Can anyone help me with getiing my GPRS to work when not in the cradle...I used the information on Cingular's Development site and still no luck...I would like to use the device like my old phone, push the "i" and I was connected...any help would be greatly appreciated.
WM2003
ROM A.30.09 ENG
Radio Version A.33.02
Protocol Version 1.3.3
I get The cannot connect, make sure your phone is on or check your settings...
Download newest T-Mo Radio Stack (get from http links in announcment posting) Manually upgrade you radiostack (See threads/search tool for "upgrade downgrade radiostack) you will find enough info after reading a little to make this work. Prob is that ATT radio 1.3.3 proto' does not work on Cing/T-Mo network. You can leave your current ROM, but might want to switch all together to the new T-Mo stuff.
Hello,
I am using cingular on my XDA II along with GPRS and it works great. Here are the right settings:
Goto Start->Settings->Connections
Click CSD Line Type:
Date rate: 9600 .v32
Connection element: Non-Transparent
Click OK
Click GPRS Setting
Make sure PAP Authentication is selected
Click GPRS-Setting
Make sure Class 8 (4R1T) is selected
Click OK
Now we're ready for the settings
Click Connections
Under My ISP Select Add a new Modem Connection
Name: Cingular GPRS (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access Point Name: isp.cingular
User Name: [email protected] (MUST BE UPPERCASE)
Password: ZXY203DC9K0402
Click Finished
You should now be at "My ISP" and have "Cingular GPRS" or similar listed for the name
Click OK
You should be in the main connections window
Under My Work Network, Click Add a New Modem Connection
Hit New
Name: WAP (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access point name: wap.cingular
Click Next
User Name: [email protected]
Password: CINGULAR1
Click Next
Click OK
You should be in the main connections window
Click Set Up My Proxy Server
Check both boxes BUT LEAVE the Proxy Server Box empty
Click Advanced
Type 66.209.11.61 in the WAP and Secure WAP Boxes
Click OK
Click OK
Click OK
these settings should get you going with GPRS over cingular network.
Hi,
How do you like your XDA with Cingular? I am in NYC and can only get 1 to 2 bars with an ok recpetion. Are you using media works as well?
Cant get Cingular GPRS to work...assitance?
Had an old T-mobile pocket PC...unlocked it and flashed XDA Developrs ROM. What are the settings for GPRS, I have the wireless Cingular Media Package
ROM 3.17.03 ENG
ROM Date 5/15/03
Radio 6.18.99
Protocol 324E4
Still Lost
If someonecan email me or pm about this config. on Cingular Service. I am just having a hard time getting the GPRS/ WAP/Internet to connect. I am using a SX56. Plaese Help Someone! :?
Under GPRS
APN: wap.cingular
username: [email protected]
password: CINGULAR1
This is what I use for my GPRS connection with media works. Does your sx56 has a triangle, raoming, icon on?
I am having problmes regitering my xda I on the Cingular netowrk here in Atlanta. Cingular operate here on the 850 band and, while my device can see the T-Mo and ATT networks, I cannot register on either one. I see that folks in this post have connected to Cingular. Are they operating at 1900 in your areas?
I am in NYC and Cingular still operates under GSM 1900. I am not quite sure whether they will start to move away from GSM 1900 to GSM 850 anytime soon, but we are switching to T-mo in october.
Switching is probably a good idea. Right now Cingular are preventing roaming if a native 850 band network is available. If you travel, you will probably have problems...
Changing the sequence
Has anyone that is on Cingular tried to change the sequence of the network search once connected. Phone-->Tools-->Options-->Network-->Set Networks and then check the T-Mobile and AT&T boxes and move them to the top. That should theoretically change the search function for the networks. I.e. look for the T-mob and ATT networks and try to connect prior to looking at the Cingular ones.
Just a thought...
I am in Dallas and they are 850 around here so I have not had a chance to try this myself... but seemed logical.
Dustoff
There are a couple of reasons for us switching to T-mo:
- Hopefully by OCT family plan will still be $9.99 with unlimited Mo to Mo (I think Cingular $9.99 might not be around for that long)
- $19.99 unlimited internet plan anyway you want to use but not abuse it
- GSM 1900 MHZ
- My local sub dealer offers way better deal for T-mo phones
I am hoping that by october P800 will be free and P900 could be on a sub $150 for 1st line and a free V300 for my wife line.
Does anyone know whether this unlimited $19.99 is good for both Blackberry (I will register with t-mo and blackberry.net), cell/pda phone, pcmcia card for laptop and phone connect to laptop via usb/infared? or Do I need to purchase $19.99 for blackberry and another $19.99 for the rest?
Please advise.
I have a new SX56 and used all your settings but no luck
I have used all your settings. I still cann't get connect with cingular.
Does anyone know how to get the configurator on the simens website to send a configuration for sx56 even though they don't support it.
I know the sx1 is list on the site. Is there anyway to modifiy the config of the sx1 to match the sx56 ?
