Related
Hey Guys,
My friend gave me a pocket pc with phone edition. When I tried to insert my sim card it asked me to the unlock code. My friend used this mobile for T-Mobile sim card in US.
Here is the ROM Versino: 4.01.16 ENG
ROM Date: 02/04/04
Radio Version: 6.25.02
Protocol Version: 324e4
After typing my PIN code it asks me to unlok the sim.
What can I do to resolve this problem
Thanks,
bm_t
Try the XDA unlock tool. You can find it on the website.
I have unlocked tmobile using that tool. However if it gives you problems unlocking.... I would suggest installing the xda rom and then try.
I am going to unlock a new Tmobile on tuesday. If this does not work you can get in touch with me on any chat and I will walk you through the process.
lemme know if you need anymore help.
Cheers!
Diki :lol:
Thanks Diki for your reply.
I have tried XDA Unlock and XDA2Unlock but failed.
When I tried XDA2Unlock it reports some error like COM2 0X..... (Hex #)
You have seen my ROM version and Radio version. How do i install new xda rom .
I only have the USB cable. Do I need a serial cable?
thanks
As much as i know, it will not work for you to unlock your device.
xda2unlock is only for the second Version of XDA (MDA II, MDA II,...), so you have to use the xdaunlock tool.
there are several postingsa, that unlocking will fail with your radioversion.
Maybe they have changed the code in this version.
There is a guy (cgigate) that promise he is able to repair and unlock all devices, but personal i don't believe this.
i believe changing ROM will not change anything. But you can try it. Look for the XDA deelopsers special ROM 1.2 or use the 3.17.03 ROM and the unlock tool.
But flashing a device could be dangerous.
Changing the radioversion is also possible, but the risc to end ata paperweight is very high...
Stefan
Hello LumpiStefan,
Where do I found 3.17.03 ROM. I have tried in your site(Romkitchen) but I couldn't able to download.
http://lumpistefan.dynsdns.org
After selecting the ROM and some additional softwares, I clicked the 'Build Rom Now' Button but nothing comes.
Can you help me with this?
thanks
bm_t
bm_t said:
Where do I found 3.17.03 ROM. I have tried in your site(Romkitchen) but I couldn't able to download.
http://lumpistefan.dynsdns.org
After selecting the ROM and some additional softwares, I clicked the 'Build Rom Now' Button but nothing comes.
Click to expand...
Click to collapse
Cooking process works well for me.
Maybe you have to wait a few minutes more.
Cooking process can be up until 5 minutes.....
Otherwise try again the Build Rom now button....
HTH
Stefan
Hello LumpiStefan,
I have tried serveral times but I couldn't able to download the ROM.
Do I have to register or download some other application to download your ROM.
Here is what I did to download the ROM
After Entering ur site LumpiStefan, http://lumpistefan.dynsdns.org
I clicked PPC 2002 and select 3.17.03 with XDA developers (Default ).
and clicked 'Build Rom Now' button.
When I clicked 'Build Rom Now' button, the only thing that changes is the graphs (right hand side of the page). I have tried many times but only the graphs changes.
Did I miss something (some procedures or .....)
thank you for ur time
After clicking cook rom you should have the option to specify where to download it.
Hello,
I have 128 kbps line but couldn't able to download the rom for the site.
http://lumpistefan.dyndns.org/
It doesn't respond the site except changing the cpu ... graphs
Is there any other site to download 3.17.03 Rom for XDA-I.
thanks
bm_t said:
I have 128 kbps line but couldn't able to download the rom for the site.
http://lumpistefan.dyndns.org/
It doesn't respond the site except changing the cpu ... graphs
Is there any other site to download 3.17.03 Rom for XDA-I.
Click to expand...
Click to collapse
You can try http://xda.weblink.net or use http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe to download the xda developers ROM based on 3.17.03 including the unlock tool....
I think you're the first guy that has problem to download a rom from the kitchen.
What for browser are you using? Have you ever tried another ROM?
HTH
Stefan
Hi LumpiStefan,
Thanks for ur reply.
I have checked both sites (i.e http://lumpistefan.dyndns.org/ and http://xda.weblink.net)
I have tried also another rom but the same problme. I have tried to download the rom from Linux and win XP pc.
