Database Users

cbackup v0.4 - backup/restore tool

I've been a lurker since I got my eris back when root was a dream. Now I have quite a few things floating around my work dirs that aren't on xda or are wanted, so I figured I would start releasing some of my better/more polished things. So here is my first:
cbackup v0.4
Based upon craft_backup v0.5.3: showthread.php?t=628743 (sorry no links)
Backup and restore apps/data just like craft_backup
Changes/Features of cbackup:
- Change names to cbackup and crestore because I got tired of typing out "craft_backup" and "craft_restore"
- Move backup dir to /sdcard/backups/cbackup/*
- For cbackup, allow a choice for destination in backup dir (defaults to cb<date>)
- For cbackup, automatically move backup dir to timestamped location instead of overwriting it
- For crestore, display menu of all cbackup dirs along with original craft_backup dir if it exists. This menu has the latest last, numbered first with number 1 being the default.
- Works with roms that don't have the busybox symlinks installed
Changelog:
v0.3
- First public release
v0.4
- Fix problem when missing bb symlinks
Disclaimer: I am not responsible for damage caused by this app. I take no credit for the good work done on craft_backup, I just wanted something it didn't do so I hacked it up to suit my needs. Eventually it became nice enough to share. I will not support it, unless there is something wrong with my added code (which is possible, since the listing code is complex). Refer to the original app's thread for almost all problems.
nXuaJunYYc

Testing it now.
EDIT: WORKS PERFECTLY- 5 STARS.

Crestore- not found.... help?

I assume you're running "crestore" and not "Crestore" nor "Crestore-". Can you post the output of:
echo "$PATH"
from adb shell?
If that's fine, I think I know what may be wrong, but try that first
edit:
I'll be uploading a new version in a minute that I think will fix your problems, but if it doesn't, if you could also try the following it would be helpful:
# which crestore
# which sed
# echo abc | sed -es/a/d/
# ls -l /system/bin/crestore
# ls -l /system/bin/cbackup
# /system/bin/crestore

So I got it to find it, but it says not found for everything. Also comes up in Italian no matter what, but no biggie.

or use the eris master app, which can do most of that right now. the good thing is that its in a gui interface. jamezelle and i will be adding additional features later for the backup / restore apps as well. and one thing that we will have shortly is the ability to restore market update links for apps installed outside of the market.

@ECLIPS3:
Sorry, I'm a command line guy and I'm a linux guy. I really don't want to install wine and mono on my poor little linux netbook just to run your app and then navigate a gui. Plus these scripts run entirely on the phone, so you should be able to run them anywhere with only your phone (maybe even using terminal on the phone...haven't tested that yet). And before we start a war, I'm not saying that there is anything with wrong with your app, and I'm sure it has/will help a lot of people who want the easy gui, but it wasn't for me, and I thought other people may feel the same way. There's no reason both apps can't exist. I also appreciate you letting people know in this thread so the less cli-oriented people know their options.
@Erisftw:
That is really strange if it's continuing to not give you a choice for language. Are you sure you flashed the latest one that I uploaded (cbackup-v0.4-signed.zip)? And that you made your backup either using v0.4 or using v0.3 on a phone with busybox properly installed. If so could you copy and paste the first ~20 lines of output from crestore, and let me know if you are on windows or linux?

dont worry, not trying to start a flame war at all. i love diversity and competition as it creates better programs to arise, that ultimately are better for the end user. theres plenty of room for everyone here. i love CLI as well, but not a lot of people do. arent you glad this is a free world to have competition?

Changed to 4, restored. fine, but it has old rosie, and when you click on the app, it says app no longer installed.

Android For Dummies

This thread is aimed for those who are new, or in the dark about the terminologies used throughout this forum. I do hope it will in some way or another enlighten you, and help make understanding what you read much easier:
Ill start off below with some basic terminology of the android platform, and also some file types:
Common Terminology
adb: Android Debug Bridge, a versatile tool lets you manage the state of an emulator instance or Android-powered device
ADK: Android Development Kit, What people use to develop anything for the droid such as ROM's
Baseband: In communications and signal processing, the baseband describes signals and systems whose range of the frequencies measured from close to 0 hertz to a cut-off frequency, a maximum bandwidth or highest signal frequency; it is sometimes used to describe frequencies starting close to zero
Boot Loader: State in which the droid can be flashed from RSD with an appropriate .sdk file that reprograms the phone into a specific ROM or update. This is typically a last resort when the recovery screen cannot be reached to make a much simpler and less risky solution
Boot Loop: simply means something is preventing the phone from completing it's boot cycle and is stuck between the boot animation and the unlock screen, creating a looped animation. This is often fixed by either reloading a Nandroid, or Reflashing a rom from the Boot Loader.
Brick or Bricked: Jargon for a completely unrecoverable device, (no more than a brick or paperweight)
Bug or Software Bug: an Error or flaw in software that produces a failure or unexpected/unwanted result. Typically created from incorrect code, this is why some ROMs are better and smoother running than others because certain developers have taken the time to input "perfect" code
Busybox: BusyBox is a single multicall binary that packages the functionality of most widely used standard Unix tools, BusyBox provides a fairly complete environment for any small or embedded system.
ClockworkMod: A recovery program that is often used to apply updates, ROMs, or create a back up or restore a backup file
De-odex: Apk files have respective odexes that devs use to supposedly save space. Deodexing means you convert it back to a .dex file and put it back inside the apk. This allows you to easily replace files (not having to worry about odexes), but the main point was to deodex services.jar so that you can change all text to different colors (such as the clock color to white) and to deodex services.jar, you need to deodex everything.
Dev. or Developer: An individual that creates, or alters a file in such a manner as to advance the program
Flash or Flash Memory: a program technology that can be electrically erased and reprogrammed
Kernel: The governor of the CPU usage and Battery output, one can upload certain Kernels to achieve greater performance speed of their device at the cost of some battery life
Nandroid or Nandroid Backup: A file typically created in the custom recovery program, such as SPRecovery, that is a carbon copy of whatever state your phone is in before a drastic change is made. the file then can be moved onto or off of the SD card for later use in case something should go wrong in the ROM or Update, or a Boot Loop occurs
OS: Operating system, I.E. Windows Vista or MAC or ANDROID
Overclocking: Speeding up the CPU past the factory presets to achieve a faster and more responsive device
ROM: Read Only Memory, a program used to make changes to anything from the look of the home screen, to icons to custom boot animation
Root: Common word associated with giving a user "super user" access to their phones programming and other various aspects that would normally not be possible, also known as "Jailbroken" for iPhone's
Shell or SSH: secure shell or ssh is a network protocol that allows data to be exchanged using a secure channel between two networked devices
SPR or SPRecovery: A recovery program that is often used to apply updates, ROMs, or create a back up or restore a backup file
Stock: Simply means an unaltered state, such as when you first purchase your phone from Verizon, or when you do a factory reset. Current stock image is Android 2.2 (Froyo)
SU: "Super user", or root permissions
Theme: A set of icons, backgrounds and app trays that change the ascthetics of the overall look of the droid and its applications
TUN/TAP: Refers to a network Tunnel, operates within layer 3 packets, or ip packets. Packets sent by a system via a TUN/TAP device are delivered to a user-space program that attaches itself to the device. A user space program may also pass packets into a TUN/TAP device. In this case TUN/TAP device delivers (or "injects") these packets to the operating system's network stack thus emulating their reception from an external source.
Underclocking: Slowing down the CPU mainly to limit battery usage
File types:
.apk or APK's: An .apk file extension denotes an Android Package (APK) file, an .apk file can be opened and inspected using common archive tools
.sbf: Summation Briefcase File
.tar: Similar to a zip file, a tar file archives multiple files into one file
.tgz: TGZ files are commonly used as install packages for Slackware Linux.
.zip: Zipped file used to archive multiple files into one to save space and allow for single download
Reference Source: http://developer.android.com/guide/appendix/glossary.html

Understanding Root Terms & Procedures
Understanding ROM’s and builds
A ROM is essentially a custom version of Android. They are developed by independent geniuses smarter than you and me. Each tweaks, combines, or optimizes Android to offer something standard versions lack. Within ROM’s, you have what are known as builds (basic branches of Android code) that offer certain features and characteristics.
Think of it as a crude metaphor for Microsoft Windows. There’s XP, Vista, and Windows 7. All three are Windows operating systems and can typically run the same programs, but there are major differences between them. Within each OS, there’s further distinction between Vista Home, Vista Pro, and Vista Ultimate. Likewise, one ROM can spawn multiple versions. For instance, there are several flavors of Drake’s Hero ROM..
Each developer creates his ROM with its own purpose and feature set. Just because something works in Cyanogen’s ROM doesn’t mean it can work in Drake’s (or more specifically that they want to implement the feature at all).
Be advised that some ROM’s require a wipe (erases all information stored on your phone) before or after installation. This is done when you enter the recovery mode and perform a “factory data reset.” Developers will say if a wipe is necessary whenever you flash (load/install) a ROM
Where To Download ROMs
You’ll notice that ROM threads begin with the “[ROM]” tag. you can download them from here ALWAYS read the instructions before attempting to load a ROM. Each contains critical instructions or requirements that can cause big trouble if not followed correctly. Be sure to read change logs/release notes (plainly stated notes written by developers to explain updates). They will reveal important information and point out new features.
Before loading a ROM, perform a backup!
Using Recovery images and Nandroid back-ups
You may remember the recovery image from the one-click process. You’ll also use the recovery image to change ROM’s, apply themes, backup your phone state, and perform other functions. To launch the recovery image, turn off your phone and reboot by pressing Home and Power at the same time.
Performing a backup is typically a good idea when you enter the recovery image to load a ROM. I try to backup my phone at least once every 3 times I update to a new ROM. Nandroid will backup your phone’s state, allowing you to return to the settings/state saved to your SD card. If something goes wrong, it can be your best friend. The Cyanogen recovery image that came with one-click thankfully has Nandroid built-in, allowing easy backup/restore.
Credit to Androinica (Reference Source): http://androinica.com/2009/09/how-to-understand-android-root-terms-and-procedures/

Saved for Future Posts

Nice post for green-hand.

