Hello!
I want to change my device identification number. One program generate authorization code from this. Anyway to change this number? I see my hardware identification number in pocket hackmaster.
Do you mean IMEI number??
No. HW identification number. Pocket hackmaster show this.
everybody ? ((( This is not IMEI number.... this is Pocket PC SERIAL number.
pocket hackmaster -> info -> System information -> Serial Number
This is a 17 digit identification number
I can only find pocket hackmaster for PALM, where is it to download for pocket pc or xda please.?
Related
Is there a function in the menu of the Qtek 2020 allowing to provide the identification of the number to the person we 're callingfrom the qtek2020?
Re: provide identification of your phone number by the recei
ennzed said:
Is there a function in the menu of the Qtek 2020 allowing to provide the identification of the number to the person we 're callingfrom the qtek2020?
Click to expand...
Click to collapse
*31#number sends the caller ID information,
#31#number withholds it
*#31# queries the default.
If I try that on Mobile USA XDA, I get the message "service disabled." But I can withhold caller ID on a per-call basis by adding *67 before the phone number.
Checking in my MDA-II I've seen two different IMEI numbers. Does anybody knows what the deal is?
IMEI 1 by pressing *#06# in the phone dialer.
IMEI 2 by going to the settings -> system panel -> device information -> identity panel.
Greetz...
its the same IMEI but if u press *#06# u'll get full IMEI, in device information -> identity panel. it miss two digit.....
:lol:
Thx, you're right.. I didn't count the numbers and only looked at the last four digits....
:wink:
I have lots of my contact numbers stored as numbers like +44 (0)1234 567890. However, when I try to dial it on my MDA Pro, the phone dialer complains about the '(0)'. Does anybody else have this problem and is there a solution (other than updating all of my contacts !)
Thanks
Peter
I doubt if there's an easy solution.
Non-standard phone numbers just wont dial in Windows Mobile. Looks like a conversion will be necessary. Sorry!
Paul from modaco once wrote a tool called something like outlook tools, that converted numbers with international codes etc.
See if you can find it, or complain and PM me.
V
MS Bug in telephone codes
I discovered this years ago that Outlook does not allow you by default to store a number in a usable format. Way back in 1999 when i was using some TAPI software to dial the number on my phone from Lotus organiser using a standard modem and a 2 way telephone jack, everything was cool.
Then when the company upgraded to exchandge server and Qutlook we lost this simple capability. We just got used to in putting all numbers in E164 format ie no leading 00 and the ful international code.
But there were lots of apps for outlook that came out for phone day in the uk when we changed to the 01 and 02 number prefixes. They just editied all of the numbers in the outlook data store. You can probably find a shareware or free ware app on www.download.com
http://www.download.com/Outlook-Tools/3000-9694_4-10432268.html?tag=lst-0-1
Good luck
Charlie
OK, so that wasn't the answer that I wanted but I guess that I have no choice. Oh, for my Nokia phone back .....
the 0 issue
Actually you don't need to input the (0) in neither Outlook and PDA. Here is how I do this:
In desktop Outlook, always input telephone in this way: +44 (1234) 567890. (
I suppose 1234 is the area code, if no area code, plesae make sure there is a space between +44 and subsequent number)
Sync to your PDA, and when dialing direct from Contact, Although the PDA will dial +44 (1234) 567890 but actually it's still a national call as long as you are in the +44 country.
When dialing direct from desktop Outlook, it will automatically remove the +44 and add (0) in front of 1234 if you correctly setup the country code and area code in your Outlook.
All my numbers are +44 (7777) 777777 on purpose so they can be used if I'm abroad. If you have the +44, AFAIK there's no need to have a 0 anyway.
Cheers
Ant
here's a same problem just from a different angle...
Sorry it's not a solution but here me out:
Topic: the mess Outlook and phone dialer phone number format made...
How do you people keep your contact's phone numbers? In which format?
