Database Users

o2 UK gprs settings

Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.

WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.

02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA

Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.

thanks, i will add it to my txt file
missed those

I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.

Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.

Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.

Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.

Nobody in UK on O2 pay as you go :?: :?: :?:

Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.

cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here

OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks

Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse

im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp

O2 XDA - O2 Service Provider - Got MMS and GPRS all working

Hello there,
I have just got MMS and GPRS working on my O2 XDA. Very happy about this! I phoned up O2 and verified that MMS was enabled on my account, which it was. (I am billed by O2 theirselves as my service provider, not sure if that makes a difference)
Here is how I did it (Note, I am using WM2003, your results may differ if you use PPC2002)
Setting up GPRS
- Start > Settings > Connections > Connections
- Under My Work Network > Add a new modem connection
- Enter a name: <Enter anything, I called mine GPRS>
- Select a modem: Cellular Line (GPRS)
- Access Point Name: mobile.02.co.uk
- user name: web
- password: web
- leave advanced as default
- Click finish
- Click ok to go back to connections menu
- At bottom tab, select advanced > select networks
- Change both pull down menus to My Work Network
That has set up your GPRS connection. To connect to it manually, press the little umbrella symbol that shows your connection and select connect to GPRS. Once it has connected the arrows will appear
Setting up MMS
- Download EZ Wap 2.5 from www.yorch.net
- Install
- Go into the EZOS EzWAP program (not the MMS one for now)
- Select Tools > Options
General
- Select your GPRS connection that you set up from the pull down menu (i.e mine is called GPRS)
- Connect Automatically: Ticked
- All others default
Connection
- Select Gateway as connection type
- Address: 193.113.200.195
- Port: 9201
- Connectionless Gateway: Unticked
- WTLS secured connection: Unticked
- All others default
Push
- Enable Push: Ticked
- Address: Leave empty
- Port: 2901
- Connectionless push gateway: Ticked
- WTLS secured connection: Unticked
History/Cache and Identification can be left as default
MMS
- Message Server: http://mmsc.mms.o2.co.uk:8002
- Sender Address Type: Phone Number
- Sender Address: Your telephone number, in the format +44... (i.e +447793 etc etc)
MMS Options
- Message Expiry: Max
- Delivery Report: Ticked
- Read Report: Ticked
- Hide Sender: Unticked
Okay, I think about covers it, those settings work for me, I can send and receive messages on my XDA 1.
Any questions, please ask
Daniel

The bills will always say o2 unless you're with singlepoint or carphone warehouse
If the number ends in 3333 or 3543 you're with dyce. When it ends in 0202 thats the new geneva or gateway.
Richard

ive always had GPRS and mms owrking on my xda on PAYG
just on PAYG you cant surf the net with GPRS only WAP but you can use WAP to surf the net so all is good

dannay - mms on xda
do you have an xda 1 on pay monthly contract?
i've been trying in vain to get mms working on mine.
i'm running ppc2002 on my xda1.......................does anyone know how to get wm2003 running on it? (where do I get it and how do I go about putting it on?)
might be asking obvious questions - but im a newbie!

Tytn won't download MMS

Hey folks,
Received notification of my first MMS since getting the Tytn. I selected "Download" and also "Send/Receive" several times, and it won't download the stupid thing.
I'm on Cingular, and here are the settings I entered manually, per Cingular's website:
Gateway: wireless.cingular.com
Port: 8080
Server: http://mmsc.cingular.com
Connect via: (I've tried "The Internet" and "Media Net" here)
Sending size limit 250k
WAP version: WAP 2.0
The following items are checked in Preferences:
-Retrieve Messages Immediately.
-Save Sent Messages
-Allow Delivery Report
Attempts before giving up: 4
Photo resolution: original
The file being sent to me is only 109k so I don't think it's too big by any means.
Does anyone on Cingular have any different settings?
Thanks.

