I just received my shiny new XDA II and I was wondering is there an easy way to dial phonebook entries which are stored on my SIM card?
I notice when you press the Green button to start the phone application there is a button at the bottom to go to the Contacts list (sync'd from Outlook).
I have a hundred or more phone book entries on my SIM card but I notice that when I hit the call button it gives me the option of choosing people out of my synchronised Outlook Contacts list but to call people from the SIM card I have to bring up the SIM Manager and click and hold and select call from an entry which seems cumbersome. Is there a nice easy way to have a combined list of Outlook Contacts + SIM Phone Book entries with a simple click to call mechanism?
I also notice for received calls and SMS's the Caller ID thingy doesn't look at any of the phonebook entries on the SIM card to translate numbers into names - can this be fixed as well?
OR alternatively if the only solution is to have everything in Outlook Contacts then is there a nice easy tool (preferably freeware) which takes all my existing SIM phonebook entries and converts them into Outlook Contact entries?
Thanks,
Rodney...
Ok: when you are in "SIM Manager" select "Tools" and "Select all".
Tap and hold anywere in the window and select "Save to Conctacts" in the pop up that will appear.
I hope this can help you!
Yep - I found that a few hours after making this post - but thanks for that anyway...
So is the general consensus that we shouldn't use the SIM based phonebook at all but rather have all entries in the Outlook Contacts list?
Copying SIM entries to Outlook
I've use the SIM toolkit to 'add' my SIM contacts into my XDA contacts, but when sync'ing with my PC, the new contacts claim to xfer over, but don't appear in my PC's address book. ActiveSync is set to xfer contacts.
Any ideas what might be wrong, or are there tools that will upload the SIM data to Outlook in an easy manner. I appreciate that SIM contact info is limited by the SIM.
Thanks, Hamish.
Friends,
I have recently switched from Nokia 3230 to HTC Touch. I have all my 3230 contact backed up in ".vcf" format. How shall i import all contacts to Touch.
there are more than 250 contacts, which are impossible to enter manually.
Please help me soon bcoz i m using touch without any contacts now :-(
Try to beam them from PC to Touch. Message like "Do you want to save <name> in your contats?" should appear, wait till all contacts are transfered and press "Yes to all"
kalpesh99 said:
Friends,
I have recently switched from Nokia 3230 to HTC Touch. I have all my 3230 contact backed up in ".vcf" format. How shall i import all contacts to Touch.
there are more than 250 contacts, which are impossible to enter manually.
Please help me soon bcoz i m using touch without any contacts now :-(
Click to expand...
Click to collapse
.vcf format is not supported by pocket pc and wont be recognized
how abt saving them to ur sim card and then savin them back in ppc contacts
if your sim card gets full...u can try by going at steps of 100 contacts per round or 50
gronostaj said:
Try to beam them from PC to Touch. Message like "Do you want to save <name> in your contats?" should appear, wait till all contacts are transfered and press "Yes to all"
Click to expand...
Click to collapse
what do you mean by "BEAM them"?? and i have all contacts in single '.vcf' file.
How shall i go about it??
When I switched from my Nokia 6620 I just saved all my contact from my 6620 in address book on my computer (using sinc for Nokia) and then opened Outlook and imported the contact from Address book to outlook. Once this is done, just use Activsinc (for touch) to sinc contacts to the touch. Worked for me. I had almost 200 contacts and it took only about 10 minutes to do it. (Ten minutes of waiting for Sinc to be completed)
hotrod101 said:
When I switched from my Nokia 6620 I just saved all my contact from my 6620 in address book on my computer (using sinc for Nokia) and then opened Outlook and imported the contact from Address book to outlook. Once this is done, just use Activsinc (for touch) to sinc contacts to the touch. Worked for me. I had almost 200 contacts and it took only about 10 minutes to do it. (Ten minutes of waiting for Sinc to be completed)
Click to expand...
Click to collapse
Hi
the real problem for me is (its sort of irony), the day i bought Touch, my nokia 3230 died. It does not boot at all. otherwise I could have sent all contacts from 3230 to Touch by bluetooth only.
right now, what i have in my hand is only a '.vcf' file having all my contacts (which i had created on 3230 using some 'backup contacts' application).
I searched on the net a lot for the application for winMobile which can import contacts from '.vcf' file, but i did not get a single appl.
So even after starting using Touch for 5 days, i am without any contacts on Touch...
