Galaxy Grand G531 H Stuck on Logo - Galaxy Grand Prime Q&A, Help & Troubleshooting

Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH

any ideas
or
ROM it should try

roo7_shmali said:
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
Click to expand...
Click to collapse
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)

naimrlet said:
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
Click to expand...
Click to collapse
it worked till last second gives me Fail
look at attach file

roo7_shmali said:
it worked till last second gives me Fail
look at attach file
Click to expand...
Click to collapse
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)

^^
Before i read your reply i unzip the file and delete Hidden file and i repack to tar file with 7zip
and start with odin and it Give me pass
but when reboot still stuck on logo
after that i tried your way
give me pass but still stuck on logo

naimrlet said:
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
Click to expand...
Click to collapse
any new ideas plz

roo7_shmali said:
any new ideas plz
Click to expand...
Click to collapse
Try using smart switch/kies and then go to "firmware initialization..." and restore your phone there
If not detect click the "reinstall driver" and reconnect your device.
If still not detect maybe you mess up something on your phone...

Still not working?

Related

Odin flash fail

Hello,
I'm new here
My problem started when my CSC got stuck on SEE after trying to go back to stock rom from XEO ROM. My original CSC is XEH. I tried to use KIES to restore it, it flashed to the newest but my CSC hasnt changed. After that I downloaded ROM from a different regoin marked as XSG and I tried to flash it with ODIN but it failed and now I'm stuck with "Firmware upgrade encountered an issue.." screen. All roms are Official. My download mode shows Secure Download: Enabled. Did I brick my phone?
Sorry for my not so perfect english
My mode is N910C with Exynos
TrueMorph said:
Hello,
I'm new here
My problem started when my CSC got stuck on SEE after trying to go back to stock rom from XEO ROM. My original CSC is XEH. I tried to use KIES to restore it, it flashed to the newest but my CSC hasnt changed. After that I downloaded ROM from a different regoin marked as XSG and I tried to flash it with ODIN but it failed and now I'm stuck with "Firmware upgrade encountered an issue.." screen. All roms are Official. My download mode shows Secure Download: Enabled. Did I brick my phone?
Sorry for my not so perfect english
Click to expand...
Click to collapse
did you put your phone in Download mode? did you unzipped the file to get the odin flashable file? go to download mode by pressing and holding volume down+home+power for 3 seconds and then let them go, if phone boots into download mode then its not bricked, you just have to download the file and unzipped, to get the Odin file, then open odin, with the phone on download mode, then click pda, search the unzipped file, and flash it, cheers
yoniinfante said:
did you put your phone in Download mode? did you unzipped the file to get the odin flashable file? go to download mode by pressing and holding volume down+home+power for 3 seconds and then let them go, if phone boots into download mode then its not bricked, you just have to download the file and unzipped, to get the Odin file, then open odin, with the phone on download mode, then click pda, search the unzipped file, and flash it, cheers
Click to expand...
Click to collapse
Yes I did all that and everytime I try to flash my phone I get "FAIL" at the end and the same screen at boot.
TrueMorph said:
Yes I did all that and everytime I try to flash my phone I get "FAIL" at the end and the same screen at boot.
Click to expand...
Click to collapse
whem u connect the phone to the computer and open odin does the :COM square becomes light blue? if not then something is wrong with the connection, cheers:fingers-crossed:

SM-G935F stuck on slow flashing "SAMSUNG" logo

Hello, I'm not allowed to link to external links but I used Odin with "CF-Auto-Root-hero2lte-hero2ltexx-smg935f.zip" to flash my Samsung Galaxy S7 edge and Odin said "pass". After rebooting it gets stuck at the SAMSUNG logo.
I can hold pwr+home+voldown to get back into the download menu but flashing it again doesn't help either. I'm currently downloading a stock firmware zip file but it's 2 GB and will take some time.
Did I do anything wrong? I believe I followed the steps I had to:
Enabled dev mode.
Enabled OEM unlock.
Rebooted the phone into download mode.
Installed USB drivers for my PC.
Started Odin
Downloaded the "CF-Auto-Root-hero2lte-hero2ltexx-smg935f.zip", extracted it and selected the .md5.tar in "PA" in Odin.
Clicked start.
When it's rebooting I get "RECOVERY IS NOT SEANDROID ENFORCING" but that sounds like gibberish to me... no idea what that's supposed to mean.
is md5.tar file the smallest one of the 2 files in the .zip? I believe you should have used one which is simply .tar, not .md5.tar
solnyshok said:
is md5.tar file the smallest one of the 2 files in the .zip? I believe you should have used one which is simply .tar, not .md5.tar
Click to expand...
Click to collapse
The files in the zip file are "CF-Auto-Root-hero2lte-hero2ltexx-smg935f.tar.md5" and then there's also a copy of an old version of Odin (3.10.x).
You think I need to extra the .md5 file that is inside the .zip? I read some other people considering this and I believe they're only extracting the tar.md5 for curiousity's sake.

