Does anyone one know how to integrate Mobilejustice into a ROM. I have seen a few threads regarding wm5 but none for wm6.
Thanks
After a lot of reading on these forums and a fair few ROM updates ive managed to add a fully working OEM of mobile justice to the polaris shipped ROM.
Could you explain how?
Thanks!
rad-misu said:
Could you explain how?
Thanks!
Click to expand...
Click to collapse
He can't. He's Bluffing. Look at his signature.
Hi
Whats up with my signature
First you need to finish creating the mobile justice OEM ready to be added to your rom. Ive attacted my OEM without the settings (mjc.bin) file included as thats only relevent to my polaris.
To create OEM
1 Install and fully test mobile justice with the settings you want to use because once its been added to your new rom you will not be able to make any changes.
2 When your happy with you settings find the mjc.bin file in your windows and save it to your pc.
3 Extract the attached setupMJustice folder and add the mjc.bin file.
You have know created the OEM ready to be cooked.
I used the KaiserKitchen software to add my OEM to the ROM which you can get from here http://forum.xda-developers.com/showthread.php?t=343044
Also look at
http://wiki.xda-developers.com/index.php?pagename=OEM Package Tutorial
Dont have time tonight to wright a full description on how to extract, cook, build and then flash a rom. But if anyone needs some instructions i'll post them tomorrow.
Hawk
why is ROM integration better than normal installation?
Normal installation can be easily removed but if it cooked into the ROM only a reflash will remove it. It just makes it a little harder for a thief to know its installed and try to get rid of it.
Hello, I go to this - http://linuxtogo.org/~htcpxa/htcuniversal/index.html - webpage, and I find old version of Linux distribution. They all start on my QTek 9000, but I'm not able to make call with none of them (apparently for them there's no network...). So, do you know where to find newer versions, that might have better driver support? I'd also like to see more versions that would be able to run from image files, rather than partitions...
Thanks
P.S.: Of course I tried to contact the guys at linuxtogo.org, both by e-mail and by IRC, but so far I've had no answer...
Hello,
yes, basically I am hoping someone could provide some information on how to create or at least modify a cooked a rom Like the Russian rom or the one from pdaclan specifically for the HP iPAQ 614c/612c.
I would like to make modifications to the existing 614c roms and re-build a flashable flash.dio. I've already bricked my iPAQ once and would like to avoid going thru that pain again.
I want to be able to do the following:-
1-
Example, the Chinese rom has a nice feature showing the battery status in percentage, I think thats the Windows\battdrvr.dll that is responsible for this, I'd like to learn how I can extract that file and integrate it with another Rom.
2-
The Chinese rom has some Chinese left overs so If I knew how I can rebuild the flash.dio, I could overwrite those file from the English one and fix the Chinese rom myself.
3- I would like to dictate what software I want to install as part of the rom.
I don't know where to begin, most of the information related to this PDA are either in Chinees or Russian and I am still a newbie.
I am sure if someone posts some tips, I can get started.
please share your knowledge, I am sure a lot of use would find this info useful.
Regards
Should i use the NEW ORIGINAL X2 ROMS + Extracted CABs after flashing or should i use it as a update.. I don know how dumb it is but just want to know...
I also would like know if i can directly download it and install it. is there any guide to it ?????
Some one please guide.. the whole of my xperia is just looking absurd.. i would like to know how to install the NEW ORIGINAL X2 ROMS + Extracted CABs
you cant? so dont do it... i isnt necessary for you
Hi sorry, i didn't actually want to do it, but the problem is am having a problem with everything.. i tried the accelerometer software given here, yet the main screen(not the windows menu) is not rotating.. The other thing is that the menu is not customizable. i can't remove the items that i want in the menu.. how could i do that...
Thinking of a new method of installing AoW, and I think I have found a way to install AoW without the Dev update on the latest release of W10M.
How many of you would want something like this done? It would require full interop/cap unlock with 1st/2nd/3rd party permissions unlocked as well using the Root Tool.
I am starting research on this now to see if it is worth while.
Let me know peeps!
If this would manage to skip the device hardware check and allow us to run project astoria on 512MB RAM devices then I am really interested and ready to test.
Thanks, I am still doing a lot of research to see if this is even possible, but I have the AoW files for P.A. I just need to figure out the registry entries, and where each file goes.
Might be awhile, but I will let you know when I have an alpha installer.
sandix said:
Thanks, I am still doing a lot of research to see if this is even possible, but I have the AoW files for P.A. I just need to figure out the registry entries, and where each file goes.
Might be awhile, but I will let you know when I have an alpha installer.
Click to expand...
Click to collapse
I already tried adding the files and registry entries myself, some of the registry entries can't be written, at least not by any registry editor released until now, also did the downgrade and update with an other device's entries trick to try to enable it so I now seem to have all the aow files in their place and the entries are also there (at least the entries I know about) yet it doesn't work so at least for users of devices with 512MB RAM this might not be possible (I think that somehow the android build/hyper-v implementation/something else check the hardware and don't allow it to boot on 512MB RAM).
