does not vibrate - MDA, XDA, 1010 Software Upgrading

My old device, siemens sx 56 does not vibrate. I flashed its rom to 4.00.05 then to 4.01.00 and it does not vibrate in both of them. I am not sure was it vibrating on its original rom or not, as I flashed it as soon as I got it. The radio version is RA.20 and I am not sure is this from the rom or the radio stack upgrade. Can you help me PLEEEEAAASSSSSSSEEEE

can sumone help? my phone doesnt vibrate anymore...i dunno whats wrong. i have the new 2003 update OS...i think it used to vibrate...but now it doesnt vibrate at all....help plz

Related

Phone side of my XDA has mind of its own. Please help!!!!

I have problems with the phone side of my XDA.
It keeps turning off by itself every 20 or so minutes.
I have upgraded to
ROM 4.21.00 ENG
Radio 4.21.00
Protocol 32S54
Still no changes. PDA worksfine but phone still turns off by itself.
Any sugestions please.
Thanks
what's your device type ... PW10A or B (rear sticker) ? and what's the band width of your network ?
also, does the phone work fine before turning off ?
did u upgrade the RSU or the ROM only and where/how did u do the upgrade ?
It's PD10A1 originaly on O2
The phone works fine while is on.
I upgraded via ActiveSync
First the ROM and than the RSU
Both upgrades successful
Did the same before the upgrade while using Developers special ROM.
I tried all diferent options in phone setup but no change.
Any Sugestions
this may or may not be help full but when I upgraded my radio stack on the o2 XDA 2 with the I-Mate Radio Stack, OS and Ex Rom it worked fine, however when I changed the Ex Rom with the O2 Ex Rom the phone stopped working.
The work around can be seen in this forum but I cant find it at the moment. Hope this helps?

Softreset Everytime after Upgrading Qtek 1010 to WM 2003

I have sucessfuly Upgraded my Qtek 1010 with WM 2003 4.01.16 by Bootloader method Thanks to Biso007 for his help.But now when Qtek turns off after 3mins It does not switch on even after pressing Power Button i tied several times.Now i have to do Reset Everytime or uncheck the box for turning off the device.
Whats wrong what to do I miss calls now.
Can i reinstall the same ROM or any other?
Please help me to slove this issue
Thanks
using the sd upgrade mode you can upgrade downgrade sidegrade to what ever rom you want older newer or the same .......
I still recommend using 4.01.00 ROM
thanks Biso007.I want to that ROM 4.01.00 eng beta can be installed.I could not find without beta.I want install that ROM kitchn its beta.Pls help
i got mine from tmobile and pulled out the nbf file
if the latest from tmobile have a later rom then 4.01 then i used the beta
it was a nice rom
Sloved the Problem!!!
Guys!!
Dont ever add KSE True Fax while cooking ROM 4.01.16.KSE Truefax will make your device sleep and make lifetime Resoft to wake-up.

Xda Neo Hangs on incoming calls

I brought german Xda neo (Rom : 2.15.13.27 WWE). It hangs on incoming call. I see the notification screen with incoming number. But cannot accept or reject call and the phone hangs. I have to do hard reset everytime. Is there any solution ??
Is the rom correct or is there any update. Pleaseeee help.
Sameer
Hyderabad, India
look for radio rom version problems ..
Well, most easy thing to do to check whether it's the rom or not is to update to the latest qtek rom or something. If it also does it on that rom then you know it's the phone.
On the other hand, are you running any other programs that interfere with incoming calls etc? Best way to test it is with a clean install obviously.
Haven't heared this problem before, so it might just be your phone.
If your overclocking with the 2.20.7.34 ROM then you might have this problem, it took me sometime to track it down to that - Hell this baby does just fine at 195MHZ!!! Take the last posters advice and try on a 'clean' install and you shouldn't have any problems.
Is that 2.15.4.47 GER a german ROM ? i am using english version and need english rom. Well, for time being my problem is sloved. I changed my rington to simple one, removed some applications(calculator).

