Pretty simple really (I used Search lol)
Original Post is HERE
MAKE A NANDROID BACKUP FIRST ! ! !
Tested and working perfectly on My HTC One M8
1. Make sure you are Rooted
2. Change to permissive mode using SELinux Mode Changer.
3. Enable developer options -> Uncheck Use NuPlayer (experimental).
4. Flash the zip below from recovery and wait for cache to be rebuilt.
5. BOOM! Enjoy your music flawlessly.
Credits: @zhuhang, @Droidyou, @shubhamgulati91
Is this even necessary? I just installed V4A regular APK on GPE Lollipop and installed driver, boom and done working great, in the past installing these lolliviper zips only lead to no audio on my device at all with missing V4A app and missing built in Google EQ.
Also Disabling NuPlayer doesn't do anything different either, for me it works either way.
I did however have to switch from Enforced to Permissive, it seems like a lot of root apps need that now lol
I found these same instructions myself yesterday and it works perfectly, thanks for condensing it into the M8 Thread here for others. I rely on V4A heavily so it sucked not having it!
@Viper4713 it is not necessary on GPE, V4A worked fine for me too, but on Lollipop Sense 6, V4A was broken
Installed here (GPE + TWRP) and I'm stuck on "Android is upgrading" screen. =/
whitelunchbag said:
I found these same instructions myself yesterday and it works perfectly, thanks for condensing it into the M8 Thread here for others. I rely on V4A heavily so it sucked not having it!
@Viper4713 it is not necessary on GPE, V4A worked fine for me too, but on Lollipop Sense 6, V4A was broken
Click to expand...
Click to collapse
Lollipop Sense worked 100% for me as well, only difference is I had Project ERA on Sense, but I don't believe that fixed it.
Viper4713 said:
Lollipop Sense worked 100% for me as well, only difference is I had Project ERA on Sense, but I don't believe that fixed it.
Click to expand...
Click to collapse
Hmm, since that post I have flashed SkyDragon (Asia WWE) and it didn't need anything to make it work.
I definitely needed to follow the process in the OP when I was running Maximus though.
whitelunchbag said:
Hmm, since that post I have flashed SkyDragon (Asia WWE) and it didn't need anything to make it work.
I definitely needed to follow the process in the OP when I was running Maximus though.
Click to expand...
Click to collapse
@dragonesdenano
selinux is set to permissive and nu player is diabled by default in sd asia rom isnt it mate??
I can confirm that's V4A Xhifi is also working on my M8 with lollipop ARHD 34.0, just install app, install driver, reboot and paf it's working !
Those extra files aren't needed for m8, more time out of ten its gonna break the sound, everything needed is in v4a package/apk. Sorry lol ...not raining on your parade so to speak, just a heads up basically. V4A works just setting to permissive and leaving nuplayer ticked ....still, you should disable it anyway, found out today from another poster that its the cause of the sound bugs.
I managed to install V4A, but when it asks me to install drivers I check install and it says "Install complete, please restart device", when I restart it, it posts the exact same message. The drivers won't install but it says installation was successful. Anyone have any idea what I can do?
is S-off required to install Viper?
EDIT.
it is required
Heads up. The app has been updated to 2.3.4.0 and now supports Lolipop. I just installed on the latest IC Rom and working perfect.
m112 said:
is S-off required to install Viper?
EDIT.
it is required
Click to expand...
Click to collapse
No, it's not required, I'm s-on and running it just fine.
Related
This is a thread specially for the music lovers like me. Many of its have been wandering that how to make viper work on android lollipop, and today I finally found a way out and it will take just a couple of minutes to make viper work on your device.
**Procedure**
1. Install busy box on your device. (If installed skip this step)
2. Download 'SELinux Mode Changer' from playstore and give it root permissions.
3. Now change the SELinux mode to 'Permissive' .
4. Install viper(I used v2.3.3.0) and it's drivers.
Now reboot and enjoy the music.
Please hit thanks if it helped.
will this work on GPE ?
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
thestory101 said:
will this work on GPE ?
Click to expand...
Click to collapse
Yeah, i'm on gpe 5.0.1 and it working preety good!
l36320 said:
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
Click to expand...
