Related
There's two type of ROM upgrades: Operating System ROM upgrades and Radio Stack Upgrades.
Radio Stack Upgrades:
Radio Stack upgrades are distributed by the devices resellers. They come in packages with names that may or may not include "Programme B" or "RSU", and they are usually about 2 MB in size. Version numbers are a mess, and lower version numbers do not mean earlier versions. There's at least three different paths of version numbering out there, and the version number on the file doesn't always match the version number displayed at boot and by 'Device Information'.
The official Radio Stack Upgrade process is a mess. We've seen way too many people wreck their devices doing nothing weird or strange. Our advice regarding Radio Stack upgrades is to get them from your own device provider (so you know it's for you type of device: 900/1800 or 900/1900 MHz), and to only upgrade if you know the upgrade will fix known issues that are bothering you.
Operating System Upgrades:
Operating System upgrades are distributed by the resellers in packages whose names may contain "Programme A" or "RUU" (to confuse things, RUU stands for "Radio Unit Upgrade", even though they do not upgrade the Radio part but the PDA part). Operating System upgrades are usually 15 MB in size, and unless you use our utility 'adaptROM', they will only install on phones sold by specific resellers in specific markets.
In this community, the OS is sometimes also distributed as .nb1 file, for use with our XDArit tool. These files are often zipped to about 15 MB, uncompressed they are 32MB (well: 32 MB minus 256 kB actually).
We've seen a number of people doing terrible things to their devices by upgrading their OS ROMs. Here's what we've seen:
- It appears someone is distributing an EXE file for the PPC2003 ROM that contains a part of the OS in the spot where the bootloader needs to be. People that use this EXE to upgrade to 2003 may experience problems immediately or later on, possible making their device unusable.
- We've observed our XDArit tool in the hands of people that should not be using it. If you don't know what a DOS box is, or think you can rename .nb1 files to .nb0, or if you generally do not feel technically proficient, do not use XDArit. It's as simple as that.
(We also blame ourselves for this: XDArit is very counter-intuitive in some parts, and is long-due for an overhaul....)
- Apart from the above, there seem to be problems for people getting back from PPC2003 to earlier versions of the OS. We've been busy doing other things, and we haven't really researched this yet.
- It seems the exe files Jeff makes are OK, and if they aren't, people would know pretty quickly. We advise against running exe-files from others until we've found what causes this 'bootloader mangling' we've observed.
Thanks for your warnings. I just checked my device information. It reads rom version 3;14.06 ENG, Rom date 10/01/02, Radio Version T313. Being not technical at all. Your advice is not to upgrade the Rom or de radio version.
But that leaves me with some problems. F.i. when I try to synchronize with Outlook on my pc. I keep losing mails. The only mails being synchronized at all are those from my inbox. A series of attachments cannot be converted and there is no way to know which mails they are in. I was also hoping that a rom-update would solve my constant memory-lack.
Are there any other solutions?
Upgrade Fails
We have been upgrading some ATEK's with success, but we have two that don't want to upgrade. The message is:
"Can not open COM/USB port...." \\Can someine help...
Re: Upgrade Fails
scalci said:
We have been upgrading some ATEK's with success, but we have two that don't want to upgrade. The message is:
"Can not open COM/USB port...." \\Can someine help...
Click to expand...
Click to collapse
:wink: it's same problem that i have but the slution is download the XDA-dev's XDAtools.exe and cook your ROM then save it on your SD-card
for me it's work 100% my Qtek provieder in Saudi Arbia said that you can't downgread ROM after you do upgread but what ?? it's work
:lol:
[email protected]
Upgrade radio fail
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
After upgrad radio from 4.16 to 4.21, My O2 does not reset or hardreset normally. After a long process, I get a blank screen with only input icon on the lowwer right corner. How to fix it now?
problem solved.
inaccess said:
problem solved.
Click to expand...
Click to collapse
How have you done it ?