I have aslo downloaded http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
but when I executed this file from my win XP machine ( I have connected my XDA through USB cable and installed ActiveSync 3.7.1) it reports error (something like Unable to find the XDA Please connect Serial/USB cable)
I'm really really stuck with this phone
thanks
it seems that you don't followed the correct procedure.
This link it's a wizard and could help you: http://wiki.xda-developers.com/wiki/UnlockWiz
Hello Folks,
I have seen a post in form.xda-develpers.com that this file http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
will not work because my phone (i.e PC2003) (the adaptROM is not compatible with PC2003)
He said the only option to Unlock the SIM is only using this xdarit.exe application. Since my SD is 8 MB, I can't load the ROM with this space.
As far as I have seen the situation, my only option is getting the serial cable.
Do you have any suggestions?
Thanks
bm_t said:
As far as I have seen the situation, my only option is getting the serial cable.Thanks
Click to expand...
Click to collapse
Get the serial cable.
SIM Lock
Hi,
Every time I run "XDA-developers-SER-v12.exe" I get a message, error getting data, and then the program close.
plz advise. thanks
'error getting data'
I had the same error. I read somewhere on one of these posts that
there was some capatibility between Programme A.exe and Activesync 3.7.1.
Apparently you could downgrade your activesync version or use XDATools to push the nk.nbf file down to an SD card and flash from there. Use winzip or something else to extract all the files in the SER installation exec. In the English folder you'll find the NBF file to use.
In XDATools put this as the Source, target is the SD card in the device. Go to bootloader utilities (power+soft reset and maybe press contacts) and depending on your bootloader version it may detect you have a flash image on your SD card. Follow the instructions on the pda to flash the rom.
Hi rhodwyn,
Thank you for your support, but still I cannot downgrade my "BootLoader" to "5.15" with every boot I'm geeting "5.22" even after loading the spocial edition ROM.
Also, I cannot find (XDArit & Wallaby bootloader version 5.15 files) in the neet.
Please advice.
Thanks.
Hi ALL,
I did unlock (SIM LOCK) my phon.
Thanks you all for help & support.
Dear All,
Is it possible to unlock the SIM on universal
Is tit possible to change the language on the phone from french to English
Can you please guide me on how to do the above as I dont speak french
Is it possible to save the current settings on the phone if the above fails
as the operator sayzs that the warrantz on the phone is void if the language is changed or the SIM is unlocked
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
I can help you change language from french to english.
Doesn't your Universal have a place where you can download the french ROM? If not, it is still possible to backup the french ROM. A little complicated, but i'm sure i can walk you thru the process.
Regarding the unlocking, i don't think it is possible at the moments. The geniuses are working on it but as of now, you can have it unlocked thru your provider. Just pay the fee (which i think is around 20-30€)
Dear Jorgee,
I would appreciatte if you can walk me htrough the language change, I have tried the provider which is orange switherland, that the lock is definite
A Bellah
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Dear Jorge
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
and I want to change into english
Which of the following ROM's would you like?
O2
QTEK
IMATE
Take note, flashing the ROM/Changing the language doesnt get rid of the SIM Lock
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
abellah30 said:
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
Click to expand...
Click to collapse
I guess if you want the fastest or newest? The fastest in MY opinion is the QTEK because it has few customizations. The newest I believe is O2 ROM
Regarding Phone configurations of Orange, the configurations are set thru a .CAB file which is stored in Extended ROM. All you have to do before changing ROM is to backup the extended ROM, then Flash the device to english, then run the CAB file that has the Orange customizations.
If you can give me a list of the files in your Extended ROM, i'll do my best to explain what each file does
Dear Jorge,
I guess I will use the same as youy which I thinkl would be the qtek.
Ok where do i get the programme to back upo the extended rom
Thanks
Backing up extended rom, have to install Total Commander. Then in total commander, type \EXTENDED_ROM which will show you the contents of the extended ROM. Just copy to the SD card and save in your computer, that's how you backup extended ROM
For backing up the OS ROM, refer to this thread as it was BUZZ that helped me find out what to do.