Click to collapse
I used the aame process when I was in Brazilian soak test version and it worked perfectly not only for me but also for my couple if friends
l36320 said:
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
Click to expand...
Click to collapse
I had similar issue.
What worked for me was to change the SELinux policy as suggested in this post and then flashing LolliViPER_v2.3.3.0.zip from the below link..
Viper4Android
Do remove the drivers and application before flashing the zip..
l36320 said:
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
Click to expand...
Click to collapse
its solved , by turning mode to compatible
I followed your tutorial, but still can't install viper drivers. Can you help me? I'm using SuperSU 2.40 flashed from philz touch. And Android 5.0.1 GPE
This works, but it breaks phone volume for me. People can hear me, but I cannot hear them.
l36320 said:
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
Click to expand...
Click to collapse
Make it a system app
Tap-a-talked from the MOTOG
It working for me (xt1033)
I wonder, on lollipop viper only works with music app....
But on kitkat viper works not only with music player, but also with youtube, video player, even with phone call ringtone and keyboard sound...
Why is that ?
Sorry for my bad english
Maybe some audio related intents have been changed
Tap-a-talked from the MOTOG
Can anyone plz send me direct viper link
Hey can anyone confirm the process of viper working in moto g xt1033 5.0.2.???
PRAKASHPANDEY193 said:
Hey can anyone confirm the process of viper working in moto g xt1033 5.0.2.???
Click to expand...
Click to collapse
yes it's working for my XT1033 5.0.2
but I use tutorial from here http://forum.xda-developers.com/moto-g/themes-apps/material-t3016037
Make sure you had backup your stock 5.0.2 build.prop because after install viper you will lost your signal
so, restore your stock build.prop and reboot
yustindra said:
yes it's working for my XT1033 5.0.2
but I use tutorial from here http://forum.xda-developers.com/moto-g/themes-apps/material-t3016037
Make sure you had backup your stock 5.0.2 build.prop because after install viper you will lost your signal
so, restore your stock build.prop and reboot
Click to expand...
Click to collapse
Thanks buddy...working fine for me...after trying thousand of time and diffrent way, finally u make mah day...???
Have u find any problem after installing this?? And can u suggest some more root apps for lollipop...thanks nd Cheer's??
Disclaimer: First of all, I do not own any of these files.
[For CM13]:
With effect of build from Aug 2016 onwards, Audio FX will NOT be replaced by any third-party equalizer.
The ONLY solution is to first remove Audio FX by using Root Uninstaller then flash DSP Manager.
DSP Manager is an Equalizer that was once as default equalizer since CM7 and it performs almost identical to beats audio. (Best features: Dynamic Compression & Bass Boost)
Since CyanogenMod has stopped / abandoned work for DSP Manager on CM12 onwards,
I have a solution and had 2 zip files tested and FULLY working on CM12.1 & CM13 (should be also fully compatible with any versions of AOSP, modded, stock Lollipop and future Roms)
I have attached 2 zips (eng.stk's modded zip + patch) that will be needed in order to get the sound enhancement working.
Instructions:
1. Flash the modded v5.0.8 zip
2. Flash the patch(DSP.zip)
If it does not work after performing 2 flashes as mentioned, try flashing v5.0.8 zip on top again after flashing the original DSP zip.
(No wipes required)
Big shout out to CyanogenMod Team and @eng.stk
HTML:
http://forum.xda-developers.com/member.php?u=3873953
for all the works and all credits to them.
Be sure to check out @eng.stk other modded equalizer works.
HTML:
http://forum.xda-developers.com/google-nexus-5/themes-apps/mod-cm-dspmanager-universal-zip-t2939933
DSP Manager might NOT work on all music players.
Original music player(Apollo) has also been included.
Enjoy!
finallau said:
[First of all, I do not own any of these files]
Click to expand...
Click to collapse
Why are you lying about your location? Per Cyanogenmod forums you say you are in Singapore but on here it says England.
SyCoREAPER said:
Why are you lying about your location? Per Cyanogenmod forums you say you are in Singapore but on here it says England.
Click to expand...
Click to collapse
Whats wrong? Its just a location. I can put whatever I like. Is there something you are against with?
finallau said:
Whats wrong? Its just a location. I can put whatever I like. Is there something you are against with?
