Hello
Phone is in fastboot mode after updating magisk.
I can not reboot it with minimal ADB and Fastboot. It says waiting for any device. I installed usb driver manually following guidelines from https://gsmusbdriver.com/xiaomi-mi-9t and restarted computer and tried again with no success. any help would be much apreciated.
thanks in advance
zuy said:
Hello
Phone is in fastboot mode after updating magisk.
I can not reboot it with minimal ADB and Fastboot. It says waiting for any device. I installed usb driver manually following guidelines from https://gsmusbdriver.com/xiaomi-mi-9t and restarted computer and tried again with no success. any help would be much apreciated.
thanks in advance
Click to expand...
Click to collapse
Extract boot.img from the correspinding recovery/zip or fastboot/tgz firmware and flash from Fastboot to boot
zgfg said:
Extract boot.img from the correspinding recovery/zip or fastboot/tgz firmware and flash from Fastboot to boot
Click to expand...
Click to collapse
i extracted boot.img, put it in minimal ADB and Fastboot and tried to flash with fastboot flash boot boot.img but no success. IT says waiting for any device. fastboot devices doesnt show any device. the cable is fine, there s usb driver , I dont know what s wrong
zuy said:
i extracted boot.img, put it in minimal ADB and Fastboot and tried to flash with fastboot flash boot boot.img but no success. IT says waiting for any device. fastboot devices doesnt show any device. the cable is fine, there s usb driver , I dont know what s wrong
Click to expand...
Click to collapse
fastboot devices
does not respond?
Then something should be wrong with PC, cables or device hardly bricked
PS: Is it really in Fastboot mode, did you successfully unlock Fastboot preciously?
yes I did succesfully unlock Fastboot previously. Now fastboot devices not respond.
It looks like it s hardly bricked. Is there anything I can do with hard bricked phone?
Related
I have vs980 and bricked it. Can't access factory hard reset with the button combo. Only fast boot. Mac only and won't be using parellels because of the hassle. Please help.
wadamean said:
I have vs980 and bricked it. Can't access factory hard reset with the button combo. Only fast boot. Mac only and won't be using parellels because of the hassle. Please help.
Click to expand...
Click to collapse
When your in fastboot mode, does your phone get recognized by your computer?
Are you able to use fastboot.exe commands? If so you could download your recovery again, extract the recovery.img file and do,
Code:
fastboot flash recovery recovery.img
That would essentially get your recovery back.
You could also find your boot.img file for the VS980 and do,
Code:
fastboot flash boot boot.img
.
Edit: I just remembered you're on mac and fastboot.exe wouldn't exist (duh). You could possibly follow this guide to setup adb and fastboot on mac.
yes my mac recognizes fastboot on my phone. which recovery img file should i flash on it? i have flashed the twrp 2.8.5.0 from their official website but i still cant get factory reset button combo to work. I have all that fastboot and adb working on my mac all configured and ready.
d00lz said:
When your in fastboot mode, does your phone get recognized by your computer?
Are you able to use fastboot.exe commands? If so you could download your recovery again, extract the recovery.img file and do,
Code:
fastboot flash recovery recovery.img
That would essentially get your recovery back.
You could also find your boot.img file for the VS980 and do,
Code:
fastboot flash boot boot.img
.
Edit: I just remembered you're on mac and fastboot.exe wouldn't exist (duh). You could possibly follow this guide to setup adb and fastboot on mac.
Click to expand...
Click to collapse
Fast boot and adb all set up and ready.
Was supposed to flash CM13 Rom. I did a full wipe including system via TWRP.
Before flashing I decided to reboot into recovery, but it didn't. Only gets stuck in the MI logo now. Can't boot into recovery anymore.
I can go into Fastboot mode. Tried flashing twrp via ADB but whenever i type 'adb devices' in command prompt it says device is offline.
Tried to enter EDL via ADB in fastboot mode, it gets stuck at 'waiting for device'.
When plugged in PC, it gets detected as USB ADB interface
Bootloader was unlocked prior, was on xioami.eu ROM before this. I have TWRP system backup of last ROM installed.
Hoping someone can point me in the right direction on what to do next. Very much appreciated, thank you.
