Hi to everyone!!!
I saw that many of you are having issues about the installation of the Vodafone-branded OS. If you want to install it very easily and fast, just follow this guide! You can follow this guide to install any branded OS to your G920F ONLY
WARNING: This procedure will delete all of data, however it wont trip KNOX
1. Download the Vodafone branded OS (here mirror not mine)
2. Download this pit file if your phone is the G920F ONLY
3. Open Odin and put the pit that we downloaded in the pit section and the firmware in the AP selection.
4. Start flashing
5. Voila. It is recommended to wipe the data and cache after flashing the OS to ensure the best performance out of it.
That's it. This pit file is made from @yakapa40 and make sure you press the "Thanks" button to him too.
Don't forget to press the "Thanks" button to me to for letting you know about this trick. I have tested and it works like charm!!!
No extra help will be given from me
Thanks for this PIT file, and if we want to go back to the original pit file do you know where we can find it ?
My version goes like this
1. Unpack G920FXXU3DPB8+Service+firmware.zip (Link)
2. Put the files where they say they should go (AP = AP / BL = BL ect)
3. Press Start
4. Done
This wipes you're storage so backup beforehand!
EDIT: Not sure if this trips KNOX, it shouldn't as its official firmware, but I cannot tell you as I already had KNOX tripped from the beta
Kagath said:
Thanks for this PIT file, and if we want to go back to the original pit file do you know where we can find it ?
Click to expand...
Click to collapse
From the same guy that I got the modified pit, you can get the original pit too
roughavoc said:
My version goes like this
1. Unpack G920FXXU3DPB8+Service+firmware.zip (Link)
2. Put the files where they say they should go (AP = AP / BL = BL ect)
3. Press Start
4. Done
This wipes you're storage so backup beforehand!
EDIT: Not sure if this trips KNOX, it shouldn't as its official firmware, but I cannot tell you as I already had KNOX tripped from the beta
Click to expand...
Click to collapse
You're right, this wipes all of your data.
But it wont void the KNOX counter
Kagath said:
Thanks for this PIT file, and if we want to go back to the original pit file do you know where we can find it ?
Click to expand...
Click to collapse
hello
for other SM-SM920 pit files you can take a look here:
http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459
http://www.sammobile.com/forum/showthread.php?t=30173
regards
anyone tests this way??
how can i wipe data on my s6?
---------- Post added at 10:06 PM ---------- Previous post was at 09:57 PM ----------
mostafa-km said:
anyone tests this way??
Click to expand...
Click to collapse
All working!
Does the method in OP wipe storage? I'm on 3UK (H3G) will it trip Knox?
Sent from my SM-G920F using XDA Premium 4 mobile app
match_stick said:
Does the method in OP wipe storage? I'm on 3UK (H3G) will it trip Knox?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No it won't trip knox. However it will delete all of your data
Does it have the Vodafone logo on boot?
Sent from my SM-G920F using XDA Premium 4 mobile app
I flashed like this:
Unpacked the firmware, removed hidden.img repacked using unified android toolkit
and flashed
RESULT=
I didn't lost my data
---------- Post added at 23:55 ---------- Previous post was at 23:51 ----------
match_stick said:
Does it have the Vodafone logo on boot?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No
t-shock said:
From the same guy that I got the modified pit, you can get the original pit too
Click to expand...
Click to collapse
CAN YOU SHOW THE LINK FOR ORIGINAL PIT?
I FLASHED SCS: VOD + PIT AND NOW I HAVE CSC "SIM" (Slovenia)
HOW IT POSSIBLE?
thanks
strazi said:
CAN YOU SHOW THE LINK FOR ORIGINAL PIT?
I FLASHED SCS: VOD + PIT AND NOW I HAVE CSC "SIM" (Slovenia)
HOW IT POSSIBLE?
thanks
Click to expand...
Click to collapse
It is not harmful to the SIM(Slovenia). It is operating normally. The only restart 10 minutes.
Work normally. I updated by the method as described above. Data is not deleted if you do not want. Root disappears.
Guys, how about Voice Quality?
We have new modem...
