Errors tring to install latest OTA - Verizon HTC 10 Questions & Answers

Unlocked version on Verizon RUU s-offed and unlocked, when I try to update I get about 27% and get a status 7 error and 410 error code after reboot. I have tried a factory reset no luck same error my cid is set to 1111111 and my mid is 2PS650000. I have reverted back to the current unlocked RUU with the modified Verizon radio any thoughts? Have not tried the Verizon CID would that make a difference.

johnc0865 said:
Unlocked version on Verizon RUU s-offed and unlocked, when I try to update I get about 27% and get a status 7 error and 410 error code after reboot. I have tried a factory reset no luck same error my cid is set to 1111111 and my mid is 2PS650000. I have reverted back to the current unlocked RUU with the modified Verizon radio any thoughts? Have not tried the Verizon CID would that make a difference.
Click to expand...
Click to collapse
You can't flash the ota with anything modified. Flash the ruu. Then accept the ota.
Sent from my HTC6545LVW using Tapatalk

factory reset with the stock recovery

afuller42 said:
factory reset with the stock recovery
Click to expand...
Click to collapse
If he's on the unlocked ruu he can't get the Verizon ota even with a factory reset. He will need to flash the ruu by itself (no other mods or root or twrp) and then take the Verizon ota.
Sent from my HTC6545LVW using Tapatalk

dottat said:
If he's on the unlocked ruu he can't get the Verizon ota even with a factory reset. He will need to flash the ruu by itself (no other mods or root or twrp) and then take the Verizon ota.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
ok I guess I'm confused, from I read hes using a unlocked version HTC 10 with the Verizon RUU.

afuller42 said:
ok I guess I'm confused, from I read hes using a unlocked version HTC 10 with the Verizon RUU.
Click to expand...
Click to collapse
Yes. He was likely rooted or had tripped a modification flag. Ota failed so he flashed the unlocked ruu.
Sent from my HTC6545LVW using Tapatalk

Thanks dottat, it was the cid changed to VZW__001 and the system updated.

johnc0865 said:
Thanks dottat, it was the cid changed to VZW__001 and the system updated.
Click to expand...
Click to collapse
Set your cid to 22222222 and forget about it forever.
Sent from my SM-T810 using Tapatalk

Related

[RUU] Rooted release stock ruu (For those reverting from leak)