Hi Supdow,
I was facing with the same issue and I also thought I bricked my phone... No worries. To solve it is very easy, just unlock your bootloader again with Mi UnlockTool. Than you have access to your recovery again.
Good luck!
Boesila said:
Hi Supdow,
I was facing with the same issue and I also thought I bricked my phone... No worries. To solve it is very easy, just unlock your bootloader again with Mi UnlockTool. Than you have access to your recovery again.
Good luck!
Click to expand...
Click to collapse
Do I have to apply to unlock the bootloader again like the first time?
Boesila said:
Hi Supdow,
I was facing with the same issue and I also thought I bricked my phone... No worries. To solve it is very easy, just unlock your bootloader again with Mi UnlockTool. Than you have access to your recovery again.
Good luck!
Click to expand...
Click to collapse
Was able to unlock bootloader again, but I still can't access recovery. I may have forgotten how to exactly do this since the last time I did it. What do i have to do after unlocking bootloader? I tried flashing TWRP via fastboot but it only gives me an error.
So you have a few options
1. Hold volume+ & - and power (if you have twrp)
2. Take fedosis twrp 3.1 and installer, put twrp 3.1 into extracted installer folder, then shift+right click on installer folder, open cmd, then type
fastboot flash recovery twrp_name.img
fastboot boot twrp_name.img (or do step 1)
3. Just flash dev/stable with miflash (recommendation: go into fastboot, then like step 2 go into cmd and type fastboot oem edl then flash mi rom)
Hope this helps
bekcicandrej said:
So you have a few options
1. Hold volume+ & - and power (if you have twrp)
2. Take fedosis twrp 3.1 and installer, put twrp 3.1 into extracted installer folder, then shift+right click on installer folder, open cmd, then type
fastboot flash recovery twrp_name.img
fastboot boot twrp_name.img (or do step 1)
3. Just flash dev/stable with miflash (recommendation: go into fastboot, then like step 2 go into cmd and type fastboot oem edl then flash mi rom)
Hope this helps
Click to expand...
Click to collapse
Thank you, finally on CM13 fedosis!
my device got soft bricked It can just enter into fastboot mode,nothing else.what should I do?
raj8655 said:
my device got soft bricked It can just enter into fastboot mode,nothing else.what should I do?
Click to expand...
Click to collapse
Search on Google.
You need to use fastboot to install a new ROM.
You will need;
ABD Drivers https://adb.clockworkmod.com/
Minimal ADB and Fastboot https://forum.xda-developers.com/showthread.php?t=2317790
TWRP https://twrp.me/oneplus/oneplustwo.html
Might as well go Oreo https://forum.xda-developers.com/oneplus-2/development/rom-lineageos-15-0-t3668056
Magisk for Root https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
And a guide;
https://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Hello,
Can anyone assist me in fixing my issue? My phone couldn't boot to recovery mode, i see the TWRP bluescreen and it immediately enters the boot loop. I can boot to fastboot&rescue mode but adb is not detecting my devices. I tried reinstalling the driver and also restart the adb server, but no luck. Tried different USB ports \cable\laptop, but no luck.
Need some assistance or direction to address this issue.
Regards
sri1225 said:
Hello,
Can anyone assist me in fixing my issue? My phone couldn't boot to recovery mode, i see the TWRP bluescreen and it immediately enters the boot loop. I can boot to fastboot&rescue mode but adb is not detecting my devices. I tried reinstalling the driver and also restart the adb server, but no luck. Tried different USB ports \cable\laptop, but no luck.
Need some assistance or direction to address this issue.
Regards
Click to expand...
Click to collapse
adb does not work in the bootloader (Fastboot mode)
in bootloader use
fastboot boot twrp.img
just be sure twrp has the correct name and is in the same folder as adb / fastboot
@sri1225,
Adding to clsA post:
If the phone is in fastboot mode, "fastboot devices" should work to confirm PC connection is good and produces a similar response as "adb devices" does when in adb mode.
What led up to the phone getting broken? You said it's bricked - so it won't boot up to normal operating mode?
clsA said:
adb does not work in the bootloader (Fastboot mode)
in bootloader use
fastboot boot twrp.img
just be sure twrp has the correct name and is in the same folder as adb / fastboot
Click to expand...