Guys one question i used this pit to flash from BTU to ORO firmware , then i did factory reset and flashed Xef without this pit and again did factory reset so i got csc from xef active...After doing ota 6.0.1 i again did factory reset so now everything is clean i dont have root or knox 0x1...My question is do i have to flash some kind of original pit from 6.0.1 xef or i am good to go like this ?? Thx
Sent from my SM-G920F using Tapatalk
I downloaded the PIT And FW and followed the OP's instructions, worked perfectly. My question is, With tha new security update a while ago, where you can't downgrade your Android OS version. Now that I am on the 6.0.1 from the OPs post, am I able to revert back to my original PIT and Android 5.1.1?
If so, how do I know what PIT is my original one, and to reflash it do I need to follow the OPs instructions, only changing the PIT used and FW used? Any help would be greatly appreciated.
Forgot to say, I am on the Meteor Network, in Ireland.
Thank you! Running 6.0.1...Couldn't wait any longer! I'm on 3UK
Sent from my SM-G920F using XDA Premium 4 mobile app
LordVader1991 said:
I downloaded the PIT And FW and followed the OP's instructions, worked perfectly. My question is, With tha new security update a while ago, where you can't downgrade your Android OS version. Now that I am on the 6.0.1 from the OPs post, am I able to revert back to my original PIT and Android 5.1.1?
If so, how do I know what PIT is my original one, and to reflash it do I need to follow the OPs instructions, only changing the PIT used and FW used? Any help would be greatly appreciated.
Forgot to say, I am on the Meteor Network, in Ireland.
Click to expand...
Click to collapse
Hello everyone, sorry once again to bother you all, but does anyone have any help on this matter?
Frequent reboot after installing 6.0.1 to Samsung S6
After updating to Marshmallow, my S6 is rebooting very frequently. Please help.
t-shock said:
From the same guy that I got the modified pit, you can get the original pit too
You're right, this wipes all of your data.
But it wont void the KNOX counter
Click to expand...
Click to collapse
Hi,
Just to clarify can I use this method to flash Vodafone firmware on to my O2 branded and network unlocked G920F?
Related
I have an italian note 3 with "KOT49H.N9005XXUENA6" firmware and "NA2" baseband.
Can anyone please tell me what is my region, if i am on the latest firmware version, also the update sequence (NA2>NA6>NB3>NB4) please?
And, is there any reason to update from my fw version to the latest available?
DiRT_360 said:
I have an italian note 3 with "KOT49H.N9005XXUENA6" firmware and "NA2" baseband.
Can anyone please tell me what is my region, if i am on the latest firmware version, also the update sequence (NA2>NA6>NB3>NB4) please?
And, is there any reason to update from my fw version to the latest available?
Click to expand...
Click to collapse
Use this, just read the CSC (do not change it if you do not know EXACTLY what you are doing):
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
xclub_101 said:
Use this, just read the CSC (do not change it if you do not know EXACTLY what you are doing):
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Click to expand...
Click to collapse
hi, pls i want to upgrade to the latest german kiktkat firmware, am currently on MJ4 south African vodafone, with a different csc from the german, pls how do i flash the german firmware on my phone?
topdee said:
hi, pls can i want to upgrade to the latest german kiktkat firmware, am currently on MJ4 south African vodafone, with a different csc from the german, pls how do i flash the german firmware on my phone?
Click to expand...
Click to collapse
Get the Stock ROM you want to flash, and use Odin. - Go have a read there is many guides around to help.
radicalisto said:
Get the Stock ROM you want to flash, and use Odin. - Go have a read there is many guides around to help.
Click to expand...
Click to collapse
pls can you help with a link to the thread that explains well, because i have read many people having issues due to errors when flashing to kitkat
topdee said:
pls can you help with a link to the thread that explains well, because i have read many people having issues due to errors when flashing to kitkat
Click to expand...