Re: Upgrade radio fail
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance
Re: Upgrade radio fail
darkdragoon said:
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance
Click to expand...
Click to collapse
If you push the power buttom and than do a hard/cold reset do you get a bootloader ???
If so you need a storage card and put a good rom on it.
Read more on this forum
Re: Upgrade radio fail
I got a problem yesterday night, while trying to updgrade the ROM with the XDA developers Special Edition ROM v1.2, I got the message from the tool saying it will take up to 5 min and a scroll bar appeared on the XDA and not removing it from its base.
But I accidently removed it (in fact, I caught my foot on the damn wire and everything went to the floor).
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
The screen when I hard-reset it shows the scrollbar that was displayed when I tried to upgrade it.
ActiveSync does not recognize it anymore (PC beeps when the XDA is put in craddle, but it does go further).
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
I own a SX-56 and subscribe to Rogers AT&T; I guess my config is identical to a AT&T phone, as it's written on top
Any suggestion will be welcomed
Bernard
Re: Upgrade radio fail
droletbe said:
I got a problem yesterday night, while trying to updgrade the ROM with the XDA developers Special Edition ROM v1.2, I got the message from the tool saying it will take up to 5 min and a scroll bar appeared on the XDA and not removing it from its base.
But I accidently removed it (in fact, I caught my foot on the damn wire and everything went to the floor).
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
The screen when I hard-reset it shows the scrollbar that was displayed when I tried to upgrade it.
ActiveSync does not recognize it anymore (PC beeps when the XDA is put in craddle, but it does go further).
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
I own a SX-56 and subscribe to Rogers AT&T; I guess my config is identical to a AT&T phone, as it's written on top
Any suggestion will be welcomed
Bernard
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.
Re: Upgrade radio fail
Weezer-DC said:
darkdragoon said:
pcloo said:
Thanks for the advice. Unfortunately I read it a bit too late.
I download ROM from O2 site, program A (3.20.06ENG) and program B(4.21). Upgarded my xda with program A, after reset it works. When upgrade the radio program B it hang for half hour. After reset the xda does not boot!
Is there a way i can flash back the ROM so that i can use back my xda?
Original version ROM 3.17.03ENG and radio 3.14.
Thanks in advance.
Click to expand...
Click to collapse
I did the exact same thing and had the same problem. anything I could do to had my xda up and running again?
thanx in advance
Click to expand...
Click to collapse
If you push the power buttom and than do a hard/cold reset do you get a bootloader ???
If so you need a storage card and put a good rom on it.
Read more on this forum
Click to expand...
Click to collapse
Yes, I got the Wallaby bootloader and it said GSM failed.
Pls show me where about I could get more info on the forum.
ThanX in advance.
Re: Upgrade radio fail
Weezer-DC said:
droletbe said:
...
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
...
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
...
Any suggestion will be welcomed
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.
Click to expand...
Click to collapse
Any place/URL to look for such thing as the ROM and the writer ? How much should I expect ?
Thanks for your help
Re: Upgrade radio fail
droletbe said:
Weezer-DC said:
droletbe said:
...
Now nothing works, except the diagnostic bootloader when I reset and press on button. Hard reset changes noting.
...
Any idea how to put back original ROM content ? I have backup of the content made with Active Sync.
...
Any suggestion will be welcomed
Click to expand...
Click to collapse
You need a storage card (32 MB or more SD or MMC will do) and a reader/writer for it,
than write a rom on the card, put it in your devices an start the boot loader, than if everthing went good it will ask you if you wanted to update the rom.
Click to expand...
Click to collapse
Any place/URL to look for such thing as the ROM and the writer ? How much should I expect ?
Thanks for your help
Click to expand...
