Ver. A.20.10, 32MB Rom.
1st one I upgraded the day AT&T and Siemens released the Mobile 2003 free upgrade. As much as people complained, cursed and were distroying there SX56 devices ( what I read on AT&T forums) I never had any problems, and as a matter of fact the more I used the device the better it became. I played with it for about two weeks and then I decided to unlock it. So I placed my SD card into the SX56, started the bootloader, downloaded the original 2003 Rom image, soft reset the device. I cooked the Special Edition Rom based on 3.17.03 O2 ROM in Yorch Kitchen, I built the nb1 file, I downloaded, extracted with WinZip, put it on another SD card, put the card in my SX56 device, started the bootloader, flashed it, did a hard reset. It didn't ask me if I wanted to unlock it but the XDAunlock program was there, I taped it, it asked me if I want to unlock, I did. I checked it with a T-Mobile sim card, made a phone call with no problem (I tested with the same card before and after, before asked me for the pin number and after it logged in to T-Mobile network). I used it with the Special Edition Rom for about a week to see which programs I liked and wanted to install on my device after I flash back to saved Mobile 2003 Rom. I flashed it back with the 2003 Rom image. I was on the road, away from power supply, my pc, usb ports etc. Just the unit with its battery charged up, the SD card and the bootloader. It took 5 minutes.
My 2nd SX56 device I did before the 2003 upgrade, the original 2002 still there, with ActiveSync, OSImageTool in XDATools, SD cards, card reader/writer and nb1 file. This time I overlooked the saving of the original 2002 Rom and it went directly into the flashing with the Special Edition Rom cooked in Yorch Kitchen. I unlocked it, tested with T-Mobile sim card and flashed it back with the the Mobile 2003 Rom image saved from my 1st SX56 device. It didn't want to wake up after the hard reset. It kept going to the bootloader mode. So I inserted the SD card into the SX56, started the bootloader , flashed it back again with Mobile 2003 Rom, did a hard reset. It worked. Now I have my 2nd SX56 with new mobile 2003 Rom but old, the original Radio Stack from Pocket PC 2002. It works fine. The working is like the Upgraded 2003 device. Maybe with the older radio Stack is more stable on the signal, and I don't know for sure because I did not tested, only what I read and the people having problems. My preference is a total upgrade, the Rom and the Radio Stack, I noticed that the audio quality is better with the total upgrade, specialy when on the speaker phone during a phone call.
What ever you do save the settings and the Rom images and you do the right PW10A1 or PW10B1 (the Special Edition Rom is PW10A1). Make sure all the screen savers, power savers, sleep modes etc. are turned off on both the PC and the XDA device.
Good luck, John
saracen said:
What ever you do save the settings and the Rom images and you do the right PW10A1 or PW10B1 (the Special Edition Rom is PW10A1). Make sure all the screen savers, power savers, sleep modes etc. are turned off on both the PC and the XDA device.
Good luck, John
Click to expand...
Click to collapse
Thanks, guys!
I kind of knew that the differences were a matter of bug fixes, what I wasn't sure of is which is 2003 or 2002. I'm going to keep reading here of course. This is a fantastic site to be sure!
So, bottom line is I guess I'm just going to pick a couple of them and flash them and play with them so which works the best.
Many thanks again guys! Larry
Larry,
Yes, exactly. I forgot to say that my new rom is an AT&T- Siemens: ROM Ver. A.30.09 ENG, Radio Stack A.33.02. The previous Rom version had a band switch (900 for Europe or 1900 for Americas) in the Settings and under Phone but now with the new it has an auto configuration which I like better. I can always search the network manually. By accident I found that if you set it to manual and don't have a network specified or any signal strength showing as long as the phone is turned ON, I can still get on Internet.
Good luck, John
One final ?
Guys
Is there ANY version of the W2003 ROM that comes with the Wmodem (or similar) application ?
I first came to xda-developers when I was trying to use my Qtek as a modem....thereafter we saw the O2 and Qtek PPC (2002) upgrades that brought in the Wmodem utility.
That seems to have disappeared off the priority list for most people these days, though.
Cheers
Sands
Sandyind said:
That seems to have disappeared off the priority list for most people these days, though
Click to expand...
Click to collapse
IMHO, the new PCs/laptops with either built-in WiFi or WLAN functions or with equivalent PCMCIA cards, or even with SIM module inside, made it out of the wishlist
Re: One final ?
sandyind said:
Guys
Is there ANY version of the W2003 ROM that comes with the Wmodem (or similar) application ?
Click to expand...
Click to collapse
The German Version 4.00.33 from t-mobile comes with the wmodem application
HTH
Stefan
Stefan,
Is there an English version of Mobile 2003 with wireless modem for PW10B1 XDA?
Thanks, John
Can't receive USA Cingular signal 850mhz- Help Anyone?
I've posted on some other forums but no-one seems to have an answer. Can an unlocked AT&T SX56 be adjusted to work on the Cingular 850mhz system?
Help!!