Copying contacts into SIM and then retrieving has huge lose of information
ayyu3m said:
.vcf format is not supported by pocket pc and wont be recognized
how abt saving them to ur sim card and then savin them back in ppc contacts
if your sim card gets full...u can try by going at steps of 100 contacts per round or 50
Click to expand...
Click to collapse
Copying contacts into SIM and then retrieving has huge lose of information
1. name and surname are stored in single field in SIM with limited characters.. so name or surname is truncated.
2. If i have stored 3 numbers for a single person, all are stored as different contacts in SIM.. so combining them in Touch will anyways be a headache
3. any photo stored in contact is not saved in SIM.
But with '.vcf' file, all above problems are taken care of. so i am searching a WM application to retrieve contacts from '.vcf' file
Any application that can convert 'vcf' file into WM recognizable format will also be of great help.
.vcf = V Card File. Microsoft address book on your desktop can read V Card Files.
However; your HTC Touch does not so you have to convert them.
Open Microsoft Outlook. Go to IMPORT - click Import .vcf file. Choose your backed up vcf files and click. This will grab your .vcf files and convert them for outlook. They will be converted to become outlook address book files (unsure of what format / extension that is - Didn't check) Outlook will sinc with your device when you connect and voila === All contacts can be on your new device in the proper format since Outlook address book is compatible with WM Devices. The End.
PS. Make sure your activsinc is set up to sincronize contacts.
kalpesh99 said:
Hi
the real problem for me is (its sort of irony), the day i bought Touch, my nokia 3230 died. It does not boot at all. otherwise I could have sent all contacts from 3230 to Touch by bluetooth only.
right now, what i have in my hand is only a '.vcf' file having all my contacts (which i had created on 3230 using some 'backup contacts' application).
I searched on the net a lot for the application for winMobile which can import contacts from '.vcf' file, but i did not get a single appl.
So even after starting using Touch for 5 days, i am without any contacts on Touch...
Click to expand...
Click to collapse
Transfering your contacts from Nokia using bluetooth probably wouldn't have worked - Different format that the WM device does not recognize. It didn't work for me when I tried that first. My Nokia 6620 contacts were all .vcf files so when I sincronized by nokia to my computer my contacts automatically were saved on my computer in Microsoft address book as .vcf files.
You have them already saved as a .vcf file. All you need now is Microsoft outlook - and go to file - import - import .vcf file. voila converted and now in proper format for WM Device.
hotrod101 said:
.vcf = V Card File. Microsoft address book on your desktop can read V Card Files.
However; your HTC Touch does not so you have to convert them.
Open Microsoft Outlook. Go to IMPORT - click Import .vcf file. Choose your backed up vcf files and click. This will grab your .vcf files and convert them for outlook. They will be converted to become outlook address book files (unsure of what format / extension that is - Didn't check) Outlook will sinc with your device when you connect and voila === All contacts can be on your new device in the proper format since Outlook address book is compatible with WM Devices. The End.
PS. Make sure your activsinc is set up to sincronize contacts.
Click to expand...
Click to collapse
Hi...
I think outlook reads '.vcf' file as a single contact person detail. when i double-click on my '.vcf' file, which contains all the contacts, it shows up only first entry of .vcf file and not other contacts.. same thing happened when i imported .vcf file into outlook from 'file->impot->import vcf file'. It imported only first contact info of all contacts.
that means i have to first break my .vcf file (containing 250 contacts) into 250 different vcf files and then import them to outlook ???!!
kalpesh99 said:
Hi...
I think outlook reads '.vcf' file as a single contact person detail. when i double-click on my '.vcf' file, which contains all the contacts, it shows up only first entry of .vcf file and not other contacts.. same thing happened when i imported .vcf file into outlook from 'file->impot->import vcf file'. It imported only first contact info of all contacts.
that means i have to first break my .vcf file (containing 250 contacts) into 250 different vcf files and then import them to outlook ???!!
Click to expand...
Click to collapse
Try importing to Microsoft Address book first then to see if it will open all contacts. Once this is done you (if it does work) you will have to save each .vcf contact as a seperate .vcf file seperately onto your desktop- *(Shouldn't take too long) then use outlook to import the .vcf's.
I have a sneeking suspicion though that when you did your backup you might have only backed up one contact and not all of them.