For those wanting to revert from the leaked RUU, you can use this.
http://www.multiupload.com/Y9LP6S6WSP
Firmware: 1.12.605.6
Radio: 1.16.00.0223
31478f109a56be3eb7068d97a7e9b11b PG05IMG_stock.zip
Check md5sum, rename as PG05IMG.zip and flash through the bootloader.
You will keep s-off, root, update to newest (as of today) clockwork recovery and restore the rest to factory settings. Will wipe your phone.
Some people are reporting random reboots on the newest leak RUU, so it may be a trade of. Better battery, or less random reboots.
Thanks Jcase, been looking for this.
Sent from my ADR6400L using XDA Premium App
Reply
I'm not rooted and want to stay that way. If I use this to revert to the original stock thunderbolt Rom will it be a stock unrooted version? And do I flash this like I flashed the unrooted RUU? If that isn't he case could you post a RUU that would be unrooted and signed so I can flash it. I woils appreciate this a lot
Thank you! I had my nandroid backup, but this is peace of mind.
Just to be clear, flashing this (from recovery, right?) will downgrade the radio and reinstall stock ROM but keep root?
Curious, if I flash an older back up in CWM with the older radio, does this replace the new radio, or must I still reflash the old radio?
stevessvt said:
Curious, if I flash an older back up in CWM with the older radio, does this replace the new radio, or must I still reflash the old radio?
Click to expand...
Click to collapse
CWM does not back up the radio.
Noob question here. How do i check md5sum?
oldnavyguy said:
I'm not rooted and want to stay that way. If I use this to revert to the original stock thunderbolt Rom will it be a stock unrooted version? And do I flash this like I flashed the unrooted RUU? If that isn't he case could you post a RUU that would be unrooted and signed so I can flash it. I woils appreciate this a lot
Click to expand...
Click to collapse
if you are unrooted, then this rom is not for you I believe, you need original signed version of this rom that is somewhere in this forum. You need the 605.6 ruu that is signed and untouched. To flash this you have to have s-off already and be rooted as far as I know.
There is a obligatory radio thread that has just the older radio if you just wanna go back to the radio. But the RUU you flash in bootloader is the total package radio+software.
Dxun said:
Noob question here. How do i check md5sum?
Click to expand...
Click to collapse
Download Hash Droid from the Market. It will allow you to check the md5sum on your phone.
Been waiting for this. Good to have on hand. Thanks.
Sent by the Tbolt
Magnus_CA said:
Download Hash Droid from the Market. It will allow you to check the md5sum on your phone.
Click to expand...
Click to collapse
Thank you.
Sent from my ADR6400L using XDA Premium App
nkd said:
if you are unrooted, then this rom is not for you I believe, you need original signed version of this rom that is somewhere in this forum. You need the 605.6 ruu that is signed and untouched. To flash this you have to have s-off already and be rooted as far as I know.
There is a obligatory radio thread that has just the older radio if you just wanna go back to the radio. But the RUU you flash in bootloader is the total package radio+software.
Click to expand...
Click to collapse
So, I have the original signed ruu... .but can't use it to revert, I get:
"Main version is older!
Update Fail!
Press <POWER> to reboot."
How do I get around this and go back to stock for an unrooted phone?
Will this put hboot back on my phone?
<double post>
grooves12 said:
So, I have the original signed ruu... .but can't use it to revert, I get:
"Main version is older!
Update Fail!
Press <POWER> to reboot."
How do I get around this and go back to stock for an unrooted phone?
Click to expand...
Click to collapse
I used the PG05IMG downgrade used in the rooting process and then flashed the stock PG05IMG and it brought me back to stock with no prob.
davezaff said:
I used the PG05IMG downgrade used in the rooting process and then flashed the stock PG05IMG and it brought me back to stock with no prob.
Click to expand...
Click to collapse
Were you rooted before the leak?
did you use hboot to go back?