Any suggestions ?
abohsali said:
Hello,
I am using cingular on my XDA II along with GPRS and it works great. Here are the right settings:
Goto Start->Settings->Connections
Click CSD Line Type:
Date rate: 9600 .v32
Connection element: Non-Transparent
Click OK
Click GPRS Setting
Make sure PAP Authentication is selected
Click GPRS-Setting
Make sure Class 8 (4R1T) is selected
Click OK
Now we're ready for the settings
Click Connections
Under My ISP Select Add a new Modem Connection
Name: Cingular GPRS (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access Point Name: isp.cingular
User Name: [email protected] (MUST BE UPPERCASE)
Password: ZXY203DC9K0402
Click Finished
You should now be at "My ISP" and have "Cingular GPRS" or similar listed for the name
Click OK
You should be in the main connections window
Under My Work Network, Click Add a New Modem Connection
Hit New
Name: WAP (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access point name: wap.cingular
Click Next
User Name: [email protected]
Password: CINGULAR1
Click Next
Click OK
You should be in the main connections window
Click Set Up My Proxy Server
Check both boxes BUT LEAVE the Proxy Server Box empty
Click Advanced
Type 66.209.11.61 in the WAP and Secure WAP Boxes
Click OK
Click OK
Click OK
these settings should get you going with GPRS over cingular network.
Click to expand...
Click to collapse
Hi Abohsali
Many thanks for the data! I am assuming that Cingular are operating at 1900 in you area and not 850. Is that correct? Or are these settings allowing you to roam on another providers network, while still using the Cingular sim card. (you are using a cingular sim, correct?)
Regards
Chris
Hi Abohsali,
The WAP Settings works. Thanks, but the GPRS settings don't. I don't know why. I could connect my AOL Instan Messenger but when I try to check my email, it tried to connect to the GPRS.
Any idea? I'm getting tired calling Cingular, they have no clue. Thinking of switching to T-Mobile
Still can't get GSRP with my Simens SX56 (Cingular Network)
I have tried everything I've see here and at Cingular developer site.
I even printed out the paper forum. Cingular(http://alliance.cingularinteractive.com/dev/cda/home) and from this site.
Does anyone have a Siemens SX56 phone using GPRS??
I would love to know what the correct settings are.
When I try to connect I get the following:
The answering modem had disconnected. To check your connection settings and change them if need, tap settings
Help ?? Still can't get GSRP with my Simens SX56
Is anyone ready this ?? Can I get a little help
I finally got both GPRS and WAP to work. Funny thing is that IE could open wap sites if I'm on the WAP network and AOL Instant Messenger could also be run with WAP network.
GPRS is not bad in speed, I could get it to open with IE and turned off the images so it doesn't use a lot of bandwidth and loads faster.
I use the settings from above, but it only works after I called Tech Support to have my account Provisioned. So they did, and when I browse around with IE using the WAP network, a message pop up on the browser saying that Wireless Internet Express is ready to use, click on Activate.
So I did and voila, it works like a charm. I also bought IP Dashboard to monitor how much bandwidth I'm taking whenever I use GPRS. While WAP uses my minutes.
Thanks again Abohsali.
Tips for you guys...
Here's a tip for you guys...
If you use the Pay As You Go Wireless Internet Express (WIX) then the settings above will work as long as you call Technical Support to provision your account. Then the GPRS settings above will work.
But, if you go with Media Works, the unlimited one with Unlimited Wireless Internet Express, then the settings above won't work. But interestingly, the WAP works for downloading email. Before, with Pay As You Go WIX, I have to switch to GPRS to download email. Now I just stay in WAP.
The good thing being in GPRS is that it uses your data connect only, not your minutes. While WAP uses your minutes, but not data. Someone here could correct me if I'm wrong?
Is WAP without WIX free, or is there a $ .01 /kb charge?
How much does the unlimited plan cost?
Whoops, hadn't realise you were in Indonesia
Hi
I apologise in advance because I'm sure my problem is simply solved but I;ve not used the XDa for a while and I'm back to square 1. I have tried searching for the anser but I think my question is just to basic.
My XDA2 is unlocked and I use a T-Mobile sim in it. The problem I have is with the TOMTOM. When i try to update traffic info on the fly I get a message saying modem hung up (or something similar). It works fine when connecting via the cradle and my PC.
Now I think this is because the XDA2 is trying to connect using the O2 settings when I am on the road.
So my question is how do enter and then I get the XDA2 to use the T-Mobile settings?
EDIT: Sorry forgot to say so far I have done the following:
Start
settings
connections
Add new modem connection
enrtered T-Mobile
selected cellular line (GPRS)
entered access point as general.t-mobile.uk
user name as user
password as wap
Ok and update
seems it is connecting after all. Problem is I have to connect via GPRS first then up date the traffic. It's not picking up the connection if I just update direct from TomTom
any ideas?
I don't think you can do much about that, cause the tomtom, must automatically try to establish the GPRS connection.. like Internet Explorer does, it automatically checks if you have GPRS or Wi-fi connection, if not connected for you automatically. after reading your post. it does not start your GPRS connection, have you look into the settings of the tomtom, to see if he has an option that you can let it connect through your GPRS automatically?
hello can someone help me with my internet problem. im using tesco mobile a sim card but my inernet explorer will not let me connect to any page. the gprs says im connected but no page. im phone is a mda 11i running pug 1.11.162 radio 1.04 camera fix o2 removed. this is starting to bug me now. thanks
Hello,
I think that you should check your GPRS settings and make sure that your proxy and HTTP/WAP ports are correct. Also check the rest IP/DNS settings.
