I have encountered a problem with the Power button, and it happens with all WM2003 ROMs.
If I turn off the screen with the Auto turn off or the power button the device does NOT turn on again with ANY of the buttons.
It is a problem I have encountered ONLY after upgrading the Radio Stack to O2 4.21
Does anybody have a suggestion on how to solve the problem?
Thanks
Daniele
Yeah its happening to me from time to time just wait a while dont push it more then once it need 10 sec maybe or less and the screen will turn on again by it self...
it even happens in reverse it wont shut off when u press the key on the spot it will take 2 or 5 sec to do so.
i think its a bug but not that big of a deal...
:?
this happens to me too, press off then wait 3-5 secs for the device to turn off. pain in the a$$
mine aint done it and im on v4.00.11 with v4.21 radio
gaz
Related
I keep finding the backlight on my XDA II keeps turning itself off, I have to go to the backlight menu and I find the "on battery power" backlight setting is set to minimum. It does this randomly with a fully charged battery. Might have to buy a torch if it keeps this up!!! Any ideas?
I thought I had the same problem, but it turned out to be my own fault.
My XDA II would be off and I'd press the [Power] button, to turn it on ... no backlight. I discovered, quite by accident, that if you press and hold the power button, it in fact turns off the backlight.
So ... when turning it on, make sure you just press the [Power] button and DON'T linger.
HTH
ardarby is quite right. It's a great option once you know about it to save battery... I use it all the time now, when I'm outdoors if you push and hold in the power button it turns off the back light. If you want it back on just do the same.. Push and hold the power button...
Nice one!
Cheers! I was on the verge of a 20 minute wait to speak to Orange support, thinking I had a hardware fault!
I had the same thing when I had my XDAI. Strangely it seemed to happen every time my gf had been using it, and in the end I worked out she had assumed to turn it "off" it was the same as Nokia's where you have to hold the power button down.
Saved me a similar call to o2!
Anthony
thanks for the hint, I had the same problem with my qtek 1010, that I got mad at my kids (poor kids) every time they used it I get it back with no back light. It is a bit different with the 1010, you press for power, and then you can toggle between back light on/off by a second long press on the power button.
Well, now I see no need to buy a new one :lol:
this forum is superb! My problem with backlight off solved again
Thanks all
Hi, first time posting! so hello everyone 8)
I got xda exec, i had this problem with the first rom and the latest one too. For some random reason when my phone comes out of standby sometimes my backlight is off. i struggle to see my screen and when i check my backlight settings (brightness level) "on battery" its set to off on the slider. When i set it higher my backlight works. Also my backlight button does not respond when this happens. It just randomly happens but im starting to notice it more and more. Any ideas peeps
Try:
1- pressing the button beside the volume slider.
or
2 - pressing and holding the power button.
Hope that helps
JAmes
jamfitz86 said:
Try:
1- pressing the button beside the volume slider.
or
2 - pressing and holding the power button.
Hope that helps
JAmes
Click to expand...
Click to collapse
thanks but i tried both, doesnt work. the only way it comes back is by going to backlight settings. Is there a file that could be corrupt that stores the information about the backlight settings?
Is the box "turn on backlight when a buttonis pressed or the screen is tapped"?
Other than that i've not got a clue. Someone who knows a bit more? any ideas?
JAmes
yeah thats ticked. the only way i get the back light to work when this happens is pushing the slider up, the one in the battery settings
seems real odd.
If noone else has a suggestion a hard reset might help, dont know if you've tried that yet. If you do this dont forget to back up everything.
JAmes
Hi,
I think it really is the POWER button: if I press and hold it for a few seconds, the slider goes to zero and the light goes off. Press and hold again restores the old situation.
Peter
My wife's Magician did this sometimes too.
Turned out that in her case it was because when you hold down the power button to turn the phone off (for a second or two) it doesn't actually turn the phone off, just the backlight. (Of course it all goes dark, so it looks like the phone is off if you don't check too closely.)
Then when you press the power button to turn it on again (after it's timed out and turned itself off), there's obviously still no backlight...
May not be your problem, but give it a check...
In nearly three months, I've had this happen perhaps four times. My device has the "on-battery" backlight set at one notch, to save the most power, and I guess something must just move it that one notch down to off.
So far there's been no uniform circumstance, other than it's guaranteed to happen at night under low street or room lighting so that I can't see the screen to get to and re-adjust the setting.
A hard reset doesn't help. I've reset numerous times with different ROM versions and had the problem reappear - but very infrequently as I said.
astage said:
A hard reset doesn't help. I've reset numerous times with different ROM versions and had the problem reappear
Click to expand...
Click to collapse
just wierd and a tad annoying lol, i tried all of the above ideas anyway, i thought it might be bad programming thanks peeps for your input
Not much help - I know - but my Exec does the same - annoying and strange with no rhym or reason
Jean
I've had this a few times. I've had to hold the power button in for a few seconds to get the light back.
i had the same problem, just comed up a week or so. not changed any settings either.. wierd bug
I have problem with power button. when push pwr button dont,t off pda, but when hold pwr then lights off.
Power is never shut off in PDAs, thats the way PDAs have been designed.
I have the same problem, he is not talking about a full power down. If you hit the power button quickly the phone does nothing. However if you hold the power button down for about 2-3 seconds the lcd light turns off as it should.
Because of this I have to wait 1 minute for the unit to suspend before putting it back in the holster.
Does anybody have any idea as to why this might be happening. Im not new at this so hard reset, soft reset.. new rom... new radio...turning up side down while chanting. It does not change......
It will do it right one or twice in a week.