Click to collapse
Get Odin 1.85 -
Download The firmware, there's plenty of Kitkat links on this forum in General section, unrar it to get the .md5 file, put your phone in download mode - Power button, Volume down and home button - open Odin on your PC - plug in your phone, load the .md5 file into the PDA/AP slot of Odin and press start.
can anyone please answer my questions?
radicalisto said:
Get Odin 1.85 -
Download The firmware, there's plenty of Kitkat links on this forum in General section, unrar it to get the .md5 file, put your phone in download mode - Power button, Volume down and home button - open Odin on your PC - plug in your phone, load the .md5 file into the PDA/AP slot of Odin and press start.
Click to expand...
Click to collapse
thanks a lot
DiRT_360 said:
I have an italian note 3 with "KOT49H.N9005XXUENA6" firmware and "NA2" baseband.
Can anyone please tell me what is my region, if i am on the latest firmware version, also the update sequence (NA2>NA6>NB3>NB4) please?
And, is there any reason to update from my fw version to the latest available?
Click to expand...
Click to collapse
To know your region download app from google play “phone info", sequence looks fine.
radicalisto said:
Get Odin 1.85 -
Download The firmware, there's plenty of Kitkat links on this forum in General section, unrar it to get the .md5 file, put your phone in download mode - Power button, Volume down and home button - open Odin on your PC - plug in your phone, load the .md5 file into the PDA/AP slot of Odin and press start.
Click to expand...
Click to collapse
finally flashed the german B4 successfully, but i lost root access in the process, pls is there anyway i can regain my root access?
---------- Post added at 10:17 PM ---------- Previous post was at 09:58 PM ----------
radicalisto said:
Get Odin 1.85 -
Download The firmware, there's plenty of Kitkat links on this forum in General section, unrar it to get the .md5 file, put your phone in download mode - Power button, Volume down and home button - open Odin on your PC - plug in your phone, load the .md5 file into the PDA/AP slot of Odin and press start.
Click to expand...
Click to collapse
finally flashed the german B4 successfully, but i lost root access in the process, pls is there anyway i can regain my root access?
topdee said:
finally flashed the german B4 successfully, but i lost root access in the process, pls is there anyway i can regain my root access?
---------- Post added at 10:17 PM ---------- Previous post was at 09:58 PM ----------
finally flashed the german B4 successfully, but i lost root access in the process, pls is there anyway i can regain my root access?
Click to expand...
Click to collapse
Re-root the exact same way you did the first time - remember to use Kitkat compatible CF-Autoroot though.
radicalisto said:
Re-root the exact same way you did the first time - remember to use Kitkat compatible CF-Autoroot though.
Click to expand...
Click to collapse
sorry, but will knox be tripped?
topdee said:
sorry, but will knox be tripped?
Click to expand...
Click to collapse
Yes Knox will be 0x1
hey guys
my n9005 KSA version running on 4.3 tried to manually update to kitkat then (firmware encountered an issue )
i took it to a non official repair center and the situation now is
boot-loader version :N9005XXUENA7
baseband :N9005DTMENA2
pda :N9005XXUENA2
but i have no csc code and now my samsung keyboard and action memo not working
i want to flash ksa 4.4 rom released 10 days ago but i am afraid of soft bricking my phone again sorry am not pro can someone help please
thanks
I have same like that before. Csc is missing when I check with *#1234#
I just reflash the firmware and it is there.
But u can just flash csc shld be no problem.
If u want to upgrade to latest firmware just get it from samfirmware.com nd flash through odin pc.
Sent from somewhere under the sky, at the corner of this rounded earth.
i downloaded ksa 4.4 stock firmware but its just one file tar. with no csc?
and now am already on 4.4 leaked version i guess with no csc i posted my current 4.4 rom code on the last post so any help to convert to ksa 4.4 without bricking?
kareem300 said:
and now am already on 4.4 leaked version i guess with no csc i posted my current 4.4 rom code on the last post so any help to convert to ksa 4.4 without bricking?
Click to expand...
Click to collapse
Just flash it with odin. Yap there is only one file.
Sent from my SM-N9005 using XDA Premium 4 mobile app
kareem300 said:
i downloaded ksa 4.4 stock firmware but its just one file tar. with no csc?
Click to expand...
Click to collapse
you can just try to reflash the firmware again.