No and yes
Sent from my ADR6400L using XDA Premium App
Would you please post links to both of the files you used and an explanation of how you did it in detail as well. Thanks ahead of time
Sent from my ADR6400L using XDA Premium App
oldnavyguy said:
Would you please post links to both of the files you used and an explanation of how you did it in detail as well. Thanks ahead of time
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Download the downgrade.zip here:
http://www.multiupload.com/EH2U0B1JYG
Download the original RUU here:
http://www.multiupload.com/JWLPZAS15T
Rename and flash the downgrade (PG05IMG) in hboot wait for homescreen to load skip setup. Delete Downgrade.zip and place stock RUU on SD and rename to PG05IMG.flash in Hboot and back to stock.
I am not responsible for you bricking your phone.
Thanks for your help
Sent from my ADR6400L using XDA Premium App

XT1068 RETLA (Latin America) Lollipop OTA?

Hey,
Has anybody with an XT1068 from Latin America (non-Brazil) received the Lollipop update yet? It seems like all the other models have got an OTA except for this one Here is the current software version on my phone:
21.11.23.titan_retla_ds.retla.en.01 retla
KXB21.85-23
Any idea if perhaps I can convert my phone to a global or UK model (without screwing up the radios!).
Cheers,
Su
Sumanji said:
Hey,
Has anybody with an XT1068 from Latin America (non-Brazil) received the Lollipop update yet? It seems like all the other models have got an OTA except for this one Here is the current software version on my phone:
21.11.23.titan_retla_ds.retla.en.01 retla
KXB21.85-23
Any idea if perhaps I can convert my phone to a global or UK model (without screwing up the radios!).
Cheers,
Su
Click to expand...
Click to collapse
Hi, I only know this http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
I'm using it and works fine
luisjoseb said:
I'm using it and works fine
Click to expand...
Click to collapse
Hey,
I tried flashing this but I am getting the error, "hab check failed for boot", "hab check failed for recovery" etc. when I try to flash these files - did you have any similar problem?
Thanks,
Su
Sumanji said:
Hey,
I tried flashing this but I am getting the error, "hab check failed for boot", "hab check failed for recovery" etc. when I try to flash these files - did you have any similar problem?
Thanks,
Su
Click to expand...
Click to collapse
You need unlocked bootloader.
I forgot mention that you need to flash the Brazil radio to detect the SIMS.
I perfer to use this http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612, the feb 25 firmware and brazil modem.
luisjoseb said:
I forgot mention that you need to flash the Brazil radio to detect the SIMS.
Click to expand...
Click to collapse
Is it possible to just use the Brazilian ROM?
Sumanji said:
Is it possible to just use the Brazilian ROM?
Click to expand...
Click to collapse
Yes offcourse, but you in your first post ask for a ROM not related with Brazil
You can install the titan prime rom, is builded for all moto g variants, you gonna be good in signal and network
1.-Unlock you bootloader
2.-install TWRP 2.8.6.0
3.-flash the titan prime ROM
4.- enjoy
Sent from my XT1063/64 using XDA Free mobile app
luisjoseb said:
You need unlocked bootloader.
Click to expand...
Click to collapse
With the LP ROM, are you able to re-lock the bootloader?
You can relock but you´ll never get the state of "locked bootloader" again.There are three options:
1) Bootloader locked (and never been unlocked)
2)Bootloader unlocked
3)Bootloader locked (after unlocking)
So you won´t get back your warranty and there is no expedient reason to relock bootloader again.
Wolfcity said:
You can relock but you´ll never get the state of "locked bootloader" again.
Click to expand...
Click to collapse
Hey,
The problem I am now having is that when I relock the bootloader (so it goes to Status Code 2), the phone won't boot up any more! I get the error message "failed to validate system image".
Cheers,
Su
Here is another user with that problem:
http://forum.xda-developers.com/moto-g-2014/help/urgent-moto-g-2nd-gen-xt-1068-failed-to-t3055547
The best would be to unlock it again.

