After I tried to flash my phone, it wont start anymore.
If I push Volume Down + Power Button there is still no reaction.
Only the LED is blinkin Red, Green (3x), Red
What did they mean?
Maybe you cant tell me how i can wipe it or something.
I can't connect to PC by the way.
Sorry for my bad english.
Related
hello guys..i'm a newbie in android, and, i have a big problem now. i tried to install another rom instead of the stock one (spanish), and now my device doesn't start at all. i tried many ways, and each time i was able to go to fastboot menu or recovery menu. now, after i've done some steps from this tutorial: http://forum.xda-developers.com/showthread.php?t=491350&highlight=model+incorrect , my device keep restarting by himself. I cannot reach even recovery menu or fastboot menu. It starts the logo screen for 4-5 seconds, and after that is restarting and again the logo, even if i'm trying to press home+power or camera+power. what can i do???
My problem is like in this movie
if i press action button + power, nothing happends on the screen, but the blue led in the right top corners stays powered on. Do you know why?
If you cannot get in to recovery (home + power) or the SPL (power + camera) then you're doomed.
not even with jtag or something, cannot be done?
Unless you physically replace the motherboard (which doesn't look too hard) then no you can't. As of yet there's no Jtag method.
hi i have flashed cm902 rom it booted up but it dont like me cause makes eroros so i wanted ro reflash with old stock 2,3,3 and with recovery bootstrap i thinked what i wild came into recovery but it just hanged and now no recovery only white triangle with yelow! and only logo m, so maybe someone hav this problem earlier and can help me?cause now im searching half day of work for searching for solution.
thanks fo anny help
Dont worry. Do this. First use the wall charger and charge your phone for at least 30mins. So if your phone is off then it will charge till 70-80%. Check if it is charging by looking at the micro-usb port lighting up.
Now go to the White triangle with ! mark. Then press @ button. You will get options. Select erase data by pressing volume button and then clicking enter button on your keypad.
After the wipe has been done pull out battery. Then start RSD Lite on your computer. Put the battery to your phone. Now press both volume up and volume down together and then power button for 2secs. Leave power button. You will see it in bootloader.
Now load sbf file on RSD software and wait for it to recognize your phone. Then click start. Thats it. Your phone should be ok.
Hi room!
i have a problem with my tattoo, he won't boot at every time !
when i plug it to a PC or for charging, the red light is comming until the led light comes green.
it's not recognized on xp or win 7, and i can't enter in fastboot on recovery...
when i hold volume (+) and start, it vibrate 3 times and green led turns!!!
should i flash it with a Jitag ?
thank's
Does it show TATTOO on bootup, is it S-OFF ? What did you do to it and got it in that state ? Try to hold Volume down and then boot it up, that should get you in bootloader
...thanks for your answer!
i can't do anything (i tried to hold Volume down and boot it up but still nothing at screen).
i don't know if the old owner if he flashed it!
i have changed the battery and nothing.
S-OFF?? i can't answer.
when i plugged to my laptop or desktop, i see a red led (charging?!) but if boot it up (the light disappear and nothing at screen).
when i hold Volume up and boot it up, the phone vibrate 3 times and green led appears!!!!!!
another idea to help me ?
thanks
I was using cm10 2/11 for defy green lens.. I flashed indian froyo.. and it didn't boot up.. but when I connect to my comp it shows a white light... and gets detected in rsd lite.. so I flashed Chinese sbf .. den the phone was again black and not booting... not it is not getting detected on my comp but it is showing white led light.. plz help out...:crying:
Try this:
1. Pull out the phone battery
2. Put it back in the phone and press and hold volume down + power button and hold it for about 6-7 seconds, then release.
3. If a Robot logo appeared, you are lucky. Now press volume up + down at the same time, or press back button.
4. You should be in stock recovery now, touch Wipe data and then wipe cache. After that, press Reboot and the system should boot up
Also, a warning: I was flashing that chinese .sbf numerous times, and the result is bricked flashlight. So, flash it only when you need to!
markos807 said:
Try this:
1. Pull out the phone battery
2. Put it back in the phone and press and hold volume down + power button and hold it for about 6-7 seconds, then release.
3. If a Robot logo appeared, you are lucky. Now press volume up + down at the same time, or press back button.
4. You should be in stock recovery now, touch Wipe data and then wipe cache. After that, press Reboot and the system should boot up
Also, a warning: I was flashing that chinese .sbf numerous times, and the result is bricked flashlight. So, flash it only when you need to!
Click to expand...
Click to collapse
I tried the above... but actually i can't even get it to moto symbol.. its just blank black screen.. and now it only shows white led if i connect to comp... any other solution??
Well, you can try flashing another .sbf because I dont know what to do anymore
markos807 said:
Well, you can try flashing another .sbf because I dont know what to do anymore
Click to expand...
Click to collapse
Hey.. i fixed my defy... the battery was discharged totally.. so rsd lite wasn't detecting.. den i used a universal charger.. some chinese thingy.. which charged my battery.. :good: and rsd lite detected it...
Rooted my Lg G2, downloaded freegee, installed TWRP, turned off and wont turn on. no boot loop or anything. if I hold power+volume-down long enough it will flash a red LED but nothing else. will not connect to my computer. PLEASE tell me if there is any way to fix it.
Take out usb power. Switch off. Wait couple seconds. Press power button, and on LG screen press volume down and power at same time and keep pressed. Then it reboots into factory reset. Which is twrp. Wipe cache and dalvik and boot again.
send from the jungle
compnoobe said:
Rooted my Lg G2, downloaded freegee, installed TWRP, turned off and wont turn on. no boot loop or anything. if I hold power+volume-down long enough it will flash a red LED but nothing else. will not connect to my computer. PLEASE tell me if there is any way to fix it.
Click to expand...
Click to collapse
hold the power+volume up button to get to download mode and on your computer kdz it to your stock firmware 4.2.2 or 4.4.2
bachera said:
Take out usb power. Switch off. Wait couple seconds. Press power button, and on LG screen press volume down and power at same time and keep pressed. Then it reboots into factory reset. Which is twrp. Wipe cache and dalvik and boot again.
send from the jungle
Click to expand...
Click to collapse
The LG logo never appears.
ok turn off, keep pressing volume up, power cord in whilst pressing, do you get download mode? if so reflash kdz or update recovery via lg mobile suite.
if that doesnt work, try installing drivers on computer again, reboot computer, turn on phone connect, check if you can adb to it, then there might.be some how to adb recovery on it, as well as pushing a rom on it. maybe.
did you check twrp size before putting it on? also was it correct version for your phone version?
send from the jungle
I thought flashing red LED light means that the phone is dead and needs to be recharged in order to be turned on again?
I thought flashing red LED light means that the phone is dead and needs to be recharged in order to be turned on again?
Click to expand...
Click to collapse
lol thats a great idea and possible cause
send from the jungle