I have just encrypted password for fins ezwap archives, which are located here http://www.chryseis.be/~dhe/ In this thread http://www.xda-developers.com/forum/viewtopic.php?t=685&highlight=ezwap25xda many of people want to know it, so the password is "ozone2K3" case sensitive. I try czech and english version, but i hope, that this password will work on every archive. Bye Max
This password did NOT work with the UK version!!!
the password worked for me on the file named EzWAP25UK.zip 2.1mb
i have not installed on my xda yet but the software ran on my pc just as it should but i cancled as my xda was not with me
Worked for me on the UK file.
When I try to install, it insist on replacing a newer version of wapdrv.dll with its own. If you say "no" it cancels the install.
Carlos said:
Worked for me on the UK file.
When I try to install, it insist on replacing a newer version of wapdrv.dll with its own. If you say "no" it cancels the install.
Click to expand...
Click to collapse
when it replaces the wapdrv.dll, it disables the PIE from doing WAP
anyone knows is this EZWAP 2.5 the full registered version or just the trial version only??
I have just downloaded ezwap25xda, that didnt require any password, the uk version accepted the password as described above.
I can't seem to send MMS ("failed to send"). I'm using the WAP APN (wap.voicestream.com) and entered the MMS server's address as I found it elsewhere (216.155.174.84/servlets/mms). Any ideas?
WAP works, though I have to wonder, what good is it? I had to try hard to find a WAP site. Sounds fine for an old cell phone, but why bother on a PDA?
Related
I installed the XDA developers ROM, and everything is ok except the internet connection through GPRS. I wrote he APN that my provider gave me, (Orange-Isral) is "internet.orange.net.il". No other settings. I can connect to the internet and send and receive emails, but I can't browse in internet explorer neither in the ftxpbrowser. Before the upgrade it worked fine. Also before the upgrade, every time I click on an internet link the QTEK eould connect to the ne. Now it doesn't. Any idea what am I doing wrong? Someone had experience similar probems? Thanks.
Connection settings didn't worked for me too after I flashed the original developers ROM. Even worse after the second and the third re-flashing - autoconfig just wouldn't work at all.
I "fixed" the problem simply removing "operators" section from the mkrom shell script and configured everithing manually then. Of course you'll need to build the ROM yourself. But it's also a great fun.
One problem with the current version of mkrom, is that it may put the operator rom after 81bc0000 if you have too many files in 'files1' ( and then autoconfig.exe cannot find it anymore ).
the lost connection settings probably have something to do with 'defaultconfig.xml' ( which I currently ignore ). I have to fix our own welcome.exe to process that too.
expect an update with many problems fixed soon.
If I reflash the original qyek version or the 4.17 UK O2, would zi be able to connect again?
I flashed the devolopers rom but cant browse the internet...My email and msn are fine just no web access i am on vodafone and i configure my own settings.
Have just used adaptrom to flash back to 3-17-03 awaiting any updates on devolepers rom, It was very good to say the least just i need mobile ie.
I will have a play at the weekend.
Same here. I flashed the ROM on a US T-Mobile unit, and can't surf with ie. Thunderhawk works, but ie is crippled. That defaultconfig.xml file needs to be executed. Is ther any way to execute it manually :?
Thanks.
Have you execute autoconfig.xml file??
I have the same problem, I have put my autoconfig.xml file on the ROM but don't update nothing....
have any one try it....to set connection, favorites on Internet Explorer etc...
I have found defaultconfig.xml file on my Qtek 2020 on \Windows
directory but If I change file for example to add favorites to Favorites Explorer this don't appends ..
anyone have the solution for this problem???
please...
TouchFlo 2D weather patch:
http://forum.xda-developers.com/showpost.php?p=2638566&postcount=50
Thanks to idsk for the great patches
====================================================================
A member (idsk) from the forums have created a patched HTCHome.dll that works with proxy connections. He has created 2 versions of the patched full versions of the HTC Home installer. His cab's can be found in his main post. I have created 2 cabs that would patch your already cooked or installed HTC Home. My cab install files will not change your customized Home or settings. Proxy setting is set to auto. If you want to force your proxy setting like I have, change your registry settings.
Note: When you force your proxy settings, updating through Wi-Fi or while sync'ed will not work.
