upgraded to 4.21. rom and radio version.after a few days i was not able to connect to my pc. i cold rebooted and everything was pok. a few days later same thing happened. i decided to downgrade back to 3.14.13 from irish o2 site. did that with sd-method. went superb, but radio was still4.21 and phone did not work "no signal" message. Tried to downgrade to 3.16 using progrsm from o2 ireland site but got message "flash failed'. How can i downgrade my phone back to 3.16?
Related
I upgraded my xda using the sd-card method. It worked for a few days, but then i was not able to connect to my pc. I downgraded to irish o2 3.14.13eng via sd-method. radio version is still 4.21. Now the phone is not functioning at all. It says "no signal". How can i go back to my old 4.16 version and keep the 3.14.13 rom?
BTW: i tried to downgrade to 4.16 via the exe. filef rom irish o2 site, but i get the message "flash failed". HELP
I upgraded my pda with t mobile 4.01 beta rom then i was trying to get rid of it and upgrade to ATT latest rom. but it was not letting me to GET rid of it. SO i was trying many thing after doing them i saw that my pda`s phone feature is gone. then i installed RSU "PROGRAM B" SOURCEO2.com that is 4.0 something. I HAVE TRIED MANY THING BUT NO USE I HAVE ALSO DOWNGRADED TO WIN CD 2002
may be the att RSU will solve the problem. please tell me where to download it from.
the mobile was running on 900/1800
NOW THE PDA IS NOT DETECTING ANY SIGNALS.
AND I FEEL LIKE CRYING B/C IT WAS MY BROTHERS WHO GAVE IT TO ME FOR UPGRADING
Looks like you have the same Problem as i have. Check if your GSM-Module is still doing: You have to get into the Bootloader and check if it says "GSM OK" (then you are a lucky owner) or if it says "GSM Error" (then you´ve got the same problem as I´ve got). If it is the second case: Try this one: http://forum.xda-developers.com/viewtopic.php?t=1182&highlight=solved+gsm+error
Or this one: http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=screen+1
But i need to say that these tips haven´t helped me out of this Prob. I hope it will help you!
So long...
no error any where GSM OK
NO HANGS every thing is fine.
Where can i down load ATT .20 RSU
I downloaded the rsu for ATT from yorch.net and now its getting signals.
Hi all,
I've got an Orange SPV M1000, and have had it for around a week now with only a couple of problems. A quick Unlock and a ROM flash from the XDAII's latest image on the O2 site solved them all.
However yesterday at around 2pm, my phone simply stopped working as a phone! It was attached to my belt, so I don't know if there was anything on screen to signify this occurance, but now I can't get the bloody thing to work! I've tried flashing to 2003SE (Wrong country code despite xda2nbftool), and now an unaltered Orange image, but still no signal.
Is there an easy way to see if the previous owner has reported the phone stolen? Is there anything else I can try accept a ROM upgrade?
Thanks all.
Current ROM details:
1.66.00WWE
1.10.00
1337.18
1.66.230
The details in my signature were prior to this problem and worked fine.
Upgraded back to O2 software, details as in signature.
Still no luck.
Man, I didn't even plan to have alliteration, and there it is!
So, I have had my cingular 8525 for about a year right now, and in the last 2 weeks or so I have been getting some bad problems popping up. For some background, I bought the phone in Texas and was using it on the cingular network for some time when they switched to the AT&T network. I flashed VP3G's AT&T roms using hardSPL and they worked well for some time. Then, I came to Europe to do a semseter abroad. I unlocked my phone using some software I found here on the forums (don't remember exactly what it was) and got an 02 SIM card. Everything went fine, was working well until I went on holiday to Europe. I didn't really use my phone much there because it was so expensive, but as soon as I got back I started to have problems.
For about a week, my phone would just drop in and out of service in places that it had not had any trouble working in before. What would happen is, in the place where there is normally the bars for reception, there would simply be an exclamation point and any time I would try to make a call it would fail, sometimes with a message, sometimes without. Then a couple of seconds later, I would have full service again, then it would go to the exclamation point again, full service, etc. It just kept cycling through them.
So, I came to my trusty forums here to try and figure out what was wrong. I flashed a different radio (from 1.47.30.10 to 1.48.0.0) which didn't fix it. I tried downgrading my SPL from hardSPL to 1.04, then upgrading back to the most recent hardSPL v7, which didn't work. I tried putting a new OS on it, the 19900 build, which didn't work. I tried switching the radio back, which didn't work. Then I started noticing that when I was starting up my phone, I was getting a 'no GSM' dialog where it used to say the radio version. I searched around the forums, finding some different solutions for the no GSM problem, and decided to try completly reflashing to an AT&T shipped rom.
So, I downloaded the ROM from the HTC site, downgraded my SPL to 1.04 again, and started the flash process. At 11% it stopped and had an error, and after that it wouldn't leave bootloader mode. I again searched the forum and tried to use MTTY to fix it. The command 'set 14 0' didn't work but 'set 16 0' did.
Now, my phone boots again, but it starts up with the AT&T screen, then goes into the 19900 build OS. As it stands now, I still keep dropping in and out of service, but I am afraid to try any more fixes for fear that I will screw something up again (like locking it in bootloader mode). Any ideas of the next step I should take to fix my (probably) corrupt radio?
OS: PDAVIET build 19900
Radio: 1.47.30.10
IPL: 1.03 (from failed AT&T flash)
SPL: 1.11 (from failed AT&T flash)
Update: I just soft reset my phone, and now the 'phone' feature of it won't even turn on when I select it in the comm manager!
Update update: As I was writing this, the phone just turned itself back on without me trying to in the comm manager. Maybe its just possessed, and I should seek the help of a priest!
1). Have you tried taking out the battery for a while? It seems that the hard reset is somewhat different from the soft reset and can fix this...
2). Check for bad blocks with MTTY... Remember though that sometimes the carriers put in "Bad Block" to brand the phone as theirs...
3). Try flashing a stock rom then reflashing wm6.1. This seems to help a hell of a lot of people fix the HR problem.
Hope these help you.... Cheers.
Hello All,
I upgraded my EXEC to WM6 with the ROM of lucathebig. I did not upgrade the radio rom.
I don't know how it happened but, every time I switch it on, even without the sim card in, I can't access the phone settings! Or even the dialpad for that matter.
When I click on the signal icon, the balloon comes on but says "The phone is off"
When I tap settings nothing happens.
Please note that it was working a couple of days ago. I reset it to factory defaults but nothing happened.
Has anyone else got any suggestions? I will try to avoid flashing the ROM again and I'll keep it as the last option.
Update:
I noticed that there's no Radio version or IMEI on the system information on my phone so I figured that the radio got corrupted or something like that.
I tried to flash the Radio but i get the 114 error from the upgrade tool.
I tried all sorts of different upgrade tools with different radio version but none of it worked...
I am now downloading the official O2 update Xda_Exec_Upgrade_v113188.exe and try to install this instead to see if it fixes the Radio.
Has anyone found a solution for the 114 error? I have read tens of posts but can't seem to fins anything that helps. The people who solve it, use different versions of the update tools or they remove the USB hubs or try the upgrade 3 times.
Help ..?
I tried O2 update but the upgrade executable gave me a country ID error.
So I took the WM ROM and the Radio Rom from the zip file and tried to upgrade both but on the the WM ROM was updated. The Radio rom still gives me an error when I try to Flash...
Ohhhh this is so dissapointing.....