Click to expand...
Click to collapse
One word: Trust.
Deception is never a good thing. It's up to you what you want to do but I am simply pointing that out for other users so they can make their own informed decision.
SyCoREAPER said:
One word: Trust.
Deception is never a good thing. It's up to you what you want to do but I am simply pointing that out for other users so they can make their own informed decision.
Click to expand...
Click to collapse
One sentence: I dont really like my country
It's working thankyou
hey. is it work on all apps and not just only work on Apollo?
evildog1 said:
hey. is it work on all apps and not just only work on Apollo?
Click to expand...
Click to collapse
Yes. it's working fine on lp5.1.1 for any app including mxplayer.
akhilu said:
Yes. it's working fine on lp5.1.1 for any app including mxplayer.
Click to expand...
Click to collapse
great so i will upgrade my phone to lollipop 5.1.1
This is awesome buddy! I was beating my head against the table for hours trying to figure out why Android 5.1.1 would not have a good equalizer or the prior ability to override the built in craptastic MusicFX. So after googling and reading a ton of workarounds for Lollipop, I found this thread. And using CM in the past, I really like DSP as is does all the things needed (equalizer for headphones, speakers, bluetooth). SO I did as you instructed, flashed the two files in order you mentioned (mod then original) and viola it works. Thanks for taking the time to do this.
I love it to loud lol
Sent from my Nexus 5 using Tapatalk
This would be great if I can just get a custom recovery on my GS4. I have zero success so far. I have OF1 5.01. It is rooted and only the stock recovery works. Anytime I try to install a custom recovery it fails. My bootloader shows the Samsung logo with an open lock indicating it is unlocked too. So I am completely confused on how to get TWRP or CWM on here. I need an EQ badly. This suck!!
Just to let you guys know that this methods works for CM13 / android M aosp roms too
Cheers
Works great on CM 13.0 (Android 6.0) !
Works with Poweramp on Galaxy S4 I9505 (runing CM12.1) , but it makes the sound stutter in voice calls.
Is it supposed to work on Galaxy S4 at all ? Any idea on how to fix stuttering issue in voice calls ?
Thanks for maintaining this mod.
@finallau, any suggestion on sound issue during voice call with dsp manager ?
aksdroid said:
@finallau, any suggestion on sound issue during voice call with dsp manager ?
Click to expand...
Click to collapse
try a wipe cache + factory reset then flash my files.
If still persists, I suggest you update to CM13
Thanks for the suggestion @finallau.
I tried flashing your files over a clean install (wiped system + cache + data, and reinstalled CM12.1 before flashing the files).
Result is the same: music playback works in poweramp with dsp manager effects enabled, but sound is broken during a voice call.
Too bad it does not work, will rely on Viper4Android from now on.
Working great on SGS2 GT-I9100 with CM13 Nightly.
How
How do i flash it on a droid turbo
Firstly, sorry if this is against the rules, I have included credit wherever applicable and am open to any and all improvements.
HTC AUDIO COMPILATION THREAD
I just got an HTC 10 recently and got pulled into the audio mod scene, and the spent over 12 hours trawling through every forum post under the face of the earth to find some way to get my imperceptibly better audio fix working.
This thread is an attempt to help with that by including working files and configurations for the HTC 10, and nothing else.