Maybe somebody that understands the signal that the unit receives upon pressing the power button might be able to shed some light on this.... Again the button does seem to operate just not suspend when pressed normally (1 second or less)
I have done some more research and this seems to be a common problem for some with BAs but nobody has found out why. There must be some kind of common hardware fault.. Does the power button send only one signal or is it a multi signal device.
afbcamaro said:
I have the same problem, he is not talking about a full power down. If you hit the power button quickly the phone does nothing. However if you hold the power button down for about 2-3 seconds the lcd light turns off as it should.
Because of this I have to wait 1 minute for the unit to suspend before putting it back in the holster.
Does anybody have any idea as to why this might be happening. Im not new at this so hard reset, soft reset.. new rom... new radio...turning up side down while chanting. It does not change......
It will do it right one or twice in a week.
Maybe somebody that understands the signal that the unit receives upon pressing the power button might be able to shed some light on this.... Again the button does seem to operate just not suspend when pressed normally (1 second or less)
I have done some more research and this seems to be a common problem for some with BAs but nobody has found out why. There must be some kind of common hardware fault.. Does the power button send only one signal or is it a multi signal device.
Click to expand...
Click to collapse
Do you have a problem with turning on? First, we need to know whether it is hardware issue or not...
What you can do in the mean time with the turning off problem is by installing a poweroff app like shutdownme, psshutxp, etc etc...
Absolutely no problem with turning on from standby... Right now i just lock the phone before placing it back in the holster.
To make it clearer if you HOLD the power button down the backlight will turn off only. It will still show the display image and keys will still function (it dims)
Well, I had the same issue with the latest WM5 ROM. I thought I was too stupid to press the button, then I thought the button was broke, then I thought, I'll have to live with it.
Now that I have flashed to WM6, no problems at all! Never even came to my mind that this problem once existed. So I guess that some ROMs just have this particular bug?
Stefan
I have tried all the roms as well as 2003 and have the same issue in all of them. And im not alone.
Power off Problem
I'm in same condition.
Had the same problem when using WM2003 second Ed.
Now I've installed WM6 but nothing changed:
I cannot power-off/suspend but can turn off backlight if press and hold power button.
When in standby the button works fine to turn on the device.
Also, sometimes volume turns up continously with "noisy" beep ...
Anybody solved this problems?
Thanks,
Ruben
(WM 6 - 5.60.00 build 18125.0.4.2
radio 1.12.00 )
Power button has two modes:
1. Click mode: Click it once for a short duration. This turns off backlight and can be resumed by pressing it again or by pressing OK button
2. Press and Hold mode: Press and hold for few seconds and release. This mode will dim the backlight and no other button will bring it back. This is some kind of deep sleep in battery mode. To resume the original setting, press and hold Power button again for few more seconds.
(p.s.: I am not sure if this behavior is true for all the BA models)
April 1,
I know these modes...
It seems that "mode 1" doesn't work at all...
I would activate "Button Lock" (settings-->button--> Lock(tab)--> "lock all buttons except power button") to turn-off backlight and "lock all buttons except power button" but I cannnot...
You solved this problem?
I have had this issue of not being able to power off. One way I always got out of it was by clearing the registry hive. Unfortunately this brings the PDA back to the basic ROM. At this point the power button worked without any issues. Upon reloading the software the problem may come back. I believe the issue is related to some programs. I can't recall which program it was that seemed to cause the issue. One other thing I think that also worked was just entering the registry and getting back out and doing a hard reset.
I had the same problem with my 6600. the message button also didn't work. Believe it or not, to fix it. I banged the lower half (4-way area) on my desk a few times. Not hard enough to break the screen. But prolly hard enough to free what was prolly a sticky key. And now everything is working.
i am too
the same ...
when i press the power quickly , nothing happen
when i press the power for 2 sec. the backlight turns off
i tried every thing .... including formatting my BA
any one solve it ???
I have this same problem, my power button does`t work. i tried installing different roms but without any chance to fix it. maybe its an mechanic issue. i will change pwr button, i hope this work.
Look at one of my previous posts. I fixed it, twice, and other users have used the same metod to fix it. I think the problem is "hung bit" hardware related because you can also send it in for service, and they will change a chip, but i never had to.
When I'm using the original ROM and I press the power button, only the display is turned off (to turn off the phone I need to hold this button).
Since I've used ELF USPL - CID Unlock to unlock and flash the ROM I can't turn off the display. When I press the power button, the display will turn off, but within a few seconds the phone restarts, like a soft-reset.
When not using the phone, the display should turn off within 2 minutes. But when it is turned off, the phone will restart in a few seconds. So the display will never turned off and the phone will reboot every 2 minutes when not used.
Anyone who knows how to fix this problem?
Hi... sorry for my bad english... i have the same problem! Did you have found a solution for this?
If we restore to the original version/state of the CID, did it can be resolved?
Regards...
Nelson
Hi, I have this problem with my SG3 (XXJPF),that I cant shut down calls,because the screen wont turn on. Is this problem only on JPF,and how can I fix this? Thx
I left this stock rom a few months before, but i remember the screen turned on after a few seconds (turned off by approximation sensor before). It must recognize your ears dissappeared...
Personally I would flash another ROM there's plenty to choose from
However if you haven't voided your warranty you could always get it checked out.
Sometimes it does,sometimes it doesnt and It can be really annoying. I think I ll try jpm
Let me know if it fixes it - if my suggestion helped you I would be grateful if you could press the Thanks button. Cheers
I just press the menu button then it lits up.
You can end the calls using the power button.. Settings-accessibility- check power button ends call..