This post may be helpful for:
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater,
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
Go to post 2 for the solution
Hello guys.
As the title says, I have tried to test JB(e610 model) Firmware to my LGE 615 with KDZ Updater.
The funny part is that I tried Europe v20B, which is supported for e610 and it (SEEMED) to be installed correctly. It wasn't obviously, that's why I'm here..! I had the usual " no touch " issue. The touch works ONLY after the first KDZ install, and after Hard Factory Reset for only ONE boot(and with SIM inside - If it's not it doesnt work). With the first reboot, the touch stops working.
Hence, I decided to downgrade it again to the previous version. So, I downloaded the correct firmware from LG site.
The issue is that NO other version other than v20B(Europe) for LG e610 is installed (no matter how many Roms compatible with e615 i tried).
I tried recovery from The LG Mobile Support Tool auto-update,KDZ Updater and offline installing it (Unbrick). The first 2 options give me this specific error:
Smart : wParam = 100, lParam = 1002
Step : Upgrade Error error code = 1002
Click to expand...
Click to collapse
The latter, gives me error in Connection with the phone(which I think is a bug)
The wierd thing is that v20B Europe flashing works. It seems i cannot "downgrade" it to an other version.
I thought "maybe it's because I tried e610 firmware" so I downloaded and tried older e610 firmwares but still nothing works. ONLY v20B-e610.
Of course I tried everything with disabled the LGE Usb Modem driver and with usb-debugging on.
Any suggestions?
Thanks in advance,
Moul.
EDIT: I've searched every possible solution online(Currently I'm trying to figure if LG Flashtool can do anything. Found the LG_E615.dll, but currently it says it cannot find the libusb0.dll....
Can anyone help? Maybe a link/guide for Flashtool?
EDIT 2: Ok, now I'm totally frustrated(and SCARED)... Stayed up all night and found NO solution. Tried LGMDP too, but cannot find a workaround...I tried either in Emergency Download Mode or in JB with no solution.... Is there any device compatible with e615 that i can use from LGMDP's devices??? KDZ still gives me the "1002" Error(Except of V20 Firmware).........
Am I at the wrong forum btw?*
If anyone knows any solution or has any abso-freaking-lutely ideas what I can do(Because I mine have ended).... PLEASE HELP!! :crying:
Please help..!!!!
Click to expand...
Click to collapse
KDZ Updater - Error 1002
Finally fixed it!!!
I installed downgraded CrossModel Firmware, and now my E615 has a E615 Official Rom.
As I said on the first post, there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for E610 - Europe) , so I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/ProgramData folder.(In Windows XP it's in C:\Documents and Settings\<your account name>\Application Data\)
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) I did the following steps:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extracted the -working-E610/V20.kdz and the E615/ V10.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and renamed the extracted E615v10.dz same as E610v20.dz.
5. I started the KDZ update, choosing the working V20, and when the e610v20.dz file was extracted, I replaced it immediately with the (now renamed as "e610v20.dz") E6150v10.dz.
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace then it then.
Wierd issue from LG, but it worked for me!
Cheers.
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
MeGaViC said:
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
Click to expand...
Click to collapse
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
I was thinking "I won´t be able to try other roms anymore" but with your solution, I WILL!!!, hehehe...
35 hours awake?... problems like this takes sleep away...
Thank you again sir...
Regards..
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
hassan216 said:
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
Click to expand...
Click to collapse
You upgraded via KDZ Updater? Or by the in-phone updater?
If you upgraded via KDZ, you follow the same steps as the second post. The .dz files that you will need to replace are in the c://appdata/lgmobileax folder (on Windows 7 and with "show hidden files and folders" option ON).
If you didn't update via the LG KDZ tool , you just have to find a working (one that can get installed) firmware from HERE. I think it's better to download a Jelly Bean(V20) one, since you wont have problem installing it propably.
Try, the things above, follow the steps on second post carefully and tell me what happened.
Cheers,
Moul.
i have updated through kdz and i do the same steps as i updated but it gives me errors ..i will try the way you mentioned in post two ...its too complicated when i read it i didnt understand anything but i will try and tell you if i need assistance ..thank you mate
I can confirm that it works on lg l5 e610.
I succesfully flashed from v20c to v10l.
Brilliant!!
This worked for me!!
I tot my Ph was almost Bricked.. was searching for a solution but did not get it anywhere...
Finally this fixed the issue..
Thanks Mate..
Thanks a million..
Thx a lot! Worked like a charm! :good:
i flash e612 with rom of P705, now the phone bricked. want to flash back. try to use this mothod, need to replace the "dll" file too?
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
moulwxtos said:
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
Click to expand...
Click to collapse
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
quiorra25 said:
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
Click to expand...
Click to collapse
Did you try the workarounds below?
moulwxtos said:
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace it then.