THIS IS A WORK IN PROCESS AND I DO NOT MAKE ANY GUARANTEES ABOUT THE MODS OR SOFTWARE LINKED FROM HERE
USE AT OWN RISK
V4A-MK - Metaspook
http://metaspook.blogspot.com/p/v4a-mk-mod.html#downloads
ViPER4Android Audio Effects - zhuhang
http://forum.xda-developers.com/showthread.php?t=2191223
Viper4A_Universal_v2.1 - ahrion
http://forum.xda-developers.com/showpost.php?p=67154327&postcount=207
A.R.I.S.E. Sound Systems - A.R.I.S.E. Sound Systems Team
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Viper4Android 2.3.4.0
http://www.mediafire.com/download/cnqqdme51qy9ft4/ViPER4Android_FX_v2340.zip
AM3DZirene_r6.0 - ahrion
http://forum.xda-developers.com/attachment.php?attachmentid=3770271&d=1464879627
AcoustiX - ZeroInfinity
http://forum.xda-developers.com/showthread.php?t=2211163
Ainur - UltraM8
http://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
OTHER RESOURCES
Official Viper4Android Thread
http://forum.xda-developers.com/showthread.php?t=2191223
http://forum.xda-developers.com/showthread.php?t=2283959
http://forum.xda-developers.com/htc-10/help/viper4android-hanging-t3380495
AM3D Zirene Sound thread
http://forum.xda-developers.com/android/apps-games/mod-zirene-sound-am3d-t3396698
http://forum.xda-developers.com/htc-10/how-to/htc-10-audio-thread-t3358064/post66996528#post66996528
Main HTC 10 Audio Thread
http://forum.xda-developers.com/htc-10/how-to/htc-10-audio-thread-t3358064/
REMEMBER TO RENAME/REMOVE /system/etc/HTC_audio_effects.conf AND ENABLE SELINUX PERMISSIVE MODE
TBC
PLEASE SUGGEST CHANGES AND IMPROVEMENTS
Quick post and reservation for future.
Working config for me with each step included (relevant or not, just in case)
Dirty flashed rom to remove traces of v4a (Using Venom)
Installed busybox and xposed
Flashed Metaspook's V4A-MK latest and kernel (Elite)
Booted and gave V4A-MK superuser permissions
Installed driver through V4A-MK
Immediately (soft) rebooted
TO MAKE IRS FILES WORK YOU MUST GO TO SETTINGS>APPS>V4A-MK AND GIVE IT STORAGE PERMISSIONS
V4A was working for me after this, but I do not take responsibility if it does not work for you.
I recommend Dolby atmos 6.6 also made by @ahrion.
I believe the link is in the Original HTC10 audio thread as well.
Also ViperAudio. 4.8 and ViperAtmos. 4.8 by guitarededhero, and others that contributed and tested to make those go to mods for me.
Viper's I mentioned can be found on xda, software development forum. Feel free to link below.
Sent from my HTC 10 using XDA-Developers mobile app
Tried the V4A MK it's working but the app will not read any of the convolvers I put in the kernel folder actually had to make the entire folder myself
Sent from my HTC 10 using Tapatalk
dandan2980 said:
Tried the V4A MK it's working but the app will not read any of the convolvers I put in the kernel folder actually had to make the entire folder myself
Click to expand...
Click to collapse
Literally just solved this problem myself, you just need to give V4A-MK storage permissions in Settings>Apps>V4A-MK and the IRS files will show up fine. Adding to OP.
Thanks man haven't messed with V4A on the newer phones till now
Sent from my HTC 10 using Tapatalk
So far so good with the sound quality
Need Help:
Em using Bluetooth for music.. Like headphones (Jabra) n sound system too.. Lastly on M8 used HK MOD ever... Which one will work best for Bluetooth..
Sent from my HTC 10 using Tapatalk
gauravbhawsar said:
Need Help:
Em using Bluetooth for music.. Like headphones (Jabra) n sound system too.. Lastly on M8 used HK MOD ever... Which one will work best for Bluetooth..
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
I use Jabra Bluetooth Step headphones. I **ALWAYS** used Viperaudio 4.8
Viperatmos 4.8
Dolby atmos
Am3Dzirene 6.0- using it now, very nice.
Project ARISE, EXODUS, etc.. Great group of peeps. Not sure if still compatible with our device.
V4A-MK Mod-works great but use correct version #
Sent from my HTC 10 using XDA-Developers mobile app
Okay, all of this is so complex I dont even know what to say
Would be great to have the best sound available. Is there maybe a custom ROM for HTC 10 with integrated Viper4Android sound mod ?
I know to unlock bootloader, root, flash rom etc.
CroCop18 said:
Okay, all of this is so complex I dont even know what to say
Would be great to have the best sound available. Is there maybe a custom ROM for HTC 10 with integrated Viper4Android sound mod ?
I know to unlock bootloader, root, flash rom etc.
Click to expand...
Click to collapse
just try flashing the metaspook V4A-MK zip
Anyone here uses external USB DAC with their V4A?