Note 3 is still confusing me in a way. Certain way is working for some ppl, but not to others.
you have to bear in mind, flashing stock official rom from odin, won't brick your phone.
If possible, once ROM is completed (flashing is done), try to go into recovery (stock recovery which come with the official firmware), and do a full wipe/factory reset and wipe cache.
This full wipe seems to be the best way to avoid any error/problem.
So can you post your download mode snapshot to verify both applied CSC and knox warranty
for my seek
I've been told that flashing another Region firmware or changing CSC Could Trigger Knox Warranty please verify That By screenshot mention your old ROM Build Number Thank you
Sent from my SM-N9005 using Tapatalk
msasm09 said:
So can you post your download mode snapshot to verify both applied CSC and knox warranty
for my seek
I've been told that flashing another Region firmware or changing CSC Could Trigger Knox Warranty please verify That By screenshot mention your old ROM Build Number Thank you
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
i have no csc code on *#1234# thats only ap:n9005xxuena7
cp:n9005xxuena2
with no csc but at kies or phone info apk theres no csc code but original csc is KSA
Ok So please Post Download Made Screenshot
Sent from my SM-N9005 using Tapatalk
---------- Post added at 06:02 PM ---------- Previous post was at 06:01 PM ----------
I think It well show Which csc applied
Sent from my SM-N9005 using Tapatalk
Hi community!
First time posting.
So, my SM-G900I (shipped from Taiwan to Aus) recently started bootlooping so i decided to reflash a stock rom. I initially flashed an XSU version of the G900I stock and then a BRI version of stock. This didnt remove the bootloop. I then installed TWRP and cleared all the necessary caches, formatted data and everything else. still in bootloop.
I installed CM13 in TWRP install menu and it still didnt boot. I've also tried pulling the battery for extended periods of time. I dabbled in terminal commands but it was all a bit above me!
is there anything else i can do or is the phone dead? it can still enter download mode and TWRP. is this a battery problem? in TWRP the battery says it's 80% charged so it seems to hold charge.
Thanks for your help.
Cheers.
Did you try flashing the stock rom and PIT file with ODIN?
EzStyles said:
Did you try flashing the stock rom and PIT file with ODIN?
Click to expand...
Click to collapse
I did. 16GB G900I pit file was flashed alongside BL, AP, CP, and CSC files (got directly from Kies).
I am able to install a custom recovery and access those menus but i can't get in to the stock recovery menu.
haydonny said:
I did. 16GB G900I pit file was flashed alongside BL, AP, CP, and CSC files (got directly from Kies).
I am able to install a custom recovery and access those menus but i can't get in to the stock recovery menu.
Click to expand...
Click to collapse
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Hi!
Thanks for the quick response but there are none there for G900I models. Just a question, how do these differ from manually putting in pit, AP, BL, CP and CSC seperately?
cheers.
waheem said:
You need a repair firmware find here ....URL HERE.. flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
Forgot to quote
You made a wipe of System, Data, Cache and Dalvik cache? If yes you tried Wipe Internal Storage too?
haydonny said:
Hi!
Thanks for the quick response but there are none there for G900I models. Just a question, how do these differ from manually putting in pit, AP, BL, CP and CSC seperately?
cheers.
Click to expand...
Click to collapse
AP = Android Platform
BL = Bootloader
CP = Modem (radio)
CSC = Region & Network operator
PIT = Partition table
Lunch Odin tick ap and select pda' ap' code acoding your downloaded firmware tick BL select bootloder
Tick cp and select modem
Tick csc select csc
Tick pit and select pit
Start
A bad pit can bricked your phone and bootloops
waheem said:
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
haydonny said:
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Click to expand...
Click to collapse
You can update back to lollipop phone server
waheem said:
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
You can update back to lollipop phone server
Click to expand...
Click to collapse
Just trying to update but the phone isnt saying it's connected to the computer post-flash. It isnt charging. Also updates thorugh the phone are saying 4.4.2 is the most up to date?
waheem said:
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
You can update back to lollipop phone server
Click to expand...