Click to collapse
Now everything works ! And this accident "forced" me to buy an SD, so I will not be so limited by the 32Mb limit
Thank you very much
help needed....
i hard reseted my qtek 1010 .... its like 30mins ....and am still gettin 4 bands white red greem blue... is that normal ...that hard reset take this much time... if this si not normal ... what should i do next
Bootloader not recognising sd card image
I am having the same problem. When pressing power and reset, bootloader shows v 5.17 GSM fail.
I have an sd card which has a new bootloader and nb1 file on it. I do a reset with the card in the slot and i get the same screen v517 GSM fail. From what i have read i should be getting an option to upload the new rom.
Can some one help me out please?
If I currently turn the device on normally activesync does not recognise the device.....
The sd card I have was configured using the xdirt programme and it appears to have worked as the sd card is shows not formatted now...
Thanks for all the info and warnings, just got my XDA II today and Im not too hot with it yet so I guess I will be leaving the ROM's alone for the time being
Peter Poelman said:
Radio Stack Upgrades:
Click to expand...
Click to collapse
We have several system where the GSM rom is toast. Is there a way to get a GSM Rom to SD w/o using the PC Monitor program?
The systems will successfully bootup and we have tried loading the GSM rom using RSUpgrade, but it fails after 1%.
Is there any other way to recover the GSM Rom?
You may try speaking to Cgigate on this forum, he has hardware methods of programming the chips directly, whether it works for the radio stack as well as the bootloader and rom you will need to ask him.
Hello all.
i have been searching the forum for the solution of this problem, some guys suggested solutions that involve a file that is no longer available, upgrade.zip which is aparently a radio upgrade(or downgrade) made for the SD card (a startup.exe in a startup directory).
Well, having said that, i had to solve this problem last night, and here it goes.
after trying original ROM upgrades, all versions, 3.14,3.17,3.18~4.
nothing worked.
finally, i grabbed a copy of xda-developers's 1.1 ROM
and guess what!!!
the phone started up, gave me the screen allignment and the whole menu!
sure enough, ran file commander(that version did not have file manager) copied the RSU files over to the windows directory, and the exe file to the windows\startup and rebooted the phone.
it stopped at 1% again... NOW REMEMBER, i had an EMPTY BATTERY...
the 1% ERROR is a battery issue, that turnes into this issue when the modem upgrade FAILS.
so here is what i did. and you be the judge.
i ran active sync from the phone, and it did connect(while the upgrade program is still running) and left the room/
in 10 minutes i came back and the upgrade was completed, so here is what i think
i think that the RSU will still run if it was in the background!!! even with an empty battery(connected to the charger ofcourse.
i did not have much time to do anymore testing, but i am sure that someone with the same problem will make the time. the key from my experience is that the proccess will complete if it is in the background.
there u have it.
good luck.
i forgot to add that the upgrade i used was taken from yorch's page and it was the latest Tmobile, i had to downgrade later to an older version that i have to solve the network issue, but it was done(the downgrade) like a charm, i had a full battery then.
here is the Tmobile RSU link v6.24
http://www.yorch.net/downloads/ROMS/TMOradiostackupgradeR624 .zip
a 1.26 MB file.
Hi!
Now I'm taking a try (unfortantely I've found only the special edition rom 1.2).
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
One more thing: maybe the version of active sync counts? Mine was 3.8.
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
LumpiStefan said:
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
Click to expand...
Click to collapse
Thanks, Stefan! Maybe this one will help...
Hello to all, and mr stefan,
I upgrade my qtek 1010 with SFX56 windws 2003, it also upgraded my RSU, which is not working in Middle East. Kindly advise me how to downgrade or upgrade with other RSU. Thanks
your problem is in the network selection, search the forum for the proggy that changes it from 1900 to 900 and you should be OK.
i hate telling anyone to search i know how hard it is, but i do not have a clue where the proggy is, meanwhile, if i run across it, i will point it out,
if not, go to the bootloader, select GSM and change it from there, you will loose all data so backup first,
Good Luck.
search for "bandwith switch tool"..... good luck.
