Related
Dear Seniors.
I am facing great hardship because my phone is stuck at boot logo.
No booting in recovery mode to flash another rom.
I did unlock bootloader of it by using tuliptool with success. After that i flashed custom rom in it. after reboot it is happening that.
Please suggest to recover it.
Did you flash twrp after unlocking? Did you make backup of stock ROM? Perhaps find a version of the factory firmware and flash that.
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
modorate said:
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
Click to expand...
Click to collapse
I found software update notification but when i update an error accruing while update. (This update not compatible with this device"
In easy words......... my recovery.img has been corrupted. I have no idea to get rid of this situation.
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
bao_gg said:
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
Click to expand...
Click to collapse
Several people myself included have been able to use tuliptool to successfully unlock and root the device.
mine is hard bricked too. but I think it is worse than the case listed on the op.
if you want to hard bricked these are the steps:
follow the procedure to install the Spanish ROM 6.1, than another android m b12, than finally the android seven......use tulip tool and install twpr fine, root ect. amazing ROM.......buuuuut......I lost my IMEI somewhere in this process, and the original FTM which had a small menu changes to another static one, without the menu.
I needed this menu to open the com port to fix the IMEI. than I had the brilliant idea to re-flash android M via twrp (without modifying the zip file to remove the recovery, something I knew so well from the older axon mini).
results:
-lost twpr because the stock ROM wrote over it,
-cannot boot the OS because I flashed android m but the phone had the aboot 7.
-i now have a brick
I need a genious to sujest something to bring it back to life........sh....t...sh...t.....sh...t
any chances I could inject aboot7 via ADB through my dead recovery which somehow the phone recognises? ADB shell still seems to be working
thanks
Hi I have tb-x304f.
I installed TWRP to get root access and by mistake I deleted my backup and now I can't update to 8.1.
So can someone give me backup img?
Thanks :good:
AlmogEd said:
Hi I have tb-x304f.
I installed TWRP to get root access and by mistake I deleted my backup and now I can't update to 8.1.
So can someone give me backup img?
Thanks :good:
Click to expand...
Click to collapse
They don't have images like Google devices, but flashable firmwares.
http://lenovo-forums.ru/files/category/287-lenovo-tab4-a10-tb4-x304l/ has it, second from the bottom, underneath all the OTAs. Double check that you got the 4F and not the 4L one.
I don't have this device so I cannot help you with it if you have issues, nor can I say this will work for you. I also really don't profess to be any kind of an expert so do ask in one of the other Tab 4 threads if needed... but I do have the TB-8704F & have restored it to stock several times and I would assume the devices to be identical in process so I can give you a guide if needed! The general path is:
Download the zip and extract it
Download and install Xiaomi Mi Flash (some say to use QFIL but it often throws up errors and sometimes requires flashing in multiple passes, when Mi Flash doesn't)
Plug your device into your PC
Put your device into Emergency Download Mode, easiest way for you is probably to first reboot to TWRP which you luckily already have installed
In TWRP go to Advanced>Terminal>type Reboot EDL
Open Mi Flash and it should see your device. Click Select, open the images directory in your extracted firmware and it should detect the flashing process XML
Click Flash, then leave everything to complete
I will warn you that you will lose everything on your device. There's no way around this that I know of, nor would I suggest it anyway. Just back up everything before doing the restore.
+ Good luck! But honestly I'd first weigh up whether you really want to update to 8.1 since you're already on a perfectly-working device. They already pushed the OTA once and had to retract it because of the amount of serious errors it had - but that's your call entirely.
AlmogEd said:
Hi I have tb-x304f.
I installed TWRP to get root access and by mistake I deleted my backup and now I can't update to 8.1.
So can someone give me backup img?
Thanks :good:
Click to expand...
Click to collapse
bro help me unlocked the bootloader yesterday and flashed recovery but then decided to downgrade the system with system sparse image in fastboot mode provided by o.p. of rooting thread, but now it is not booting up just showing lenovo logo and in fastboot mode again
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were _Flash_lock.bat, _Flash_.bat, _Flash_erase_userdata_lock.bat and _Flash_erase_userdata_lock.bat files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
finxminx said:
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were “_Flash_lock.bat”, “_Flash_.bat”, “_Flash_erase_userdata_lock.bat” and “_Flash_erase_userdata_lock.bat” files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
Click to expand...