When you backup .vcf's as an address book it is no longer a .vcf extension but something entireley different (the extension eludes me right now). like I said before .vcf stands for V Card file - ( one address card or file ) not address book. I hope that I am wrong though and that the Microsoft address book will open all the contacts for you.
Otherwise, you might have to try to find a way to either fix your Nokia just to properly backup your contacts or start from scratch as I don't know of any other way.
It is simple, but takes some time.
The cellfone accepts the .vcf cards... but you will have to follow these steps:
1. Copy all your contacts to your PC using the "explorer-friendly" folder at "My Computer" - this folder appears if you have installed Nokia PCSuite.
2. Then, after inslalling ActiveSync, a folder named "Mobile Device" will appear, which control the cellphone files.
3. Open the "Mobile Device" through "My Computer" and create a folder named "Contacts" inside your cellphone.
4. Copy all your previuos contacts to the new folder.
5. Using your cellphone, open the new folder which contains the new contacts, and CLICK ON EACH ONE > the phone will ask if you want to add the contact, then click YES.
It takes some time, depending on how many contacts do you have.
Thanks a lot folks
Thanks a lot hotrod101 and ov3r
using combination of steps suggested by you, I couls import all my contacts to Touch.
Following are the steps which might be useful to anybody else as well
1. in winXP open start->accessories->"Address book"
2. click file->import->business card (vCard)
3. "Address book" builds all contacts which r there in '.vcf' file and shows in form of list of individual vcf contacts
4. connect Touch to PC and open any folder in HTC through activesync explorer
5. select all contacts displayed in "address book" and drag them to particular folder in Touch.
6. inside mobile, keep clicking on individual file, where it prompts for saving contact.
7. this way, save all contacts (really cumbersome clicking all 250 contact file, but certainly easier than typing each contact manually.
*. One loss is photo stored in 'vcf' files are not imported to Touch.
Thanks a lot all folks who took out time to reply and suggest steps which lead me to import all contacts.
still one problem...
ooooopppppssss !!!
still one problem...
if there r more than 1 mobile numbers stored per contact, only 1 number is imported (in XP Address book itself). it allows only 1 mobile, 1 landline number to be imported, not 2 or more of each type..
One more query....
One more query....
Contacts in touch also show SIM contacts.... how to turn them off and view only phone contacts (since i have stored some imp contacts on SIM... so they are shown double in contact list, one from SIM and other from phone)
kalpesh99 said:
ooooopppppssss !!!
still one problem...
if there r more than 1 mobile numbers stored per contact, only 1 number is imported (in XP Address book itself). it allows only 1 mobile, 1 landline number to be imported, not 2 or more of each type..
Click to expand...
Click to collapse
Interesting problem. I don't know if importing the VCF's to Outlook would have solved that problem either. You could try to import one of the .vcf's with multiple #'s to outlook and see if all of the #'s made it. But it probably isn't going to be worth the effort. Just sinc now with your computer - then update all of the missing phone # and re sinc. unless you have a lot of contacts with missing phone #'s it shouldn't be that much hassle.
PS. Glad that you were able to get all of the contacts on there though. You must be so releived.
I don't know what to say about the SIM contacts though because I don't store my contacts to my SIM. Why not just delete the duplicate entry?
hotrod101 said:
Interesting problem. I don't know if importing the VCF's to Outlook would have solved that problem either. You could try to import one of the .vcf's with multiple #'s to outlook and see if all of the #'s made it. But it probably isn't going to be worth the effort. Just sinc now with your computer - then update all of the missing phone # and re sinc. unless you have a lot of contacts with missing phone #'s it shouldn't be that much hassle.
PS. Glad that you were able to get all of the contacts on there though. You must be so releived.
I don't know what to say about the SIM contacts though because I don't store my contacts to my SIM. Why not just delete the duplicate entry?
Click to expand...
Click to collapse
indeed i am relieved with all your help.... I did not have many contacts with double numbers.. so for such contacts, i will manually add second number...
Regarding storing contacts in SIM, it is needed when your cell stops working and u need to put your SIM in some other mobile to make call to anybody.. if no numbers r there in SIM, and ur cell stops working, I will be screwed up since i dont memorise any number
kalpesh99 said:
ooooopppppssss !!!
still one problem...
if there r more than 1 mobile numbers stored per contact, only 1 number is imported (in XP Address book itself). it allows only 1 mobile, 1 landline number to be imported, not 2 or more of each type..
Click to expand...