I haven't tried a USB dad but I want to. On that note the hdmi output works perfectly. All our TV's have built in days and also sounbars and recievers. Why there is no stand alone dads that I can find with hdmi input I am really not sure. Dies hdmi have better audio than USB I do not know either but sounds damn fine to me. If you just want to had a separate headphone dac/amp then I think any with an xmos processor will work. Also the soundblaster E5 sounds pretty good and should connect.
ibrokemypie said:
Literally just solved this problem myself, you just need to give V4A-MK storage permissions in Settings>Apps>V4A-MK and the IRS files will show up fine. Adding to OP.
Click to expand...
Click to collapse
Tried V4A-MK but I lost all control of my rom, just flashed this http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137/post67579329 and it's working so far stock with root s-off
SkyboneNoya said:
Tried V4A-MK but I lost all control of my rom, just flashed this http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137/post67579329 and it's working so far stock with root s-off
Click to expand...
Click to collapse
were you getting force closes, freezes etc? i think it is either due to busybox or init.d support, the v4amk thread has links to flashable zips for both and after flashing them both it stopped those problems, not sure exactly what it was though.
ibrokemypie said:
were you getting force closes, freezes etc? i think it is either due to busybox or init.d support, the v4amk thread has links to flashable zips for both and after flashing them both it stopped those problems, not sure exactly what it was though.
Click to expand...
Click to collapse
Yeah it would freeze. I also might have had a bad from at the time. Its been a feature packed week.
Got BusyBox installed from Google play now.
Crucial step for sure.
Cheers
V4A works great when using Play Music, but I'm having trouble getting it to run on any other music app, even youtube and my web browser. I even have it set on FX Compatible Mode.
ibrokemypie said:
just try flashing the metaspook V4A-MK zip
Click to expand...
Click to collapse
Im going to try to flash this. Im on the latest Leedroid ROM. is the zip all i need to flash as on his thread it says to flash a Kernel.init zip aswell. Also if something goes wrong do i just dirty flash ROM to get rid of it?
Edit: so i just tryed to install the mk mod zip and it worked fine but after installing the drivers and rebooting the app just freezes and so does phone. I tryed witht he init.d zip aswell and still the same. How do i get this working? Im on leedroid R155 which has the updated busybox.
Edit 2: set selinux to permissive and all works now.
why no AcoustiX on the list?
tdwpkidd said:
V4A works great when using Play Music, but I'm having trouble getting it to run on any other music app, even youtube and my web browser. I even have it set on FX Compatible Mode.
Click to expand...
Click to collapse
Same problem here.
I am creating this guide for Magisk v13 and working modules. Please let me know if there are additional ROMs that this guide works with, but I am trying to keep the steps as simple as possible.
Magisk Installation Instructions:
Download Latest PureNexus / PA ROM and follow those instructions
Boot into the ROM and go through the initial set up, at this point verify that SafetyNet is passing. If it is not you may need to factory reset and re-install your ROM.
Reboot into TWRP
Flash the attached modified Magisk-v13-Pixel (from Goodwin_c)
Flash the attached verified boot signer (from Chainfire)
Reboot the System
Uninstall the version of Magisk Manager that shows up in the drawer
Install the attached version of MagiskManager_v13_new5.apk (from Goodwin_c)
Open Magisk Manager (you may need to wait a bit, I had to clear it from my recents a few times before it launched and asked for file system permissions)
Go to the app settings and tick on Magisk Hide
Re-run SafetyNet and verify it's passing
Working Modules
I will create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
Modules I have modified to work with Pixel:
Emoji One - systemlessly replaces emojie font with Emoji One.
Tethering Enabler - enables tethering on phones where it is disabled by the manufacturer/provider.
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
mac796 said:
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
Click to expand...
Click to collapse
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
uodii said:
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
Click to expand...
Click to collapse
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
mac796 said:
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
Click to expand...
Click to collapse
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
That's cool maybe I'll give it another shot.
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
uodii said:
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
Click to expand...
Click to collapse
Yeah, I haven't tried Titanium backup, I'm using Solid Explorer and Greenify with root and they seem to work alright. I am still using new1, I will update to new5 and play with Titanium to see if I can get it to backup and reinstall an app
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
I'm very interessted about how to modify modules to work with Pixel device !