Click to collapse
what about deleting those underscores before each word, i think they shouldn't be there.
kuartito said:
what about deleting those underscores before each word, i think they shouldn't be there.
Click to expand...
Click to collapse
I tried but no success. Maybe I'm doing wrong to use mi flash tool. Maybe I should just try to use bat files through fastboot, I don't know. I haven't found any information on the forum or google if I can do it like that.
finxminx said:
I tried but no success. Maybe I'm doing wrong to use mi flash tool. Maybe I should just try to use bat files through fastboot, I don't know. I haven't found any information on the forum or google if I can do it like that.
Click to expand...
Click to collapse
i'm by no means an expert and my advice has no value at all, but i don't see why you wouldn't give flashing from fastboot a try.
1: Those firmware are not meant for miflash, flash using twrp
2: Don't use the script that locks if you wanna avoid trouble.
What directory did you select in miflash?
JakobSWE said:
1: Those firmware are not meant for miflash, flash using twrp
2: Don't use the script that locks if you wanna avoid trouble.
Click to expand...
Click to collapse
I downloaded 3 copies of 10.0.3.0 firmware from different places and each one claimed those firmwares were for fastboot, not twrp. I attached the folder's screenshot.
henk_j said:
What directory did you select in miflash?
Click to expand...
Click to collapse
I attached the screenshot of the directory.
finxminx said:
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were _Flash_lock.bat, _Flash_.bat, _Flash_erase_userdata_lock.bat and _Flash_erase_userdata_lock.bat files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
Click to expand...
Click to collapse
flash this official pie rom
http://bigota.d.miui.com/V10.0.4.0....0.PDHMIXM_20190104.0000.00_9.0_2cee840c96.tgz
...
Stuck in Loading Screen after Update Magisk
I have the same problem here,, This morning i got nontification from Magisk to update to the new version,, and update done, Magisk start reboot,,, when reboot,, i always stuck on Loading Screen. I check from TWRP my Internal Storage cannot detect by Pc,, So i think i cannot doing Flashing by TWRP,, I'm wipe out all data to clear this mess,, so i start to do a flashing with MIFlash, i'm download the custom rom and start flashing.. and i got this message "cannot found file flash_all_lock.bat"
Sorry for my Bad english.. cus i'm still young
Hello everyone i am in desparate need of some guidance where i unfortunately Hard bricked my Mi9t while trying to flash the new Mokee Rom.
Where i think i went wrong was wiping the system option in twrp. After reboot i was stuck on flashboot and unable to get back into twrp recovery.
I then proceeded to flashboot twrp, also used multiple versions of twrp, again to hopefully be able to get into twrp recovery with no prevail.
Also tried to fastboot via Miflash tool with all latest fastboot roms available currently but kept getting a anti-rollback error.
So then i searched a way to install recovery or stock rom manually via flashboot commands. This caused me to end up where im at, no fastboot, no recovery, no logo at all. I connect the usb and the phone wont turn on at all, just a dead phone. Power button completely unresponsive now, Vol-Up/Vol-Down + Power and nothing.
I worked on it for countless hours trying to simply get into fastboot now with huge anxiety thinking i killed my phone.
I left my phone to charge all night and woke up this morning trying to get into fastboot again and nothing again.
Can someone please lead me in the right direction???
Everywhere i look the info seems to be outdated. At this point i am willing to send it in for repairs but i live in Indiana, US and there isnt a Xiaomi Service location anywhere in site.
Sad story. What did you do in fastboot? If you can't flash a certain twrp version you would have to do:
1. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (in twrp archives)
2. fastboot erase recovery
3. fastboot flash recovery your-twrp.img
Concerning AntiRollBack:
You can bypass ARB in miflashtool, set the number of your new rom higher or edit the batch/shell-files manually. The first few lines are ARB and device-check.
I know the info comes too late, but maybe someone reads this before trying things the way you did. There have to be some EDL-pins inside the phone to reflash fastboot but you would have to open your phone. My opinion/solution: Cry and send in.
Anyway: Can you tell us what you did to wipe fastboot?
fabsen said:
Sad story. What did you do in fastboot? If you can't flash a certain twrp version you would have to do:
1. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (in twrp archives)
2. fastboot erase recovery
3. fastboot flash recovery your-twrp.img
Concerning AntiRollBack:
You can bypass ARB in miflashtool, set the number of your new rom higher or edit the batch/shell-files manually. The first few lines are ARB and device-check.