Thanks for taking the time to set this one up.

ur most welcome. if you have any additional information that u see fit to be added on, or any mistakes that need correction, please feel free to PM me

[UPDATED][INFO] ROM 101 + CWM Errors Solutions

Parts of a ROM
i. The kernel.
Android (like many other Smartphone operating systems) runs on the Linux kernel. The Linux kernel was created in the early 1990’s by a gentleman named Linus Torvalds in Helsinki, Finland. It’s incredibly stable, incredibly friendly, and incredibly difficult for the layman to understand and modify. Thankfully it’s also very popular so it has been ported on to a multitude of hardware, including our Android devices.
Think of the kernel as an interface layer between the hardware and software on your device. The kernel decides when things happen, such as the LED indicator gets lit or when the soft button's LED gets lit. An application sends a request to the operating system to blink the LED. The operating system then sends the request to the kernel, which makes the light flash for the amount of time requested by the OS.
What sounds like a round-about way to get things done is also what makes the system so scalable and robust. Application developers only have to code in a way the operating system understands and the kernel makes it work on the hardware. This also keeps the application running in it’s own user-space and separate from the kernel. That means when you run the latest uber-cool app that wasn’t designed for your particular OS version, or is still very beta and it crashes, the kernel gives you the option to Force Close the application and the kernel can run untouched.
In a standard Android ROM (we will leave developer images and the like for another discussion) the kernel is bundled along with a set of instructions that tell the device how to load the kernel and the OS during boot. This is the boot.img that you see inside a zipped ROM that your not able to easily open. The device knows to extract this image to internal memory (the ramdisk) and follow a series of scripts (init scripts) to load the kernel and then the other portions of the OS. That’s what’s happening while you’re watching the boot animation. Interestingly enough this is done the same way for a PC, your smartphone, an Android tablet, or even a smart Linux powered toaster. If you’re feeling exceptionally geeky, plug your Android phone into the USB port on your PC and let the PC boot from the USB device. No, it doesn’t actually load, but you can watch the animation while it tries to match up the hardware support with what’s inside your PC. As I said, Linux is amazingly scalable and as a result so is Android.
What is a kernel? If you spend any time reading Android forums, blogs, how-to posts or online discussion you'll soon hear people talking about the kernel. A kernel isn't something unique to Android -- iOS and MacOS have one, Windows has one, BlackBerry's QNX has one, in fact all high level operating systems have one. The one we're interested in is Linux, as it's the one Android uses. Let's try to break down what it is and what it does.
Android devices use the Linux kernel, but it's not the exact same kernel other Linux-based operating systems use. There's a lot of Android specific code built in, and Google's Android kernel maintainers have their work cut out for them. OEMs have to contribute as well, because they need to develop hardware drivers for the parts they're using for the kernel version they're using. This is why it takes a while for independent Android developers and hackers to port new versions to older devices and get everything working. Drivers written to work with the Gingerbread kernel on a phone won't necessarily work with the Ice Cream Sandwich kernel. And that's important, because one of the kernel's main functions is to control the hardware. It's a whole lot of source code, with more options while building it than you can imagine, but in the end it's just the intermediary between the hardware and the software.
When software needs the hardware to do anything, it sends a request to the kernel. And when we say anything, we mean anything. From the brightness of the screen, to the volume level, to initiating a call through the radio, even what's drawn on the display is ultimately controlled by the kernel. For example -- when you tap the search button on your phone, you tell the software to open the search application. What happens is that you touched a certain point on the digitizer, which tells the software that you've touched the screen at those coordinates. The software knows that when that particular spot is touched, the search dialog is supposed to open. The kernel is what tells the digitizer to look (or listen, events are "listened" for) for touches, helps figure out where you touched, and tells the system you touched it. In turn, when the system receives a touch event at a specific point from the kernel (through the driver) it knows what to draw on your screen. Both the hardware and the software communicate both ways with the kernel, and that's how your phone knows when to do something. Input from one side is sent as output to the other, whether it's you playing Angry Birds, or connecting to your car's Bluetooth.
It sounds complicated, and it is. But it's also pretty standard computer logic -- there's an action of some sort generated for every event. Without the kernel to accept and send information, developers would have to write code for every single event for every single piece of hardware in your device. With the kernel, all they have to do is communicate with it through the Android system API's, and hardware developers only have to make the device hardware communicate with the kernel. The good thing is that you don't need to know exactly how or why the kernel does what it does, just understanding that it's the go-between from software to hardware gives you a pretty good grasp of what's happening under the glass. Sort of gives a whole new outlook towards those fellows who stay up all night to work on kernels for your phone, doesn't it?
Click to expand...
Click to collapse
ii. The operating system.
Once the kernel is loaded, the init scripts tell the Operating System to load. Android is the user interface for a custom built Java virtual machine called Dalvik. Dalvik was written by Dan Bornstein, who named it after the fishing village of Dalvik in Iceland, where his family originated from. The debate of which Java VM is superior is best left for another discussion, so I’ll simply say that DalvikVM is a register-based machine versus true JavaVMs which are stack based.
The Dalvik machine creates executable files (.dex files) which can be interpreted by the OS and run by the end user. These .dex files are OS version dependant. That simply means that applications and core functions built to work with one version of Android may or may not work well with other versions. Google provides the tools through it’s Software Development Kit (SDK) for applications to communicate with the OS.
Click to expand...
Click to collapse
iii. Core functions.
No smartphone would be complete without a set of functions that allow the device to be used as intended. Things like the phone and dialer interface, the calendar, the messaging system are core functions of the Operating System. In Android, these are run on top of the kernel as separate applications. The merits (or lack of) of providing these needed functions as separate applications is once again best left for another discussion, but this is what allows developers like HTC or Motorola to replace the standard functions with alternatives that provide a different look and feel from stock. HTC’s onscreen keyboard or Motorola’s MotoBlur contact list are great examples of this. The “little guy” isn’t left out of the mix either. Handcent SMS or Chomp SMS can integrate into the OS very well, as most of us already know.
An additional set of Core Functions are provided by Google. Popularly called GoogleBits, things like Gmail, sync, Gtalk and the Android Market are applications written by Google that give an extra set of useful functions to the OS. You’ll find these on all smartphones, as well as many other Android devices.
Click to expand...
Click to collapse
iv. Optional applications.
These are applications provided by the manufacturer to give the device even more usability. Things like the Amazon MP3 store, PDF readers, Corporate Calendar etc. allow you to do even more with your device. Remember - Droid Does
Click to expand...
Click to collapse
B. How is a ROM packaged?
In most cases a ROM will come packaged in a .zip file. The recovery image’s kernel (yes, it has one too!) has the ability to unzip and copy the contents into the correct place. Inside this zip file is a folder (META-INF\com\google\android\) that contains a script prepared by the ROM “cooker” (another of those techie terms - it means the person(s) who developed the ROM) that tells the system what to format, what to copy and where, and any file operations that need to be done. Each device does things a bit differently, but this script is where it all gets done. More on this folder later.
You’ll also see a /system folder. This is the meat of the ROM. It has the necessary OS files, the Core functions, and any optional applications the cooker decided to include. The folder is structured the same way it is on your device - /system/app, /system/framework, etc. The whole tree is usually copied over and the existing /system folder is overwritten. The cooker uses the script to tell the kernel to erase the existing system folder, copy the new folder over, and set the file permissions.
Sometimes you will also see a data folder. This usually is space set up for optional applications, including optional system tools like busybox or SuperUser white list. These applications could be placed in the /system folder, but placing them in the data folder makes it easier for the end user (you and I) to remove or update them as needed.
You’ll also notice a META-INF folder. This contains the update script we talked about earlier, as well as secure keys that need to be provided so the device knows the update can be trusted. A special note needs made here. Trusted means that the update is trusted to be in the correct form to load the device. It in no way means the ROM is safe from malicious code. Anyone is able to use a set of test keys and create a ROM that will flash and run your device - even those people with bad intentions. Flashing and running a custom 3rd party ROM is putting faith in the cooker that he or she not only knows what they are doing, but are honest as well. Also, some Motorola custom ROMs will have a small update.zip stored inside this folder to be run on first boot of the device.
Finally we are left with the boot.img file. This is the kernel and ramdisk image we discussed earlier. Your phone copies this over to be decompressed and run when the device boots.
Click to expand...
Click to collapse
2. How do I install a ROM?
In this section we’re discussing how to install a custom 3rd party ROM. ROMs from the manufacturer usually have a utility that runs on your PC to flash and load the new image.
A. Got Root???
What is Root?
Android rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem.
Rooting is often performed with the goal of overcoming limitations that carriers and hardware manufacturers put on some devices, resulting in the ability to alter or replace system applications and settings, run specialized apps that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user. On Android, rooting can also facilitate the complete removal and replacement of the device's operating system, usually with a more recent release of its current operating system.
As Android derives from the Linux kernel, rooting an Android device is similar to accessing administrative permissions on Linux or any other Unix-like operating system such as FreeBSD or OS X.
The process of rooting varies widely by device, but usually includes exploiting a security bug(s) in the firmware (i.e. in Android) of the device, and then copying the su binary to a location in the current process's PATH (e.g. /system/xbin/su) and granting it executable permissions with the chmod command. A supervisor application like SuperUser or SuperSU can regulate and log elevated permission requests from other applications. Many guides, tutorials, and automatic processes exist for popular Android devices facilitating a fast and easy rooting process.
For example, shortly after the HTC Dream was released, it was quickly discovered that anything typed using the keyboard was being interpreted as a command in a privileged (root) shell. Although Google quickly released a patch to fix this, a signed image of the old firmware leaked, which gave users the ability to downgrade and use the original exploit to gain root access. Once an exploit is discovered, a custom recovery image that skips the digital signature check of a firmware update package can be flashed. In turn, using the custom recovery, a modified firmware update can be installed that typically includes the utilities (for example the Superuser app) needed to run apps as root.
The Google-branded Android phones, the Nexus One, Nexus S, Galaxy Nexus and Nexus 4, as well as their tablet counterparts, the Nexus 7 and Nexus 10, can be boot-loader unlocked by simply connecting the device to a computer while in boot-loader mode and running the Fastboot program with the command "fastboot oem unlock".[9] After accepting a warning, the boot-loader is unlocked, so a new system image can be written directly to flash without the need for an exploit.
Recently, Motorola, LG Electronics and HTC added security features to their devices at the hardware level in an attempt to prevent users from rooting retail Android devices.[citation needed] For instance, the Motorola Droid X has a security boot-loader that puts the phone in "recovery mode" if a user loads unsigned firmware onto the device, and the Samsung Galaxy S II displays a yellow triangle indicator if the device firmware has been modified.
Click to expand...
Click to collapse
Yes ?:good:!!!
Custom ROM’s simply will not load on devices that aren’t rooted. In theory, it may be possible to sign a 3rd party ROM with the keys that the stock recovery image will flash, but for the most part you need to have flashed a custom recovery image before you can change your device’s ROM. Instructions and tutorials on how to root your device are all over the internet. Some are good, some are bad. The hacking forum is a great place to go and learn more about rooting and how to successfully get it done on your device.
Click to expand...
Click to collapse
B. Recovery
Most Android devices have had a custom recovery image written for them. This will overwrite the stock recovery image, allowing you to flash 3rd party ROMs as well as giving extra functionality. Help with finding and flashing the custom recovery image for your device can also be found in the hacking forum. The installation of a custom recovery image also allows for a very important function. Backup and restore.
Click to expand...
Click to collapse
.C. Nandroid
Nandroid is a set of bash scripts and code written by that copies the state of your system and stores it in a folder on your SD card. You can then use the restore function of Nandroid to restore to this point at any time. This is a priceless feature and reason enough to root your phone. It’s included by default in most custom recovery images, and the code is freely available to use if you’re inclined to write your own recovery image.
Click to expand...
Click to collapse
In most situations, using Nandroid to back everything up is easy:
1. Verify you have a memory card with enough free space (~300MB to backup, ~500MB to restore).
2. Reboot your device into recovery. It’s slightly different for each device, once again hacking forum FTW!
3. Navigate through the menu and select the Nandroid Backup function.
4. Apply your choice and wait for the device to tell you it’s finished.
It’s always good practice to copy the entire nandroid folder from your SD card to a safe place. You can then copy it back to the SD card if the card is ever damaged, lost or erased.
D. Copy and Flash
You’re rooted, have downloaded a custom ROM, have your system backed up and are now ready to flash your device. This is not nearly as scary as it sounds.
1. Mount your SD card to your PC, and copy the .zip file to the root folder of the card. Don’t unzip the file, and don’t look for a folder called root. The root folder in this case means the base folder, what you will see when you mount your card to a PC or the device.
2. Reboot your phone into recovery.
3. Navigate through the recovery menu and select the flash update option. Depending on your recovery image, the file may need to be named update.zip, or you may be able to select any zip file on your card as long as it’s the correct format. The cooker knows this as well and if the ROM needs to be named update.zip it will be.
4. Apply your choice and wait for your device to tell you it’s finished.
5. Reboot.
Click to expand...
Click to collapse
It’s worth noting that many times a new ROM will require that you wipe and factory reset your devices data. While inconvenient, it’s often necessary to get rid of the old data as it may be incompatible. As long as you’re using the cloud for calendar and contacts, they will be re- downloaded and stored back on your device automatically.
Dirty flash and Clean flash
A dirty flash is only wiping cache and davlik then flashing your ROM....
a Clean flash is at LEAST factory reset/data wipe + wiping davlik(factory wipe takes care of /cache also)... Maybe doing a format /system also.