Doc
I have just got my xda back from being fixed by O2 and they seem to have upgraded my rom.
Before I sent the xda to them the rom was simply the latest ppc2002 rom from their website.
However now everything has changed and my rom version is 4.01.12 ENG
This seems to be an official release form O2 as I have their auto configuration and boot screen.
My bootloader has also been upgraded to V5.22.
I have backed up the rom using XDATools and hope to upload it to the site although its approx 31mb.
This seems to be all official and what everyone has been waiting for however if i've completly missed the point please let me know (politely please )
As an added note I have two broken xda's for sale: -
1) A 64mb XDA with the above rom installed. The screen is smashed, and will need replacing, or you could just use the motherboard in another xda. The unit does not charge for some reason, possibly the fuse which is a simple enough fix.
2) A 32mb XDA with the above rom installed. The screen is intact, however will most of the time it will only display lines, you can get a screen sometimes but this is very rare. It must be possible to fix this, but its way beyond me. Again the motherboard has been tested in my other xda.
Please email me at [email protected] if you would like to make me a serious offer.
Thanks
Martin.
So how do the rest of us get it. Do we have to send our XDA's back to O2?
So did you uploaded the ROM yet? can you provide us a link? thanks
::adit
Don't forget the main question. Does this version incluudes the wmodem application????
Already wrote him a PM for getting this ROM. My Kitchen is waiting for it....
:wink:
Stefan
:twisted: :twisted: Yeahhh gr8 I hope this one would be perfect I want to try it
news?
any news,
wmodem, build number ...
i´m ready to give it a try
joking ?
is topic joking ? o never heard before about 4.01.12 rom best regard
i WAS starting to think that this guy is telling the truth but no sign so far... damn, all that excitement for nothing
::adit
unfortunately
after one day of hopes that´s it.
at least someone with inside o2 info can confirm/infirm the existence of an O2 WM2003 either in beta fase?
Official O2 PPC 2003 4.01.12 ENG ROM
Official O2 PPC 2003 4.01.12 ENG ROM
The file as promised.
The programs on it are: -
Games
Jawbreaker
Solitare
Programs
Calculator
ClearVue PDF
ClearVue PPT
File Explorer
Microsoft Reader
MSN Messenger
Photo Contacts
Pictures
Pocket Excel
Pocket MSN
Pocket Word
SD Backup
SIM Manager
SIM Tool Kit
Terminal Services Client
Wireless Modem
xmail from O2
Settings
The usual settings including
O2 Auto Configuration
Hope this is what your all after, let me know.
thanks for the file, sorry bout my doubt but it took so long.. so anyone tried this yet? does it work with asian XDA1? im still downloading it. it will take some time for me coz im using dial up thanks.
::adit
great !
it IS real :shock: thanks Martin
how on earth we only found out right now ?
any insiders ? is it gonna be official or it's an old tryout from O2 ?
It HAS wmodem but I connect through Irda (i have no serial on my notebook).
Can someone try and confirm that it works on Irda on Windows XP
Steps for using wmodem:
1. install ircomm2k from http://www.ircomm2k.de/english
2. add a new modem (manual selection Standard 32600 bps) on the new com installed by ircomm2k
3. add to AT commands AT+CGDCONT=1,"IP","apn","",0,0
4. create a new DUN with the number at *99#
5. use if there is any username/password
Mine works fine but I cannot connect. It does communicate and ends on "verifying password" step.
Any help ?
thats great!! thanks very much martin,what about the auto config? does it show any asian provider? such as thailand AIS, DTAC or indonesian indosat, telkomsel, etc? thanks in advance...
adit said:
does it show any asian provider? such as thailand AIS, DTAC or indonesian indosat, telkomsel, etc?
Click to expand...
Click to collapse
Shure not....
Would you as provider support other ones?
Incluuded in Auto Conig should be:
O2-UK
O2-IRL
O2-DE
O2-DE Loop
O2-NL
???Manx???
and again Thx to Martin for sharing and uploading....
HTH
Stefan
breaking news )
Ok everybody.
Install this ROM ... then ... click on SIM Manager
THEN .... surprise ... it will install IA Caller ID (customized picture of the calling person)
This is indeed a surprize.
Thanks O2
Re: breaking news )
decebal said:
Install this ROM ... then ... click on SIM Manager
THEN .... surprise ... it will install IA Caller ID (customized picture of the calling person)
Click to expand...
Click to collapse
Normally this should happen Automaticly, since the CallerID.CAB fiel is int eh startup directory....
But it's a nice trick to get it working...
[edit]
Soory, forgotten to mention, that this ROM is now available in the Kitchen. I also tried to get the Autoconfigration working. Cooking went fine, but i didn't have the possibility to test it.
So fell free and test this ROM with Autoconfiguration......
Check http://lumpistefan.dyndns.org
[/edit]
Stefan
great !!!!
i test it in this afternoon it have a bug in this rom .... may be A30.09 much more better thx for kindly
martinbickley
ps. i check in rom update O2. it have 3.17.03 only where is 4.01.12 come from ? ....