I know the info comes too late, but maybe someone reads this before trying things the way you did. There have to be some EDL-pins inside the phone to reflash fastboot but you would have to open your phone. My opinion/solution: Cry and send in.
Anyway: Can you tell us what you did to wipe fastboot?
Click to expand...
Click to collapse
When i 1st attempted to recover twrp i used TWRP 3.1.1-2 fixed from 4PDA. Ran the .exe file and the prompt said both fires installed successfully, but when i did a reboot it wouldnt go into twrp anymore, just stuck in logo so i would end up back in bootloader.
ttp://en.miui.com/thread-942449-1-1.html
This is exactly the instructions i tried to use before i lost fastboot.
At one point while entering the commands, it froze then my phone completely died and could never make it do anything else.
Why the hell did you use an outdated tutorial for an other phone? A few of the commands also wouldn't work because there are only some of these partitions. But if you did it with the right firmware it shouldn't brick anyway. So maybe you were stuck at boot flash. Else you still would be able to boot into fastboot.#
I feel sorry for you bro but it looks like you were searching for a possiblity to brick your phone
fabsen said:
Why the hell did you use an outdated tutorial for an other phone? A few of the commands also wouldn't work because there are only some of these partitions. But if you did it with the right firmware it shouldn't brick anyway. So maybe you were stuck at boot flash. Else you still would be able to boot into fastboot.#
I feel sorry for you bro but it looks like you were searching for a possiblity to brick your phone
Click to expand...
Click to collapse
I kno bro i felt like shyt believe me. Literally all day in panic and anxiety that i just wasnt thinking straight and using any kind of guide i can find and ended up here.
Made some progress today tho.
Since my device manager or MiFlash tool wasnt recognizing my device even when i installed Qualcom drivers and pushing all sorts of buttons lol,
I have now opened her up for some surgery and using the Test-Point EDL method.
https://i.postimg.cc/HWJGWHRw/test-point-redmi-k20-mi-9t.png
While USB connected and shorted these 2 pins my computer finally recognized my device in MiFlash Tool and Device Manager again as Qualcomm HS-USB QDLoader 9008 (COM3)!!!
Now the next problem is the MiFlash tool. I tried to flash rom and status states cannot receive hello packet. From what i understand, i need an authorized account.
Only thing i could find to bypass this was this but currently not yet working. - https://forum.xda-developers.com/mi-8/how-to/unbrick-mi8-edl-authorized-account-t3896677
Any ideas where to go from here?
https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
https://c.mi.com/thread-1479882-1-0.html
I didn't need an authorized account last year but maybe they've changed something. The guides are up to date so maybe follow these steps.
fabsen said:
https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
https://c.mi.com/thread-1479882-1-0.html
I didn't need an authorized account last year but maybe they've changed something. The guides are up to date so maybe follow these steps.
Click to expand...
Click to collapse
Already ran into those sites and actually am currently trying out S-Unlock service to bypass Authorized Account with there XiaomiTool v0.01, and unfortunately again with no prevail.
https://imgur.com/gallery/WMt968b
As you can see i got passed Hello packet, but now it doesn't go passed this message or looks like it didnt do anything.
https://imgur.com/gallery/hHApyJL
Already contacted S-Unlock Admin and now waiting for response. Im assuming im using the right Flashboot Roms. Tried latest flashboot roms from here available. https://xiaomifirmwareupdater.com/miui/davinci/
I also emailed unbrick.ru if they support K20/Mi9T variant and waiting for there reply.
Firmware on your page is not up to date. Use https://mifirm.net/
What device do you have? EEA/Global/CN? And what flashfiles did you use? I'm asking this because the only way I know to brick your device is to flash global/eea-rom on chinese device and lock the bootloader.
fabsen said:
Sad story. What did you do in fastboot? If you can't flash a certain twrp version you would have to do:
1. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (in twrp archives)
2. fastboot erase recovery
3. fastboot flash recovery your-twrp.img
Concerning AntiRollBack:
You can bypass ARB in miflashtool, set the number of your new rom higher or edit the batch/shell-files manually. The first few lines are ARB and device-check.
I know the info comes too late, but maybe someone reads this before trying things the way you did. There have to be some EDL-pins inside the phone to reflash fastboot but you would have to open your phone. My opinion/solution: Cry and send in.
Anyway: Can you tell us what you did to wipe fastboot?
Click to expand...