Moto e 2015 toolkit [3.0] =

Currently updating thread.....
Version 2 is out! Let me know what you think. (And if it works)
What does this do? If i had to guess, i would say it has to do something with firmware restoration. Can You Clarify?
hydroman202 said:
What does this do? If i had to guess, i would say it has to do something with firmware restoration. Can You Clarify?
Click to expand...
Click to collapse
This is simply a rar file that contains 5.1 and 5.0 firmware with instructions, and TWRP/Root with instructions.
Basically a newbie guide sorta thing.
Done uploading, you can test it now, if you want.
Gimzie said:
This is simply a rar file that contains 5.1 and 5.0 firmware with instructions, and TWRP/Root with instructions.
Basically a newbie guide sorta thing.
Done uploading, you can test it now, if you want.
Click to expand...
Click to collapse
Would The Firmware work on sprint xt1526? I noticed it was retail version.
hydroman202 said:
Would The Firmware work on sprint xt1526? I noticed it was retail version.
Click to expand...
Click to collapse
Well, the 5.1 US retail firmware is carrier free, so I assume it would work, as long as yours is the LTE varient.
hydroman202 said:
Would The Firmware work on sprint xt1526? I noticed it was retail version.
Click to expand...
Click to collapse
Updating the toolkit with more stock roms-look in the changelog.
Would the firmware work on Verizon 1528 but with GSM ATT card in it now?
cell2011 said:
Would the firmware work on Verizon 1528 but with GSM ATT card in it now?
Click to expand...
Click to collapse
From what I know, Verizon has to be configured to work with GSM, so if you install stock, you'll have to probably configure that again. Wait for the firmware I upload today.
Sent from my KFARWI using Tapatalk
Gimzie said:
From what I know, Verizon has to be configured to work with GSM, so if you install stock, you'll have to probably configure that again. Wait for the firmware I upload today.
Sent from my KFARWI using Tapatalk
Click to expand...
Click to collapse
Ok ive done the 1527 but couldnt get into twrp maybe ill wait for 1528 since thats what i have also bootloader is locked. Couldnt i still do this or flash 1526 or 1527? I flashed 1527 firm and it still says vzw 1528 in settings but it basically factory hard reset thats all
cell2011 said:
Ok ive done the 1527 but couldnt get into twrp maybe ill wait for 1528 since thats what i have also bootloader is locked. Couldnt i still do this or flash 1526 or 1527? I flashed 1527 firm and it still says vzw 1528 in settings but it basically factory hard reset thats all
Click to expand...
Click to collapse
Strange. And doesn't Verizon have a bad record of locking bootloaders? Permanently?
Sent from my surnia using Tapatalk
Gimzie said:
Strange. And doesn't Verizon have a bad record of locking bootloaders? Permanently?
Sent from my surnia using Tapatalk
Click to expand...
Click to collapse
Yes. In fastboot im locked but i was able to flash the 5.1 1527 and i just flashed 1526 im still on xt1528. Can xt 1527 be flashed through rsd lite?
cell2011 said:
Yes
Click to expand...
Click to collapse
So I'm not sure if you can root it and install TWRP.
Sent from my surnia using Tapatalk
Gimzie said:
So I'm not sure if you can root it and install TWRP.
Sent from my surnia using Tapatalk
Click to expand...
Click to collapse
Thats ok i flashed 5.0 version 1526 boost on my 1528 vzw and it seems faster and im still on 5.1 and im on ATT sim 4g lte through the network app. It seems like boost Mobile reboost is in phone dialer contact section lol
cell2011 said:
Thats ok i flashed 5.0 version 1526 boost on my 1528 vzw and it seems faster and im still on 5.1 and im on ATT sim 4g lte through the network app. It seems like boost Mobile reboost is in phone dialer contact section lol
Click to expand...
Click to collapse
Mkay, but just to let you know, all the stock firmwares are signed, and can be flashed with a locked bootloader. TWRP is unsigned, and needs an unlocked bootloader.
Sent from my Moto E 2015 LTE running the fluffy goodness of Marshmallow.
Amazing
Being updated soon!
customize error !!!! xt1521
When i try to erase customize it fails !!!!
1>fastboot erase customize
erasing 'customize'...
(bootloader) Invalid partition name customize
FAILED (remote failure)
finished. total time: 0.015s
but my phone boots up !!! yay !!!! thanks a ton !!!!!!!!
kesavvel said:
When i try to erase customize it fails !!!!
1>fastboot erase customize
erasing 'customize'...
(bootloader) Invalid partition name customize
FAILED (remote failure)
finished. total time: 0.015s
but my phone boots up !!! yay !!!! thanks a ton !!!!!!!!
Click to expand...
Click to collapse
Don't worry, that's normal.
Gimzie said:
I AM NOT RESPONSIBLE IF SOMETHING BAD HAPPENS TO YOUR DEVICE
NOTE: AFTER A PC FORMAT, I LOST ALL THE DOWNLOADED FIRMWARES AND EVERYTHING, MAKING THIS PRETTY MUCH USELESS. THE DOWNLOAD LINK IS THERE JUST IN CASE. (AND I"LL DOWNLOAD IT MYSELF LATER)
This is a simple mini toolkit that contains:
Both 5.0 and 5.1 firmware, with instructions
TWRP/Root with instructions
Many notes, that you should probably read.
DOWNLOADS
Version 2.0
CHANGELOG​
Code:
[COLOR=Black][SIZE=4]v3.0 - Added OTUS firmware for XT1505, XT1506, and XT1511[/SIZE][/COLOR]
[COLOR=Black][SIZE=4]Renamed thread xD[/SIZE][/COLOR]
[COLOR=Black][SIZE=4]Replaced 5.0 firmware for XT1527[/SIZE][/COLOR]
[COLOR=Black][SIZE=4]Added firmware for XT1523, XT1514, XT1528, and XT1529 [/SIZE][/COLOR]
[COLOR=Black][SIZE=4]Added root and TWRP for OTUS[/SIZE][/COLOR]
______________________________________________________________
[COLOR=Black][SIZE=4]v2.0 - Added 5.0 and 5.1/5.1.1 firmware for XT1521, XT1526 and XT1524[/SIZE][/COLOR]
[COLOR=Black][SIZE=4]Changed some directories[/SIZE][/COLOR]
[COLOR=Black][SIZE=4]Added note about apns, if you don't know[/SIZE][/COLOR]
______________________________________________________________
[COLOR=Black][SIZE=4]v1.0 - Added 5.0 and 5.1 firmware[/SIZE][/COLOR]
[COLOR=Black][SIZE=4]Added TWRP and root method[/SIZE][/COLOR]
[COLOR=Black][SIZE=4]Initial Release[/SIZE][/COLOR]
PLEASE POST ANY ISSUES BELOW
IF fastboot flash fsg fsg.mbn, fastboot flash partition gpt.bin, and fastboot flash bootloader bootloader.img fail, you flashed the wrong model.
Click to expand...
Click to collapse
I need some help. I am trying to restore my Moto E XT1528 (VZW) back to stock but following this guys tutorial, I am getting a gpt.bin error. Anyways, I wanted to use your tool, where is version 3.0?

Yes, you can downgrade APG1 to APD8!!!!!