Its : http://www.buzzdev.net/index.php?op...=view&id=8573&catid=33&limit=15&limitstart=15
Just download the file at the bottom of this page (page 2) then continue on to page 3 and 4 which explains how to do it. Just PM me regarding where you are already and I will walk you thru the rest as I have already done the procedure
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
abellah30 said:
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
Click to expand...
Click to collapse
What command did you enter that caused you to get an error message?
go here ftp://xda:xdaftp.xda-developers.com/Uploads/Universal/Shipped ROMs and download UNI_Qtek_WWE_11364_151_10300_Ship.exe for the English ROM.
are you sure you don't want to backup your ROM first?
Just drop me a message if you get lost.
dos command
i want to back it up first but I am getting the folowing error on the dos command
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\> pdocread 0x0 0x3FA0000 QTEK.RAW
'pdocread' is not recognized as an internal or external command,
operable program or batch file.
Did you install EnableRapi on the PPC first before doing this?
THen you have to disable the USB connect option of ActiveSync,
Then enter Bootloader mode on yor universal,
then connect it to the computer,
then run the pdocread
is this what you did?
no I followed the articel your refered me to, I ran the enable rapi, then connected to the usb and then ran the programme.
I also tryed to download the qtek system but the link you gave me does not let me acess the site
you have to put xda:xda in the link as this is the username and password. Or use an ftp program to access the site, this might be easier
I put it in the bootloader state and still the same message
I put it in the bootloader state and still the same message, but the message on the article you refered me toi says not to do so, I have tried both methods and cantr seem to be able to get it done
Sorry, but i don't know what to say. Are you using the original cable?
Re: [AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1 (Mar07 RE-UP) | PIE QS-TOGGLE, Bat %
Jorgee said:
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Click to expand...
Click to collapse
Did you do a clean install and latest gapps?
Sent from my Nexus 4
Hi,
First off, I am clueless, it is going to be apparent anyway, lol
I purchased a supposedly unlocked Siemens SX56 off ebay which is fully functional except when I put in my cingular sim card it says "SIM Lock: Please input unlock code:
SId:______________________"
So....I am trying to unlock it with a usb cradle using the XDA-Developers Special Edition ROM 1.2, & I cna follow all the steps untill I start to step 2 the release notes, it then opens "Warning 001: Power Adapter Not Plugged In Please plug the power adapter into your pocket pc" I don't have the travel charger that plugs into the cradle, is this necessary?
I also tried the XDAunlock but I don't think my system is new enough for that, b/c after I move the file to my XDA using active sync I can't open it on my pocket pc, it says "cannot find xda2unlock (or one of it's components) Make sure the path and filename are correct and all the required libraries are available."
What am I doing wrong...please help!
Thanks,
Megan
Also..
The Device Info is as follows:
ROM version: A.20.17 ENG
ROM date:05/15/03
Radio Version: A.20.10
Protocol version: 324e4
Thanks,
Megan
mrsRude said:
Hi,
says "cannot find xda2unlock (or one of it's components) .....
Click to expand...
Click to collapse
Looks like you have used the wrong tool. xda2unlock is for himalaya device xdaunlock for the wallaby...
Anyway. i think this tool is not working with your currently installed ROM Version.
For flashing a new ROM to your device you need the cradle or an usb cable, that also powers your device. If you do not have this, you have to flash the device using the "SD-Card"-Method.
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Thanks so much Stefan! I did get the power cord to the USB cradle and was able to download the XDA Developers Special edition ROM!
Thanks again!
Megan
hello i bought a 6315 on ebay, i want to use it in latin america, gsm 1900, i need to unlcok it, room version is A.20.10 i wanted to download the special rom, but the link doesnt work and room folder on ftp is emty, i know is an old phone,can someone help me please unlock it? [email protected]
Insteed of posting same thing multiple times you should read much more.....
Try this link here for help:
http://www.romkitchen.de/tools/
Stefan
Thanks for this information.
Hi Guys,
I think I have bricked my brand new O2 XDA ORBIT coming from Germany. The seller told me it was sim-unlocked, I immediately connected to the PC and started the file:
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
Waited for the message on the screen and after it finished I hard reset BUT it is stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device don't go further
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device connected.