Click to collapse
Hey,
I'm in a similar boat but I still have fastboot.
I can flash everything I wan't. But flashing a recovery doesn't do anything.
I can not boot into the recovery.
When I boot into the recovery i'm at the bootloop screen.
My PC does recocgnize it as recovery mode tho.
Anyways is there a way to get out of this mess? I wanted to try to flash with miflash over fastboot.img but I can't find any .img to flash.
All I can find are the .zips for twrp.
I didn't want to flash cfw tho. I got into the mess because there was an update today for stock rom and I flashed it with twrp. Because OTA didn't work.
/edit
I found the fastboot files.
But how do I bypass the antirollback error
Waidowai said:
Hey,
I'm in a similar boat but I still have fastboot.
I can flash everything I wan't. But flashing a recovery doesn't do anything.
I can not boot into the recovery.
When I boot into the recovery i'm at the bootloop screen.
My PC does recocgnize it as recovery mode tho.
Anyways is there a way to get out of this mess? I wanted to try to flash with miflash over fastboot.img but I can't find any .img to flash.
All I can find are the .zips for twrp.
I didn't want to flash cfw tho. I got into the mess because there was an update today for stock rom and I flashed it with twrp. Because OTA didn't work.
/edit
I found the fastboot files.
But how do I bypass the antirollback error
Click to expand...
Click to collapse
https://mifirm.net/model/davinci.ttt
to bypass the ARB you can edit the batch/shell files. the first few lines are device-check and ARB. you can also use xiaomitool and select it there.
Edit: I had the same problem with a twrp version I had installed. After switching to russian version I couldn't downgrade twrp. Just try one of the other 2 versions available.
fabsen said:
https://mifirm.net/model/davinci.ttt
to bypass the ARB you can edit the batch/shell files. the first few lines are device-check and ARB. you can also use xiaomitool and select it there.
Edit: I had the same problem with a twrp version I had installed. After switching to russian version I couldn't downgrade twrp. Just try one of the other 2 versions available.
Click to expand...
Click to collapse
I've had the russian version of twrp that didn't allow backups.
I know tried all the other version as well.
What happens is it stays in mi.com unblocked screen and my pc will recognize that it's in recovery but twrp never opens.
Like I said the normal stock recovery is flashable but all other twrp versions don't work for some reason.
I've tried all 3.
I know where the lines are but idk what to write in there.
I tried to just delete the lines and then I've got a different error.
Also when changing the version number it says success it actually flashes for 0 seconds and nothing happens.
Waidowai said:
I've had the russian version of twrp that didn't allow backups.
I know tried all the other version as well.
What happens is it stays in mi.com unblocked screen and my pc will recognize that it's in recovery but twrp never opens.
Like I said the normal stock recovery is flashable but all other twrp versions don't work for some reason.
I've tried all 3.
I know where the lines are but idk what to write in there.
I tried to just delete the lines and then I've got a different error.
Also when changing the version number it says success it actually flashes for 0 seconds and nothing happens.
Click to expand...
Click to collapse
The russian version I've installed allows backups, tried allready.
You can simply remove the lines, just care you dodn't left something or delete too much. Use xiaomitool v2, it'll bypass the lines.
fabsen said:
The russian version I've installed allows backups, tried allready.
You can simply remove the lines, just care you dodn't left something or delete too much. Use xiaomitool v2, it'll bypass the lines.
Click to expand...
Click to collapse
If i download the xiamitool v2 and choose my device is bricked it says feature is not available yet.
/edit
If I choose mod the phone it says my phone serial and all the 3 other things are unknown.
if I select my phone my phone reboots and says waiting for debugging mode....
Then if I delete the ARB lines and try to flash via MiFlash it says error error no such file found
Can someone pls give me some clearer instructions.
Ok I somehow fixed it.
I flashed everything manually like the times before twrp existested.
Now I don't have the OS running but a running twrp.
I could flash xiaomi eu now and be done with it. But I actually wanted to use stock rom and not a costume rom right now because I wanted to switch to a costume rom when a good official comes out whenever that is.
Although flashing the stock rom got me in this mess in the first place. I never had this problem with flashing costume roms.
Anyhow I know this might not be the place to ask but are xiaomi eu and stock actually that different? Also are there any downsides in using it over stock?
My experience on most phones was that early costume roms usually didn't work with all features etc.