Registry settings:
[HKLM\SOFTWARE\HTC\HTCHome\Weather\Settings]
"ProxyType"
0 = auto proxy config (system config*)
1 = direct to net (without proxy, default)
3 = via named proxy
"Proxy"
named proxy, IPORT (only used if "ProxyType"=3)
"User-Agent"
user-agent of the request
(the default user-agent is sent if leaved blank)
"Url"
url of the weather server (must begin with "http:" and without parameters. the parameters will be appent to it after a '?')
(the default url is used if leaved blank)
*I noticed that the autoproxy option forces the program to take pie proxy config, so pie should be at least launched once.
Forced proxy connection for T-Mobile USA using (T-Mobile Web or T-Zones)
Set the following:
[HKLM\SOFTWARE\HTC\HTCHome\Weather\Settings]
ProxyType: 3
Proxy: 216.155.165.50:8080
Be sure to backup your HTCHome.dll! If you already know which version you have then install the proper version you have. If not try the other patched cab. If either cab does not work, restore your HTCHome.dll
I take no credit for creating this proxy patch to work. All credits should goto idsk for his hard work.
His main thread is is here:
http://forum.xda-developers.com/showthread.php?t=363417
works fine
just tried the v1.5 on my kaiser and works sweetly
thanks!
UPDATE:
I'm not sure what I did wrong, but it stopped working.... it also doesn't event let me change the city...
RE-UPDATE:
Now I know what I did wrong: I had changed the database to "custom" using HTC Home Customizer... my bad
hypest
I've been using this patch since it was released, and it's been working flawlessly. Thanks goes to idsk for the original version and phouki for enabling this feature on all HTChome versions.
The next challenge is to enable other programs to work with the WAP proxies out there, such as Live messenger, FRING, and all other programs.
After a talk with idsk himself, he said that theoretically it can be done.
For htchome, he edited the htchome.dll in a hex editor, and searched the string "wininet.dll" and replaced it with "idskpxy.dll". Then he resigned the dll, and put idskpxy.dll in the same folder.
He actually started to work on Fring, and found it needs 12 functions to be re-routed to his hacked dll, but he hasn't been visiting the forum lately.
Personally I have no experience in hex-editing, I tried checking some exe and dll files and hex editing it, but with no success.
The question is : is there any developer or programmer out there who can check some popular programs and try to re-route the files to idsk's hacked dll file?
Thanks
Great great great
Thanks a lot
Working fine on HTC Kaiser Dutty's WM6
Any help devs and programmers???
phouki said:
A member (idsk) from the forums have created a patched HTCHome.dll that works with proxy connections. He has created 2 versions of the patched full versions of the HTC Home installer. His cab's can be found in his main post. I have created 2 cabs that would patch your already cooked or installed HTC Home. My cab install files will not change your customized Home or settings. Proxy setting is set to auto. If you want to force your proxy setting like I have, change your registry settings.
Note: When you force your proxy settings, updating through Wi-Fi or while sync'ed will not work.
Registry settings:
[HKLM\SOFTWARE\HTC\HTCHome\Weather\Settings]
"ProxyType"
0 = auto proxy config (system config*)
1 = direct to net (without proxy, default)
3 = via named proxy
"Proxy"
named proxy, IPORT (only used if "ProxyType"=3)
"User-Agent"
user-agent of the request
(the default user-agent is sent if leaved blank)
"Url"
url of the weather server (must begin with "http:" and without parameters. the parameters will be appent to it after a '?')
(the default url is used if leaved blank)
*I noticed that the autoproxy option forces the program to take pie proxy config, so pie should be at least launched once.
Forced proxy connection for T-Mobile USA using (T-Mobile Web or T-Zones)
Set the following:
[HKLM\SOFTWARE\HTC\HTCHome\Weather\Settings]
ProxyType: 3
Proxy: 216.155.165.50:8080
Be sure to backup your HTCHome.dll! If you already know which version you have then install the proper version you have. If not try the other patched cab. If either cab does not work, restore your HTCHome.dll
I take no credit for creating this proxy patch to work. All credits should goto idsk for his hard work.
His main thread is is here:
http://forum.xda-developers.com/showthread.php?t=363417
Click to expand...
