Database Users

O2 Xda II Configuration for Globe Telecom Philippines

Connections Configuration:
Under Start > Settings > Connections > Connections > Advanced > Select Network, Create 3 new entries:
Globe WAP Configuration:
1. Connection Name: myGlobe WAP
2. Modem: Cellular Line (GPRS)
3. Access Point Name: www.globe.com.ph
4. No Username, Password and Domain
5. Use server-assigned IP address
6. Use software compression
7. Use IP header compression
8. Proxy Settings: Advanced > WAP Server: 203.177.42.214 / Port: 9201
Globe Internet Configuration:
1. Connection Name: myGlobe Internet
2. Modem: Cellular Line (GPRS)
3. Access Point Name: internet.globe.com.ph
4. No Username, Password and Domain
5. Use server-assigned IP address
6. Use software compression
7. Use IP header compression
8. No Proxies
Globe MMS Configuration:
1. Connection Name: myGlobe MMS
2. Modem: Cellular Line (GPRS)
3. Access Point Name: mms.globe.com.ph
4. No Username, Password and Domain
5. Use server-assigned IP address
6. Use software compression
7. Use IP header compression
8. No Proxies
MMS Composer Configuration:
Under MMS Compser > Tools > Options > "Servers" Tab:
Create New Server:
1. Server Name: myGlobe MMS
2. Gateway: 192.40.100.20
3. Server Address: http://192.40.100.22:10021/mmsc
Under MMS Compser > Tools > Options > "Preferences" Tab:
1. Connect Via: myGlobe MMS
2. Connect to Server: myGlobe MMS
3. The other settings you can leave default or change them to what suites you.
Notes:
1. WAP addresses should be preceeded by wsp:// instead of http://
2. You have to switch connections between the "myGlobe WAP" and the "myGlobe Internet" connections depending on the type of access you wish to use. (i.e. wsp://.... uses "myGlobe WAP", and http:// uses "myGlobe Internet")
3. Switching to "myGlobe MMS" is not required to send and retrieve MMS messages.
All these settings work for me, hope it dows for you too.

Thanks for your post!
Galing!

That's Great, @ least I know the configuration even I'm not there. 8)

Globe Philippines MMS settings for PPC 2003
ZeroExtreme seems to know a lot about this.
I upgraded my XDA II to the new Asian Edition that was posted here and the MMS configuration is different from the old version. The connection is still the same but the MMS composer software is different and I cannot get it to work.
I guessed that the port should 10021 but I cannot get it to work.
Has anyone experienced getting MMS to work on the new Asian Edition software for Globe Telecom Philippines?

Re: Globe Philippines MMS settings for PPC 2003
Galadai said:
ZeroExtreme seems to know a lot about this.
I upgraded my XDA II to the new Asian Edition that was posted here and the MMS configuration is different from the old version. The connection is still the same but the MMS composer software is different and I cannot get it to work.
I guessed that the port should 10021 but I cannot get it to work.
Has anyone experienced getting MMS to work on the new Asian Edition software for Globe Telecom Philippines?
Click to expand...
Click to collapse
Use the AutoConfig program in the Xda II, it should set all your connections (Internet, GPRS/WAP and MMS)

Globe Philippines MMS settings for PPC 2003
I tried that when I first upgraded and it severely corrupted the MMS options. The servers had no names and couldn'tbe editted either. It didn't work either so I did a reload of 2003 and told it not to autoconfigure.
ThE auto configure I'd tried to use was at the option that comes up after a hard reset. Is there another way that works?
Thanks...

What ROM version are you using? SE or the 1.72 from UK that was customized for Asia?

Globe Philippines MMS settings for PPC 2003
To tell you the truth, I'm not sure which flavour's what now, had tried various updates and this one seems stable..
Details are:
ROM Version: 2.06.00WWE
ROM Date: 06/14/04
Radio Version: 1.18
Protocol Version: 1337.38
ExtROM Version: 2.06.100a
Does that tell you anything?