/edit
alright who gives a dang I just flashed the eu rom to be safe with updates..
anyhow is it normal that my devices says Redmi by Xiaomi now?
Prior on my stock rom it said MI by mi.com or something
Waidowai said:
Ok I somehow fixed it.
I flashed everything manually like the times before twrp existested.
Now I don't have the OS running but a running twrp.
I could flash xiaomi eu now and be done with it. But I actually wanted to use stock rom and not a costume rom right now because I wanted to switch to a costume rom when a good official comes out whenever that is.
Although flashing the stock rom got me in this mess in the first place. I never had this problem with flashing costume roms.
Anyhow I know this might not be the place to ask but are xiaomi eu and stock actually that different? Also are there any downsides in using it over stock?
My experience on most phones was that early costume roms usually didn't work with all features etc.
Click to expand...
Click to collapse
Basically it's (xiaomi.eu) debloated and optimized but sadly based on chinese official rom. That means no widevine L1.
In my opinion the best rom is EEA (because of "spy restrictions"), debloated with ADBTools with same optimizations which come with mi-globe rombuilder (gpsset, preinstalled magisk, adaway, removed apps). Sadly mi-globe is based on xiaomi.eu which is based on chinese official.
Waidowai
Could you explain the steps you did to flash ALL manual? Which Commands? Which imagens?
Thanks friend.
fabsen said:
Basically it's (xiaomi.eu) debloated and optimized but sadly based on chinese official rom. That means no widevine L1.
In my opinion the best rom is EEA (because of "spy restrictions"), debloated with ADBTools with same optimizations which come with mi-globe rombuilder (gpsset, preinstalled magisk, adaway, removed apps). Sadly mi-globe is based on xiaomi.eu which is based on chinese official.
Click to expand...
Click to collapse
Well i did instal xiaomi.eu now. Not because of optimizations etc.
The only reason is that like i said i don't wanna brick by updating official roms anymore.
I mean maybe it's my bad since I'm running costume roms on all my phones for about 12 years or longer.. can't remember when I started but I think with first xyanogen mod.
And I don't know how to flash stock roms.
But with a costume rom it won't brick and if it does I'm not loosing twrp again.
For debloating I do that myself with the android terminal. So idk what the rom has on bloat I'll just uninstall it.
My only fear was that main features don't work with the costume rom. But from first sight everything but themes work fine. And I couldn't care less.
Well one thing changed the icons look like a chineese appleish phone now. Oh well I'll change that later.
Other than that the fingerprint is more responsive which I do like.
And for some reason my Modelnumber changed from Mi 9T to RedmiK20. Even on the boot it says Redmi now instead of MI.
Idk if it's because of the ROM or because I manually flashed the phone.
---------- Post added at 02:51 PM ---------- Previous post was at 02:42 PM ----------
mauriciocardoso said:
Waidowai
Could you explain the steps you did to flash ALL manual? Which Commands? Which imagens?
Thanks friend.
Click to expand...
Click to collapse
Just download the fastboot rom and flash everything but dummy. You can flash dummy to but that is just for ARB. Depending on what your ARB index is you can flash it to ignore future problems.
My index was 1 tho and apperently if it's under 4 ARB is supposed to be irrelavent.
I'm not to sure on ARB tho because it's my first time dealing with ARB.
Other then that u flash everything else.
You will end up with a phone that is empty. Basically you reformate your phone so nothing is on there but TWRP. My phone was at 59gb/60 or something like that. basically the only folder I've had left was twrp.
Like I said I remembered the method from like 8 years ago when we didn't have twrp.
The problem with this method is that you can easily hardbrick tho I think. Since if it doesn't work you turned your phone into a fancy usb drive.
I only did it because I thought of buying a new one so since the phone was dead in my eyes already I just tried the old method and it worked fine, besides rebranding the phone to RedmiK20 from Mi9T.
Anyhow if your not giving up on the phone yet I wouldn't try it. Only try if you wanna throw the phone in the trash anyways.
just like me , for the anti roll issue u need to flash newers rom like from latest u flash on ur device before (recommend V10.3.11.0.PFJMIXM) u can get on mifirm.net . after download rom extract the file into fastboot tools then copy all .img file into fastboot tools . after that open the fastboot mode on ur phone and tools on pc
then flash this file
fastboot flash dtbo dtbo.img
fastboot flash logo logo.img
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot flash misc misc.img (u can get on fastboot rom not .zip)
fastboot flash recovery recovery.img (recommend used twrp-3.3.1-2-davinci-fix)
then try reboot phone into recovery
if work let me know . im trying make this method because before this i got this problem to after flashing paranoid rom without format data .