I keep my PC Outlook contacts in the Windows phone dialer correct format
i.e. + [international code] [ (area code) ] [number]
when I inport/sync these contacts with my Qtel9000 I get all the contacts exactly as I entered them in Outlook but the Qtek 9000 wont dial correctly
FACTS:
fact no. 1: Outlook separates phone numbers in groups of>
country code
long distance code (area code)
number
fact no. 2: phone numbers entered this way are stored in a format>
+381 (064) 6185250
fact no. 2: Microsoft Phone Dialer recognises this number and dials correctly
via a voice modem... (headset or speaker/mike required)
Question: what hapens when contacts entered this way into Outlook are sunchronized with the
Pocket PC (Windows Mobile 5.0)?
Answer : all contact's numbers are entered into the Contacts list in the 'correct' format.
(the same format with the bracket, as is noted in PC Outlook)
My findings: the problem arrises when you use your mobile capable Pocket PC
(i.e. the super cool Qtek 9000) and try to dial someone on to his mobile or office phone that are on another
area code...
the Pocket PC, or Windows Mobile 'Phone dialer' dials EXACTLY
as the number is entered in the above mentioned format
(the mobile operator recognises the + at the beggining of the number, but
does not understand the spaces and the brackets!!! and offcourse
the mobile operator returns an error voice message that a wrong number has been dialed!
What am I to do?
Can I find/download/install a proper phone dialer (i.e. MS Phone Dialer) that comes with Windows?
Phone Dialer 1.5
Developed for Microsoft by Active Voice
http://www.activevoice.com/dialer
bottom line is that CISCO systems aquired this Phone Dialer in 2001 and Active Voice discontinued developing/supporting whit app. (link on the Active Voice site is outdated and no support on MS site, as well)
(please do not post solutions as: "you should reformat your number entries etc. because I have 800+ contacts and counting...)
P.S. what I gathered is that this is not device related it is just OS and app related. I had the same problem with my previous Nokia phone... (I did not solve. Actually I thought I will solve with this device...)
I've set the Dialing Rules with my country code and area code (Mobile etc.) So, I don't have a clue what am I doung wrong
I Am Looking for an application witch can find a name by an number on the internet like: http://omgekeerdzoeken.nl
Somone calls me with a visible unknown number then the application shearch the internet(telephonebook) and tells me the name or the company of the number.
Is there some application witch can do that?
sharksp said:
I Am Looking for an application witch can find a name by an number on the internet like: http://omgekeerdzoeken.nl
Somone calls me with a visible unknown number then the application shearch the internet(telephonebook) and tells me the name or the company of the number.
Is there some application witch can do that?
Click to expand...
Click to collapse
something like this?
http://forum.xda-developers.com/showthread.php?t=424923
it's for numbers in Norway, but if u know some programming u can make a dll plugin for your country...
That would be an excellent app.
Hi
My phone displays the wrong serial number.
In Settings>About phone>status shows e70**** but on the label under the battery is R21D*******.
Is it possible to change the serial number for correct?
kondzio66 said:
Hi
My phone displays the wrong serial number.
In Settings>About phone>status shows e70**** but on the label under the battery is R21D*******.
Is it possible to change the serial number for correct?
Click to expand...
Click to collapse
Hi
That is odd , check with this app
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
Is the phone new , maybe is been refurbish...
Changing the serial number or Imei is not easily done or legal.......
I only want to change the serial number of the phone for number from stickers
In attachments screenshot from Phone Info app.
kondzio66 said:
I only want to change the serial number of the phone for number from stickers
In attachments screenshot from Phone Info app.
Click to expand...
Click to collapse
Mate
Based in the picture you sent and what you said before, everything is ok, you have the Samsung serial number and the device serial number
http://developer.samsung.com/technical-doc/view.do?v=T000000103
Why samsung serial number are different than Android serial number? When i used touchwiz Rom serial number in settings>about phone>status was like SN in label under battery.
On a stock Samsung device, the serial number in About Device > Status should be the Samsung serial number. That number should match the label beneath the battery. A custom ROM, even based off Touchwiz, may not necessarily use this number but instead use the Android serial number.
Now, as to why the Samsung serial number is different from the Android serial number, you need to ask that of Samsung. Just don't expect an answer.
I thought that SN was damaged when i flashed cm12.
Thanks for reply
Sent from my GT-I9505 using XDA Free mobile app