First, flash ENG boot in the AP. Then, go back immediately and flash the CSC CP and AP of the ROM of your choice. Simple, easy, DOWNGRADE COMPLETE!!!
lincolnsxda said:
First, flash ENG boot in the AP. Then, go back immediately and flash the CSC CP and AP of the ROM of your choice. Simple, easy, DOWNGRADE COMPLETE!!!
Click to expand...
Click to collapse
Wait, so if I'm on bootloader v3, will this let me flash U firmware which is on bootloader v2? Can someone confirm?
Sent from my SM-G935T using Tapatalk
nahtnam said:
Wait, so if I'm on bootloader v3, will this let me flash U firmware which is on bootloader v2? Can someone confirm?
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
when some one tests this can they please do a video to prove if it works, also can we flash CSC that does not factory wipe the phone. also I don't remember for sure but isn't the U firmware bootloader 2 the international version with the unlocked bootloader?
I wanted to know you you could wip up a quick tutorial or steps for us . I can tell its really simple and easy. but once we unzip the firmware wont it then lose the md5 has and signature. of are the 5 files inside also signed.
goofwear said:
when some one tests this can they please do a video to prove if it works, also can we flash CSC that does not factory wipe the phone. also I don't remember for sure but isn't the U firmware bootloader 2 the international version with the unlocked bootloader?
Click to expand...
Click to collapse
Yep, if this works then the OP is a genius who's name will live on in the T-Mobile s7 edge forum. People will be able to flash the U firmware again. Can someone also verify that knox doesn't get tripped?
Sent from my SM-G935T using Tapatalk
nahtnam said:
Wait, so if I'm on bootloader v3, will this let me flash U firmware which is on bootloader v2? Can someone confirm?
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
nahtnam said:
Yep, if this works then the OP is a genius who's name will live on in the T-Mobile s7 edge forum. People will be able to flash the U firmware again. Can someone also verify that knox doesn't get tripped?
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
Since they are all official and signed files I would assume that this would not trip knox. But I can not verify for sure. Also I thought knox checks to see if the boot loader is unlocked.
I have another question. with an unlocked boot loader don't we still have the problem of dm-verity being enabled that would stop use form flashing mods and roms.
goofwear said:
Since they are all official and signed files I would assume that this would not trip knox. But I can not verify for sure. Also I thought knox checks to see if the boot loader is unlocked.
I have another question. with an unlocked boot loader don't we still have the problem of dm-verity being enabled that would stop use form flashing mods and roms.
Click to expand...
Click to collapse
The main thing that *most* people want is the U firmware. Also, I'm not really sure exactly what knox does other than to not trip it.
Sent from my SM-G935T using Tapatalk
If this works, this would be amazing. I don't want root, I don't want to even unlock my bootloader, I just want to put the U firmware on my T-Mobile S7.
Not to get off topic but what's the big deal about the u firmware is it Universal or is it unbranded with a lot less bloat. Or additional features?
goofwear said:
Not to get off topic but what's the big deal about the u firmware is it Universal or is it unbranded with a lot less bloat. Or additional features?
Click to expand...
Click to collapse
It is unbranded, let's you uninstall bloat apps completely, and unlocks most us bands.
Sent from my SM-G935T using Tapatalk
lincolnsxda said:
First, flash ENG boot in the AP. Then, go back immediately and flash the CSC CP and AP of the ROM of your choice. Simple, easy, DOWNGRADE COMPLETE!!!
Click to expand...
Click to collapse
Have you successfully done this and does that not mean that downgraded bootloader is also unlocked. Or that we could flash another models bootloader to to the s7 edge
Maybe we been trolled?
crashnova said:
Maybe we been trolled?
Click to expand...
Click to collapse
I just PMed the OP asking for more information. In the meantime, anyone ballsy enough to try?
Sent from my SM-G935T using Tapatalk
"Yes, you can downgrade APG1 to APD8!!!!!" pd8 i guess is bootloader v3. if he downgrade to bp8,this thread thread will be on fire!!!
I'm pretty sure pd8 is v3 bootloader also. Shouldn't be any issues downgrading pg1 to pd8 regularly, both same version bl.
crashnova said:
Maybe we been trolled?
Click to expand...
Click to collapse
We better not have been, I'm immensely pissed that this is even an issue in the first place.
Akira Takamedo said:
We better not have been, I'm immensely pissed that this is even an issue in the first place.
Click to expand...
Click to collapse
Tell me about it. I got my s7e yesterday. I'm pissed I took the Ota.
This tread here says we cant do it http://forum.xda-developers.com/tmobile-s7-edge/help/downgrade-apg1-to-pd8-t3429642
but maybe op in our tread found a way @lincolnsxda
So guys, I've goy APD8 and have downloaded the update but haven't installed. Is there any way I can delete the update file, it's taking up space. Also why is the new updste so bad?
Sent from my SM-G935T using XDA-Developers mobile app
I'll be happy to try on the next couple days, but I'm having a hard time finding a good link to the U firmware that doesn't require payment. Anyone have a link?
ike_1985 said:
So guys, I've goy APD8 and have downloaded the update but haven't installed. Is there any way I can delete the update file, it's taking up space. Also why is the new updste so bad?
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
It is not bad, but comes with a later bootloader which can limit some options.