I am still willing to test but I think that even if you manage to find and write all the registry entries you might need an other tester with a (hardware wise) better device to actually find out if it's working or not.
Ranomez said:
I already tried adding the files and registry entries myself, some of the registry entries can't be written, at least not by any registry editor released until now, also did the downgrade and update with an other device's entries trick to try to enable it so I now seem to have all the aow files in their place and the entries are also there (at least the entries I know about) yet it doesn't work so at least for users of devices with 512MB RAM this might not be possible (I think that somehow the android build/hyper-v implementation/something else check the hardware and don't allow it to boot on 512MB RAM).
I am still willing to test but I think that even if you manage to find and write all the registry entries you might need an other tester with a (hardware wise) better device to actually find out if it's working or not.
Click to expand...
Click to collapse
Well I have a Lumia 640 which is not supported yet, but will be in the future. 1GB RAM Quad-Core
i can test if you want i have a lumia 625....
UPDATE: I think I am getting close to a solution. if someone who has astoria on their device already could you rip all the files from "C:\Windows\System32\aow" from your phone, zip them up and send them to me in a private message? It would be of GREAT help to make sure I have the latest files.
Thank you.
Old post, but I'm interested.
I have the files, go pm.
I would venture to say anyone with a high spec windows 10 mobile device is extremely interested in this. I think heathcliff is researching this. if astoria could be ported to the latest build of windows 10 mobile..
barc0d3 said:
I would venture to say anyone with a high spec windows 10 mobile device is extremely interested in this. I think heathcliff is researching this. if astoria could be ported to the latest build of windows 10 mobile..
Click to expand...
Click to collapse
I made some tests but I was stuck on adding new values in registry.. But I had all the values to put and all the files and other modifications
valentinbreiz said:
I made some tests but I was stuck on adding new values in registry.. But I had all the values to put and all the files and other modifications
Click to expand...
Click to collapse
Realistically this would only work on Nokia, which requires a special DLL to be used in the project to set/create registry items.
sandix said:
UPDATE: I think I am getting close to a solution. if someone who has astoria on their device already could you rip all the files from "C:\Windows\System32\aow" from your phone, zip them up and send them to me in a private message? It would be of GREAT help to make sure I have the latest files.
Thank you.
Click to expand...
Click to collapse
You need a lot more than that, me and other people are working on this. I already pushed all the astoria files and dlls, and restored the service key and values to trigger the dlls. It needs more than that to work in newer builds, when i mean newer builds i refer to 10586.x or higher .
xxJMarian said:
You need a lot more than that, me and other people are working on this. I already pushed all the astoria files and dlls, and restored the service key and values to trigger the dlls. It needs more than that to work in newer builds, when i mean newer builds i refer to 10586.x or higher .
Click to expand...
Click to collapse
Hey thanks for the reply, I already know this, but thanks for the information! However, I have long since abandoned this project (see date of my OP and the post you quoted). Cheers!:good:
Be careful
sandix said:
Thinking of a new method of installing AoW, and I think I have found a way to install AoW without the Dev update on the latest release of W10M.
How many of you would want something like this done? It would require full interop/cap unlock with 1st/2nd/3rd party permissions unlocked as well using the Root Tool.
I am starting research on this now to see if it is worth while.
Let me know peeps!
Click to expand...
Click to collapse
Well... I have a Lumia 925 running latest Windows 10 Mobile build ever (Redstone 4) Build 15254
But be careful!
You may brick a lot of devices...
If you really want to work on this, i can give you all the files i've got on my research aswell as the registry keys that you can import with interop tools. Since i had to format my pc and such, didn't install anything related to windows phone, so i left the project in the trunk but, as i said, if you really want to work on this i can provide you with the files and keys.
Yep!
xxJMarian said:
If you really want to work on this, i can give you all the files i've got on my research aswell as the registry keys that you can import with interop tools. Since i had to format my pc and such, didn't install anything related to windows phone, so i left the project in the trunk but, as i said, if you really want to work on this i can provide you with the files and keys.
Click to expand...
Click to collapse
Well... I will take it!
Just upload it to a download server for example MEGA.CO.NZ
And and the download link to me via private messages.
If everything would succeed and I will finally make it to the finish, I will make a program that will install Astoria onto your phone via just pressing a button!
You can also check out my other software that I made and published to xda developers, I will be very happy if one of them will help you fixing problems with your phone (if you have problems of course) or installing Windows 10 Mobile onto your phone with just 3 clicks!
Good luck!
Sincerely
Gor Mirzoyan
(founder of XWintech Corporation)
(Birth year: 2005, yes I am actually 13 years old, it's not a joke)
I hope you manage to get this working!
Ever since its announcement I was hoping to see the day it gets out!
How's the progress? Nearly done?