ERRORS encountered in CWM Recovery
.
What is CWM Recovery ?
ClockworkMod Recovery is a custom recovery for many Android devices. It is considered to be the most popular recovery for Android due to its easily-ported nature, and integration with ClockworkMod ROM Manager by Koush(Koushik Dutta). The easiest way to recognize it is by the printed name when it first starts, and the background logo of a gear and hat.
Click to expand...
Click to collapse
ERROR STATUS 6
This is usually caused by CR/LF EOL(Windows style End Of Line) in updater-script. Change it to LF EOL(Unix Style EOL) using Linux command: dos2unix updater-script, then re-signing the ZIP, will usually fix this error.
Click to expand...
Click to collapse
ERROR STATUS 7
This is usually caused by a corrupt download, or bad file signature. Re-downloading (or re-signing) the ZIP will usually fix this.
Click to expand...
Click to collapse
We have been consistently seen and heard people facing error “Status 7″ error while trying to flash or install
custom ROMs or firmware packages on their Android smart phones or tablets with ClockworkMod Recovery. Many
of the users are nowadays facing this problem with CWM Recovery while flashing .zip files of modded or custom
Ice Cream Sandwich (ICS) or Jelly Bean (JB) ROMs on their devices. So, you have also downloaded a custom ROM,
placed its .zip file in your phone’s or tablet’s SD card, booted into ClockworkMod Recovery, selected – “install zip
from sdcard” and then chosen the .zip file of the ROM to get it installed on your device. But instead of getting
flashed successfully, if you are facing the issue mentioned below, then just keep reading this article to find out
what’s wrong and fix up the problem :
Finding update package…
Opening update package…
Installing update…
Error in /sdcard/custom-jelly-bean-rom.zip (Status 7)
Installation aborted
Click to expand...
Click to collapse
or the following error right after CWM recovery shows –
Installing update…
assert failed: getprop(“ro.product.device”) == “I9103″ || getprop(“ro.build.product”) == “I9103″ || getprop
(“ro.product.board”) == “I9103″
Error in /sdcard/android-4-1-1-ics-rom-latest.zip (status 7)
Click to expand...
Click to collapse
So, if you are facing any of these errors while trying to install the desired custom ROM package on your Android
phone or tab, then you may try a various things or steps which may turn out to be the workaround of this
problem. Here are a few tips to get this “Status 7” error fixed in ClockworkMod Recovery and flash the ROM
successfully on your device :
(1) First of all, make sure your device’s bootloader is unlocked. If it is already unlocked but you are still
not able to flash the ROM, then just extract the .zip file of the ROM into a new folder, find the boot.img file from
that directory and flash it up on your phone or tablet via fastboot on your PC.
(2) Make sure that you are having the appropriate Radio or Baseband version installed on your device which is
supported by the custom ROM you are trying to flash. Most of the ROMs requires the latest version of Baseband, so
just update or upgrade your device to the latest Baseband version and then try to install the ROM once again.
(3) Update your device to the supported / latest build of official firmware before trying to install the ROM. You can
do it from – Settings > About Phone / Device > Software Update.
(4) Make sure you are having the supported or required kernel installed on your phone or tab. If it’s not, then flash
a new kernel right away and try to install your custom ROM once again.
(5) Is the ROM which you are trying to flash really works ? Find out whether it is working for other users or not.
Click to expand...
Click to collapse
Error Status 0
Well sometimes while flashing some ROMs especially the cooked ones we get Error status 0 in the CWM Recovery
this error is an indicator of Wrong Update Binary.This is usually caused by an incompatible update-binary in edify ZIPs. Replacing it with a compatible one, then re-signing the ZIP, will usually fix this error.
Click to expand...
Click to collapse