Globe Philippines MMS settings for PPC 2003
Hi ZeroXtreme, it was your version, Customized WM2003SE ROM - Asian Edition, that you posted on 5th Dec....
Does that help?

Re: Globe Philippines MMS settings for PPC 2003
Galadai said:
Hi ZeroXtreme, it was your version, Customized WM2003SE ROM - Asian Edition, that you posted on 5th Dec....
Does that help?
Click to expand...
Click to collapse
I immediately posted version 2 of the customized ROM, since the extended ROM of the first one is based on the non-SE OS.
Look for the version 2 of the customized extended ROM for SE, the autoconfig here correctly configures the MMS with the new MMS messaging application.

CUstomised Extended Rom
Thnx Zero, can I just load the extended ROM or do I need to do a complete reload of everything?

Globe Telecom Philippines - MMS Settings
I ended up doing a complete reinstall and MMS is working fine now. Thanks ZeroX
For Anyobody's reference the following is the configuration for the MMS settings for Globe Telecom in the MMS Composer:
Server name: Globe Telecom
Gateway: 192.40.100.20
Port number: 9201
Server address: http://192.40.100.22:10021/mmsc

could you tell me how to set gprs for pda2k globe telecom

Help with O2 Xda II Configuration for Globe Telecom Philippines
Good day.
I have followed the instrutions given on the forum about configuring my O2 XDA II's MMS and GPRS for globe but until now i have not been able to access the wap site.
I have gotten my phone from a friend who has not been using it full potential. but when i tried to use its iexplorer it could not connect to the wap site. I have gone to the globe offices here in the south but still they are unable to help me get connected.
please help me. would i still need to reformat my pocket pc and reinstall a new os for this to work?

GPRS connection can't used (XDA Neo, WM6, G4)

Hi everybody
I flashed on my new XDA Neo (it's a G4) Smart1's clear WM6 ROM and it is very cool! But I can't use a GPRS connection which I saved!
Both networks changed to "My Work Network"
Connection name: O2 WAP-Flat (Cellular Line (GPRS))
Access point name: wap.viaginterkom.de
user name: [email protected]
password: I don't write it here
Proxy server is:
HTTP: 195.182.114.52:8080
WAP: 195.182.114.52:9201
Secure WAP: 195.182.114.52:9203
I looked a few minutes ago at the connection settings and the user name and password were deleted!!! Is this a problem of these WM6 ROM or does WM6 not allow such connections?
Thanks in advance

did you ever solve this - i have the same issue with the newer ROMs here.

hp 6515 gprs/mms - autoconfig??

hi all, i am new on this forum,
i have this phone(6515) few months, but still cannot get MMS to work. all the time i am looking around, read forums, try at least 50 diferent settings and here found some interesting things...
so, is it possible if somebody help me with creating autoconfig script (i found only for wm6 and without setting for my mobile operator).
i have all updates and wm 2003 installed.
thank you.
on hp site found that mms doesnt work becouse they are not allowed,
so how can i enable it?

Well, if MMS are not allowed by your network then you can't.
It is not a matter of device or OS, if your operator does not give you this service you can not enable it.
As for creating a configuration cab (for quick installation after hard reset?), it would be easier for people to help you if you post your operator settings.

hi,
i allready solve this, using some file explorer which can show hidden files, edit registry, manualy run some cab files and thats it.
thank you
thank you for answer,
disallowed mms i mean they are probably blocked in settings in rom (i got this information on hp site when checked version description)
otherwise this sim working ok with mms in other phones
here are settings for my provider:
GPRS:
Mobitel GPRS:
Access point name: internet
User name: mobitel
Password: internet
(WAP: Server: 213.229.249.40, Port: 9201)
(Secure WAP: Server: 213.229.249.40, Port: 9203)
MMS:
Mobitel MMS:
Access point name: mms.mobitel.si
User name: mobitel
Password: internet
Server name: Mobitel MMS Center
Gateway: 213.229.249.40
Port number: 9201
Server address: http://mms.mobitel.si/servlets/mms