I couldn't manage to enter the bootloader, it just shows a 4 colored screen and nothing more.... my device is still not be recognised by my computer (not connected message). I tried your C3v2Unlock tool but it says the same : NOT CONNECTED.
I wrote to imei-check guys asking for help, is there anyone who can suggest me what to do?
Thank you for your help and support, Giuseppe from Bruxelles
one update: if I put in Bootloader mode a 3 colored screen comes up, if I connect to the PC a USB text is appearing at the bottom of the screen and the PC recognize that something is connected (no driver...)
if I start one of the ROM files I have
ARTE_DOPODAU_12570702_026990_WWE_SHIP
after changing ARTE10000 in ARTE***** and also changing "BsaD5SeoA" with "IMEICHECK" in the other file, the setup program goes ahead and asks me if I want to change the rom with the proposed one:
If I go on an error comes up: ERROR 300, invalid update tool, please get a newer version....
Any idea on the next steps?
Thank again
don't worry. Look this:
http://forum.xda-developers.com/showthread.php?t=296187
enter in bootloader mode and install this rom art_tmouk_11311001_024990_wwe_ship
byeee
Thanks for the hint, the rom you told is the only one who sarts the updating but it hangs on 3%...what can I try more?
change ARTE1***** to ARTE***** because orbit is arte200.try
peppepep said:
Hi Guys,
I think I have bricked my brand new O2 XDA ORBIT coming from Germany.
.........
Provide more information about what is happening/
1. Deactivate USB activesync connection.
2. Go to bootloader.
3. Connect USB cable/
4. Start mtty.
5. Type set 32 command.
Post output here.
We can try to fix it.
regards,
Click to expand...
Click to collapse
fdp24 said:
peppepep said:
Hi Guys,
I think I have bricked my brand new O2 XDA ORBIT coming from Germany.
.........
Provide more information about what is happening/
1. Deactivate USB activesync connection.
2. Go to bootloader.
3. Connect USB cable/
4. Start mtty.
5. Type set 32 command.
Post output here.
We can try to fix it.
regards,
Click to expand...
Click to collapse
whot mean "type set 32 command"????
Click to expand...
Click to collapse
The ROM art_tmouk_11311001_024990_wwe_ship.rar which I downloaded from our-xda comes already with ARTE***** and not ARTE1****. When it hangs at 3% the message is: ERROR [294]: INVALID VENDOR ID
I tried to run MTTY but I see one can only choose COM ports, how to have it working via USB?
Any hint is higly appreciated.
Giuseppe
Please read my previous post.
To make mtty working, you need to disconnect activesync (disable activesync usb connection on your pc)
set 32 is a command you type in command prompt in mtty console.
regards,
OK, I downloaded another MTTY and I have managed to get this result:
set 32
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x1E3E0000 Bytes
SDInit---
SDInit OK
And now...?
same problem
I have same problem with my o2 xda orbit.
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.27.0.0
....updating but it hangs on 3%...
pls help
sos
hi,guys
why no one answer us? is it difficult?
best regards,
Yang
peppepep,
i think i can recover your device.
regards,
find me on icq.
same problem
i have exactly the same problem as Yang...
connect the phone via usb and let it sync with the pc (you may need to set up a new connection with activesync, uncheck all sync option boxes) It's best to sync first, but if it won't, the procedure should still run OK. Now run C3v2Unlock.exe from imeicheck
http://www.imei-check.com/C3v2Unlock.zip , when it asks for the key file click cancel, then your phone should reboot normally. This worked for me, give it a try.
And also when you flash an O2 Orbit you need to follow carefully the imeicheck instructions for this model, it's not the same as for the artemis or MDA C3
still have problem
Dear Willyfxp,
I do it as you said:
connect the phone via usb and let it sync with the pc (you may need to set up a new connection with activesync, uncheck all sync option boxes) It's best to sync first, but if it won't, the procedure should still run OK. Now run C3v2Unlock.exe from imeicheck
http://www.imei-check.com/C3v2Unlock.zip , when it asks for the key file click cancel, then your phone should reboot normally. This worked for me, give it a try.
And also when you flash an O2 Orbit you need to follow carefully the imeicheck instructions for this model, it's not the same as for the artemis or MDA C3
Windows Display as following:
starting unlock....
detecting device....
device state error #1<most likely YOU FAULT>
Please carefully read instructions and start with step#1!
