Hope this is the correct forum... if not mods feel free to move it
Details are:
Network: o2 (UK)
Phone: XDA II
ROM: 1.60.00WWE
Radio: 1.10.00
Protocol V: 1337.18
ExtROm V: 1.60.50
I have this really annoying problem with my o2 XDA II, where I cannot reply to SMS messages without a failure.
If I write a SMS from scratch and select the contact from my contacts list it will enter the contact number as "07799123456" and the text will send without any problems.
however if I was to receive a SMS from someone and hit the reply button (like we all do) and send the SMS I get a lovely "Your SMS message could not be sent" and it goes in to drafts. When replying it would eneter the number as "Name" <+447799123456>;
Then if I go in drafts and try to send it will show the same error... and keeps doing it. So I have to CUT the text from the message, do a new message and select the contact again and send it... this was it will send the message.
Why does it do this? and is there a cure for it? Its really, really annoying.
Any help you can give will be appreciated!
thanks!
Steve McKeogh
I have the same problem occationally, for me it looks like th eproblem occurs when replying to a contact which have another operator than mine (Telia).
Message Centre
Hi there,
The problem could be occurring if you receive a message from another network. The issue is with a setting which would say "Reply using same centre". This means that the message you intend to send will go directly to the message centre of the other network. Obviously your message will not go through because you are not on that network! If this setting is disabled on the sender's phone and then you try to reply to his message you would not encounter this problem.
Hope this helps.
Cheers
Lakshman
ah right ok... bit annoying though cos I cant tell everyone I know(who has this setting enabled) to do this. There is a paticular contact it happens to and she always has a "Reply Request" enabled (i.e. on my old T-Mobile T610 it would say the user has requested a reply after i read all her messages). Could that be sumin to do with it?
Cant I change a setting on my XDA to send the message via the usual route it goes with it sends a message from scratch? This would work surely?
Thanks for your help, appreciate it!
Thanks,
Steve M
Hi my Qtek S100 sent SMS messages doesn´t display the name of people that are in my phonebook, only de number. Is it possible to show de name not the number?
Thanks
I have that too, My mda compact only shows the names when i'm replying to a message
May be you can try this when sending sms:
In the "To" field, they the name of the person you want to send, just a first few letters, the possible names will come out, then choose the right one. Doing in this way, the name and telephone number of the recipient will appear on your sms notification.
PS: I am using this for IIs.
Nop! It only shows de number wich is very bad because that way i had to remember everyones phone number... Impossible they are 800. Imagine when i send multiple sms ( i advertise my club events personally to my friends that way). Even with a 50€ phone we can do that today... And that´s so simple to fix... Hallooooooo Microsoft!!!!!!!!!! Its a shame that a so good OS like this misses so elementary issues...
leochan2005 said:
May be you can try this when sending sms:
In the "To" field, they the name of the person you want to send, just a first few letters, the possible names will come out, then choose the right one. Doing in this way, the name and telephone number of the recipient will appear on your sms notification.
PS: I am using this for IIs.
Click to expand...
Click to collapse
works for me at i-mate jam. thanks a lot for your advice
Qtek S100 doesn´t show sent SMS name only number...
Thanks it works for me too but only if i´m not typing with intellipad... I think! I allways type with intellipad
Yes, It't Ok with my XDA II mini.
Doesn't work with MDA Compact :x
Largo
Hi
try the soft in attachment it is worked with me in qtec2020
BTROLY said:
Hi
try the soft in attachment it is worked with me in qtec2020
Click to expand...
Click to collapse
Anyone try this cab with I-mate jam ?
Do u see any improvement ?
amaro_dj said:
Nop! It only shows de number wich is very bad because that way i had to remember everyones phone number... Impossible they are 800. Imagine when i send multiple sms ( i advertise my club events personally to my friends that way). Even with a 50€ phone we can do that today... And that´s so simple to fix... Hallooooooo Microsoft!!!!!!!!!! Its a shame that a so good OS like this misses so elementary issues...
Click to expand...
Click to collapse
Are your numbers stored under the "mobile" field in your contacts? not sure if this will solve your problem, but I found that when my firend's mobile numbers were stored under "home" or "business", the SMS program will not automatically detect it.
Try moving a few to "mobile" and see what happens.