Click to collapse
divineBliss said:
@sri1225,
Adding to clsA post:
If the phone is in fastboot mode, "fastboot devices" should work to confirm PC connection is good and produces a similar response as "adb devices" does when in adb mode.
What led up to the phone getting broken? You said it's bricked - so it won't boot up to normal operating mode?
Click to expand...
Click to collapse
I tried to flash with the B180+Stock+Rom, after that I cannot go back to TWRP or in recovery mode.
When I do the "fastboot boot twrp.img", in the fastboot&rescue mode, the phone reboots to twrp screen and goes back to the boot loop again. I have tried both the twrp images available in the forum for this device.
Regards
sri1225 said:
I tried to flash with the B180+Stock+Rom, after that I cannot go back to TWRP or in recovery mode.
When I do the "fastboot boot twrp.img", in the fastboot&rescue mode, the phone reboots to twrp screen and goes back to the boot loop again. I have tried both the twrp images available in the forum for this device.
Regards
Click to expand...
Click to collapse
The B180 stock rom replaces TWRP with stock recovery
If you want TWRP again flash it from the bootloader
fastboot flash recovery twrp.img
when you enter TWRP
goto Wipe/Format Data/ and type yes
now you can root the phone or leave it as is
Fwiw, the 'boot' command only boots twrp, it doesn't flash it. Thats useful for testing that twrp works. The proper command to flash is immediately above this post. Take it from me - always test first. If it boots, it works.
clsA said:
The B180 stock rom replaces TWRP with stock recovery
If you want TWRP again flash it from the bootloader
fastboot flash recovery twrp.img
when you enter TWRP
goto Wipe/Format Data/ and type yes
now you can root the phone or leave it as is
Click to expand...
Click to collapse
Tried flashing TWRP but didn't work. Couldn't get to TWRP screen at all.
sri1225 said:
Tried flashing TWRP but didn't work. Couldn't get to TWRP screen at all.
Click to expand...
Click to collapse
Try the command 'fastboot devices', what does it output..? Are you sure you are in fastboot mode, with the screen and the Android with its chest popped open..?
So im having trouble flasing a custom recovery to my tab s6 lite (wifi) smp610 i have oem unlock enabled but im having trouble finding the right twrp.img as well as getting odin to work with it can anyone help me out please
First, go to TWRP.me and see if you can find your twrp?
Pachacouti said:
First, go to TWRP.me and see if you can find your twrp?
Click to expand...
Click to collapse
Okk so is there a certain Odin I must use
But did you find your twrp? What version of Odin?
Pachacouti said:
But did you find your twrp? What version of Odin?
Click to expand...
Click to collapse
This is it correct and I was using 3.12 by prince comsey I used it before for my other older samsung tablet
Do this on pc:
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img (the twrp NAME of the twrp you just downloaded)
fastboot -w
fastboot boot recovery
Then let me know
Pachacouti said:
Do this on pc:
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img (the twrp NAME of the twrp you just downloaded)
fastboot -w
fastboot boot recovery
Then let me know
Click to expand...
Click to collapse
And do I do this as admin
And in download mode (I've never used Adb and fastboot but I have rooted many devices )
Yeah, I right click and grant admin full control so I dont need to think about 'admin' rights lol, good pointer for noobs... but download mode would actually be:
fastboot reboot edl?
You'll be using adb a lot more until magisk can flash all boots OFFLINE
Pachacouti said:
Yeah, I right click and grant admin full control so I dont need to think about 'admin' rights lol, good pointer for noobs... but download mode would actually be:
fastboot reboot edl?
Click to expand...
Click to collapse
So basically just plug it up. And start
Yup, but edl is for emergency flashing... last resort
If you do edl mode, best to reflash stock and start again
So it boots to the stock recovery not twrp
Yeah, then reflash twrp
There's a few choices here, the choice is yours
Soz, let me try to be a bit clearer.
For edl you need to use the flashing software that your fone maker provides to flash your stock image.
Load stock image into this flashing tool and let it check itself, (it just checks integrity of rom)
power off fone
In the flashing tool, hit the flash button, may say start, may say write...
Plug fone into pc
Let us know.
Still didn't work I tried everything it just sits there saying that it's trying to flash recovery.img and that's it never completes nothing