Now it's time for the partitions :good:
Let’s start with a list of standard internal memory partitions on Android phones and tablets. These are:
/boot
/system
/recovery
/data
/cache
/misc
In addition, there are the SD card partitions.
/sdcard
/sd-ext
Note that only /sdcard is found in all Android devices and the rest are present only in select devices. Let’s now take a look at the purpose and contents of each of these partitions.
/boot
This is the partition that enables the phone to boot, as the name suggests. It includes the kernel and the ramdisk. Without this partition, the device will simply not be able to boot. Wiping this partition from recovery should only be done if absolutely required and once done, the device must NOT be rebooted before installing a new one, which can be done by installing a ROM that includes a /boot partition.
/system
This partition basically contains the entire operating system, other than the kernel and the ramdisk. This includes the Android user interface as well as all the system applications that come pre-installed on the device. Wiping this partition will remove Android from the device without rendering it unbootable, and you will still be able to put the phone into recovery or bootloader mode to install a new ROM.
/recovery
The recovery partition can be considered as an alternative boot partition that lets you boot the device into a recovery console for performing advanced recovery and maintenance operations on it. To learn more about this partition and its contents, see the ‘About Android Recovery’ section of our guide to ClockworkMod recovery.
/data
Also called userdata, the data partition contains the user’s data – this is where your contacts, messages, settings and apps that you have installed go. Wiping this partition essentially performs a factory reset on your device, restoring it to the way it was when you first booted it, or the way it was after the last official or custom ROM installation. When you perform a wipe data/factory reset from recovery, it is this partition that you are wiping.
/cache
This is the partition where Android stores frequently accessed data and app components. Wiping the cache doesn’t effect your personal data but simply gets rid of the existing data there, which gets automatically rebuilt as you continue using the device.
/misc
This partition contains miscellaneous system settings in form of on/off switches. These settings may include CID (Carrier or Region ID), USB configuration and certain hardware settings etc. This is an important partition and if it is corrupt or missing, several of the device’s features will will not function normally.
/sdcard
This is not a partition on the internal memory of the device but rather the SD card. In terms of usage, this is your storage space to use as you see fit, to store your media, documents, ROMs etc. on it. Wiping it is perfectly safe as long as you backup all the data you require from it, to your computer first. Though several user-installed apps save their data and settings on the SD card and wiping this partition will make you lose all that data.
On devices with both an internal and an external SD card – devices like the Samsung Galaxy S and several tablets – the /sdcard partition is always used to refer to the internal SD card. For the external SD card – if present – an alternative partition is used, which differs from device to device. In case of Samsung Galaxy S series devices, it is /sdcard/sd while in many other devices, it is /sdcard2. Unlike /sdcard, no system or app data whatsoever is stored automatically on this external SD card and everything present on it has been added there by the user. You can safely wipe it after backing up any data from it that you need to save.
/sd-ext
This is not a standard Android partition, but has become popular in the custom ROM scene. It is basically an additional partition on your SD card that acts as the /data partition when used with certain ROMs that have special features called APP2SD+ or data2ext enabled. It is especially useful on devices with little internal memory allotted to the /data partition. Thus, users who want to install more programs than the internal memory allows can make this partition and use it with a custom ROM that supports this feature, to get additional storage for installing their apps. Wiping this partition is essentially the same as wiping the /data partition – you lose your contacts, SMS, market apps and settings.
With this, we conclude our tour of Android partitions. Now whenever you install a ROM or mod that requires you to wipe certain partitions before the installation, you should be in a better position to know what you’re losing and what not and thus, you’ll know what to backup and what not.
ADB-Android Debugging Bridge
Android Debug Bridge (adb) is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device. It is a client-server program that includes three components:
A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
A daemon, which runs as a background process on each emulator or device instance.
You can find the adb tool in <sdk>/platform-tools/.
When you start an adb client, the client first checks whether there is an adb server process already running. If there isn't, it starts the server process. When the server starts, it binds to local TCP port 5037 and listens for commands sent from adb clients—all adb clients use port 5037 to communicate with the adb server.
Click to expand...
Click to collapse
The server then sets up connections to all running emulator/device instances. It locates emulator/device instances by scanning odd-numbered ports in the range 5555 to 5585, the range used by emulators/devices. Where the server finds an adb daemon, it sets up a connection to that port. Note that each emulator/device instance acquires a pair of sequential ports — an even-numbered port for console connections and an odd-numbered port for adb connections. For example:
Emulator 1, console: 5554
Emulator 1, adb: 5555
Emulator 2, console: 5556
Emulator 2, adb: 5557
and so on...
As shown, the emulator instance connected to adb on port 5555 is the same as the instance whose console listens on port 5554.
Once the server has set up connections to all emulator instances, you can use adb commands to access those instances. Because the server manages connections to emulator/device instances and handles commands from multiple adb clients, you can control any emulator/device instance from any client (or from a script).
Note: When you connect a device running Android 4.2.2 or higher to your computer, the system shows a dialog asking whether to accept an RSA key that allows debugging through this computer. This security mechanism protects user devices because it ensures that USB debugging and other adb commands cannot be executed unless you're able to unlock the device and acknowledge the dialog. This requires that you have adb version 1.0.31 (available with SDK Platform-tools r16.0.1 and higher) in order to debug on a device running Android 4.2.2 or higher.
Syntax
You can issue adb commands from a command line on your development machine or from a script. The usage is:
adb [-d|-e|-s <serialNumber>] <command>
If there's only one emulator running or only one device connected, the adb command is sent to that device by default. If multiple emulators are running and/or multiple devices are attached, you need to use the -d, -e, or -s option to specify the target device to which the command should be directed.
LOGCAT
The Android logging system provides a mechanism for collecting and viewing system debug output. Logs from various applications and portions of the system are collected in a series of circular buffers, which then can be viewed and filtered by the logcat command. You can use logcat from an ADB shell to view the log messages.
-b <buffer> Loads an alternate log buffer for viewing, such as event or radio. The main buffer is used by default. See Viewing Alternative Log Buffers.
-c Clears (flushes) the entire log and exits.
-d Dumps the log to the screen and exits.
-f <filename> Writes log message output to <filename>. The default is stdout.
-g Prints the size of the specified log buffer and exits.
-n <count> Sets the maximum number of rotated logs to <count>. The default value is 4. Requires the -r option.
-r <kbytes> Rotates the log file every <kbytes> of output. The default value is 16. Requires the -f option.
-s Sets the default filter spec to silent.
-v <format> Sets the output format for log messages. The default is brief format. For a list of supported formats, see Controlling Log Output Format.

awesome thread to learn everything in a quick while

Again.? :good:
But highlight the Status error with big & bold font.

Disturbed™ said:
Again.? :good:
But highlight the Status error with big & bold font.
Click to expand...
Click to collapse
I think he's trying to take over XDA
But just to keep this on topic, great thread for those who are learning and aren't sure what certain things are for.
I guess I'll have to make another thread in this forum just so other RCs don't take all the ideas
SGS2 FAQ | HTC One FAQ

KidCarter93 said:
I think he's trying to take over XDA
But just to keep this on topic, great thread for those who are learning and aren't sure what certain things are for.
I guess I'll have to make another thread in this forum just so other RCs don't take all the ideas
SGS2 FAQ | HTC One FAQ
Click to expand...
Click to collapse
Lolzzz.. Yes buddy. He is something else.
Collecting Informations & useful stuff for all users. May be in near future, he will take over XDA.

It's all your love guys. Sometimes even my guides correct my mistakes!
Started from the bottom

Guys if you like this thread please press the tip us button so that more and more people who are willing to learn about android phone and how they work can get help.
I will be grateful to you all.
Started from the bottom

Very nice write up TechnoCrat :good::good::good:
TEAM MiK
MikROMs Since 3/13/11

Long way to go mate!
Congo! This thread got featured on XDA Portal
http://www.xda-developers.com/android/android-101-how-it-all-fits-together/

Thank you very much. I needed this definition thread. I kinda understand but it'd nice to hear official language that's understandable.
Sent from that FBI van parked down the street.

Thanks for the CWM errors write up and another bookmark.

Tha TechnoCrat said:
i. The kernel.
If you’re feeling exceptionally geeky, plug your Android phone into the USB port on your PC and let the PC boot from the USB device. No, it doesn’t actually load, but you can watch the animation while it tries to match up the hardware support with what’s inside your PC
Click to expand...
Click to collapse
What. The. Hell. Are you talking about?
If you mean booting the device's kernel on the PC, unless the device uses an x86 processor, it flat out will not boot, let alone mount the device's system, to display the bootanimation.zip
/snarkieness
Sorry, I had to let that out.
Also, init is called/started after the kernel has started, and generally after it has setup most of the hardware.
so I’ll simply say that DalvikVM is a register-based machine versus true JavaVMs which are stack based.
Click to expand...
Click to collapse
I don't even truly understand that, so could add a little more detail, or remove it?
I'm speaking mostly from my implied knowledge, gained from tinkering with android/linux for a few years.

ADB and Logcat added

Hey, Thanks for the article. Can you talk about root? There is some mis-leading information and I really want to learn about it. Thanks again.

ak700 said:
Hey, Thanks for the article. Can you talk about root? There is some mis-leading information and I really want to learn about it. Thanks again.
Click to expand...
Click to collapse
Okay buddy
Editone! !!
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"

Bump to update newbies
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"

[Edit: Not SOLVED] Pulling /system via ADB doesn't pull WLAN/Wi-Fi modules.

Going to try and make this short and adequately detailed:
I've not worked on or directly tampered with ROMs for about 2 years (though I did with individual apps) now and when I felt like working an OxygenOS optimized & stripped 'base ROM' (with GApps, Swiftkey etc. properly exterminated from the ROM) to allow other devs (and myself) to make ROMs on top of (lack of OOS based ROMs makes me sad, even if CM is seen by most as superior). I have figured out a problem which has never occurred to me before in any of my devices or the experience I had a while ago.
I find that when I pull /system from the stock or modified stock OxygenOS ROM that WLAN/WiFi modules aren't being properly pulled for me. This is true for me both if I am pulling with the OS properly booted and functioning or if I am pulling when being in recovery.
This is a problem because I have to add them manually each time around I pull /system from my device to the dump which simply is inconvenient and wastes time for me.
Of course my other alternative is to take a nandroid and extract from nandroid but I don't know how to decompress backups made with TWRP 2.8+ with Windows (normally I'd run a unixlike system for work but I had to temporarily move Arch off my USB drive which I needed for an OS installation onto another system). (The ext4 backups don't open in the tools I traditionally used.)
(In case you are asking, I am running adbd as root in order to do the operations, I won't forget that after such a while.)
Oh and by the way, the ROM base itself otherwise once the missing libs are added runs fine, I've tested it already. I've still to zipalign my apps and optimize the images (JPGs & PNGs) inside the system apps as well as add some of my battery optimisations into the ROM (w/ default kernel config --> I'm shipping Boeffla [with all necessary credits due] w/ its config app given all other kernels are dead ATM, also shipping the SD810 tweaks). SuperSU, busybox and other common tools are obviously already integrated. In fact I'm posting from it right now though I'm in a rush typing this up because the frustration I had (trying to figure out why WLAN wasn't initially working and then not figuring out why the modules weren't pulling) has now reduced me to 4h of sleep :/.
Sent from my ONE A2003 using Tapatalk
Edit: Solved by using a different ADB version as admin and a shorter directory without spaces.
Edit2: Not solved
wlan.ko still doesn't pull when I pull /system.