Click to expand...
Click to collapse
ilovelg4ever said:
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
moulwxtos said:
Did you try the workarounds below?
Click to expand...
Click to collapse
Hey moulwxtos,
I managed to figure it out. The problem was with the version of KDZ updater I was using. For some reason I couldn't replace the renamed .dz file when using the original KDZ Updater because it kept giving me something about permission errors. When i changed to the KDZ Updater with offline fox (UpTestEX_mod2_marwin) it worked flawlessly. My phone's back to normal. Many thanks mate
ilovelg4ever said:
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
please some video how to replace the generated file of UpTestEX_mod2_marwin,
because i cant it say file in use or i cant cancel the generated, and even unplugin the cable, impossible
Right Now at 2017. We can fix the "Error 1002" or the update tool stops at 4%. of th
Right Now at 2017.
We can fix the "Error 1002" or the update tool stops at 4%. of the KDZ Update tool (I did with LG E615)
This way:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Download a firmware stock version V10x_00 compatibly with your Phone ( From lg-firmwares)
5. With LG Flash Tool 2004 do downgrade from V20 to version Base V10, you just have to choose the V10x_00.kdz
6. I started the KDZ update NORMALLY and just Wait.
maybe later you can install the version V20D
Related
Yesterday, i try something with my phone
first my phone in FW V20a taiwan + root, next i want to flash it with FW V20a CIS +root+ CWM + deodex
after that KDZ has an error
here's a picture
Now i stuck in emergency mode!!. i have waiting for it. and still nothing.
I've tried to flash it again. and still stuck in emergency mode.
Can someone fix this problem?
or i must go to LG SERVICE CENTER?
sorry for my bad English
thanks before :cyclops:
I had this problem before, where my phone was stuck in emergency mode. I flashed it by following the instructions in this zip I found on a french android forum. www4. zippyshare .com/v/61483915/file. html (remove spaces)
d3rpmcherp said:
I had this problem before, where my phone was stuck in emergency mode. I flashed it by following the instructions in this zip I found on a french android forum. www4. zippyshare .com/v/61483915/file. html (remove spaces)
Click to expand...
Click to collapse
hmhmm ok ok , i'll try it
thanks :good:
d3rpmcherp said:
I had this problem before, where my phone was stuck in emergency mode. I flashed it by following the instructions in this zip I found on a french android forum. www4. zippyshare .com/v/61483915/file. html (remove spaces)
Click to expand...
Click to collapse
i still confused in tutorial
that caled "7. Clear Phone Software update registry, Select "Different Country" and select your Language. Click <OK>" ?
where must i click?
pembukaan said:
i still confused in tutorial
that caled "7. Clear Phone Software update registry, Select "Different Country" and select your Language. Click <OK>" ?
where must i click?
Click to expand...
Click to collapse
i.imgur .com/ICSWOEB.png (remove space)
If you don't see this screen click this icon so it's on
i.imgur .com/YXXtsXN.png (remove space)
d3rpmcherp said:
i.imgur .com/ICSWOEB.png (remove space)
If you don't see this screen click this icon so it's on
i.imgur .com/YXXtsXN.png (remove space)
Click to expand...
Click to collapse
okay i'll try it
same problem here, tried to flash the newest stock rom on my gf's l7 p700 fail and now im stuck on the emergency mode.. hope it helps :crying:
Soundwavex3 said:
same problem here, tried to flash the newest stock rom on my gf's l7 p700 fail and now im stuck on the emergency mode.. hope it helps :crying:
Click to expand...
Click to collapse
Only solution for me was to flash using LG Emergency Recovery
The offical LG update tool saved my life, it restored it
Xperia Arc S [lt18i]
ROM: latest FXP CM10
Kernel: Fusion Kernel 5.1
-
SIO | Smartassv2 | 0.2 - 1.6 gh
Thank you!
Thank you so much! My phone works again after a week of trying a lot of things
I was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised by my PC. Please Help.
pembukaan said:
okay i'll try it
Click to expand...
Click to collapse
Yeah so I had the same issue and tried this method, but i am not sure I got the right LG update software. Where do i download it from?
Also, when im running this, despite me running the little server the LG update thingy still connects to the internet and downloads a kdz, which fails to be installed on the phone.
I am trying this on a vista computer, will try on XP to see if results change.
My problem solved
before flashing use should care about alternate program running instead of KDZ upgrade tool, also need P705 dll files
i also stucked in Emergency mode i check Device Manager\Modem disable it and put P705 dll files and work nice
i also tell that we want better stable program instead of LG KDZ upgrade tool
pembukaan said:
Yesterday, i try something with my phone
first my phone in FW V20a taiwan + root, next i want to flash it with FW V20a CIS +root+ CWM + deodex
after that KDZ has an error
here's a picture
Now i stuck in emergency mode!!. i have waiting for it. and still nothing.