here it is on wiki
http://wiki.xda-developers.com/index.php?pagename=BandSwitchTool
tell us if this fixes your problem.
if not, you will find links to radio upgrade on
[/url]http://lumpistefan.dyndns.org/tools/ thanks to LumpiStefan
for a great resource.
good luck.
never knew you can post as guest
well, again, let us know what happens.
hi all
I just picked up a XDA from a guy who screwed up the radio stack upgrade (it cosy me @$80 USD ) and im now on a mission to fix it...
using your advice I used the XDA developers rom 1.1, this got the phone to start up with the working today screen and menus etc....
I install/copy over the new RSU upgrade files over and reboot
but here is where i get a bit stuck...
I cant get into active sync fast enough before I get the 1% RSU upgrade error, so the upgrade wont run in the background, it just sits there....
how do you get into active sync before the error comes up?
cheers
MADMAX
I have the following in the extended rom on my JAM and am trying to save space so which out of the following need to be installed thanks :
Default_Backkeysound_RC10
Default_Caller_ID_WWE_RC10
Default_Delete_vdisk
Default_imateV1.00.10
Default_JMM101257_wwe_1004
Default_KSE_Fax_v2.09_unremovable
Default_MMS_V2.0.0.16_WWE_1115
Default_Patch_103_3
Default_Phonepad_WWE_RC10
Default_Smartdialing_WWE_RC11
Default_Version_WWE_103143.sa
Also what is each 1 for,Thanks
I'm trying to find out the same thing. Hope someone can help.
Default_Backkeysound_RC10
Installs a MIDI file for Back Key
Default_Caller_ID_WWE_RC10
This is the Caller ID application (consumes memory, but necessary if you want pictures pop up when ppl call you)
Default_Delete_vdisk
Not sure about this one!
Default_imateV1.00.10
Installs the imate splash screen, plus some other imate visual customisations.
Default_JMM101257_wwe_1004
JAVA patch - Recomended to install
Default_KSE_Fax_v2.09_unremovable
TrueFax software, allowing you to send/recieve faxes - Consumes lots of memory.
Default_MMS_V2.0.0.16_WWE_1115
MMS patch. Without it MMS will not work properly!
Default_Patch_103_3
Not sure about this one. Name suggests it includes patches for the 1.03 ROM version. I would install it.
Default_Phonepad_WWE_RC10
IntelliPad software that allows you to search for names in the Phone app. I like this one.
Default_Smartdialing_WWE_RC11
Not sure about this one!
Default_Version_WWE_103143.sa
Not sure about this one either.
Help please!
How can I make visible the Extended ROM?
THX
Simple run \windows\loadvdisk.exe
Darek
Thanks
kta said:
Default_Backkeysound_RC10
Installs a MIDI file for Back Key
Click to expand...
Click to collapse
What exactly is "back key"?
Just to complete:
Default_Delete_vdisk
Just makes the extended_rom invisible again.
Default_Patch_103_3
I've heard it updates the battery, radio and some other internals. Unless you have a problem I don't see the need - you can't shift this stuff from \windows so it will eat memory. Personally I'm just going to wait for the latest ROM update, then the above wll be out of date.
Default_Version_WWE_103143.sa
Updates some registry info, no practical effect that I know of.
Can't run LoadVDisk.exe
I can't run LoadVDisk.exe with my Mini, I can see the file but it won't run.
Is it locked ?
Or should I make changes with registry first ?
Thanks
Great thanks alot guys
Re: Can't run LoadVDisk.exe
Dihon said:
I can't run LoadVDisk.exe with my Mini, I can see the file but it won't run.
Is it locked ?
Or should I make changes with registry first ?
Click to expand...
Click to collapse
You simply click on it! It doesn't display any message. Then you can access the extended_ROM...!!
Thanks guys great help. I personally did not install anything and my phone works still. Even without the patches. I will probably wait for rom update as well.