Waidowai said:
Well i did instal xiaomi.eu now. Not because of optimizations etc.
The only reason is that like i said i don't wanna brick by updating official roms anymore.
I mean maybe it's my bad since I'm running costume roms on all my phones for about 12 years or longer.. can't remember when I started but I think with first xyanogen mod.
And I don't know how to flash stock roms.
But with a costume rom it won't brick and if it does I'm not loosing twrp again.
For debloating I do that myself with the android terminal. So idk what the rom has on bloat I'll just uninstall it.
My only fear was that main features don't work with the costume rom. But from first sight everything but themes work fine. And I couldn't care less.
Well one thing changed the icons look like a chineese appleish phone now. Oh well I'll change that later.
Other than that the fingerprint is more responsive which I do like.
And for some reason my Modelnumber changed from Mi 9T to RedmiK20. Even on the boot it says Redmi now instead of MI.
Idk if it's because of the ROM or because I manually flashed the phone.
---------- Post added at 02:51 PM ---------- Previous post was at 02:42 PM ----------
Just download the fastboot rom and flash everything but dummy. You can flash dummy to but that is just for ARB. Depending on what your ARB index is you can flash it to ignore future problems.
My index was 1 tho and apperently if it's under 4 ARB is supposed to be irrelavent.
I'm not to sure on ARB tho because it's my first time dealing with ARB.
Other then that u flash everything else.
You will end up with a phone that is empty. Basically you reformate your phone so nothing is on there but TWRP. My phone was at 59gb/60 or something like that. basically the only folder I've had left was twrp.
Like I said I remembered the method from like 8 years ago when we didn't have twrp.
The problem with this method is that you can easily hardbrick tho I think. Since if it doesn't work you turned your phone into a fancy usb drive.
I only did it because I thought of buying a new one so since the phone was dead in my eyes already I just tried the old method and it worked fine, besides rebranding the phone to RedmiK20 from Mi9T.
Anyhow if your not giving up on the phone yet I wouldn't try it. Only try if you wanna throw the phone in the trash anyways.
Click to expand...
Click to collapse
Don't know how you manage to brick your phone with official firmware tbh. And why should you lose TWRP? I flashed about 10 times (global, eea, chinese, xiaomi.eu, mi-globe) and I still didn't have to reflash twrp once. It won't even touch the recovery partition. I also don't see a reason to mess with fastboot (except your brick haha). The boot behavior (redmi instead of mi) is fine, depends on the rom you've flashed. If you flash global or eea rom it'll switch back to "Mi".
What do you mean by "I don't know how to flash official rom"? Boot up twrp, clean dalvik cache/cache, install... tadaaa. I was also using custom roms on all of my phones but I can't find a reason for now to do so. I see only bugs and things not working. I want my widevine L1 and I want AndroidAuto to be working. I'll stay on global/eea till a good rom pops up.
fabsen said:
Don't know how you manage to brick your phone with official firmware tbh. And why should you lose TWRP? I flashed about 10 times (global, eea, chinese, xiaomi.eu, mi-globe) and I still didn't have to reflash twrp once. It won't even touch the recovery partition. I also don't see a reason to mess with fastboot (except your brick haha). The boot behavior (redmi instead of mi) is fine, depends on the rom you've flashed. If you flash global or eea rom it'll switch back to "Mi".
What do you mean by "I don't know how to flash official rom"? Boot up twrp, clean dalvik cache/cache, install... tadaaa. I was also using custom roms on all of my phones but I can't find a reason for now to do so. I see only bugs and things not working. I want my widevine L1 and I want AndroidAuto to be working. I'll stay on global/eea till a good rom pops up.
Click to expand...
Click to collapse
I mean yeah that's what i thought just flash a official rom like any stock rom. Or rather if you change roms cuz if you update existing roms you don't really need to wipe anything anymore.
But apperently it busted my whole phone. It was a weird brick. My phone wasn't recognized as a phone anymore in fastboot. But it was recognized normal in adb. So I needed to change windows drivers to make my phone recognize.
And after that nothing booted but stock recovery and even then it said I don't have debugging enabled. Eventho I was connected to adb??