Click to collapse
Just trying to update but the phone isnt saying it's connected to the computer post-flash. It isnt charging. Also updates thorugh the phone are saying 4.4.2 is the most up to date?
Download update to samfirmwar it is 1 package file home tar md5 put on PDA and flash make sure download correct firmware of your country region
best way : download samsung kies, go to download mode on your phone, connect it to pc, open samsung kies, go to tools->firmware update settings, this will update your phone to latest firmware fixing any software related problem. after that you can root and flash any custom rom.
Gratz
haydonny said:
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Click to expand...
Click to collapse
Hi man, Congratz. I'd like to know which version did you download? Because I also have Taiwan version but is not in the list, just India and Australia options.
Thanks for your help.
waheem said:
You need a repair firmware find here <URL here> flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
Hi, I'd like to know which version should I download? Because I have Taiwan version but is not in the list, just India and Australia options.
Thanks for your help.
waheem said:
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
hello bro,can you help me......mine same problem Samsung s5 G900I stuck at bootloop,tried so many but still can't fix it....can you send me the link given above so I can try mine also
jarokku said:
hello bro,can you help me......mine same problem Samsung s5 G900I stuck at bootloop,tried so many but still can't fix it....can you send me the link given above so I can try mine also
Click to expand...
Click to collapse
pls someone help me
Hey what's up xda! Here is the a full Odin tar files from This will completely restore from any issues that you might have with your device or you want just want to restore for any reason ....
**Make sure you add each file to its correct area**
AP_G930TUVS2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G930TUVS2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930TUVS2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G930TTMB2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G930TTMB2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
https://www.dropbox.com/s/n4gwwo1seuhgem7/G930TUVS2APB8_Recovery.rar?dl=0
JUSMEJOSE said:
Hey what's up xda! Here is the a full Odin tar files from This will completely restore from any issues that you might have with your device or you want just want to restore for any reason ....
**Make sure you add each file to its correct area**
AP_G930TUVS2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G930TUVS2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930TUVS2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G930TTMB2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G930TTMB2APB8_CL7103056_QB8899147_REV02_user_low_ship_MULTI_CERT.tar.md5
https://www.dropbox.com/s/404vyu6n7chrd4v/G930TUVS2APB8_Recovery.zip?dl=0
Click to expand...
Click to collapse
Link doesn't work?
mikeyinid said:
Link doesn't work?
Click to expand...
Click to collapse
Should be up in couple of minutes ...
you title says G930TUVU1APB6 this is PB8
Where is the home_csc file supposed to be flashed on odin? It only has 4 slots ap bl cp csc
I'm on APD8 is that the latest update? Thanks
Sent from my SM-G930T using XDA-Developers mobile app
eltonycz said:
Where is the home_csc file supposed to be flashed on odin? It only has 4 slots ap bl cp csc
Click to expand...
Click to collapse
ditto!
My Sprint phone was rooted and then one day got stuck in a boot loop, but I hate the Sprint bloatware so I downloaded the T-Mobile stock rom and odined it. I left out the home_csc file because I didn't know where to put it and it seems to be working just great.
xda23 said:
I'm on APD8 is that the latest update? Thanks
Click to expand...
Click to collapse
PG1 is the latest ... PD8 is the second to last latest firmware
came in here to do a full Odin restore (as the tittle says ) but no link to PG1 files so here it is to ayone looking for the link https://www.androidfilehost.com/?fid=24572369242688258
what odin used
squirrel323 said:
came in here to do a full Odin restore (as the tittle says ) but no link to PG1 files so here it is to ayone looking for the link https://www.androidfilehost.com/?fid=24572369242688258
Click to expand...
Click to collapse
what odin used ?
This is my first ever attempt at this so I cannot guarantee this will not damage your phone or destroy the housing market.
I bought this phone on a trip in China expecting to have a plentiful selection of roms on my return to Canada, only to be met with zero roms, and the only information on Chinese forums.
Having been inspired by the Aurora Rom, I decided to try and build something more compatible with North America
This is based off the latest Hong Kong (INT) firmware G9350ZHS2APH2
So far I have not learned how to properly build a standalone rom (flashable zip) so here is a 100% working guide for now. I will post the zip once I have figured that out
This was only tested on a Chinese G9350 Qualcomm S7Edge. Please don't attempt on any other model
Backup your phone!