[Q] Fido HSDPA WM 6.5 Setting

Hi team I am newbie. I got LG IQ (EXPO) Telus locked today & got it unlocked. Now I can't get into internet through Internet Explorer. If I try to go to wwwDOTyahooDOTcom I get Forbiden message. I try Opera it worked fine. Also the weather update does't work. It shows me error invalid zip code. When I try to use WiFi everything worked fine. So I am doing something wrong here
I have Entered
Enter a name for the connection - Fido Internet
Select a modem - Cellular Line(GPRS,3G,HSDPA)
Access point name - internet.fido.ca
User name - fido
Password - fido
Domain:* - EMPTY
I try but nothing worked
Anybody with same problem ???

do you have proxy disabled?

Thanks but where is the proxy setting????
Where is the proxy setting????
Please walk me through
Thanks

xdarulz said:
Where is the proxy setting????
Please walk me through
Thanks
Click to expand...
Click to collapse
go to start>settings>connections>manage existing connections>then go to the right there is a tab that says proxy settings make sure you have this network connects to the internet. also in the connections menu under advanced hit the select networks button now select the correct network that you would like to automatically connect to the internet. and I found some settings for you
Account 1:
Name: FidoWAP
APN - wap.fido.ca
User: fido
password: fido
Account 2:
Name: FidoINT
APN: internet.fido.ca
user: fido
password: fido
then, to set up WAP, create a Wap profile with the following:
Name: Fido
Connect using: FidoWAP
Gateway: 205.151.11.11
user: fido
password: fido
OR
homepage: »wap.fido.ca
session mode: permanent
connection security: off
data bearer: GPRS
GPRS connection: when needed
GPRS access point: wap.fido.ca
IP address: 205.151.011.011
authentication type: normal
login type: automatic
user:fido
password:fido

Auto config
You should config network to correct one. Use the software above.

HTC maple Connection setup

Hey guys
I use Wind mobile and the 3vo rom found in this forum.
My only problem is that the connection setup included in the rom is very old and it doesn't have wind mobile in its database.I went around looking for a newer version to install and I found this in another forum.
http://forum.xda-developers.com/showthread.php?p=12807575#post12807575
"HTC Connection Setup PPC v3.1.2016.2829.cab"
However,upon installing,I don't know how to access the new program.When I select the connection setup,I get the following message:
"Can't find 'Connectionsetup' (or one of its components).Make sure the path and filename are correct and that all the required libraries are available."
Anyone with solutions to this?
THanks.

You can set this up manually through the settings->connections->GPRS
The settings are there:
http://www.howardforums.com/showthread.php/1691746-Wind-Internet-Settings

Problem solved.
Here is the solution:
I called up Wind and they weren't much help.
And yes I have gone through the link jeromecornet posted above before.
Anyways,I installed Wind's rom just to see the specific setting for
the maple.
I had to use do the instructions posted on this page below to accessed them
as they were deny.
http://stevenharman.net/blog/archive/2008/10/03/windows-mobile-internet-connection-sharing-hack.aspx
I Used Total Commander to access the Registry.
Here are the settings for the MMS to work correctly on the HTC Maple
for Wind.This is for anyone else in the same place with a wind mobile
HTC Maple.
Start - Settings - MMS Settings
Menu - MMSC settings
Add this in
NAME: WIND MMS
MMSC URL: http://mms.Windmobile.ca
WAP GATEWAY: 74.115.197.70
PORT: 8080
CONNECT VIA: WAP Network
MAX SEND SIZE: 300k
WAP VERSION: wap 2.0
Than go to Connections in Settings than GPRS and add the following
two:
1)
Name:Wind Internet
Connects to: The Internet
Access Point: internet.windmobile.ca
leave the rest BLANK.
2)
Name:Wind MMS
Connects to: WAP Network
Access Point: mms.windmobile.ca
leave the rest BLANK.
This is settings straight from the Windmobile 6.5 rom.
Happy image texting!