I've tried to flash it again. and still stuck in emergency mode.
Can someone fix this problem?
or i must go to LG SERVICE CENTER?
sorry for my bad English
Click to expand...
Click to collapse
---------- Post added at 03:22 PM ---------- Previous post was at 03:06 PM ----------
that's great worked fine what i do, i don't know but it works fine
QUOTE=Nickyyoh;41893490]Thank you so much! My phone works again after a week of trying a lot of things [/QUOTE]
rebirth
For those that can't get the kdz thing to work, here's a link to the procedure that saved my LG-P700 from the emergency mode locking :victory:
androidforums. com/eve-all-things-root/81055-stuck-in-emergency-mode-cant-use-lg-support-tool. html
Hope it helps someone
I have LG L7 P705 v10e and recently update to v20a with Rusian kdz.
It doesn't working smooth with My LG, so i wanna back to stock firmware and try using cm10.
I try to instaling v10e, v10k, v10k (blackedition) with english kdz but it cannot detect My phone or error in extracting.
Some other also have the same issues..
Please anyone who mastered this stuf helping and give any solution to Me and others..
Thank You
gefademe2d said:
I have LG L7 P705 v10e and recently update to v20a with Rusian kdz.
It doesn't working smooth with My LG, so i wanna back to stock firmware and try using cm10.
I try to instaling v10e, v10k, v10k (blackedition) with english kdz but it cannot detect My phone or error in extracting.
Some other also have the same issues..
Please anyone who mastered this stuf helping and give any solution to Me and others..
Thank You
Click to expand...
Click to collapse
What error does it show? Lparam error? Can you post the log? (There is an option to save it).
moulwxtos said:
What error does it show? Lparam error? Can you post the log? (There is an option to save it).
Click to expand...
Click to collapse
Thank You for responding My Issues..
Heres the log
14:15:23 : Launching SW update
14:15:23 : Unpacking KDZ
14:16:21 : KDZ file extraced
14:16:39 : Files were extracted.
14:16:39 : LGMobileDL Load.
14:16:39 : Port = -1
14:16:39 : Connecting to phone
14:16:39 : PHONE WAS NOT FOUND!
14:16:41 : ===FINISHED===
Phone was detected by MobileGo but LG PC suite and KDZ was not found my phone.
I try for DIAG, CS_Emergency and also when it on Emergency Mode (yellow screen)
All do nothin.
I Found anyone talking that v10k which can replace v20a
I'm running windows 7 64bit. Is that a problem with EN_KDZ?
gefademe2d said:
Thank You for responding My Issues..
Heres the log
14:15:23 : Launching SW update
14:15:23 : Unpacking KDZ
14:16:21 : KDZ file extraced
14:16:39 : Files were extracted.
14:16:39 : LGMobileDL Load.
14:16:39 : Port = -1
14:16:39 : Connecting to phone
14:16:39 : PHONE WAS NOT FOUND!
14:16:41 : ===FINISHED===
Phone was detected by MobileGo but LG PC suite and KDZ was not found my phone.
I try for DIAG, CS_Emergency and also when it on Emergency Mode (yellow screen)
All do nothin.
I Found anyone talking that v10k which can replace v20a
I'm running windows 7 64bit. Is that a problem with EN_KDZ?
Click to expand...
Click to collapse
About phone not being detected:
1. Be sure you have done all steps correctly(Correct Driver installation,especially model specific drivers if you can find // installed msxml.msi-if you haven't already, find it, install it and restart- // having windowsenabler.exe running and - On ) before starting the procedure.
2. You should also disable the LG modem driver.
3. I also propose doing the flashing in Emergency Download Mode and without the battery.
The above are mainly for the phone to be detected.
You said you had other problems too. What errors do you occur to? You have upgraded to v20b and cannot ... downgrade? V20b worked? Are you able to re-install it?
moulwxtos said:
About phone not being detected:
1. Be sure you have done all steps correctly(Correct Driver installation,especially model specific drivers if you can find // installed msxml.msi-if you haven't already, find it, install it and restart- // having windowsenabler.exe running and - On ) before starting the procedure.
2. You should also disable the LG modem driver.
3. I also propose doing the flashing in Emergency Download Mode and without the battery.
The above are mainly for the phone to be detected.
You said you had other problems too. What errors do you occur to? You have upgraded to v20b and cannot ... downgrade? V20b worked? Are you able to re-install it?
Click to expand...
Click to collapse
I've done the list on #1 and #3 but I didn't on #2.
Will try again today..
Hope I can make it!
Yeah..another issues is still on v20a, it also made a mess when updating to CM10 (latest update) NO RADIO SIGNAL (just like other said), and some game not working properly with stock v20a (Real Racing always force to close, smoother when i'm using v10f france+CM10).