<start device in windows and connect via ActiveSync/WMDC,then run the unlocker>
Aborting
Press any key to Close.
My device only can go to 3 colored interface.
still have problem.
thanks
Yang
Sim-unlock phone
I believe my phone is Sim-unlocked. I could use O2-germany Sim card and China-Moblie Sim card before flashed my device Rom.
Share with us
Dear fdp24,
If you have solution.pls share with everyone!
thanks,
Yang
yangping said:
I believe my phone is Sim-unlocked. I could use O2-germany Sim card and China-Moblie Sim card before flashed my device Rom.
Click to expand...
Click to collapse
It has nothing to do with ROM Flashing - U have to be SuperCID - its different "lock". I hve O2 Orbit-UK, i got it simunlocked, but it wasnt superCID unlocked. So i paid GBP20 to imecheck
Willyfxp said:
connect the phone via usb and let it sync with the pc (you may need to set up a new connection with activesync, uncheck all sync option boxes) It's best to sync first, but if it won't, the procedure should still run OK. Now run C3v2Unlock.exe from imeicheck
http://www.imei-check.com/C3v2Unlock.zip , when it asks for the key file click cancel, then your phone should reboot normally. This worked for me, give it a try.
And also when you flash an O2 Orbit you need to follow carefully the imeicheck instructions for this model, it's not the same as for the artemis or MDA C3
Click to expand...
Click to collapse
this is not going to work, because imei-check is loading fake bootloader from windows mobile, but you are in bootloader mode. binary will not load on your device, you won't be able to change CID. even if you would, it would be useless, because you need .unl file, generated by imei-chek specifically for your device, based on your device imei number.
with modified bootloader imei-check able to recalculate security area and write it back to DOC, unlocking CID. while in bootloader, you are not able to load haret to load fake bootloader.
it depends case by case. it is not always 100% possible for me to recover device. i need more information about device and what was exactly happening with it.
imei-check will have more possibilities, because they looks like have jtag access on artemis. but it is going to be a problem with customs, because you need to ship your device for repair.
regards.
My friend bought long time ago; on ebay. Appears sim-locked.
Now i'm trying to help him in unlocking, i have read lot of treads, and tryed several programs, but still no luck.
Can you guys please help me and advise how to ulock the phone.
Configuration is:
T-Mobile pw10b1
MS Pocket PC v.3.0.12039 (buid 11178)
ROM 3.08.10 ENG (07/11/02)
Radio 6.02
Protocol 324e4
Bootloader 5.15
Network adapters:
AsyncMac1 NDISWAN Adapter
NE2000 Compatible Ethernet driver
PPTP1 NDISWAN Adapter
What I did:
using this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
-Installed ActiveSync from MS site;
-Backup the ROM to SD and to PC using XDATools;
-Tryed to flash bootloader with 'pnewbootloader bootloader_v5_15.nb0' but it returns an error 'Unable to find flash info offset, cannot disable bootloader writeprotect'
?? May be it's because i'm already on 5.15 bootloader?
-then i tried to Install the 'XDA-Developers Special Edition ROM 1.2' but error said that BIOS is for pw10A1, not mine.
?? where can i get Special ROM for pw10b1?
-then i'm tried to go to http://www.romkitchen.de/, but didn't use the ROM because not sure if works (phone is not mine). Which ROM to use, will WM2003 SE work on mine phone? Will it remove SIMlock?
- i'm reading about the XDAunlock program, on web said: Please note that XDAunlock will only work on device with a PPC2002 ROM that has the Wireless Modem feature. Do I have PPC2002? Do I have Wireless Modem?
Thank you in advance for help!
ps is it possible to get unlock-code some where? Upgrading ROM can be too risky (phone is not mine...)
First of all, since you have already backuped the ROM of the devie would you be able to send me the File?
Cocnerning XDA Special ROM. Normally faslhing that should work either for PW10A and for PW10B devices. There is a tool called adaptrom (http://wiki.xda-developers.com/index.php?pagename=adaptROM) that can be used for flashing.
