Database Users

RESOLVED : How to unbrick my sg4 i9505 after wipes ?

I need helps to unbrick my i9505
Before ,phone was on Android 5.0.1
& Base band OHD7
After an wipe all data
I get this screenshot &
phone is not recognize by pc
I have download mode but
i cant obtain recovery mode
Bigs Thanks for all replies.

Download from Sammobile the firmware for your model and country,put the phone in download mode en flash the firmware with Odin and all should be fine

Bigs thanks for answering
I will tray but not with big conviction
Because phone in download mode
is not detected by pc
I will test other pcs & other cables
Thanks very much

Two days ago i had the same issue and i tried on Windows Vista and on Windiws 10,no succes. Succes on Windows 7.
Do you have KIES on your pc? If not download Kies,it will install the nesesarry drivers on your pc.

hi , ludoke
i tried 2nd time with another laptop :
Now my phone is detected by pc on download mode it work on win7
i flash firmware but
i get FAIL with notification there is no partition : attached screenshot
Always no recovery mode and normal reboot give screen get issue with pc <-------->phone
i will try with kies
thanks for encouragements & helps

Then you have to search for firmware with Pit. file and CSC and Modem, Firmware files and flash with Odin ,repartition ticked.
Search or ask here on XDA, i can't help you with that
Did you unpack the firmware zipfile once ? Don't flash the zip file and do NOT tick repartition if you have just 1 file(tar)

Different usb port/ make sure you flash not an old firmware when you are on the knox bootloader.

Hi , Lennyz1988 & Kudoke
Before sofbrick phone was android v5.0.1 & Base band OHD7
I tried flash firmware XXUHOA7 with pit on odin 3.10.6
But i get FAIL attached screenshot on #1
i will test with other odin versions & other pc always win7
kind regards

In howmany files was that firmware ? Firmware from Sammobile has mostly 1 file in the zip,so my advice is to download firmware from Sammobile for your model and country,unpack the zipfile once and you get two files . Go to download mode.
Flash the biggest file in the AP box in Odin and do NOT thick repartition. Use Odin 3.09
Also,use usb 2 port

Lastly i success the flash
I get this far
for that i have reinstalled new Os windows 7 on laptop
i use odin 3.09 and the same firmware XXUHOA7 with 4 files no pit
miraculous thing : green PASS , attached screenshot on #1
i have average fifties flashs sucess & a dozen different devices rooted
but this one make me very happy
I hope that noobs friends share & take advantage of my modest experience in 3 days
Thousand thanks for Ludoke & Lennyz1988.

[Question] Recovery fail?

Hello guys, I am sorry If I annoyed you, but I got one question
If I tried to flash recovery via odin and it suddenly failed.. Will get my phone hard bricked? Like it's uneasy to unbrick it, also, can anyone tell me how to flash recovery via odin?
I got steps from a guy (I dont trust... he ruined my phone once):
1- Download Odin 3.xx
2- Download TWRP 3.0.2.0 for N910F (My phone)
3- Extract twrp files
4- Open odin and load TWRP files
5- Turn off phone and put in download mode
6- Start flash operation, when the phone reboots put it in recovery mode quickly
^ Will those steps work? Please someone help.

TheDon772 said:
Hello guys, I am sorry If I annoyed you, but I got one question
If I tried to flash recovery via odin and it suddenly failed.. Will get my phone hard bricked? Like it's uneasy to unbrick it, also, can anyone tell me how to flash recovery via odin?
I got steps from a guy (I dont trust... he ruined my phone once):
1- Download Odin 3.xx
2- Download TWRP 3.0.2.0 for N910F (My phone)
3- Extract twrp files
4- Open odin and load TWRP files
5- Turn off phone and put in download mode
6- Start flash operation, when the phone reboots put it in recovery mode quickly
^ Will those steps work? Please someone help.
Click to expand...
Click to collapse
Hi TheDon772
As per TWRP installation instructions, you should be downloading a TAR file (xxxx.tar) that you should not EXTRACT it but use directly onto Odin.
Seems you should be using [ Samsung Galaxy Note 4 Qualcomm (trlte) ] right ?
Read the instructions in there ... no extraction.
Please advise.
.

Kdio said:
Hi TheDon772
As per TWRP installation instructions, you should be downloading a TAR file (xxxx.tar) that you should not EXTRACT it but use directly onto Odin.
Seems you should be using [ Samsung Galaxy Note 4 Qualcomm (trlte) ] right ?
Read the instructions in there ... no extraction.
Please advise.
.
Click to expand...
Click to collapse
I knew something was fishy, thanks mate!

Samsung Galaxy Core Prime G360H Software Problems

Problem with samsung galaxy core prime
1) download mode not working
2) dosen't boot (stuck at boot)
3) it has original recovery, no custom recoveries (twrp, cwm, philz etc.) installed - so can't install any rom
4) phone is bricked
5) while installing original softwares from odin it show the following (screenshots included) - stuck at setupconnection...
6) partition problem - tried to install with all files including pit file but dosen't work stuck at set partition (get pit for mapping)
7) tried using adb sideload from stock recovery but dosen't work
8) tried flashing twrp, cwm, philz etc. using odin but dosen't work stuck at setupconnection.
Please help me..... :crying:

Please Help!!! Samsung Grand 2 (SM-G7102) Black Screen!!!

Before this issue happens i try to root my phone using King Root that i download from kingrootapk.com. After i run that apps my phone died. I try to switch on so many time but didnt work. I download stock ROM from firmwarefile.com for my phone version and run the Odin v 1.85.,.it detect my phone but failed to flash that stock ROM ...Please someone help me.

HELLO... your grand2 is softbricked
i can help you!!!
do this:
A.YOU NEED:
1. a windows os
2.your phone
3. download this stock prerooted https://www.androidfilehost.com/?fid=23329332407574426?fid=23329332407574426
4. download odin 3.09 http://www.devfiles.co/download/CAHmXM6c/Odin_v3.09.zip
5. YOU(lol)
B.1.switch your phone download mode ( power+volume down+home)
2. extract odin and stock prerooted
3. open odin 3.09 select pda or ap and select the extracted stock prerooted (NOT the .zip)
4.connect your phone and you will see in odin on upper right corner @[0:] or something like it means your phone connected
5.now press start and wait
6.let the phone boot alone(if it bootloop open recovery and wipe)
7.CONGRATULATIONS
8. you can open settings and see you baseband version and download the official stock
dont forget to press THANKS

Issue regarding flash twrp recovery

I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help

Salmaster007 said:
I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help
Click to expand...
Click to collapse
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy

aslam4580 said:
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy
Click to expand...
Click to collapse
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help

Salmaster007 said:
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help
Click to expand...
Click to collapse
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.

aslam4580 said:
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.
Click to expand...
Click to collapse
Still Im facing same issue

Which recovery are you using ? The one from Nick Verse won't work with the secure bootloader of the latest Mashmallow updates , when I tried i could not boot into recovery using that one ...
The one from this thread is working perfectly for me at the moment :
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960

Try the twrp made by ganesh varma.

1-in odin Untick Auto reboot option.
2-After flushing twrp by Odin, remove the battery and insert it again .
3- press volume up+ home+power button to go to twrt.
4- install supersu.zip
I had this issue on j5h but after doing that i could root my phone.

Thanks Guys for your help..