Make sure your bootloader is unlocked!
Install Samsung USB Drivers
If you already have TWRP, and are having problems mounting data, boot into recovery and Format Data. If you want TWRP first, flash the TAR G9350.TWRP.3.0-321.tar
Boot into download mode
Launch the modified Odin
Load all the corresponding files. (BL, CP, CSC, and the AP file) Only the AP is required, the rest is optional.
Click the bottom left button to start the flashing process.
Reboot back into download mode
Flash the AP TAR (G9350.TWRP.SuperSU.tar) This will flash TWRP, then boot into recovery and flash root
You should now have a rooted, International speedy rom with working recovery
There is no extra bloatware in this rom, however I recommend using TiBu or Package disabler to remove the TouchWiz bloat.
Samsung USB Drivers
Modified Odin
TWRP & SuperSU Root
Data Encryption disabler - Updated 2.1
Odin AP/PDA Firmware file
Odin BL
Odin CP
Odin CSC
Thank you to all the devs on the Chinese forums http://bbs.gfan.com/forum-1663-1.html, and to Android File Host for hosting my files.
Any comments or suggestions are welcome!
Awesome!
Is this going to work on the Hong Kong version s7 edge?
Sent from my SM-G9350 using Tapatalk
mlkemac said:
This is my first ever attempt at this so I cannot guarantee this will not damage your phone or destroy the housing market.
I bought this phone on a trip in China expecting to have a plentiful selection of roms on my return to Canada, only to be met with zero roms, and the only information on Chinese forums.
Having been inspired by the Aurora Rom, I decided to try and build something more compatible with North America
This is based off the latest Hong Kong (INT) firmware G9350ZHU2APG2
So far I have not learned how to properly build a standalone rom (flashable zip) so here is a 100% working guide for now. I will post the zip once I have figured that out
This was only tested on a Chinese G9350 Qualcomm S7Edge. Please don't attempt on any other model
Backup your phone!
Make sure your bootloader is unlocked!
If you already have TWRP, and are having problems mounting data, boot into recovery and Format Data. If you want TWRP first, flash the TAR G9350.TWRP.3.0-321.tar
Boot into download mode
Launch the modified Odin, it will be in Chinese *thanks to TieXue
Load all the corresponding files. (BL, CP, CSC, and the AP file G9350ZHU2APG2.mlkemac.tar) Only the AP is required, the rest is optional
Click the bottom left button to start the flashing process.
Reboot back into download mode
Flash the AP TAR (G9350.TWRP.SuperSU.2.71.tar) This will boot into recovery and flash root
You should now have a rooted, International speedy rom with working recovery
There is no extra bloatware in this rom, however I recommend using TiBu or Package disabler to remove the TouchWiz bloat.
Modified Odin
TWRP
SuperSU Root
TWRP Encryption disabler
Odin AP/PDA Firmware file
Odin BL
Odin CP
Odin CSC
Thank you to all the devs on the Chinese forums http://bbs.gfan.com/forum-1663-1.html, and to Basketbuild for hosting my files.
Any comments or suggestions are welcome!
Click to expand...
Click to collapse
Thanks mate u made my day i was really stuck with that stupid Chinese version
davecotefilm said:
Awesome!
Click to expand...
Click to collapse
Sent from my SM-G9350 using Tapatalk
mitsuji26 said:
Is this going to work on the Hong Kong version s7 edge?
Sent from my SM-G9350 using Tapatalk
Click to expand...
Click to collapse
Yes. the hardware in the CHC (Mainland China) and TGY (Hong Kong) are identical. so it will work with no issues
rauff lala said:
Thanks mate u made my day i was really stuck with that stupid Chinese version
Sent from my SM-G9350 using Tapatalk
Click to expand...
Click to collapse
Very welcome!