Cingular MMS Settings
Hello, this is my first reply on this board so here it goes.
i had plenty of problems at first with cingular and mms working together untill i tried these settings which are pretty similar to yours besides the port #.
Server name: Cingular MMS
Gateway: wirless.cingular.com
Port Number: 80
Server address: http://mmsc.cingular.com
Connect via: My ISP
Sending size limitaion: 250k
WAP Version: WAP 2.0
Now a couple of explanations. ( to the best of my ability. please feel free to correct.)
server name: this is either the default name or you can create a new server name of your choice. I have gone as far as deleting the default server and creating the new name of Cingular MMS. Or for example you could put Joe Blows Server Or JBS for the new name whatever you like.
Gateway: has to be as is. (as far as I know.)
Port number: Although ther are several port numbers to use I have found that this number (80) is what actually made everything work.
Server address: has to be as is. (as far as I know.)
Connect via: whatever connections you have to connect to the internet you should have mms connect the same way.
Sending size limitation: 250k is the maximum. (If there is any way of getting mor plese let me know.)
WAP Version: I dont know the difference between WAP 1.2 and 2.0 except 2.0 sounds better.
Also under prefernces i have.
Retrieve messages imediately-checked
Download on home network only-not checked
Save sent messages-checked
Regect all messages-not checked
Allow delivery report-checked
Allow read report-not checked
Attempts before giving up-4
Photo Resolution-Origional
The only setting that I would think of be crucial is download on home network only. (for cost reasons. depending on plan. I guess.)
Other than that just make sure the little red arrow is on the server that you just configured or created and you should be set to go. if any one finds any of this info false please feel free to comment, otherwise this is what I have found to work on my htc tytn here in the usa on cingular and cingular UMTS. GOOD LUCK.....

correct, should be port 80, thats what mine is, and my max sending limit is 600...
here is another thought, why not extract the cab from the cingular extended rom that installs the MMS settings?

you also need to go thru the Cingular proxy server. set up the proxy server under Settings->Connections->Edit My Proxy Server for the connection you are using. under Advanced change HTTP to wireless.cingular.com also make WAP & Secure WAP 66.209.11.61 (leave the ports as they are).

The settings from Cingular website (https://www.cingular.com/support/deviceTutorials.do) is correct. However, I made 1 tweak:
In the "Connect via:" box, I put "My Work".
I created an additional entry in the "My Work Netwokr" (Start -> Settings -> Connections -> Connections) and put wap.cingular as the APN.
This way, when an MMS need to be sent or downloaded, the device will drop the 3G / GPRS connection and connect via the MMS setting. Afterwards, it'll connect back to the 3G / GPRS connection.

mine does that with the default setup, i stay on my isp, but if i send or recieve it automatically drops the connection and connects via media net, once its done it goes back to my isp

MMS Vodafone UK with WM5

Help! - Has anyone else transferred their O2 xda Exec to Vodafone, or does anyone have a V1640 that they can check the settings for MMS with me?
I've changed over to voda, have loads of apps installed. Vodafone's business help line seem blissfully unaware of the extra settings inside the Messaging App on WM5 for MMS config.
Normal internet connectivity is ok, but at the moment I can't seem to download any new MMS messages. They arrive in the inbox and the size shows up, but I just can't download.
For the Connection details - Stangely, using the dedicated IP that the support team provided for the IP address of 212.183.137.012 doesnt work, when its on IP address is provided, it does try and access messages, but just can't download them.
Its got to a stage now, where they seem unwilling to help because its "not a handset they provide" despite me explaining that its the same mobile OS as dozens of other handsets and the settings will be exactly the same as on any WM5 based device.
The settings they can't seem to help with are those inside the messaging app on the menu "MMS Configuration" (see below)
----------------------------
Messaging > MMS > Menu >MMS Configuration
Preferences Tab:
Retrieve messages immediately (ticked)
Download on home network only (unticked)
Save sent messages (ticked)
Reject all messages (unticked)
Allow delivery report (unticked)
Allow read report (unticked)
Use signature with this account (unticked)
Signature (blank)
Attempts before giving up: 5
Photo Resolution: Original
Servers Tab
> wap.vodafone.co.uk
Server Name: wap.vodafone.co.uk
Gateway: 212.183.137.012
Port Number: 9021 (also tried 8080 - no luck)
Server Address: http://mms.vodafone.co.uk/servlets/mms
(also tried without the http://)
Connect Via: Vodafone MMS (see below for this)
Sending Size limitation: 100k
WAP Version: WAP 2.0 (also tried 1.2)
About
MMS Composer version 3.0.0.32
---------------------------
Can anyone help, its been several days now and its really annoying me!

Annoying, but here's how
Hi Derek,
I just got this working again after having the same problem as you. Here is my setup (based on WM6 on an O2 XDA Exec running on Vodafone) - and the trick you need to know is at the end:
Settings -> Connections, I created a new modem connection called "Vodafone MMS & Data" of type "Cellular line (GPRS, 3G)". Under this setting, I have created two connections, one called "3g data" and one called "3g Wap Connection".
"3g data" is set up with access point "internet", username "internet", and password (I think) also "internet"
"3g Wap connection" is set up with access point "wap.vodafone.co.uk", username "wap" and password "wap".
OK, so you have a connection with two options set up as a result of this. For 99% of your day-to-day browsing, you just leave the connection set to use "3g data" by default, but when you get the notification of an MMS message, disconnect any existing online session and then go in and select the "3g Wap connection" option, then tap-and-hold and select Connect. Once you're online with the Wap connection you can then go and download your MMS message.
Hope this helps,
Darren