Oh and of coarse is your GPRS access password/user name protected?
Cheers,
Tried using a Tesco SIM when I first purchased Wizard, problem with network will not let you connect. Another network is the only option, Sorry.
I have the t-zones unlimited plan on my account. This worked on my SX66 but stopped working when I upgraded to a Hermes.
Here are my current settings
access point name: wap.voicestream.com
HTTP proxy: 216.155.165.050:8080
WAP proxy: 216.155.165.050:8080
It seems to connect to GPRS and I see the "E" symbol on my signal strength but all pages time out. I tired IE and opera browsers
Hmm changed 216.155.165.050 to 216.155.165.50 fixed it... go figure
think that normaly with ip's the 0's in front are never typed out
could be that newer wm roms dident mask out those zero's
and faild because of it
T-Mobile internet Cabs
I've had this problem for the last couple of months. I just found this in the main Networking Forum. It contains ROM specific to your data plan. Mine now works fine, so your's probably will too. http://forum.xda-developers.com/showthread.php?t=311446
I just moved my SIM from a BA (WM5) to an 8525(WM6).. same internet settings, proxy, etc.. (T-Mobile Web) was working on the BA and now it just connects, and eventually times-out with the error 502 message. Tried radio roms 1.47, 1.48, 1.50, no difference. Moved the sim back into my BA and internet works still. What gives? I did look in the registry on the 8525 under tcpip and noticed the gateway address is the same as the assigned dhcp address. This shouldn't be. Using chaps 3.54b Lite ROM.. any ideas?
T-Mobile tech support did in fact verify that they were closing down the WAP apn. Are they capable of making these kind of changes without notifying customers? The reason I ask is they still have instructions posted on the web for configuring windows mobile phones for "Web browsing" using the wap apn and proxy.. as far as I'm concerned they have breached their contract for my paid services.. actually I'm not under contract and this might give me the reason to consider other providers.
UPDATE.. the Black X Beta 2 works with T-Mobile Web and proxy..
I´ll give it a try
Black6spdZ said:
UPDATE.. the Black X Beta 2 works with T-Mobile Web and proxy..
Click to expand...
Click to collapse
I have had a similar problem but in my case I have a Wizard not a BA, I´ve tried all kind of tweaks for
HKLM\Comm\Cellular Line\Parms\Tcpip and
HKLM\Comm\Tcpip\Parms
The default parameters looks the same for the Wizard and the Hermes except that the Hermes shows WINS addresses and the Wizard doesn´t (Please see my signature and provide your data)
I just did the update from wm5 to wm6 on my htc 8125. My phone is through ATT but did the TMobile Rom as suggested. Its now connected to the 3g network, I can receive texts but when I try to connect to the internet, it wont connect. Says, "cannot connect" Dialed wap.voicestream.com, cannot connect for an unknown reason.
Current connection setting:
T-Mobile Data
Cellular Line GPRS
wap.voicestream.com
User/pass-blank
I have an unlimited plan so I'm not sure whats going on, it just takes me to some t-mobile page when I click internet explorer.
Please help, thanks.
Enable AGPS on the TILT/Kaiser
I've been having the same issue where QuickGPS started giving me error messages, RDP couldn't connect, PIE would not connect, and OperaMini would connect whenever it wanted to.
I downloaded a cab file from SH4YD33 if I remember his name correctly. The cab did work for me for like an hour, then the QuickGPS message started coming up again. I found some other method that involves the registry and that worked for me
PIE, OperaMini, QuickGPS and RDP are all working again.
Ok this is how to enable it.
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"EnableAGPS"=1
Good luck
HTCWIIBOX
HTC Kaiser 8925
Ok. I found this page from att about the Dialed: Cannot connect for an unknown reason.....
****://forums.wireless.att.com/cng/board/message?board.id=mmode&thread.id=13271
I had MEdia Net set, but under number I had ims.cingular, not allowing it to connect. I dunno where that setting came from, but I selected EDIT, and entered wap.cingular, follow the instructions and it worked. I have internet back.
Hope this helps someone.
HTCWIIBOX
HTC Kaiser 8925
dustinmorris27 said:
I just did the update from wm5 to wm6 on my htc 8125. My phone is through ATT but did the TMobile Rom as suggested. Its now connected to the 3g network, I can receive texts but when I try to connect to the internet, it wont connect. Says, "cannot connect" Dialed wap.voicestream.com, cannot connect for an unknown reason.
Current connection setting:
T-Mobile Data
Cellular Line GPRS
wap.voicestream.com
User/pass-blank
I have an unlimited plan so I'm not sure whats going on, it just takes me to some t-mobile page when I click internet explorer.
Please help, thanks.
Click to expand...
Click to collapse
if your carrier is att then you are using the wrong network access point.
change homepage...