Click to collapse
that's really a problem, cuz Touch has many fields: cel, home phone, home p.2; work, work 2 etc; but does not have a field named "cellphone 2" or similar.
so, if a contact has two cellphones registered in its .vcf file, only one number will be imported. it's an incompatibility between Nokia and HTC field arrangement.
you may solve the problem by switching one of the numbers (ex: the less used by the person) to a differente field, i.e., "car phone", but before copying the .vcf file to the phone.
that's the only thing you can solve this problem.
PS: the second number (of two cellphone numbers) is in my phone as "car phone" or as "radio phone" in my contact list.
how to make .vcf file from my HTC Touch Pro?? because i'm going to update my ROM.. i've been trying to find it, but i coudn't find the way to safe it as .vcf file.
i would like to back up all my contact detail from my HTC...
please someone who know about this matter help me..
thank you
excelex said:
how to make .vcf file from my HTC Touch Pro?? because i'm going to update my ROM.. i've been trying to find it, but i coudn't find the way to safe it as .vcf file.
i would like to back up all my contact detail from my HTC...
please someone who know about this matter help me..
thank you
Click to expand...
Click to collapse
U could look for Cellica.Contacts.Synchronizer
sorry guys i've just copied my sim contact to phone contact but when i open contact there's a sim contact data and phone contact data
ijust want to know how to hide the sim contact data cause it's very disturb me and make me confuse
displaying data
my solution for your problem is that i synced all my contacts to outlook then opened the editor in outlook and changed the catagory for all the on phone contacts to personal, then when displaying contacts on phone i just filtered it by catagory
hope this works for you
thx i've just want to try it
Check post no. 4
i have installed this on my HTC touch and i no longer see the sim contacts in the contacts list.
On my pc i have set up the main contacts folder and a subfolder which contains all my mobile numbers [all nicely ordered etc!]
Is there anyway I can make the activesynch see this mobiles-sub_folder to sych with rather than just the main "contacts" folder of email addresses?
I tried importing from SIM and the process is screwed up:
What was "John Smith" home number on my SE (backup to SIM)
imports as "forename" - blank
Surname - smith; John/1"
So I don't think I could even use the re-sorting cab file to re-order them first name/Surname and would have to edit >180 contacts unless I can synch with the Outlook Folder.
Help Appreciated!
I didn't even know you could make additional folders in outlook...
You should merge the contacts, as in so that mobile and e-mail address for the same person are in the same contact - as it's meant to be.
If you want to differenciate, use categories.
If you don't want to / can't merge, or they're simply completely different people, I'd assign let's say a "phone" category to all your phone contacts, a "mobile" category to the mobile ones. Then move all the "mobile" ones into the main folder.
You can always filter by category afterwards, both on outlook and on the phone.
Okay thanks
Reading around, I see that ActiveSync can't synch with sub-folder.
It is rather poor that MS software will not do something with MS software than a 3rd party App [that Ericsson provided] will do.
Hallo , Im new here and few days ago I bought Snap, i have problem with contacts, my old phone - nokia 6280 doesnt have option to put contacts from phone to sim, I exported contacts to file with nokia pc suite but I dont know where I have to put it in my HTC. I also have a problem with Tomtom, I saw in one thread someone said about virtual cursor application, I search it and I cant find it. The more I use my Snap the more I need your help, I also want an application that will block my snap within 20 seconds when I dont use it, will you help me ?
Hi, if you need help with contact from Nokia,, I have an experience. You have to send all of contact to outlook, rename Nokia standardd contact phone from OTHER to MOBILE. Windows mobile and outlook does not work with type of contact OTHER, only with MOBILE, WORK etc. The next way should be export to excel - rename - import back.
Bye Libor
Basically, I synced my Nokia E75 contacts to Microsoft Office Outlook 2007 via the Ovi Suite and then synced my HTC snap contacts to my Microsoft Office Outlook.
Any unrecognized contact numbers (e.g. "Others" category) will be very obvious when you view your contacts on your HTC Snap as there is no number assigned to that particular contact. If that's the case, just edit that contact on your Microsoft Office Outlook with the proper contact number category (e.g. Home, Work etc) and re-sync to your HTC Snap.
Hi, I had quite the same problem while I changed from E51 to Snap. On the E51 I saved all contacts to the storage card (*.vcf). When I put the card into the snap and klicked on an contact, it asked me if I want so save the contact in the phone. I did so for all my contacts and now it´s done