Here's what to do
In Settings/Connections/Connections you should have one connection set up under My ISP for internet access:
Name: VF Web (or whatever)
Select a modem: Cellular Line (GPRS, 3G)
Access point name: internet
user name: web
password: web
You should also have one connection set up under My Work Network:
Name: VF MMS (or whatever)
Select a modem: Cellular Line (GPRS, 3G)
Access point name: wap.vodafone.co.uk
user name: wap
password: wap
Finally set up your MMS configuration to Connect via: My Work Network
That's how to link internet and MMS to the two separate connections.

Waking up the deads
Lol
Have you seen the date of the thread?
I´m sure he/she already solve it

orb3000 said:
Lol
Have you seen the date of the thread?
I´m sure he/she already solve it
Click to expand...
Click to collapse
I did indeed notice the date of the thread. However the advice given here was not the best solution. I was trying to set up MMS on my O2 Exec on a Vodafone sim for the first time a few days ago, and couldn't find a complete and proper solution anywhere. Thankfully I managed to work it out and posted it here in case it helps others. The Universal and WM5 are both still alive and kicking.

Thats ok mate, just joking
Thanks for your comment

Blue Angel newbie

hi all i have a orange SPV200 with the following
ROM version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.06.02
Protocol version: 1337.38
ExtRom: this is empty
what im trying to find out is how do i set it up to surf the net. it links fine when its connected to the pc and all other functions seem to work fine and as they should but just can not get it to work.
p.s
this phone is now unlocked and has a vodafone sim in it
any advice would be great (have spent 2 days on here trying to find the answer)
thanks in advance

what are you trying to use for going online, wlan, bluetooth shared connections, activesync shared, or gprs, and what country are you from?

right im from the uk
and im not entirely sure which way to use it, i want to be able to access the net whilst on the move, so i think i need to use the gprs but im not sure on this, i know i can access the net on my standard nokia N95 and would like to use the blue angel in the same way.
thanks

to use it on the move, the only possible option is gprs, which is unfortunately not free in contrast to all the other attrative options i gave you, but maybe your plan covers it, in germany it is rather expensive, so i wouldn't use it, and so i can only offer limited help there, but i give it a try:
1. go to Start -> Settings -> Connections -> GPRS Settings and make sure the right protocol is set. on the first page, mine says CHAP on the second one Class 10.
2. leave the GPRS Settings and enter the Connections app, so Start -> Settings -> Connections -> Connections as stupid as it sounds, in there, go to My ISP and make a new GPRS connection.
unfortunately, in my experience, if i enter anything there, my phone constantly trys to connect to gprs, even if i set nothing at all, but i looked up the uk vodafone gprs settings for you:
"Vodafone GPRS settings:
Vodafone GPRS settings (WAP):
Homepage: http://wap:1999/vodafone.wml
APN address: wap.vodafone.co.uk (Contract)
APN address: pp.vodafone.co.uk (PAYG)
Gateway (IP) address: 212.183.137.12
Username: wap
Password: wap
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Port number: 8799
Vodafone GPRS settings (Email/Web):
Homepage: http://wap:1999/vodafone.wml
Access Point (APN) address : internet (Contract)
Access Point (APN) address : pp.vodafone.co.uk(PAYG)
Username* : web
Password*: web
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Email SMTP server: send.vodafone.net
Email SMTP server: smtp.vizzavi.co.uk
Alt email SMTP server: mail.vizzavi.co.uk
Alt email SMTP server: mail.vodafone.net
Alt email SMTP server: 212.183.156.229
Alt email SMTP server: 62.213.128.92
DNS Server: 212.183.137.12
Note: GPRS subscription must be enabled for "Vodafone Internet Access Service".
Contact Vodafone Customer Services on 191 from your Vodafone handset "
That's what it said on: http://www.filesaveas.com/gprs.html
I hope you find a way to enter this information there somehow, and then you should be ready to go.
i don't know how long your battery lasts, and how common free public hotspots are in your area, but as gprs is pretty slow, i would also give wlan a try and leave it activated with the option to connect to any unencrypted network, 1. it's free, 2. it's faster

I found this NetWorkWizard in Swampy's ext rom (if i'm not wrong ). I hope it helps you. Just check if it's contains your operators setting

yess usinf networkwizard.cab select your provider and wait a minute it configure you GPRS setting automatic. than soft reset

thnx
thank u very much(about networks),u read my mind,i needs this really,thnx