Anyhow I think the flash messed up the whole system partition. So what I did is in short formate the whole drive and start with a clean slate.. anyhow don't need to repeat all that.
But yeah I'm with you with the take on costume roms. I don't see the need anymore since most stock roms are decent nowadays and costume roms especially are most likely buggy somehow. Good thing is that most stuff I need in my phone is working on the eu rom. Like I said only thing that I could find not working are themes. But thats ok.
I don't know what that widevine L1 thing is. So I prolly don't need it. But maybe u can explain it to me Always up to learn new things.
Well for now I stick with the costume rom since it's basically no different to me. And the chance of bricking again like that with a costume rom are slim to none. If the phone brick it's most likely just a simple brick that can be fixed with twrp. and if that doesn't work by booting into twrp from adb.
Btw that didn't work on my weird brick either. I couldn't boot anything from adb. It gave me a black screen when trying to boot something.
Anyhow I'm glad I've got it running again. But somehow I'm not that surprised. Most times when I brick phones I can fix it when I'm at the point where I wanna throw the phone away. Cuz then I'm just flashing everything I can to make it work xD.
Just got the xt1687 usa model retus software channel... Is it safe to flash potter roms on here?
itcanbdone said:
Just got the xt1687 usa model retus software channel... Is it safe to flash potter roms on here?
Click to expand...
Click to collapse
What firmware? 7.0 or 8.1? If you are on 8.1 it's as safe as it ever is to flash a custom ROM.
If you're still on 7.0 you should update first and in any case make a full nandroid backup incl. Persist and EFS before you flash anything.
Sent from my Moto G5 Plus using XDA Labs
Currently on 7.0 so unlock bootloader n twrp after update? Thanks
itcanbdone said:
Currently on 7.0 so unlock bootloader n twrp after update? Thanks
Click to expand...
Click to collapse
Yes. If you can update via OTA that should be the way to go. If you can't flash full Motorola signed fastboot 8.1 firmware:
https://mirrors.lolinet.com/firmware/moto/potter/official/
Unlock the BL on Motorola website, boot to or flash TWRP and make a full nandroid incl. persist.
After that you shoud be good to go and flash custom ROMS. Check whether the selected ROM needs 7.0 or 8.1 as base, almost all of them need stock Oreo.
Sent from my Moto G5 Plus using XDA Labs
Oh yeah, I'm rusty.. Software channel duh, linux gets its stuff there... I guess it is potter xt1687, which is odd though as a website said it wasn't potter.. Anyway, looking in the gsm arena and checking against other variants of our g5 plus, it seems that everything but the radios are the same so is it safe to flash variants backing up the original radio? Thank you very much
itcanbdone said:
Oh yeah, I'm rusty.. Software channel duh, linux gets its stuff there... I guess it is potter xt1687, which is odd though as a website said it wasn't potter.. Anyway, looking in the gsm arena and checking against other variants of our g5 plus, it seems that everything but the radios are the same so is it safe to flash variants backing up the original radio? Thank you very much
Click to expand...
Click to collapse
You wrote you're on the retus channel and model is 1687. Here are the firmwares for your device, the second one ( OPS28.85-17-6-2) is the latest and last build, flash that one and everything should be fine:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETUS/
You still know how to fastboot flash? Unzip firmware to ADB/Fastboot folder etc.?
Here's a post I made for someone else, it includes a link to a flashall.bat, put in in there too so you don't have to manually flash all partitions, just double-click it and it'll run all the commands for you.
https://forum.xda-developers.com/g5...solve-imei0-explanation-t3825147/post80478329
Sent from my Moto G5 Plus using XDA Labs
So I was on stock and flashed twrp after successful unlock of bootloader. After backing up, got stuck at bootloader before any further changes made, yet it was booting fine with bootloader before that.. Saw in a post to flash stock after re locking bootloader, then unlick again...
I skipped that just to get a rom on, now running havoc 9.0 but cannot seem to root as the two su & magisk arent cuttin it in twrp.
Are you really telling me I gotta revert back to stock and flash root in stock to get root?
If so, couldnt i just flash havoc 8.1 and root that way.
Yes i still remember how to flash via adb. Thank you very much
itcanbdone said:
So I was on stock and flashed twrp after successful unlock of bootloader. After backing up, got stuck at bootloader before any further changes made, yet it was booting fine with bootloader before that.. Saw in a post to flash stock after re locking bootloader, then unlick again...