After watching for months the issues that many have suffered over this problem, I finally found a solution that will fix all the woes.
A few months ago I was one of the many here that upgraded to 1.11 ROM, had the problem. It drove me crazy to the point that I went back to the 1.06 ROM that was rock solid. Well the other day I did a hard reset to have a clean slate. While looking at the Extended ROM I saw the file DefaultV_1.12 in the EXT Rom (Compared 1.11 ROM on FTP to my device). This was the same file that a XDA developer member had modified to somewhat solve the GPRS problem a few months ago.
At this point I had a hypothesis, so I pulled the same file from the older 1.06 ROM which was rock solid and did not have the “Cannot Connect” problem. In this EXT ROM it is named Default_Version_WWE_106150.sa.CAB.
Installed it first on my Blue Angel as a guinea pig, then for the next three hours I would sit there and disconnect and reconnect. I did it manually by holding the red button to disconnect, then I would reconnect to another webpage, then would have a call come in while in the middle of the GPRS session which would suspend it. After done with the phone call I would reconnect manually by clicking connect as well as by just hitting a link on the webpage.
The Results: No “Cannot Connect” problem.
So off I went to my Magician:
Upgraded to 1.11(I have 850 JAM)
Installed Default_Version_WWE_106150.sa.CAB
Put the phone through its paces, I have been disconnecting and reconnecting without a single problem. I receive phone calls that suspend the GPRS session and I am able to reconnect without a problem. Activesync is able to make OTA connections without a hitch.
During my trials I used the same programs:
Which included:
Photo Contacts(newest version)
Activesync
WEBIS Mail 2
xVbar
PocketZenPhone
Regking 2003
As the only variable throughout the trials was Default_Version_WWE_106150.sa.CAB
This is the solution folks.
At least until someone says it does not work.
Installation Steps:
1. Download CAB that I have attached.
2. Copy over to device
3. Install
4. Soft Reset.
1st of all let me say this is a great site for the HTC devices, I found it years ago when i had the first XDA (Wallaby i think) and now i own a O2 Mini.
I have just installed your patch and i'll let you know how it goes.
I wonder if this patch does the same as the "downgrading" of the caller id as detailed in this thread: http://forum.xda-developers.com/viewtopic.php?t=20428
The downgrade has been succesful for blue angel users too.
randomshots said:
Installation Steps:
1. Download CAB that I have attached.
2. Copy over to device
3. Install
4. Soft Reset.
Click to expand...
Click to collapse
Many thanks for posting this information.
For a relative newbie like me who has never manually fiddled with ROM files, can you please explain what I actually have to do to "install" the CAB file, i.e. in which directory on the device do I put it, and how do I run it?
- Peter
Once copied over to the device just place it where you can find it using the file explorer. Once located using the file explore simply click on it and it will install on its own. Do a soft reset and enjoy.
Crisscross: The Photo Contact solution that people have found only alleviates the problem a little, not entirely.
In my trials it has solved my problems completly. I wish for other members who try it out to report back as well to see whether all my trials were just a fluke, or our solution.
don't work for me
don't work for me. same problem as before, can't connect due unknown reason.
thanks anyway.
Orcas what is your ROM?
randomshots said:
Crisscross: The Photo Contact solution that people have found only alleviates the problem a little, not entirely.
In my trials it has solved my problems completly. I wish for other members who try it out to report back as well to see whether all my trials were just a fluke, or our solution.
Click to expand...
Click to collapse
The downgrade of caller-id to an earlier version has also solved the problem totally for me and several other people, both blue-angel and magician users. Thats why I was curious just what your patch did. Seems that it is something similar, you are maybe downgrading more of the rom?
Did you try downgrading of the caller-id first? Not just photo contacts but downgrade to the specified earlier build of caller-id?
randomshots said:
Once copied over to the device just place it where you can find it using the file explorer. Once located using the file explore simply click on it and it will install on its own. Do a soft reset and enjoy.