Whats wrong?
Hi, i just installed the ROM and now it works perfectly well, caller ID installs automatically at the startup when the welcome screen appear after the upgrade? XDAMAN, what was the problem? i am using DTAC provider (okay, theres no autoconfig so i had to set up everything manually) everything works perfectly well? i feel its a lot more faster than other ROMs i tried (Siemens ROM, T-Mobile, betas, etc) the best ROM i've ever used!thanks again martin
::adit
too slow and unstable for me
hello adit ,, i live in bangkok too <<< may be we can met and talk about xda ( i have a lot of program for u ...free hehehe )
i decide to cook this rom from stefan kitchen ... and it's no have bug anymore ... Great . i garantee it.
but i didn't check battery lifetime .. who can tell me . is 4.01.12 better than other rom .. ?
ps adit please u email to me at [email protected] ? may be i have a new xda user friend... : )
I'm really in love in this forum :lol: Thanks to Martin for uploading this new Rom and to Stefan for the hard work on his Rom Kitchen.
By virtue of my 2 x XDAII's failing for whatever reasons (abuse, long-life, etc.), I had to shift to one of my XDAII's (BA) with base OS:
=======================================
WM2003 SE
Version 4.21.1088 (Build 15045.2.6.0)
Processor: Intel(R) PXA263
Memory: 125.77 MB
ROM v.: 1.40.00 WWE
ROM date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM v: 1.40.923 WWE
Model No.: PH20B
=================================
I have found that this phone is WAY SLOWER than the XDAII - it's really incredibly slow! (And I had my XDAII with less RAM available!)
I have had problems connecting in Mumbai (India) with Vodafone (this happens with other units (EDGE modem/XDAII) too, but this is *extreme*!
I have to shut off the radio (put into flight mode) then back on, in order to connect to GPRS, or it simply will not connect!
I have tried flashing the ROM for the radio to 1.15, but I have to edit the file on the unit, else I get the error - it's really very time-consuming!
I'm afraid that all my time that I put into this unit will go to waste if I do not have a stable unit that I can rely on....
Any feedback on this?
Thanks!
Try the T-Mobile's rom or PDA2K's rom in Blue Angel Upgrading section.
The O2 rom bugs me too much.
Also install O2 Asia upgrade (I guess u r running a non asian one thats why BA isnt showing compatibility with ur network. Try upgrading to WM5/6 and see if u have luck on GSM/GPRS since majority of asian networks phail with BA WM5/6/6.1/6.5
dark_prince said:
Try the T-Mobile's rom or PDA2K's rom in Blue Angel Upgrading section.
The O2 rom bugs me too much.
Click to expand...
Click to collapse
Yes, it's the O2 ROM - not sure if this one was the one I bought in SIN or in the UK...any ideas, or way to tell?
Both were O2 branded....
dark_prince said:
Also install O2 Asia upgrade (I guess u r running a non asian one thats why BA isnt showing compatibility with ur network. Try upgrading to WM5/6 and see if u have luck on GSM/GPRS since majority of asian networks phail with BA WM5/6/6.1/6.5
Click to expand...
Click to collapse
Which is the best upgrade (simplest) to do, stable, with almost no bugs, with a similar to original config/options?
TIA!
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
xplode said:
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
Click to expand...
Click to collapse
Wow - thanks for the tips - wonderful to have the gurus of the BA helping us!
So, how does one delete the radio files?
I unzipped and extracted, then ran the .exe file, which started the RUU update.
xplode said:
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
Click to expand...
Click to collapse
explode... i have 02 XDAIIs, what your advice for ROM on my IIs? and btw i cant expand my extrom to 128K using tools on XDA-DEV (extrom_unlocker.cab and Repart_doc.exe) had any idea?
Stevo.Mksr said:
explode... i have 02 XDAIIs, what your advice for ROM on my IIs? and btw i cant expand my extrom to 128K using tools on XDA-DEV (extrom_unlocker.cab and Repart_doc.exe) had any idea?
Click to expand...
Click to collapse
Why can't you? Keep in mind that you can only do this only in 2003. So, from what I have read in your other posts you are either in 6.1 or in 6.5 (going back to 6.1). You have to use the Repart_doc and the ExtRom Unlocker tools in order to do so.
Aside from everything, I have been using xplode's version of 6.5 and I am pretty happy with it (both stability and usability)-wise.
If you are absolutely disgusted by it, you should try sun_dream's 20578. Best 6.1 that I have had...
Hope this helps.
@egzthunder1: did back to original rom wm2003 02XDAIIs and other cooked rom in wm2003, but it failed due to physical logic reason when im runnig repart_doc.exe. but when im expand my SX66 its work!! weird thing.
Stevo.Mksr said:
@egzthunder1: did back to original rom wm2003 02XDAIIs and other cooked rom in wm2003, but it failed due to physical logic reason when im runnig repart_doc.exe. but when im expand my SX66 its work!! weird thing.
Click to expand...
Click to collapse
That is the weirdest thing... it should work fine since it is the same phone...