No Notification problem

Hi friends.Just got a new wizard for myself few days back I am sorry if this has already been covered.I have tried to search but with no luck at all.
I am facing a strange problem ever since i got the phone.The problem is that when someones sends an sms to me,i receive no notification on my phone.The sender gets a delivery report for the sms but I cannot see the sms on the phone.There is neither any notification nor is it visible in inbox.But this problem is only intermittent i.e it happens only some times.At other times,everything works as it should.This issue also happens at times when someone calls me.The phone rings at their end but i see no notification/no missed call..nothing..
Will updating Radio version help ?
Currently using:
ROM Version 2.16.9.1 WWE
Radio Version: 02.07.10
IPL: 2.16
SPL: 2.16
Any ideas ?
Thanks in advance
Upgraded to T-Mobile 2.26 with radio 2.25.11!! But Still no luck !! Anyone please ?
To me, that sounds more like a network problem than a device problem, especially since it's intermittent. You should probably call and report the problem to your service provider and see what they have to say.
The radio version seems .. not too good. What ROM are you using? try using an official ROM? Try using my version of Radio.
hanmin said:
The radio version seems .. not too good. What ROM are you using? try using an official ROM? Try using my version of Radio.
Click to expand...
Click to collapse
Exactly what i thought! I am using T-Mobile 2.26 currently with radio 2.25.11!! Just found out that i am not the only one facing the issue..Read a few threads..The next thing i am going to try is 2.19.11 Radio!!
Will report back with the result...Thanks anyways guys
Tried T-Mobile 2.19.11 radio rom along with both Black Diamond 2.0 (WM6) as well as AKU 3.3 (Farias WM5).Missed calls and smses on both Anything else to try ?
I have tried almost every possible radio rom! Could it be that my radio hardware is faulty ? Please help me..This problem is driving me nuts!!
Sorry for bumping such an old thread. Just wanted to say that I changed my sim-card and miraculously, the problem disappeared. Just posted so that it can help someone with a similar issue

Imate JAMin downgrade WM6 to WM5

HI,
I had spent lot of time searching for WM6 ROM for my imate ,while doing that I came across Qtek ROM namedas WM6 . After installing i came to know that it was a WM5 rom named as WM6. But i didnt gave up and after searching XDA i got actual WM6 rom and I uploaded it. The Version details of WM6 are :
ROM version 4.0.0.0 WWE
ROM Date 2/15/07
Radio Cersion 02.47.21
Protocol Version 4.1.13.24
Ext ROM version 4.0.0.0.3 PDAViet
But now i want to downgrade back to Imate WM5 original ROM. Kindly help me getting that done.
Thanks in advance..
Regards,
KD
i have a JaMin 2 and i wasn't able to downgrade to the original I-mate Rom but u can downgrade to the NoID WM5 which is better than I-mate Rom
the link for the NvID Rom
The below link is for the New I-mate bootlogo
http://forum.xda-developers.com/showthread.php?t=349635
Hoping this will work for u
Thanks for such a quick reply. Also i would like to know what are the steps to be folowed whiles downgrading. I mean do i run NoID ROM first and then execute Enterbootloader.exe and then Romupdate utility for my G4. Kindly excuse if u find my questions silly, since i have not much knowledge into all this and i am only being concerned about my Imate.
Cheers and thanks in advance
KD
I have the same problem...I cannot hear anything or any body can not hear me...But the thing is that the speaker does play the ringtone when sombody is calling me so the speaker is ok...PLz help..
invercargill said:
I have the same problem...I cannot hear anything or any body can not hear me...But the thing is that the speaker does play the ringtone when sombody is calling me so the speaker is ok...PLz help..
Click to expand...
Click to collapse
i also face the same problem, my rom is WM6 fantastic b4, but after few times hard reset and soft reset and leave it for overnight all back to normal again... sometimes still cannot hear the caller voice.. i just soft reset again..... still no permanent solution yet...
one of the senior member suggested to re flash the ROM... but i'm still not sure how to do it
To downgrade to WM5, follow this.
WM6 and WM5 for I-mate Jamin
Please I have I-mate jamin
I need WM5 and WM6 for it please
also if anyone have it's arabic version ..it will be better
if it's not avilable, I need it's english one
I tried many links but it is all expired or "file cant be found"
please help
thanks alot

Categories

Resources