Click to expand...
Click to collapse
Hi there,
Just thought I'd report that I've just installed it. My ExtROM now reports as 1.06.150 WWE.
And... so far, so good!!! I've connected/disconnected to GPRS multiple times, interrupted GPRS with a phone call and then reconnected, have sent files to my device via BT while GPRS is on, and still no problem. It's looking very good!!!
And I'd swear it connects faster than it did previously.
Anyway, I'll keep hammering at it over the weekend and report back on Monday.
Thanks again randomshots!
Well, I'm back already, because I still have the problem. DARN IT!!!!!! :x
The thing that made it happen was that I made a phone call while GPRS was on. When I ended the call and tried to reconnect to GPRS, I got the blasted error. So it seems that receiving a phone call does not cause the error to happen, but making a call does. At least for me.
Oh well, it was worth a try. Back to the drawing board.
Same problem in Hong Kong
I upgraded to ROM v1.11 a few days ago and since then I have the GPRS connection error after 1 or 2 connections. Soft reset will solve the problem. This problem was not encountered at all before the ROM upgrade. It must be the new ROM that mess things up!
As this "default cab" from an old rom seems to solve the problem and also an older version of caller-id solves it there is probably something wrong in the communication between caller-id and some of the customisations from this cab on newer roms. Btw the problem is also in 1.12 roms.
Nice too see that we have two possible solutions here, I will stick to the downgrade of caller-id as it has solved the problem totally for me but it would be interesting to know what the real cause is...
Hi again. Just to answer the previous question to my post: my rom version is 1.12.00 WWE, radio 1.12.00, extrom now says 1.06.150. i think the only thing this cab changes is this rom number, nothing else
orcas
orcas,
I believe you are absolutely right. When the extended rom has finished installing the programs, it runs this .cab file to 'brand' the Magician with the build number. Nothing more or nothing less. But faith can move mountains, as we all know...
I guess some of you know that there is another (older) thread about GPRS problems. If you do not, there is a link below.
Anyway, I finally tried the most recent suggested fix in that thread (downgrading the device's CallerID program to an earlier version) and like a number of others I can happily report that so far, it has fixed my GPRS cannot connect problem. Looking good.
Here is the thread:
http://forum.xda-developers.com/viewtopic.php?t=20428
- Peter
Just thought I'd share that the second fix I tried (downgrading CallerID) has continued to work for me. I have no more problems with GPRS. All is well with my Magician. At last.
Here is rom with new Radio ROM 1.04
http://extendedsystems.dk/download/qtek/2020i/WWE_Sonofon_11100_165_10400_Ship.exe
Enjoy
Thank for the new radio, but some how I got country erro on the processing upgrade.
Please Help.
is this for the xda 2i please ..only asking as i'm not sure
thanks
This rom is only for Alpine phones, thats the 2i, 2020i etc.
As soon as my broadband is working again (tomorrow hopefully) I'll post the O2 162 rom with the radio 1.04 update for the UK users and anyone else who wants it.
If you want to try this update on the 2i you will need to extract the files from the installer and locate a copy of maupgradeut_noid.exe and use that instead of the included installer. There are better instructions elsewhere on this site, just do a search for my name, I'll be in amongst it all somewhere.
cheers i'll give it a go but if you are doing it maybe i'll wait ,i've only just gone back to your old 1 tonight as i don't use blackberry & it seemed better than o2 update
I have just posted the ROM upgrade on the ftp site, the only change is the radio from 1.03 to 1.04. It seems to give a better signal strength than version 1.03 on my phone anyway.
Here's the link to download the O2 version I just combined
(Edited to working link
ftp://xda:[email protected] XDA_IIi_Upgrade_v1.11.162_Radio_1.04.rar
1: Backup your contacts/device to Storage, Storage Card or PC. If you are using Ext Rom 1.11.162 now you can use full device backup to restore at the end to save you re-installing all your programs later.