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Only custom rom? Anyone tried on stock image?
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
maflin18 said:
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
Click to expand...
Click to collapse
Try TWRP RC2
TENN3R said:
Only custom rom? Anyone tried on stock image?
Click to expand...
Click to collapse
The stock image should most likely work, if it works for you or someone else in this thread let me know and I'll update the OP.
y2kbugleung said:
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
Click to expand...
Click to collapse
I'll update the post date in brackets when I make updates here. Goodwin_c does not have his own thread, so I've just been monitoring his android file host account. The original poster has not updated or maintained his guide from the RR thread, so I created a new one to be as up-to-date as possible and include modules as I modify them.
foski said:
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Click to expand...
Click to collapse
I've included both of those. I basically have been using beyond compare to compare the arise module that works with pixel to other modules and re-zipping them and testing with my device.
I see. Thanks.
Btw do you know the difference between v1 and v5 apk?
It seems MagiskHide is gone on v5?
I have tried Magisk-V13 on Pixel-XL with stock ROM.
I haven't tried it with stock kernel, since SafetyNet won't pass (as far as I understand).
Tested with Elemental-X + MagiskManager-v1, SafetyNet does not pass. App always says "cannot use Play service"
Tested with Kirisakura-Rebase-1.36 + MagiskManager-v1, SafetyNet passes.
MagiskManager-v5 does not come with MagiskHide, so I assume it cannot handle SafetyNet.
Both MagiskManager v1 and v5 loads very slowly.
Before the UI could be used normally (it means Magisk is loaded?), ROOT cannot be obtained.
So those boot-up root-required action would probably fail.
Has anyone been able to successfully upgrade to Magisk 17.1 on the latest stock nougat ROM?
Even after the 17.1 Hotfix I still bootloop back into recovery; I've attempted to use the uninstaller first and same result.
Any idea ?
Same here unfortunately
I have this issue too
Anyone aware on how to assist the developer in diagnosing the issue. Seems like no other manufacturers are having the issue with the update.
I have no problem with Magisk 17.1 - but then again I use AOKP - custom roms do not have the problem!
Geez - I dont know how you can use stock - it is useless in comparison to AOKP / Lineage
No custom ROMs have their own set of issues. The best compromise for my usecase was to remain on the latest stock and make all the modifications I required myself.
Are the custom ROMs still on nougat?
Issues ? I don't have any - none ! I use AOKP and it gets updated every week and also gets the monthly security updates - Stock does not.
I have dolby atmos, substratum,magisk and pure freedom.
Oreo is being developed by tdm at the moment - hopefully it will be released soon but I am not holding my breath and am more than happy with what I have right now.
Which version do you guys use prior to 17.1?
16.7
k500zm said:
Issues ? I don't have any - none ! I use AOKP and it gets updated every week and also gets the monthly security updates - Stock does not.
I have dolby atmos, substratum,magisk and pure freedom.
Oreo is being developed by tdm at the moment - hopefully it will be released soon but I am not holding my breath and am more than happy with what I have right now.
Click to expand...
Click to collapse
@k500zm could you possibly tell me how to get dolby atmos working with AOKP? Been a while since I tried, but I couldn't figure it out. Tried to use a Magisk extension but it didn't work. Atmos is the reason I've been staying with stock (that and so snapchat works.)
countercharge said:
@k500zm could you possibly tell me how to get dolby atmos working with AOKP? Been a while since I tried, but I couldn't figure it out. Tried to use a Magisk extension but it didn't work. Atmos is the reason I've been staying with stock (that and so snapchat works.)
Click to expand...
Click to collapse
Go to this post and click on the link and download ViperAtmos 5.5 Sony Beats Edition and flash in twrp
https://forum.xda-developers.com/axo...4#post75053804
k500zm said:
Go to this post and click on the link and download ViperAtmos 5.5 Sony Beats Edition and flash in twrp
https://forum.xda-developers.com/axo...4#post75053804
Click to expand...