But I´m not quite sure if this ROM will work for unlocking the device. The Radio Stack of the device is also quite old. But you can give it a try. Securest way for flashing is via SD-Card.
Done this hundred of times already.....
Stefan
HI!
Just tryed to install new ROM via SD-card from romkitchen, and it works!
Everething but SIMUnlock
(3.17 and XDAunlock were included...
Please advsise how can i remove it?
Also, when i boot from SD it said - CE, not CTE+Boot - is it ok?
Will WM2003SE work on my XDA?
as for flash file, i'm going to put it on the rapidshare, so i don't need to brake it apart...
can i burn NK.nbf onto SD? I have it from XDA-developers Special Edition ROM?
Thanks again
http://www.romkitchen.de/ roms also 2003SE
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD guide how to get .nbf to the sdcard
Rudegar said:
http://www.romkitchen.de/ roms also 2003SE
Click to expand...
Click to collapse
Thanks! but i wonder if 2003se can be installed onto my box...
Rudegar said:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD guide how to get .nbf to the sdcard
Click to expand...
Click to collapse
yap, this page i'm using.... Can you please advise me - what is difference between .nbf and .nb1 ROM's.
any ideas how to remove simlock on my xda?
appreciate your help!
http://wiki.xda-developers.com/index.php?pagename=WallabyFileFormats/nb1
vs.
http://wiki.xda-developers.com/index.php?pagename=WallabyFileFormats/nbf
try reading this about unlock
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
I put my ROM:
http://rapidshare.de/files/38022282/rombackup2.nbf.html
Also, I put XDA-developers Special Edition ROM - just copied NK.nbf file onto SD-card using XDA tools.
But XDAunlock didn't run on xda boot... but i found this file in \Windows\ directory and run manually - and it's WORKS!
THANKS A LOT FOR YOUR HELP!!!
After that I upgraded Radio to 6.24.00 (no sure I this would remove sim-lock, didn't test; hope this version is stable/better that my previous 6.02)
Now i need to find a way to install dual-lauout (Russian) and to install some good Media Player (with avi, mp3, mov, wma and 3gp) - can you give me any advices?
Thanks again for all your activities and for your site!
ps forgot to ask - my devise became pw10A1, not pw10B1, is there are any risks with that?
http://www.pocketpcfreewares.com/en/index.php?soft=813
== best audio player imho
http://tcpmp.corecodec.org/ best video player which also play audio
is really useful for me, I am glad to read it here.
asvaran said:
My friend bought long time ago; on ebay. Appears sim-locked.
Now i'm trying to help him in unlocking, i have read lot of treads, and tryed several programs, but still no luck.
Can you guys please help me and advise how to ulock the phone.
Configuration is:
T-Mobile pw10b1
MS Pocket PC v.3.0.12039 (buid 11178)
ROM 3.08.10 ENG (07/11/02)
Radio 6.02
Protocol 324e4
Bootloader 5.15
Network adapters:
AsyncMac1 NDISWAN Adapter
NE2000 Compatible Ethernet driver
PPTP1 NDISWAN Adapter
What I did:
using this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
-Installed ActiveSync from MS site;
-Backup the ROM to SD and to PC using XDATools;
-Tryed to flash bootloader with 'pnewbootloader bootloader_v5_15.nb0' but it returns an error 'Unable to find flash info offset, cannot disable bootloader writeprotect'
?? May be it's because i'm already on 5.15 bootloader?
-then i tried to Install the 'XDA-Developers Special Edition ROM 1.2' but error said that BIOS is for pw10A1, not mine.
?? where can i get Special ROM for pw10b1?
-then i'm tried to go to http://www.romkitchen.de/, but didn't use the ROM because not sure if works (phone is not mine). Which ROM to use, will WM2003 SE work on mine phone? Will it remove SIMlock?
- i'm reading about the XDAunlock program, on web said: Please note that XDAunlock will only work on device with a PPC2002 ROM that has the Wireless Modem feature. Do I have PPC2002? Do I have Wireless Modem?
Thank you in advance for help!
ps is it possible to get unlock-code some where? Upgrading ROM can be too risky (phone is not mine...)
Click to expand...
Click to collapse
u no need special rom for 10b1. just try to run adaptrom before start program A. it will work