2: Extract the ROM using Winrar to a folder of your choice.
3: Run MaUpgradeUT_Noid.exe. The install will fail, don't worry, just run it again without touching the phone.
4: When the upgrade has finished, do a hard reset by pressing the power button and reset button at the same time.
5: Install any programs and any data you backed up during step 1.
Good luck.
Excellent stuff
Upgraded and now running 1.04 radio and i can also say it has improved my signal strength too
Big thanks Pug for your work on the ROM image too, very much appreciated.
Hear, Hear. Many thanks to Pug, great work!
many thanks to Pug,
its work perfectly.....no more lag of ringtones or lag after green button pushed!! thanks Pug.....
i want to know about backup, after upgrade ROM, i cant restore back by backup. When using Backup Sprite, i will go back to old ROM after restore complete. any ideas????
@ Clustered
When you say it goes back to the old rom do you mean that the Radio rom is regerted back to 1.03 or that your extended rom goes back to 192 or whichever you are using?
Sprite backup should not revert the radio rom back to 1.03 as it should only do the file system of your device.
As far as the extended ROM version, all it is there for is to indicate the "update" status of the extended ROM and what software is installed in it. An asian rom may have a higher rom version but may be no newer or better than the european 162 rom. You're talking about comparing hedgehogs to wibbles, completely arbitary. As soon as you cook the extended ROM like I have it is completely meaningless anyway as the version number is no longer valid.
If you wish to change the version number yourself, use a registry editor and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3RDVERSION and change the MSYSTEM value to whatever you like.
If I have the wrong end of the stick, I apologise otherwise I hope this helps.
huh!? are u mad at me ??? anyway, i just wanna tell that you're the great! thanks very much....
I'm not mad at you, just woke up from a night shift....bloody binmen.
Was just trying to figure out which rom was reverting and so on. Hope it was of use to you anyway.
Once again, sorry.
HELP!
I Can't Upgrade the ROM.
step 1 is OK (radio)
Step 2 is OK (EXT):
Step 3 to 8 % PC show : Error 112: CE ROM UPDATE ERROR
WHY???
i run the MaUpgradeUt_noID.exe second Time , but frist Run MaUpgradeUt_noID.exe Need to STOP(use TASK Manager)??
PLEASE HELP ME
thanks for the update ..it's upgrading at the moment
thanks for the update, the only problem i'm having is that even though i've got the in call volume as low as it will go it is still too loud to be comfortable which is a big change from the previous rom. Also when using in the car on handsfree the other person can hear his voice echoing as they speak. Any ideas????
Successfully upgraded my XDAIIi.....
I'm now with the latest ROM from O2 UK (1.11.169 WWE) and the Radio version 1.04.00
Hi, I'm from Malaysia and will this rom be able to use on my device?
I'm using XDA IIi and device id is PH10C.
I'm affraid there will be a problem for my local operator "Maxis".
@ ramnkc
To be honest I can't see a problem with this ROM working with your current operator. I'm pretty sure that others from your neck of the woods are using the ROM with no problems. The biggest problem you would have is that it wouldn't load all your GPRS, WAP, MMS, etc settings as it is a UK rom.
Make sure you can get hold of these settings off your current provider before you perform the upgrade. Or as an alternative, extract your current ROM and reload it back onto your phone using SD card.
thanks for the reply !
Well i guess i gonna wait for the official release coz so far i'm happy with it. Apart of the constant SD Card data missing after playback mid, mp3 or what ever music files from SD Card.
And i finally found out that it cause by SBP pocketplus which had an option to close all application once you tab on X. Once i turn that option off in pocket plus so far problem free.
Guys/gals out there have this problem ?
ykyloveu - Does this mean you have BB Connect as well? The only modified rom from here I can download is based on cer .112 The new rom for o2 with BBConnect is ver .169