I skipped that just to get a rom on, now running havoc 9.0 but cannot seem to root as the two su & magisk arent cuttin it in twrp.
Are you really telling me I gotta revert back to stock and flash root in stock to get root?
If so, couldnt i just flash havoc 8.1 and root that way.
Yes i still remember how to flash via adb. Thank you very much
Click to expand...
Click to collapse
I'm not sure that I understand everything. After flashing (official) TWRP and making a nandroid you weren't able to boot to system, only to bootloader?
Have you updated to 8.1 stock Oreo before?
Havoc needs that definitely:
https://forum.xda-developers.com/g5-plus/development/rom-havoc-os-v2-2-t3906282/post79018816
It won't make any sense to revert to stock and root it because after flashing havoc root will be lost anyway. What do you mean with "the two su & Magisk aren't cuttin it in TWRP"? (English is not my native language)
Why two? There should be magisk only to flash.
So the goal seems to be making TWRP work correctly when running havoc to be able to flash magisk.zip and boot to system.
Can you post a recovery log after the attempt to flash magisk from TWRP (the function is in TWRP/ advanced/log.)
Can you boot to havoc directly now?
Are you able to reach TWRP?
I need the error message that appears when you try to flash magisk, should be in the log.
And what is it about two things, su AND magisk?
Magisk.zip is the su binary.
Please provide some more information and sorry if it's me who don't understand something.
Sent from my Moto G5 Plus using XDA Labs
- I got root after all. Seems I was just flashing no verity before root and it was suppise to be after.
- there was a super su which I'd rather have to mod things with but neither worked until i figured out as mentioned above
- now I'm trying to get gaps to work..
- also having problem flashing rom withou encryption, it keeps forcing it encrypted.
- here is link to 3 images of what i've got currently:
https://mega.nz/#F!q3pVQIDJ!kwfNgjMEEssa97rrZJjWHg
Thanks
itcanbdone said:
- I got root after all. Seems I was just flashing no verity before root and it was suppise to be after.
- there was a super su which I'd rather have to mod things with but neither worked until i figured out as mentioned above
- now I'm trying to get gaps to work..
- also having problem flashing rom withou encryption, it keeps forcing it encrypted.
- here is link to 3 images of what i've got currently:
https://mega.nz/#F!q3pVQIDJ!kwfNgjMEEssa97rrZJjWHg
Thanks
Click to expand...
Click to collapse
Never use SuperSU alongside with magisk but I think you know that now.
To remove encryption: It's not enough to wipe data in TWRP, you have to format it (the option where you have to confirm with "Yes" and not just wipe). That will wipe your internal storage too.
Only formatting data in TWRP will remove the encryption and the Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip will keep it decrypted. Make sure usb debugging is enabled.
Boot to TWRP and flash ROM and Gapps (both in one action without a reboot in between).
Now flash the no verity-force encryption.zip.
You can reboot to system now but you can also flash the magisk.zip directly afterwards, it helps to keep the data partition encrypted too.
I flash everything in a row.
Check that thread: https://forum.xda-developers.com/g5-plus/how-to/guide-how-to-remove-device-encryption-t3863586
(page 2)
Sent from my Moto G5 Plus using XDA Labs
Thanks for the encryption link.. Any idea on the pros n cons on encryption in the world of flashing zips and modding?
I see pros n cons on google search for encryption but not from developments perspective
itcanbdone said:
Thanks for the encryption link.. Any idea on the pros n cons on encryption in the world of flashing zips and modding?
I see pros n cons on google search for encryption but not from developments perspective
Click to expand...
Click to collapse
I decrypt my device, for example to have access to /data in case of a bootloop because of a magisk module. I don't like the idea of not physically seeing parts of my partitions or even not being able to edit it.
From the sight of security it's better to encrypt naturally. It depends a bit how old your device is and what you want to do with it.
I never lost my device or it was getting stolen so as long it's in my pocket I don't need encryption.
But that's just my personal opinion.
Sent from my Moto G5 Plus using XDA Labs
Hey so I found a really cool way to decrypt but ROM after it's already been encrypted and you have all your stuff in it, I figured it out on accident. What I did was simply did a backup through TWRP and formatted the drive. When I restored the drive it was decrypted! And all this time everyone ever told me that you cannot decrypt. Pretty cool. Actually found this out by switching to a ROM and then going back anyway maybe people should know this? Hope it helps thanks for all the pointers