A comprehensive guide to the Lenovo Yoga Tab 3 Pro (YT3-X90*) and a Cooked ROM

THESE COOKED ROMS ASSUME YOU HAVE ALREADY AN UNLOCKED BOOTLOADER AND TWRP AS RECOVERY SYSTEM. You can flash them using TWRP, after wiping ART, cache, data, boot and system partitions.
FINAL RELEASE: Well... this is the final release from me and it is specifically for the WiFi model. I hope it is worth it for you. It is more stable and somewhat updated, anyway, if you use a X90F (wifi model) you will probably like it. The other versions are still up for whatever reason. Here's the link. Follow this guide by @Quardah if you are coming from a factory ROM. Go to post 46 if you can't get past the setup wizard. A barely tested (by @Nuihc88) version for the 3G (X90L) model can be found here.
NOTICE: If you find this work useful, mirror it. I won't be hosting it for free forever and it is becoming a burden to my Nextcloud installation. One would say this is a pretty much forgotten thread, but I'm seeing almost daily download activity. I'm putting the ROM files offline now and getting away from XDA for a while. Please don't DM me for the files. If you are looking for them, ask others in this thread. Good bye.
||||||||||||||||||| FROM HERE IS JUST INFORMATION YOU PROBABLY DON'T NEED |||||||||||||||||||
Spoiler: NEWS THAT ARE NOT ANYMORE.
APRIL 9, 2021: You can find in these links a new version of the cooked ROM.
The link for the updated cooked ROM is: https://centsoarer.ddns.net/s/Y8o3eoBK4Ryx5RP. This is a version with GAPPS updated: https://centsoarer.ddns.net/s/FPKjgQcmW3CHZCw. Feel free to mirror, unless you are afraid of Lenovo's lawyers, but don't forget to share the link.
My personal version... even more debloated (if you don't need chinese, japanese, korean, or russian input support/apps) and with CPU tweaks for my own usage: https://centsoarer.ddns.net/s/jcCDAgNedryGRjo
KNOWN ISSUES AND SOLUTIONS:
1) One random reboot after the first boot will happen and it is normal.
2) I'd reccommend to stay with Magisk 21.4 for a while, Magisk Manager >21.4 won't manage your extensions.
3) If you can't get past the initial Setup Wizard check post 46. Basically you have to boot into bootloader, erase the config partition and format it again.
4) Needs confirmation, but versions with signature spoofing patches seem to break Lenovo's SmartSide Bar.
JUNE 12: Fast update on the Cooked ROM and TWRP and KERNEL. They are not as universal as I implied before. Proceed carefully since they may not work four your device/firmware. Make a Nandroid backup and only flash with testing purposes.
JUNE 5: So, I know this is not what everybody who owns this tablet wants to have (that is Android 9 or 10 of course) but, in recent weeks Lenovo updated the firmware of this tablets. It still is a Marshmallow one and it still sucks big time but I took it as a base and cooked it to deliver a newer TWRP recovery with compression, a flashable modified kernel and a cooked flashable stock ROM to free the owners of this tablets from the treacherous path of making this hardware to work properly. If you want a better overall experience and are in stock firmware you just need to Unlock your bootloader, flash TWRP, Format data partition (not only wipe), Wipe Cache, Dalvik/ART, System and DATA and flash the Cooked ROM to put this tablet in a sweeter spot. For details go to post #2!
JUNE 3: Been trying to get to know some of the source code available for Cherry Trail devices and I am fairly lost at building TWRP from source. Anyway, I ported a newer TWRP recovery IMG file for the YT3-X90F (maybe L, X, Y and Z) from the TWRP image for the Chuwi Hi10 Pro tablet from here, using AIK-Linux. The result is in the second post labeled as beta, since I only tested in the YT3-X90F model, running lollipop firmware. So far, it works fine flashing ZIP archives, backing up and restoring backups. Advantages? Well, backups are way lighter if you enable compression (like half the size), higher resolution, twrp turns off the screen with a timeout and whatever made them bump from version 2 to 3. While I could port a newer TWRP version, I just wanted to have lighter backups with compression... so maybe it is what it is .
ORIGINAL POST STARTS HERE. This is general information that I collected for geeks or desperate users that bricked their tablets. When I started this post it wasn't intended to produce a cooked ROM that would include most of these hacks. You don't need this if your tablet boots to Android or TWRP. You also don't need this if you are ready to flash the cooked ROM.
(This is a lenghty post. I suggest you to navigate by section header and find the one you might need.)
There are several Lenovo Yoga 3 tablet models out there and, while some of them enjoy of prime community support as the Yoga Tab 3 Plus, this Intel Atom powered tablet is pretty much forgotten and, at the same time, users were recently buying this tablet, which is a great piece of hardware but has the most terrible support by Lenovo.
Spoiler: WHAT LENOVO TABLET(S) IS THIS GUIDE FOR?
Basically, this is that Lenovo tablet with an attached projector and an Intel Atom Cherry Trail x5 Z8500. There are several models, though, to my knowledge they vary in their code names in the last letter, the two most basic ones (2GB RAM, 32 GB ROM) are the YT3-X90F and the YT3-X90L, the former connects to the internet by WiFi and the latter being the one with LTE/Phone capabilities. There are other models, though, and they vary on the amount of RAM and internal storage. Apparently, the YT3-X90[YX] models (the 4/64 GB refresh) have some use for these firmwares we describe, but in a very specific way, if you own a Y or X model, keep reading, especially the next section.
Spoiler: EXPLAINING HOW TO FIND THE RIGHT STOCK FIRMWARE
Lenovo support has been terrible (there are no words to describe it, really), so they launched this tablet with Android 5.1 Lollipop and they maintained it for a while but were very slow to deliver Android 6.0 Marshmallow. In fact, there was already Android Nougat, when they sent the Marshmallow update. Nevertheless, the update was bad. Performance issues were always a thing and some functionality went lost in the update (less intuitive multiple windows, a crippled recents activity/screen, and a laggy overall experience). Bottom line, they launched a curated Android Lollipop 5.1 firmware with security updates until March 2016 (striked because the last lollipop update f*cks up my sensors, except the light one) and a half-assed Android Marshmallow 6.0.1 firmware.
Of course, at the time, I'm guessing most of us upgraded to Android Marshmallow 6.0.1, hoping the upgrade would fix the issues in Lollipop or with security patches in mind. The reality was that Android 6.0.1 wasn't nearly as maintained as 5.1 and security ambitions went nowhere. So, we got the upgrade all right, but at this point, both Android versions can be considered inherently insecure and we really shouldn't be using it for sensitive work.
OK, there are several Android 5.1 and 6.0 firmwares, you can recognize them because they are all over the internet typically in a compressed format. For example, this firmware hosted in androidhost.ru named:
YT3-X90F_ENG_S100265_1601281130_WW24_ROW
Is a firmware for the Lenovo Yoga Tab 3 (YT3) Pro (X90) Wifi Version (F). The ENG part is an indication of the build type, ENG is an engineer build while USR is probably a firmware for the end user (this is common now that I know a bit more about AOSP source code), it is a Lollipop firmware (S1, Marshmallow would be a S2) with update version (00265), date of compilation and a good estimate of its security patch (1601281130), the WW24 is the weekly release version of the Android kernel for Intel devices (the latest, in May 2020, being WW31 which is exactly the same as WW28 and not updated since 2016), the final part means it is the global ROM version (ROW, opossed to the Chinese version CN). This is the latest Lollipop firmware I am aware of, so, as an example, an imaginary Android Marshmallow Chinese firmware for the LTE version of the Yoga Tab 3 would look like:
YT3-X90L_USR_S200013_1610141535_WW24_CN
As an additional note the Chinese ROMS, I presume, are not trusty but they are also Google-free for what it's worth. On the other hand, they ship with a "Lenovo Services Framework" that should be as intrusive as the Google Play Services. Oh, also, baidu and yandex, and, really, any less traditional search engine can help you find a fitting firmware.
Spoiler: EXPLAINING HOW TO FLASH A STOCK FIRMWARE (DOWNGRADE TO LOLLIPOP AND UNBRICK)
I did test several firmwares, chinese and global, lollipop and marshmallow and the safest and easiest way to flash them is by using the Intel Platform Flash Tool Lite . I can't say I trust in this site, but it hosts a handy tutorial on how to use it, though, is pretty intuitive. The software exists for Mac, Windows and Linux, be sure you are in, at least, the 5.8.x version, this is important to avoid the need to install some special drivers separately as a pre-requisite. Grossly, Intel Flash Tool Lite works like this:
0) Turn off your tablet if it is on.
1) Launch Intel Platform Flash Tool Lite.
2) If your downloaded firmware is in zip format load it with the blue "Browse..." button.
2 bis) OR, if your firmware is in other compressed formats, uncompress it first. After this use the "Browse..." button to load the "flash.json" file.
3) In Configuration option select "blank" if it isn't set already. Optionally, un-tick the "On-demand flash" option to have more control of this process. Also, maybe you can use the "erase" configuration here.
4) Start your tablet in DNX mode. To do this, press Vol- and hold it, then Vol+ and keep holding both, then press the Power button until it turns on and you see the Lenovo logo and some text indicating you are in said mode.
5) Connect your Yoga Tablet with a USB cable and your Intel Platform Flash Tool Lite windows should show it as detected. Now you can proceed using the blue "Start to flash" button.
6) Keep an eye on your tablet, since some firmwares will prompt to set some more options. Unless you know what you are doing, answer "Yes" to any question.
7) Reboot and wait.
If a couple hours have passed and the tablet hasn't booted, maybe you should try another firmware.
IMPORTANT NOTE AND INSTRUCTIONS FOR YT3-X90Y AND POTENTIALLY YT3-X90X USERS: I don't know the rules in xda about linking to other forums but in certain forum there is an answered question about the Y model (the 4/64 GB WiFi only refresh) on how to flash a firmware. Instructions are the same as I gave in this section, except, apparently, you need to do it twice, first with the ENG version and the second time with the USR version except you are not using the flash.json file, this time you'll browse for the flash_factory_1st_stage.json one and the factory1st configuration in fastboot. It is not clear what are the consequences of not doing it this way or what if you combine different firmware versions (it would be interesting to have a tester here). Notice please, these firmwares are marked for the YT3-X90F model. So, clarifying:
1) Follow the instructions above to flash the YT3-X90F_ENG firmware.
2) Power off your tablet.
3) Boot into bootloader (not in DNX, you need to boot into bootloader by powering on while holding Vol+).
4) From the YT3-X90F_USR firmware folder use Intel Platform Flashing Tool Lite to load the flash_factory_1st_stage.json and select the factory1st configuration.
5) After flashing the USR firmware, reboot and you should be good to go.
METANOTE: This wasn't tested by me, please do this only when you are hopeless with your hardware. This is just an educated guess but I bet it works the same with the YT3-X90L (the LTE version 2/32 GB Yoga Tab 3 Pro) and the YT3-X90X (the 4/64 GB refresh).
ALTERNATIVE WAY TO FLASH A STOCK FIRMWARE (ADVANCED USERS, requires fastboot)
Well, there is no need, really, to use that Intel tool. In my search for a lollipop firmware (I wanted to downgrade from Marshmallow) I found the firmware YT3-X90F_USR_S100195_1512052308_WW24_ROW in www.firmware247.com or www.androidfilehost.com (IMPORTANT: please read the note on downgrading to Android 5.1 Lollipop in the note at the end of this section). This firmware was special since, if you are in Windows and have fastboot executable ready and in place, you can run a script (run_me.bat) in the Windows terminal (CMD) or Powershell to flash the firmware semi-automatically. I think this firmware was modified, though, since I found differences in the boot.img when compared with stock firmwares. This script is credited to XDA members @ionioni and @joesnose and you can replicate its steps if you:
0) Turn off your tablet if it is on.
1) Start your tablet in DNX mode. To do this, press Vol- and hold it, then Vol+ and keep holding both, then press the Power button until it turns on and you see the Lenovo logo and some text indicating you are in said mode.
2) Connect your tablet to your fastboot enabled PC using a USB cable.
3) Input "fastboot flash osloader loader.efi"
4) Wait 5 seconds to be sure the loader flash finishes.
5) Reboot into Bootloader. If you don't know how, one way is to hold Vol+ and Power on your tablet.
6) Input "fastboot oem unlock" and confirm using Vol keys to select the right option and the Power button to enter it.
7) Input "fastboot flash system system.img"
8) Input "fastboot flash boot boot.img"
9) Input "fastboot flash recovery recovery.img"
10) Input "fastboot flash bootloader bootloader.img"
Follow your instincts, since I don't know if these IMG files are always named the same. You can get these IMG files from downloaded sources or dump them yourself using dd command.
NOTE ON DOWNGRADING TO ANDROID LOLLIPOP 5.1: So, one of my main concerns has been to go back to Android Lollipop. There is a last version of Lollipop from where you can upgrade to Marshmallow with a security patch from March 2016. Nevertheless, you MAY end up loosing other sensors except the light one. If this happens, you need to use a complete firmware flash using Intel Platform Flash Tool Lite. In my experience, some boot images are not compatible with other weird partitions like country or misc.
Spoiler: TWEAKS ALREADY IN THE COOKED ROM
The first boot takes some time even amounting for the time of the setup itself. By the time you are in the launcher tapping on app's icons you think there's nothing wrong with our device, but after some apps are in memory, you notice some lag. You think "OK, it is updating, but soon it'll settle", but it does not. So, you reboot again after updates and fire up a terminal emulator and connect to your tablet using a USB cable with USB debugging turned on and issue a free command to find something like this:
Code:
total used free shared buffers
Mem: 1950372 1820964 129408 0 7756
Swap: 524284 10740 513544
Total: 2474656 1831704 642952
Which means you have a total of ~2.5 GB (this is the 2 GB model). So, did I download that extra half GB of RAM or Lenovo was feeling generous? Well, no. The issue here is Lenovo built the kernel with zRAM support which is a technology included in Linux that reserves space in RAM to quickly compress and uncompress pages of data exceeding our physical amount of RAM installed (2 GB). This is not Virtual Memory as in a swap file/partition or Windows' Page File inside storage media. zRAM literally reserves a fixed amount of physical RAM space (blocks) to expand it by compressing data. The consequence is you loose "fast RAM" (THE RAM) and gain some "slow RAM" (the zRAM). You also sacrifice some CPU power to compress/decompress data and, with this, some battery juice is also lost.
That does not sound like a terrible trade-off for a RAM-limited device, one would think. Another interesting thing would be WHEN to send this piling data in "fast RAM" to the compressed space and WHEN to get it back. Two parameters control the WHENS, one is called "swappiness" (when to send it to the compressed space, the "slow RAM") and the other may be the "vfs_cache_pressure" (when to uncompress it and send it back to the "fast RAM"). And this is where the main problem is, really, because the kernel, Linux, is pressing the RAM constantly to send some less prioritary data to "slow RAM" and, at the same time, is trying constantly to send compressed data back to the "fast RAM". Summarizing, this kernel behavior is practically minimizing the fast RAM amount and usage while maximizing the "slow RAM" usage. This is nuts, by default a swappiness and a vfs_cache_pressure of 100 are not even default for servers, these parameters extremely prioritize that processes can get done no matter how slow they get, and they are even more nuts when Android is designed to work without swap space.
What that free command is telling us is the tablet is using the "slow RAM" even when we only just turned it on. Fortunately there are two ways to fix this problem: one is to completely disable zRAM, the other one is to use ZRAM a whole lot less by tweaking the swappiness and vfs_cache_pressure parameters. This can be easily done with the following sentences in a rooted tablet:
Code:
# echo 5 > /proc/sys/vm/swappiness
# echo 50 > echo 5 > /proc/sys/vm/vfs_cache_pressure
Or, to regain the whole fast RAM:
Code:
# swapoff /dev/block/zram*
One caveat of the first method, reducing swappiness, is there is still a lot of RAM (one quarter of the whole RAM in a 2 GB device) reserved as "slow RAM".
SOME ROMS DID NOT ENABLE KERNEL SAMEPAGE MERGING, UNFORTUNATELY
Additional to the sorry implementation of zRAM, some firmwares support a fabulous Linux tool to reduce RAM usage called Kernel Samepage Merging (KSM) but they don't use it by default. This software runs at kernel level, so, it really is CPU-wise inexpensive and, opposite to zRAM it can actually recover some RAM usage by reducing the amount of data flagged as redundant in physical RAM by merging it. KSM is good for you and you should have it always enabled by issuing the following command as root:
Code:
# echo 1 > /sys/kernel/mm/ksm/run
STOP WRITING AND FIX MY RAM! PLEASE!
Well... are there any people interested on this? With the above information you can write a script to execute at boot. Something like this should work in any version of the firmware:
Code:
#!/system/bin/sh
# Mount system as rw
busybox mount -o remount,rw -t auto /system
# Tweaking swappiness in zram
echo "5" > /proc/sys/vm/swappiness
echo "50" > /proc/sys/vm/vfs_cache_pressure
# Activating Kernel Samepage Merging
echo 1 > /sys/kernel/mm/ksm/run
# Remount system as ro. noatime option for faster and volatile system
# busybox mount -o ro,remount,noatime /system
busybox mount -o ro,remount /system
exit 1
Or, you can unpack the boot.img and modify the init.cht_ffd.rc (lollipop) or the init.r2_cht_ffd.rc (marshmallow) files to write these values as default... or, if there is interest for something easier, I can produce this boot.img files for you to flash using fastboot.
ROOTING THE LENOVO YOGA TAB 3 PRO (YT3-X90[FL])
Here I am not gonna write a lot. Instructions were given in this thread. I'd only recommend to put vm.targetutilization at 0.8 top 0.85 in system/build.prop
After rooting, debloat your firmware. I use the app "/system/app mover" from Fdroid to convert to user apps and uninstall them. Also, if rooting is not your cup of tea, you can install AppOps software to freeze all those apps that you don't use regularly. Also, I couldn't patch my services.jar for Signature Spoofing with Nanodroid patcher in the most recent lollipop firmware, but it did work in Marshmallow... anyway I'll do it manually.
ARE YT3-X90F AND YT3-X90L FIRMWARES INTERCHANGEABLE?
I own a WiFi only device (YT3-X90F) so I can't assert they are interchangeable. If I owned the LTE version and use a WiFi firmware I would expect to loose LTE functionality. Now, on the other direction is more interesting because I've been using a LTE firmware version for weeks (as a matter of fact, the one joesnose linked in his How-To debrick this tablet, flashed with the instructions I posted for advanced users it even updated to recent 2020 firmwares). The only tweak you need for this to work well is to add "ro.ril.disable=1" in the build.prop file. So, yes, firmware for the LTE version work in the WiFi version but kind of not vice versa.
Spoiler: YT3-X90(FL) UN-DEVELOPMENT
No news here. All capable people interested on developing for this device are all done with Lenovo and their attitude against Open Source. Don't expect your situation to change.
I'm happy to know there are still a couple of developers interested on this device. I won't cite them by linking their names but they are OOEvil and alquez, the first guy is trying to make a Generic System Image (GSI) ROM compatible with our tablet, I don't know the details so I wouldn't go further. Alquez has been active in this thread and, while he is trying to figure out how to build a kernel, he believes the best way to start having some alternative to official Lenovo firmware is by using a firmware kernel (a prebuilt kernel) to, first, build a more up-to-date TWRP recovery.img and from there try to build CyanogenMod 13, which was based on Android Marshmallow 6.0.1. My guess is newer Android versions wouldn't work if we can't build the kernel from source.
PHOTO ALBUM OF YT3/X90Y BIOS
This photo album documenting every screen option in the BIOS of the Yoga Tab 3 Pro may or may not help someone, but it contains a lot of useful hardware information and guidance for those attempting to boot something else than the original Android 5 or 6 firmware. Using this options, that are accessible through F2 at boot with an attached USB keyboard, you could try Linux distributions on the tablet or even attempt to run Windows, @alquez informs it works fine with a recent distro but the mainline kernel is lacking touchscreen and battery support. This is absolutely his work and he asked me to share it. I hope it serves someone. It is hosted in a rather obscure website but it was the only reasonable placeholder I could find for the 321 photos.
Hope this helps someone, I just didn't want to keep it to myself. Have a nice day!