Mlkemac cud u pls help me with with csc flashing i want indian csc to get my volte working
Sent from my SM-G9350 using Tapatalk
Can i use into 935 U,
Thanks in advance
Hi ml i hv managed to install csc indian got VoLTE also but call gets disconnected may b something bot right in rom also i hv to add VoLTE app in system app folder
Sent from my iPhone using Tapatalk
Thank you so much for that, this is great, I've been looking for this for quite a while.
Before I try it out, can you confirm :
1) Is this a full ROM and/or will this wipe my phone user data?
2) If it is a full ROM, will I still receive OTA updates and will I need to re-root afterwards?
3) How to I check my bootloader is unlocked?
4) Any benefit to flash the BL, CP, CSC files in Odin?
Thanks a lot for you input,
Regards,
Benjamin
thank you
mlkemac said:
This is my first ever attempt at this so I cannot guarantee this will not damage your phone or destroy the housing market.
I bought this phone on a trip in China expecting to have a plentiful selection of roms on my return to Canada, only to be met with zero roms, and the only information on Chinese forums.
Having been inspired by the Aurora Rom, I decided to try and build something more compatible with North America
This is based off the latest Hong Kong (INT) firmware G9350ZHU2APG2
So far I have not learned how to properly build a standalone rom (flashable zip) so here is a 100% working guide for now. I will post the zip once I have figured that out
This was only tested on a Chinese G9350 Qualcomm S7Edge. Please don't attempt on any other model
Backup your phone!
Make sure your bootloader is unlocked!
If you already have TWRP, and are having problems mounting data, boot into recovery and Format Data. If you want TWRP first, flash the TAR G9350.TWRP.3.0-321.tar
Boot into download mode
Launch the modified Odin, it will be in Chinese *thanks to TieXue
Load all the corresponding files. (BL, CP, CSC, and the AP file G9350ZHU2APG2.mlkemac.tar) Only the AP is required, the rest is optional
Click the bottom left button to start the flashing process.
Reboot back into download mode
Flash the AP TAR (G9350.TWRP.SuperSU.2.71.tar) This will boot into recovery and flash root
You should now have a rooted, International speedy rom with working recovery
There is no extra bloatware in this rom, however I recommend using TiBu or Package disabler to remove the TouchWiz bloat.
Modified Odin
TWRP
SuperSU Root
TWRP Encryption disabler
Odin AP/PDA Firmware file
Odin BL
Odin CP
Odin CSC
Thank you to all the devs on the Chinese forums http://bbs.gfan.com/forum-1663-1.html, and to Basketbuild for hosting my files.
Any comments or suggestions are welcome!
Click to expand...
Click to collapse
Good work mike. Very good thnx.
Sent from my SM-G9350 using XDA-Developers mobile app
---------- Post added at 06:10 PM ---------- Previous post was at 06:08 PM ----------
Mike what's the twrp encrpt Disabler for its not mentioned in op. Or I'm blind ?
Sent from my SM-G9350 using XDA-Developers mobile app
Good work Mike!
mike can you please check those links none are working for me cheers
xmanz said:
mike can you please check those links none are working for me cheers
Click to expand...
Click to collapse
Never mind down for maintenance. ?
Sent from my SM-G9350 using XDA-Developers mobile app
@mlkemac Thanks! Finally some development
Does anyone who's flashed know if there are camera issues with this ROM? Other ROMs have problems with the cameras just showing red.
Also I assume that knox is tripped on this ROM?
I have the same question with the upstairs.anybody can answer?
zhimaple said:
I have the same question with the upstairs.anybody can answer?
Click to expand...
Click to collapse
Op says works 100% I can't try yet because file server is badly down nearly a week now...
Sent from my SM-G9350 using XDA-Developers mobile app
xmanz said:
Op says works 100% I can't try yet because file server is badly down nearly a week now...
Sent from my SM-G9350 using XDA-Developers mobile app[/URL]
Click to expand...
Click to collapse
well,hoping to hear your good news!
Will this work on the unlocked variant (G935U)
Edge4President said:
Will this work on the unlocked variant (G935U)
Click to expand...
Click to collapse
Where's the u from. ? I think this is HK version only. Msg mikemac
Sent from my SM-G9350 using XDA-Developers mobile app