i got a copy of a german rom directly from XDAII O2 German.
after the update the device ended with a black screen and do nothing.
if i do a reset i can only go to the bootloader.
can any1 help me with that or do i need to go back to my old os ?
Related
My O2 XDA is quite old and I have been running a revised WM 2003 ROM 4.01.16 Eng with radio 4.21 for ages.
I want to put back the original rom but can’t get to the bootloader! I have tried every combo of Soft reset and Hard while holding down the power button excreta but noting. What am i doing wrong ? I have a ROM made by XDAtools (i thnk its ok)
Just to add the ROM is T-Mobile - ps its the one you cant upgrade with .EXE PLEASE HELP
Just to add the ROM is T-Mobile - ps its the one you cant upgrade with .EXE PLEASE HELP
Using activesyn?
Harry, have you tried using the bootloader patch in xdatools, if you have xdatools installed, go to start on your desktop then programs/xdatools. An option to fix broken bootloader should be there.
Harry, have you tried using the bootloader patch in xdatools, if you have xdatools installed, go to start on your desktop then programs/xdatools. An option to fix broken bootloader should be there.
macihne gone now - ive now got XDA II Tnx for all help
Hi all,
I have an imate JAMin with dopod ROM (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID), RadioRom 2.30.21, extended ROM unlocked, visible and writable (I used Prophet_ext_rom_unlock.exe)
Now, I'd like to change dopod splash screen with the original iMate, but I didn't find a clear method to do this for prophet.
Any idea?
Thanks.
Alex
Try this site...
http://buzzdev.net/index.php?option=com_content&task=view&id=68&Itemid=1
Thanks, but on buzzdev site I read:
WARNING!
This procedure and tools applies to UNIVERSAL device only!!!
If you do the same on other devices, you can permanently damage them.
So, is there any way to change the screen on Prophet?
Bye
Prophet splash
I am first going to say...'I am not an expert.'
Ihave an O2 Neo with the PDA Mobiz rom. The following is the link to the forum ftp with the files i used to get an O2 splash back.
ftp://xda:[email protected]/Uploads/Prophet/Prophet-logos
I got my official splash back by re-installing the original O2 rom then installing the PDAMobiz rom. Just my experience. I feel like I'm getting to know what I'm doing. I bricked the phone and brought it back to working perfectly so I'm not a complete idot...lol
Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone
same problem here,
help needed in advance
Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.
hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.
how do you get the phone into the bootloader?
Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.
no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?
The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)
im having the same problem on the o2 orbit ( need a orignal rom
upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent
i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.
cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!
send me a pm with your email, i'll send it to you
got mine back from the repair center friday.
no cost at all, fixed
route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one
I've to send my Trinity to warranty, but my trinity came a with a Portuguese Vodafone rom, i've downgrade to HTC WM5 portuguese, but couldnt install vodafone rom, i've extracted the installer and run Des SPL but the vodafone rom don't load in boot loader mode.
I've changed roms with diferent RUU but no sucess, but i'm afraid to brick my phone, my problem its only battery.
Any sugestions?
Thanks in advance
Hi.
Thats the same affraid I have before put WM6 on mine, and it's Vodafone PT too.
Did you solve the problem?
Just for test, I try a few days ago to put the Vodafone Rom again, the first part goes well but after that, the program gives an error.
I was scared but after restart the phone, the WM5 was installed again, but no Vodafone logo or else, because I think the 2nd part was the network customization.
Any advice?
Dear All
I have upgrade the atom with the atom rom WM6.5 21500. The rom was successfully upgraded but i don't like it. And when i tried to downgrade it to WM6.1, it didn't work. I have tried to enter bootloader but i can't, when the atom restart, they will not boot and restarting again and again. .
Please help in this matter..
thanks.
Hello
For me ist is the same Problem:
i managed to update to WM6.5 but wanted to go back to the original WM6
and now i tried different Memorycards and only got a "clean boot" of the WM6.5 (not for one time the Point were it tries to update the Rom)
The Reason to change to 6.5:
i had Problems with my E-Plus Sim > it runs for about 1 or 2 Weeks and than lost Connection an on Restart it doesn´t find the Simcard ...
Reason to change back:
with 6.5 it got the same strang behavior.
the 6.5 is in english Language and i am German and so i wanted to go back to the original Rom
With both Rom´s i used a Prepaid Simcard from Congster for testing and with this Sim the Phone had no Problem. So i dont think the Phone has an hardwareerror > just seems to dislike my E-plus Simcard ...
So i will return to my Question:
has the Way to reach the Bootloader changed with the WM6.5?
Is there a different Way to return to my old Rom?
I hope someone can help