Just remember, if your tablet is 3G capable I strongly suggest that you modify the line "ro.lenovo.tablet=wifi" to "ro.lenovo.tablet=3gdata" and remove the line "ro.radio.noril=true" to your build.prop file in /system. To do this you can use the section Build.prop Editor of the Kernel Adiutor app or you can do it manually if you have already a method to modify system files. If you do not use mobile data at all, you may leave the build.prop as it is, you'll save a lot of battery by using only wifi.
Spoiler: Some old info here, but maybe useful
ONLY FOR TESTING: Cooked ROM, newer TWRP and tweaked kernel
ONLY TRY THESE FOR TESTING PURPOSES, THE TWEAKS ARE ALL SAFE TO USE BUT ONLY FLASH FOR TESTING PURPOSES, PLEASE. FIRST, TRY TO USE FASTBOOT TO BOOT THE boot.img FILE WITHOUT FLASHING: IF IT BOOTS GO AHEAD AND TRY THE OTHER FILES (fastboot boot boot.img). THE TWRP IS NOT AS STABLE AS THE OTHER ONE HERE AT XDA BUT ALLOWS TO USE ZIP COMPRESSION IN BACKUPS. I AM NOT GONNA BE AROUND. IF YOU TRY SOMETHING MAKE A BACKUP FIRST. THIS DEVICE IS MESSY AS F*CK.
Spoiler: Some old info here, but maybe useful
I wrote a very detailed guide about these files I uploaded to my Nextcloud that include the newer TWRP-3.0.2, a TWRP flashable Cooked ROM and a separate kernel (boot.img) in case your system is already setup, but the post went to some XDA void and didn't upload. These are based on the YT3-X90L latest firmware, but they work on the X90F model too. The TWRP should work with Lollipop and Marshmallow firmwares.
I can't write everything again, so, the kernel contains better management of RAM and emmc (internal) memory, a 256 MB zRAM space instead of 512 and a more conservative approach to LowMemoryKiller.
The cooked ROM includes the described kernel and debloated apps, it's already rooted with Magisk (you can unroot with Magisk Uninstaller), an updated Busybox build, su.d support (I plan to use it with AFWall+), zipaligned apps, etc. It is for the X90L but possibly works for the other Yoga Tab 3 Pro models. It works for the X90F but it will reboot once after the first boot because the RIL configuration times out. To install the cooked ROM you need to:
0) Know that by doing this you will loose pretty much everything in your tablet. You start from scratch if everything goes smooth, if not you could possibly end up with a system without an OS. The usual stuff when you are customizing your system.
1) Boot into TWRP and make a Nandroid backup. IT IS IMPORTANT because @joesnose had problems with a "random reboot" and lost Bluetooth/WiFi after it. I am trying to look into this. The only difference is his tablet has 4 GB RAM and probably a different firmware.
2) Wipe cache, Dalvik/ART, System and Data in TWRP - Wipe, Advanced Wipe menu. If your tablet is encrypted, or in factory firmware you also need to explicitly use the button "Format Data partition" and confirm writing "yes" in the format procedure prompt. You will loose any configuration made to your tablet.
3) Install the superr_stockMM.zip wich is flashable by selecting the file from your Internal tablet memory, using the Install button in the main TWRP interface.
FOUR IMPORTANT NOTES TO COMMON ISSUES:
If you come from a stock firmware your data partition is encrypted. You need to pass a blank password in TWRP to continue to use the custom recovery. You also need to format data partition before flashing the cooked ROM.
If your tablet is WiFi-only I strongly suggest that you modify the line "ro.lenovo.tablet=3gdata" to "ro.lenovo.tablet=wifi" and add the line "ro.radio.noril=true" to your build.prop file in /system. To do this you can use the section Build.prop Editor of the Kernel Adiutor app or you can do it manually if you have already a method to modify system files. In Lollipop firmware you use "ro.ril.disable=1" instead of "ro.radio.noril=true" to get the same effect: sort of a conversion to WIFI-only tablet from LTE models. I'd argue this is useful to do if you are gonna be without LTE connection/service for long periods of time and I can think a couple of other uses.
Do not use stock Lenovo launcher unless you uninstall Magisk... they are incompatible for reasons I don't care to know and the Launcher will constantly FC (it is a pain in the arse).
If you are still expecting better performance I am sure there are some tweaks left in RAM management but it wont go too much further in 2 GB devices. Instead, you may consider to lower your display resolution and pixel density to something reasonable as 1400x2240 or even 1200x1920 maintaining the same aspect ratio. To do this you do not need to have root but you need to interact with the tablet using ADB. First change the size of your display:
Code:
adb shell wm size 1400x2240
Then adjust your density:
Code:
adb shell wm density 260
If still is not enough you can go even further with 1200x1920 and 224, use the same method to go back to stock with 1600x2560 and 300 to 302. This won't need a reboot but will probably cause an inconsistent UI that will lead to FCs and random reboot. You can just reboot after applying these tweaks. Unless you are really sight-gifted you won't notice a lot has changed but you will be dealing with 2.x Mpixels instead of 4.x Mpixels and that will help with your overall performance as well as your battery life sacrificing a pixel count that most of the people wouldn't even notice. If you did this correctly, in the next boot sequences you'll notice an offset on the Lenovo orange logo.
It is important to say that your display supports 1600x2560 pixels physically, but I'm assuming the GPU has no dedicated RAM and uses the device's, so, by reducing the quantity of pixels the GPU needs to deal with, the pressure on the device's RAM is also reduced.
EXTRA TIP: If boot annoys you just delete /system/media/boot.wav, bootanimation.zip and shutdownanimation.zip and you'll get a silent boot and the generic android boot animation.
Hope you enjoy your tablet!
TWRP-3.0.2.0- BETA: Again, this is not a flashable zip. Uncompress first and test the recovery system using "fastboot boot twrp_yt3-x90f_beta.img". If everything works for you, you may want to flash it permanently rebooting to bootloader and flashing with "fastboot flash recovery twrp_yt3-x90f_beta.img". Remember I did not test this in Marshmallow yet.
FEATURES:
- Fixed RAM issues (swapiness 10, vfs_cache_size 50 and disabled dynamic low memory killer tweaks and minfree values).
- Reduced zRAM size to only 256 MB.
- Tweaked interactive CPU scheduler to use other than min and max frequencies (but still responsive). The tweaks are based on the Advanced Interactive Governor Tweaks Guide. This may save battery life.
- Max frequency capped to 2.08 GHz (this is not great if you are a gamer). This tablet throttles when using max frequency for a long time, so, to save battery and keep it cooler I tweaked the CPU to run slower.
- Tweaked I/O schedulers to use deadline governor and read ahead cache to 640 kb (used benchmarks to get to this value).
- Force encryption disabled (to avoid applying ionioni script after flashing). Still needs to format data partition. You can encrypt your data partition later through Configuration -> Security user interface.
- Implemented native init.d support (not su.d anymore and no need to root the main OS).
- Busybox updated.
- Rooted with Magisk by default ( you can use Magisk uninstaller to unroot).
- Debloated apps. I also deleted Lenovo User Experience Program which was asking for root privileges even when you don't opt in to the Lenovo UE Program at setup wizard. I find this behavior shady.
-Multi-window mode is available in Developer Options and needs to be activated by you. In this mode if an app is compatible with multi-window mode you can double-tap on its title bar to enable Window mode. This function was more transparent in Lollipop firmware but it is still there in Marshmallow firmware if you change the build type to userdebug instead of user in build.prop (that's how I enabled it in the Cooked ROM).
- There are also other tweaks in VM and KSM.
And that's it, I'm not trying to change a lot, only the fundamental issues. But I suggest some other tweaks up there.

Such a shame. I love my Yoga Tab 3 Pro. Great hardware. But the software. Thanx anyway for your work.

Very nice write up. Thanks.

joesnose said:
Very nice write up. Thanks.
Click to expand...
Click to collapse
You're welcome. Thanks to you, while learning about this hardware your username pops everywhere.
jahfaby said:
Such a shame. I love my Yoga Tab 3 Pro. Great hardware. But the software. Thanx anyway for your work.
Click to expand...
Click to collapse
It really, really sucks. Let's hope something interesting happens after these strange and recent updates.