PPWS29.116-11-13 update failed to install

The most recent update PPWS29.116-11-13 has OTA downloaded, but failed to install (even after factory reset). All previous updates had always installed without any problem.
I have XT1926-7 "Evert" (from Amazon) with unlocked BL, but otherwise stock un-rooted, unmodified PPWS29.116-11-11.
Could unlocked BL be a reason?
The unlocked BL can't be the reason for this. Try flash the 116-11-11 FW and just boot your device without any changes. Then you will be able to install the update.
WoKoschekk said:
flash the 116-11-11 FW
Click to expand...
Click to collapse
Why? Wha's the rationale here? It's already 116-11-11
rybshik said:
Why? Wha's the rationale here? It's already 116-11-11
Click to expand...
Click to collapse
Moto OTA update s have been failing for many model s
Seems like the only solution is to reflash the current version of firmware that phone and try OTA again
Or see is new version is posted on
https://mirrors.lolinet.com/firmware/moto
Just download the correct software channel version.
Flash with Rsd lite or fastboot.exe
Sent from my mata using XDA Labs
sd_shadow said:
reflash the current version of firmware that phone....
https://mirrors.lolinet.com/firmware/moto
Click to expand...
Click to collapse
Will EVERT_RETAIL_9.0_PPWS29.116-11-11 be good for AT&T and T-mobile frequency bands?
I do not care too much about LTE though
sd_shadow said:
Seems like the only solution is to reflash the current version of firmware that phone and try OTA again
Click to expand...
Click to collapse
I flashed "EVERT_RETAIL_9.0_PPWS29.116-11-11" with fastboot and then device OTA updated to PPWS29.116-11-13.
It works OK.
However, if go to System updates, I get the following:
System integrity is compromised
Android version: 9
Current version: PPWS29.116-11-13
Security patch: November 1, 2019
As your device system integrity is compromised is compromised, it is no longer eligible for software updates
Click to expand...
Click to collapse
So I am wondering if it might be because of (possibly) incorrect software channel? My original device software channel was and still is "retla".
Or because of the unlocked BL?
I have not made any other FW modifications nor did I root
rybshik said:
I flashed "EVERT_RETAIL_9.0_PPWS29.116-11-11" with fastboot and then device OTA updated to PPWS29.116-11-13.
It works OK.
However, if go to System updates, I get the following:
So I am wondering if it might be because of (possibly) incorrect software channel? My original device software channel was and still is "LA".
Or because of the unlocked BL?
I have not made any other FW modifications nor did I root
Click to expand...
Click to collapse
I'm not sure.
Someone else posted same warning, that had unlocked bootloader.
It's not a normal warning.
Sent from my Cosmo_Communicator using XDA Labs
sd_shadow said:
Someone else posted same warning, that had unlocked bootloader.
Click to expand...
Click to collapse
so folks need to be careful when updating to PPWS29.116-11-13
rybshik said:
I flashed "EVERT_RETAIL_9.0_PPWS29.116-11-11" with fastboot and then device OTA updated to PPWS29.116-11-13.
It works OK.
However, if go to System updates, I get the following:
So I am wondering if it might be because of (possibly) incorrect software channel? My original device software channel was and still is "retla".
Or because of the unlocked BL?
I have not made any other FW modifications nor did I root
Click to expand...
Click to collapse
Install Magisk and this message will disappear.
This a normal warning screen caused by a corrupted AVB due to your unlocked bootloader. Magisk will fix it by the AVB 2.0/dm-verity option.
WoKoschekk said:
This a normal warning screen caused by a corrupted AVB due to your unlocked bootloader..
Click to expand...
Click to collapse
Yet, there is no such warning with earlier FW versions, for example, PPWS29.116-11-11
rybshik said:
Yet, there is no such warning with earlier FW versions, for example, PPWS29.116-11-11
Click to expand...
Click to collapse
Yes, there is. Everytime I flashed a new FW and Magisk wasn't installed the system showed me this warning. As soon as Magisk is installed this error will disappear. Just try it.
Since the moto g6 plus was updated to Pie you got this error.
rybshik said:
Yet, there is no such warning with earlier FW versions, for example, PPWS29.116-11-11
Click to expand...
Click to collapse
Yes I think this is a new thing.
Sent from my mata using XDA Labs

Resources