Sent SMS name identification reply
The primary mobile number is always in the mobile field (that´s another estupid thing in outlook fields because several people have more than one mobile phone, for different operators and we have only one mobile field in here). But that's not the problem, intellipad finds all the number fields but when you do enter, the selected number goes to the "to" field in the message only with the number not the name. If you do the same procedure with keyboard (you begin typping the inicial letters) and a new pop up box appears with the names and the numbers, when you choose the name it goes to the "to" field with both the name and the number. To type sms messages you don´t have most of the times pacience to grab the stylus and type with keyboard, it´s a different procedure, most of the times you are on the run, that´s the concept of the sms message, a quick and practical way to contact somebody without calling...
thanks
hmm...
... strangely enough, the intellipad feature isn't working now, after having flashed to the latest Qtek 1.06 ROM :?
In the TO: field, typing letters does not seem to trigger an "auto-search"... which is what you described in your post above, amaro. This was working perfectly on my old ROM, though I did skip the auto-installation after hard reset, so maybe it has something to do with that.
never mind.. i fixed the problem with a soft-reset.
SMS sent messages again...
Kai, does the new ROM fixed the front speaker sound problems? How do you find the new ROM? Can you send sms messages with intellipad showing the reciever name and number?
Thanks
Re: SMS sent messages again...
amaro_dj said:
Kai, does the new ROM fixed the front speaker sound problems? How do you find the new ROM? Can you send sms messages with intellipad showing the reciever name and number?
Thanks
Click to expand...
Click to collapse
The new Qtek ROM works perfectly with SMS Sender display !!!
Just i tested ....
Re: SMS sent messages again...
Minotavrs said:
amaro_dj said:
Kai, does the new ROM fixed the front speaker sound problems? How do you find the new ROM? Can you send sms messages with intellipad showing the reciever name and number?
Thanks
Click to expand...
Click to collapse
The new Qtek ROM works perfectly with SMS Sender display !!!
Just i tested ....
Click to expand...
Click to collapse
How can i install the rom? Where did you get it? Is it a tricky procedure?
Thanks again
Re: SMS sent messages again...
amaro_dj said:
Kai, does the new ROM fixed the front speaker sound problems? How do you find the new ROM? Can you send sms messages with intellipad showing the reciever name and number?
Thanks
Click to expand...
Click to collapse
Amaro,
Do you mean the earpiece for normal phone calls? (and not the speakerone next to the mirror) If so, I can say with a definite yes that there have been improvements! I got one of the first XDA mini's locally and was treated to high-pitched distortions and crackling sounds, y'know, the types that threaten to blow your ear drums away if you're not careful. After the 1.05 RADIO update, I have not noticed any problems after 60 mins of phone calls. I cannot say it has eliminated the problem 100%, that will take more time, but as of now it is MUCH IMPROVED.
Click THIS for information and instructions how the 1.05 radio upgrade. Be sure to backup everything as it *WILL* do a hard reset after the upgrade, which I did not know about :roll:
The messages in "Sent Items" folder does not contain the number of the recepient. What it shows is the number of the sender (My cell number).
What is this? bug?
Hi guys,
sorry to get back on this question, but it is really bugging me off:
When I try to send an sms to SOME contacts, my 9100 sends me to the generic SMS form - without pre-filling the "To" field with the correct number.
Of course the contacts in question does have a mobile/sms number filled in. Also, I can't figure which contacts are affected.
And: the problem seems to happen only with the original Contacts form. SMSsing from Agenda Fusion works just right.
Editing over two characters in the "note" section of the contact seems to fix the problem FOR THAT SPECIFIC name only, but of course I'd like to find a more sensible solution.
Any suggestions?
no?
hi
The problem with sms is that,
when you receive an sms it display the sender name only
so if you have a contact with more than one number you dont know from which one it was send.
IF there is a way to display the number with the name it would be great.
I tried to find a registry to change that but i found nothing.
so to the genius people (helmi, xplode, bepe, ......) any suggestion.
thanks
please can anyone give me a clue
Hi,
I have not found how to send an sms to multiple contacts. I'm returning the app in every sense, it seems to me that this is impossible! Someone has a solution??
Thanks a lot
Umm just type all their names? If you mean all at once like say a paticular "group" then AFAIK you can't do it to say a "Family" group. You can however add all of your family to a single SMS (which inturn turns the msg into a MMS) and send it that way.
Thanks for your help, i'll try this way....but it doesn't seem the easier !