CENTSOARER said:
V1: The zip name boot_mod_mm.zip is based on the latest boot IMG provided by Lenovo. You need to first uncompress and flash it using fastboot (this is not a TWRP flshable zip). If you are uncomfortable flashing, you can test it only by issuing "fastboot boot boot_mm_march20_mod.img" once uncompressed, or, if you feel fine using it you can flash it permanently by using the command "fastboot flash boot boot_mm_march20_mod.img". This boot IMG will only work with Marshmallow firmwares in both YT3-X90(FL).
FEATURES:
- Fixed RAM issues (swapiness, vfs_cache_size and low memory killer tweaks).
- Reduced zRAM size to only 128 MB.
- Tweaked interactive CPU scheduler to use other than min and max frequencies (but still responsive). This saves battery life.
- Max frequency capped to 2.08 GHz (this is not great if you are a gamer). This tablet throttles when using max frequency for a long time, so, to save battery and keep it cooler I tweaked the CPU to run slower.
- Tweaked I/O schedulers to use deadline governor.
- Force encryption disabled (it's unnecesary to apply ionioni script now). Still needs to format data partition. You can encrypt your data partition later through Configuration->Security user interface.
Click to expand...
Click to collapse
Thanks for this. Going to take it for a spin.

joesnose said:
Thanks for this. Going to take it for a spin.
Click to expand...
Click to collapse
Please, please provide feedback and don't forget to wipe caches.

alquez said:
"No news here. All capable people interested on developing for this device are all done with Lenovo and their attitude against Open Source. Don't expect your situation to change."
https://github.com/intel/ProductionKernelQuilts this repository containts patches necessary to create base 3.14.55 and 3.14.64 uefi/cht-m1stable kernel tree. The same tree that was butchered by Lenovo in their OPEN_SOURCE "release".
Check this file https://github.com/intel/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/ChangeReport.md and the WW24 part in the "YT3-X90F_ENG_S100265_1601281130_WW24_ROW" will become more clear
Quilt manual: https://elinux.org/images/7/74/Maintaining_Multiple_Android_Linux_Kernels_at_Intel.pdf
If someone would be looking for a good piece to start: the best would be to recreate 3.14.55 or 3.14.64 from the quilts, use the x86_64 defconfig and build a kernel which can be booted. In order to test this, the best solution is to repack TWRP with the new kernel and do "fastboot boot" without flashing, until it boots and the touch screen is working. There's no other way i'm afraid.
I have prepared complete photo documentation of UEFI Bios, i can share, currently moving to different google photos account. Its over 300 photos.
Please, set up a Discord channel if you want to proceed. The first month will be quite boring and daunting because it's going to be build -> repack -> boot -> rant
Click to expand...
Click to collapse
In my defense, when I wrote that sentence was after taking a peek on your github profile, I figured you were just done with the Yoga Tab 3 Pro. I am really, really glad you're still trying and I recognize you are very capable of changing things for this device. I appreciate the sources you link but I am afraid I am useless as a developer, partly because of a lack of time and partly because of a lack of adequate training. I will try to help as much as I can, though. Thanks for the post.

alquez said:
No worries, however if anyone is interested how to actually crunch this one: we have a working prebuild kernel which can be pulled of boot image, and we have a working TWRP, however it looks like TWRP wasn't actually built from source, but cooked using android kitchen so we're still missing a device tree, which in my opinion is a good place to start, because you can use prebuilt kernel to build recovery and lineageos/aosp (it's deprecated but we're talking about android 6 aka cm-13.0/lineage 13.0). If I can create a most basic device tree which is capable of building recovery from scratch useing binary kernel and modules, i'd say were' good, because the next part would be adding more binary blobs from the official software, and we can skip the kernel source part for now until we have lineageos build 13 working). I started experimenting on xiaomi latte tree because it wasnt split like Z00A. It's not gonna be a proper port but it should work from now (i think)
@joesnose did you cook or compile TWRP? It's important
Ok, I'm at the stage i have two folders. The one is unpacked working TWRP, the other one is unpacked compilation i'm building, which means im able to build TWRP from source with binary kernel, but it's not working yet. The goal is make the left one look like the right one by adjusting various parts in BoardConfig.mk and copying files.. If someone has right partition sizes for BoardConfig.mk that would be really helpful, the values i calculated suck and don'y boot yet
Click to expand...
Click to collapse
Uhmmm, I've been there and took some notes with some "GNU shell Fu". What sizes are you using right now?
And regarding the WW part of the name I've noticed the recent updates are marked as WW17 opposed to WW28 which was the latest stable with any changes. Any idea why Lenovo used WW17 to update the Yoga Tab 3 Pro recently?

alquez said:
update, ive managed to boot vanilla android-x86 x64 6.0.1 build without touching the kernel yet and different TWRP (3.1.1.0) with kernel swap
Click to expand...
Click to collapse
Geez, I was excited because I read Ubuntu booted on this hardware but then I realized it was the Yoga 3 tablet but not the Yoga Tab 3, goddamnit. Keep up the good work!

alquez said:
Um Ubuntu 20.04 boots with working accelerometer so the screen rotation works + wifi, and probably audio i forgot to play youtube video, the stuff missing is battery, touchscreen and projector.
To test it you need to connect a usb hub using usb otg, put ubuntu and a keyboard in the hub, boot, and press f2 really fast if you haven't enabled slow boot yet. You can even boot
Xubuntu to ram and remove flash drive. It's a pc architecture after all and most of the processor related stuff is in the linux mainline since 4.11
Recently i was checking why the Windows 10 installer crashes on ACPI Error.
Click to expand...
Click to collapse
Oh, I will have fun doing this kind of stuff at the end of the year. It must run swiftly with i3, provided you won't get touchscreen support.

alquez said:
Geting TS and a battery running is a mandatory, the next is the projector. The rest is pretty much working. I'm building generic celadon x86 atm and the beast is huge it's like 18% now after two hours on -j8 on i7. Maybe we can give this old monster a new life
edit:
And i need to add 480gb drive ;/
Code:
/dev/sdc1 229G 210G 6,7G 97% /home/android
Click to expand...
Click to collapse
I am afraid those are the peripherals that will keep you in 3.14.55/64 Linux, at least for a while , unless you know something more (wouldn't be surprised).
Are those GB for source code or for cache? Both? Jesus... the thing is huge but reading the unpacked boot.img makes much more sense now.

It was ionioni who made the twrp for the device. I dont have the foggiest how he did it.
---------- Post added at 01:23 AM ---------- Previous post was at 01:18 AM ----------
Wow! I missed lot, looks like you have made some serious progress here. very well done.

alquez said:
I contacted my friend and he told me to compare these two folders:
https://github.com/alquez/lenovo_yt...l/cht/arch/x86/platform/intel-mid/device_libs
https://github.com/torvalds/linux/tree/master/arch/x86/platform/intel-mid/device_libs
the new files in "lenovo tree" are the modules we're after, mostly and it's a place to start
I need to ask inioni about twrp.
Click to expand...
Click to collapse
I will guess it was ported from the Yoga Tab 2. I will edit this post soon.

alquez said:
Nice! There's big chance the modules are reused somewhere. We can compare these. I think the two folders in
https://github.com/alquez/lenovo_yt3_x90_osc/tree/master/kernel/cht/drivers/input/touchscreen
which are missing from vanilla tree are two separate drivers and one is for "any pen" driver. Can you ask someone porting modules recently
to help us refresh my memory
[edit]
I've got in touch with TeamBliss of BlissRoms , they are working on cherrytrail tree
Click to expand...
Click to collapse
Nah, I couldn't confirm it was ported. A lot of posts were removed when XDA enforced the GPL measures to its developers.
About BlissRoms, it just makes sense they are working on Cherry trail. I hope you and those guys can achieve something soon. I mean, it's a 2 GB RAM device but the display, projector and dolby audio system are worth for a better fate than Lenovo's plans.

alquez said:
4GB of ram 4 cpu cores, Hardware virtualization support, fast gpu and fast emmc memory. It's a beast, way ahead of it's time.
Click to expand...
Click to collapse
Well, I have the 2 GB RAM model, so my expectations are conservative. Anyway, don't believe I'm a hardcore user, so it's plenty enough for me, considering I won't even flash Google apps. I am now settled with Lollipop, since I need apps not getting killed by damn Doze. It is a shame how OEMs can limit a device like this one. Crond, init.d, bad zRAM, shell, even busybox... frequently the OS is crippled. I read somewhere Doze can be disabled in build.prop or something but one thing I just hate is the recents screen in Marshmallow firmware (my God, is terrible!) and can't be easily changed for something like OmniSwitch. I mean, for a mobile device you have an unusual architecture, why limit it further? Damn, I wish BlissRoms come up with a working build.
Hey, @alquez, have you tried Linux 5.7 on the tablet? I saw this article and seems like the touchscreen may work with the next mainline kernel release. I mean, right now is on RC7, should be stable enough to compile and try (I'd try it, but can't get to my workstations thanks to the virus).
EDIT: Ah... I was looking into my device and it comes with a HiDeep touchscreen (cat /dev/input/event3), the linked news is for the Goodix driver / devices. At least, I guess, it will attract others to this platform... anyway, I was wondering and also confused, shouldn't touch screen work with the hideep driver using this config already?

Thanks for the new feel.
This is great, glad to see a developer picking up this tablet. It's a fine machine with an unfortunately small user base and has never really seen any development apart from ionioni s efforts and he didn't even own one, lol.
Edit: *Thank for the new twrp * auto correct!

I love this device! For me it's the perfect device for vacation just because of the projector!
I am so happy that you guys are working on it again. the ram and display tweak works like a charme for me. Had to reset my background screen though
thx for all your help. As soon as you guys have light rom, i'll install it on my 2GB device.

hello how to flash your twrp please ?

can someone upload adb drivers for the yt3-x90f please ? because i try to flash in dnx fastboot mode but commands don't work, even "fastboot devices" don't show me the yoga tab 3 pro