Click to collapse
Now after installing the Cab, do I have to go into the registry and change the settings or just leave it be. Because i've installed and try downloading and it wont let me. I did open IE and minimize it but still isnt downloading. However, Accuweather does connect to The proxy internet when attempting to download. Please help and thank you.
Creekboyz22 said:
Now after installing the Cab, do I have to go into the registry and change the settings or just leave it be. Because i've installed and try downloading and it wont let me. I did open IE and minimize it but still isnt downloading. However, Accuweather does connect to The proxy internet when attempting to download. Please help and thank you.
Click to expand...
Click to collapse
Do you have proxy settings in your internet connections? You can try the forced proxy reg settings which is on the bottom of post #1.
HTC Weather
thanks! v2.1 worked a treat on my XDA Orbit 2
It's not letting me install either .cabs - says install was unsucessful...did I do something wrong? Im using the OEM ROM.
Thanks!
thanks, this is really great! 1.5 worked on my wizard 6.1.
Odd. Got them to install..and they BOTH jacked up my plug in...had to uninstall and reinstall HTC Home. Also...I tried forcing the proxy. Setting it to "0" still no go? What am I doing wrong?
HTC Cruise.
Does this patch work with htc cruise ?? If yes which one should I try ?
VooDoo1 said:
Odd. Got them to install..and they BOTH jacked up my plug in...had to uninstall and reinstall HTC Home. Also...I tried forcing the proxy and could not find in the string where it said anything about Proxy setting. What am I doing wrong?
Click to expand...
Click to collapse
Anyone? I'd really like to get this to work.
VooDoo1 said:
Anyone? I'd really like to get this to work.
Click to expand...
Click to collapse
If the patch does not work for you then try the full installer cab here:
http://forum.xda-developers.com/showthread.php?p=1865066
samxda said:
thanks, this is really great! 1.5 worked on my wizard 6.1.
Click to expand...
Click to collapse
unfortunately it also broke people and launcher tab in a way that you can't add things to the unused spots.
i'd still take weather sync over the above any day but if anybody knows how to fix those please let me know.
"User-Agent"
user-agent of the request
(the default user-agent is sent if leaved blank)
"Url"
url of the weather server (must begin with "http:" and without parameters. the parameters will be appent to it after a '?')
(the default url is used if leaved blank)
in response to the above lines, do you leave the
"User-Agent"
blank or do you need to enter something for it in the registry? leaving it blank hasnt worked with or without the forced proxy for my wing through tmobiles $5.99 plan
"Url"
same for this, do I need to enter Accuweather.com or leave it blank?
any help would be appreciated as I have tried and tried every setting but with no success yet.
randomly picked HTC Home Proxy Patch v2.1.cab with my ASERG.12.WM6.1E.WWE t-mo wing works perfectly!!!
Awesome fix, works great on my wing (open touch 3). Next I'll try it on my Cingular 3125 (Erofich's 6.1 standard).
It's working man.
It's working man.
I'd installed 'HTC Home Proxy Patch v2.1.cab' & after soft reset I changed the proxy values with that of my operator in -
[HKLM\SOFTWARE\HTC\HTCHome\Weather\Settings]
ProxyType: 3
Proxy: x.x.x.x:8080
Hi,
Thanks that's works well with version HTC Home 1.5 !!!!
But I have trouble with the 2.1 ! It's block my polaris when I
want to power down my device. Test full cab or just pach
same way.
- Long push on power button
- Poweroff message
- Confirm that's I want to power down
- The device put off the GSM
- the screen is powered off automaticly
But nothing happend after, the device is waiting for something !!!!!!!!!
If a put the power button , the device steel waiting and does power
off !
If I use the 1.5 works well (but is 6 tab and can't be customized)
Does anyone have this trouble with 2.1 version ?
I don't know what the problem is, or if I am missing something, but I can't get online with my cruise.
I was using the latest radio, and a custom rom. Tried a hard reset, different radio too, still no luck.
I thought all i needed was..
internet.fido.ca
fido/fido
and an ip address which I cant remember, but none the less, nothing is working. (actually, don't know if that's the DNS, for the server address i enter in the advanced settings)
Flashed to default WWE rom, pyt same settings in, this time it pops up with trying to connect, but in the end gives me same message..