Click to collapse
Your link doesn't work. Gonna try to find it on my own but if you can post it I'd appreciate it and so would anyone else who finds this thread.
countercharge said:
Your link doesn't work. Gonna try to find it on my own but if you can post it I'd appreciate it and so would anyone else who finds this thread.
Click to expand...
Click to collapse
There is a whole thread about this in the ZTE AXON 7 MINI THEMES, APPS, AND MODS section below are you just to lazy to look ????
https://forum.xda-developers.com/axon-7-mini/themes/zte-axon-7-mini-lineage-os-dolby-atmos-t3746487
There is the correct link in my post there for viper and atoms !
k500zm said:
There is a whole thread about this in the ZTE AXON 7 MINI THEMES, APPS, AND MODS section below are you just to lazy to look ????
https://forum.xda-developers.com/axon-7-mini/themes/zte-axon-7-mini-lineage-os-dolby-atmos-t3746487
There is the correct link in my post there for viper and atoms !
Click to expand...
Click to collapse
Like I said, your link didn't work, I did search and it lead me to this thread:
https://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Sorry.
countercharge said:
@k500zm could you possibly tell me how to get dolby atmos working with AOKP? Been a while since I tried, but I couldn't figure it out. Tried to use a Magisk extension but it didn't work. Atmos is the reason I've been staying with stock (that and so snapchat works.)
Click to expand...
Click to collapse
countercharge,
You need to perform a fresh install of AOKP. These are k500zm's suggested steps:
Wipe system, data, cache, dalvik
Install AOKP rom; get if from http://xfer.aokp.co/?developer=AOKP&folder=tulip
Install unsu to get rid of Supersu.
Install ViperAtmos 5.5 Sony Beats Edition
Install Magisk
Install gapps
Reboot
Delete "audiofx" and "cyanogen audio" services using sdmaidpro or titanium pro
If you want, install Sony Music player from Magisk app
I am attaching the unsu and ViperAtmos files.
Regards
can someone please try this on his tulip https://forum.xda-developers.com/trek-2/themes/sound-mod-dolby-audio-t3835114
just because tulip and jasmine are very similar
please let me know if it works
I have seen a solution for this problem in 4pda forum if someone got this problem maybe they can look at there.
LeonardoGC said:
countercharge,
You need to perform a fresh install of AOKP. These are k500zm's suggested steps:
Wipe system, data, cache, dalvik
Install AOKP rom; get if from http://xfer.aokp.co/?developer=AOKP&folder=tulip
Install unsu to get rid of Supersu.
Install ViperAtmos 5.5 Sony Beats Edition
Install Magisk
Install gapps
Reboot
Delete "audiofx" and "cyanogen audio" services using sdmaidpro or titanium pro
If you want, install Sony Music player from Magisk app
I am attaching the unsu and ViperAtmos files.
Regards
Click to expand...
Click to collapse
So I finally got around to flashing everything tonight, and unfortunately it doesn't seem that dolby atmos or viper4android are working. They're both installed, but they have no effect on the audio and changing/enabling any of the settings doesn't seem to do anything whatsoever to the sound. I also can't seem to remove audiofx with titanium backup pro. Not sure what I did wrong or how to fix it. Any ideas?
Magisk on the latest stock nougat ROM?
RFrancis said:
Has anyone been able to successfully upgrade to Magisk 17.1 [from working 16.7] on the latest stock nougat ROM?
Click to expand...
Click to collapse
I tried to flash Magisk 17.3 and 18.1 without success on the B15 stock firmware. Had to flash back to the noverity B15 kernel to boot up the stock firmware again.
Magisk 16.7 is working! :good: https://github.com/topjohnwu/Magisk/releases/tag/v16.7
SGH-i200 said:
I tried to flash Magisk 17.3 and 18.1 without success on the B15 stock firmware. Had to flash back to the noverity B15 kernel to boot up the stock firmware again.
Magisk 16.7 is working! :good: https://github.com/topjohnwu/Magisk/releases/tag/v16.7
Click to expand...
Click to collapse
It was. Now although security net passes, Google pay stopped working for ever.....and unless there is a way to make magisk 18.1, working on stock, which to me in unheard of, we stock users have to unroot or flash akop and go through the hustle of making sound work with Dolby.
Cheers