Galaxy A5 (SM-A510FD) Stuck At Logo No Recovery

Hello Members
My Galaxy A5 Stuck AT Start Up Screen wont go to Recovery Only Download Mode Is Accessible
i succesfully flash latest stock rom with odin
and also tried 4 file frimware
but wont go pass start up logo
and smart switch show device not supported
You don't need to flash only the stock rom (Only AP slot on Odin). In this case, you need to flash stock recovery and the other stuff (BL, AP,CP, CSC). I don't know where you can get the files.
And how did you break your phone? You tried to root it?
Od1sseas said:
You don't need to flash only the stock rom (Only AP slot on Odin). In this case, you need to flash stock recovery and the other stuff (BL, AP,CP, CSC). I don't know where you can get the files.
And how did you break your phone? You tried to root it?
Click to expand...
Click to collapse
i already said that i tried 4 file flash file (BL. AP. CP. CSC) odin show pass but phone wont go pass boot screen
Have you try samsung smart switch emergency recovery code ? with serian nr mode?
[GS] said:
Have you try samsung smart switch emergency recovery code ? with serian nr mode?
Click to expand...
Click to collapse
yes
but device still stuck at start up logo
shakirbaloch said:
yes
but device still stuck at start up logo
Click to expand...
Click to collapse
Can you install TWRP from odin?
I have the same problem with my A510f...
Any solutions?

Bricked J500M Any solution PC no recognize

Hi, my j500m is bricked because Install the firmware combination to eliminate the frp of the device at the end of the procedure, I proceeded to install the rom stock, in the middle of the installation (partition system) it is hung I left it for a long time and the same, and it happened to me with all the rom stock that download, in the end I searched and decided to install the rom with 4 recovery files and the pit file (BL, AP, CP, CSC and PIT file) when starting odin generated an error in the pit file the phone instead of now restarting in download mode as before I did it, now turn on and go directly into recovery, the computer does not recognize it in any way now and I cannot recover how it would solve this problem
kiomet said:
Hi, my j500m is bricked because Install the firmware combination to eliminate the frp of the device at the end of the procedure, I proceeded to install the rom stock, in the middle of the installation (partition system) it is hung I left it for a long time and the same, and it happened to me with all the rom stock that download, in the end I searched and decided to install the rom with 4 recovery files and the pit file (BL, AP, CP, CSC and PIT file) when starting odin generated an error in the pit file the phone instead of now restarting in download mode as before I did it, now turn on and go directly into recovery, the computer does not recognize it in any way now and I cannot recover how it would solve this problem
Click to expand...
Click to collapse
Doe's your phone go into download mode, if yes try to uninstall Samsung drivers and install them again and try again with another USB cable
Mscreams said:
Doe's your phone go into download mode, if yes try to uninstall Samsung drivers and install them again and try again with another USB cable
Click to expand...
Click to collapse
the drivers is not problem and i use 3 USB
kiomet said:
the drivers is not problem and i use 3 USB
Click to expand...
Click to collapse
Try to use 2 USB

Samsung galaxy tab a "secure check fail" HELPPPPPP!!!

Man i did it again i flashed the wrong recovery and put my tab a into "secure check fail" I don't know if it's considered a soft brick or hard one. I've repaired it once before with a binary root tool but I've lost that tool since then. CAN ANYONE HELP?
download an Odin Firmware 4 ya Device, and extract the the "recovery.img.lz4" from the AP File, then download "ZArchiver 4 Mobile" and extract the "recovery.img.lz4" to "recovery.img" now use 7zip to Archive de "recovery.img" to "recovery.img.tar" and start Odin and select this file to "AP" and flash it!!!
it would fix your problem

Categories

Resources