"dialed internet.fido.ca. Cannont connect for an unknown reason" blah blah blah..
Another fellow has an htc tytn and used the same settings, on a custom rom that was made by the SAME GUY that made the custom rom i am using for my cruise.. which is pretty weird.
Anything else I can do for trouble shooting? Do i have to wait awhile for it to kick in? or shoudl it just work after a soft reset?
Hi i have downloaded the rogers cab in this forum and modify the internet.rogers.ca to internet.fido.ca and change the user/password and it work fine, 5 cent for one KB
Hmm ok. I am on the $30/6gig plan.
I went through the flashing okay. And I was even able to unlock and do everything else including getting a code from MS. But when I get to the step that says run connection set up, it tells me that my carrier is not in the database and then tells me to manually set up my APN.
I know I did everything else okay, but I know I can't edit my HD2 registry settings because of this. And my market and xbox features don't work because of this issue.Please, if anyone has had this experience, or knows why I'm getting a "carrier not in database" when I run HTC Connection set-up. I would greatly appreciate it. I hope I'm not the only one having this issue.
Same problem here. Whats your carrier?
I already tried to add the keys manually using a registry editor. However it didn't work and the phone has locked itself again. Now I cannot even unlock it anymore using chevron (it says no connection) so I cannot launch any registry editor or try something else. Probably I have to flush it again. However what I still really need is a solution to this problem with the carrier.
I have solved the problem. My carrier is a small carrier from austria (bob). It seems that the HTC tool simply doesn't have any data for this carrier (the tool in win mobile 6.5 has known bob...). I used another sim from another austrian carrier (a1), whith this i was able to run the tool and add the registry data!
The Connection Setup didn't work for me too. Just ask your provider for the APN (Access Point Name) the Username and the Password and type it in Settings-network- add APN. Thats all.
For A1 /bob its:
APN: A1.net
User: [email protected]
Password: ppp
Yes, but entering the APN has not been the problem. I wanted to use the Connection Setup to add registry keys according to the WP7 guide. However, I already have solved this by using another sim of another carrier.
@oscar2010 did this work for u too?
Hey forum,
I know a lot of you would of heard stuff like this before, but after flashing Darky's ROM I'm having issues with APN. I have tried multiple times to access mobile Internet, and I noticed I have no access points. I have tried to create access points as I have been given the info on how to access Virgin's internet, but each time I go to save it, nothing saves, it stays blank. Anyone have any ideas?
Yeah it's a problem with JVO/JVH itself. I also had that problem. The trick is to not touch the MNC field when entering the apn. After that it's all sweet. So even if MNC is shown as 029 do not go in there and change it.
Hope that helps
try restoring to default apn then proly nothing will happen but you will be able to save new once after... worked for me...
solve
u can solve this problem when u flash the dark core 2.6 kernel
it work perfect with me
(sorry for my english)
I have the same problem.
I'm not running Darky, I have stock JVP, with CF_root
I did restore to default and I never changed MNC
Name, APN, APN Type are the only 3 fields i modified, and it still will not save
Any other ideas?
Can you send mms?
Sent from my GT-I9000 using XDA App
No, I also need an APN for that.
Got an answer that seems to make sense, haven't had the chance to test it as I'm in the office for another 4/5 hours.
Check here:
http://forum.xda-developers.com/showthread.php?t=1117062&page=43 (bottom half of the page)
PLEASE give thanks to electrotune1200
Apparently re-flashing new firmware with an old CSC meant for your region should do the trick. Follow the link for more info.
If anybody is still interested, I did as advised in the link I provided above and it worked. Basically I downloaded an older firmware which had the CSC for my region of the world, and flashed the CSC alone to my phone through Odin, no pit no repartition.
It worked perfectly fine and I didn't lose any of my data or apps.
Good luck.
NeoXTC said:
Yeah it's a problem with JVO/JVH itself. I also had that problem. The trick is to not touch the MNC field when entering the apn. After that it's all sweet. So even if MNC is shown as 029 do not go in there and change it.
Hope that helps
Click to expand...
Click to collapse
@NeoXTC thanks so much! I can now access Internet! And good luck to all you other guys who are having the same issue.