The big point is My LG L7 with CM10 still smoother even it still not in alpha.
gefademe2d said:
I've done the list on #1 and #3 but I didn't on #2.
Will try again today..
Hope I can make it!
Yeah..another issues is still on v20a, it also made a mess when updating to CM10 (latest update) NO RADIO SIGNAL (just like other said), and some game not working properly with stock v20a (Real Racing always force to close, smoother when i'm using v10f france+CM10).
The big point is My LG L7 with CM10 still smoother even it still not in alpha.
Click to expand...
Click to collapse
I meant upgrading issues.
If your only issue is that your phone is not connected that's the easy part and you don't have to worry. There's no driver that cannot be found and correctly installed ....! :
moulwxtos said:
I meant upgrading issues.
If your only issue is that your phone is not connected that's the easy part and you don't have to worry. There's no driver that cannot be found and correctly installed ....! :
Click to expand...
Click to collapse
Me and You just solve it!!
Thanks maan..
You helping me from the first time and this far..
Well..the latest problem is on the KDZ.
The Rusian created that v20a for reason and just special v10k (Rusian and France people create this one) that can unlock v20a (i tho soo)
And I download this
Then instal it normaly..
Walla..stock came back.. CM10 on the go
gefademe2d said:
Me and You just solve it!!
Thanks maan..
You helping me from the first time and this far..
Well..the latest problem is on the KDZ.
The Rusian created that v20a for reason and just special v10k (Rusian and France people create this one) that can unlock v20a (i tho soo)
And I download this
Then instal it normaly..
Walla..stock came back.. CM10 on the go
Click to expand...
Click to collapse
That's good, glad I could help!
Cheers mate,
Moul.
HELP
i have the l7 p705g i had v10e_00 and i upgraded to v20a_00 now i lost my bootloader and i cant go to emergency mode please help me
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!
Hi guys
I know its a long shot to expect a reply on here with a Korean G2 but......
Does anyone know where i can download the 4.4.2 firmware (TOT file) and dll for the G2 F320K ?
I've just managed to update the phone to 4.4 using the TOT method and root it with iroot but ive just seen there's a 4.4.2 update but i cant find the TOT file for it anywhere
Thanks ;(
Anyone ??
I've not had one reply on here to any of my threads
Bulldog666 said:
Anyone ??
I've not had one reply on here to any of my threads
Click to expand...
Click to collapse
hello , why u want TOT file ? u can download .kdz file and its available in many websites
android_for_all said:
hello , why u want TOT file ? u can download .kdz file and its available in many websites
Click to expand...
Click to collapse
Thanks for the reply (its the first one I've had on this forum)
I've found a few 4.4.2 kdz files but every method I've tried to use to flash them either results in them getting stuck at 49% (47% on the computer) or a softbrick.
The only way I managed to go from 4.2.2 to 4.4 was by using the TOT method.
I just cant find a tot file for my f320k
Bulldog666 said:
Thanks for the reply (its the first one I've had on this forum)
I've found a few 4.4.2 kdz files but every method I've tried to use to flash them either results in them getting stuck at 49% (47% on the computer) or a softbrick.
The only way I managed to go from 4.2.2 to 4.4 was by using the TOT method.
I just cant find a tot file for my f320k
Click to expand...
Click to collapse
hey
last week ive returned my lg g2 to stock firmware using a .kdz file without any issues .so r u sure that u did all the steps correctly? u should check these threads http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
http://theunlockr.com/2013/11/01/unroot-lg-g2-versions-video/
just do them step by step
ps i prefer the unlockr thread its simpler than the first one
android_for_all said:
hey
last week ive returned my lg g2 to stock firmware using a .kdz file without any issues .so r u sure that u did all the steps correctly? u should check these threads http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
http://theunlockr.com/2013/11/01/unroot-lg-g2-versions-video/
just do them step by step
ps i prefer the unlockr thread its simpler than the first one
Click to expand...
Click to collapse
Thanks again for the reply
I've tried those methods an it gets as far as loading the support tool and everything look like its working with the % going up, but then it gets stuck at 49%.
I've looked on some forums and this seems to be a common problem but I've tried all the solutions posted and none of them work.
The only way I'm then able to bring the phone back to life I'd by using the TOT method.
I'm even having trouble installing a recovery as they all seem to boot me into a black screen
I just tried it again and it seems that when it gets stuck at 49% it give this error:
Indirect Internal / PC to Phone send start
FIXED
For anyone else having this problem then just use these settings instead:
in RD test tool, choose: CDMA instead of 3GQCT
CS emergency instead of diag
then click on CSE web upgrade test instead of normal web upgrade test.
That should stop you getting stuck at 49%.
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Meppolan said:
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Click to expand...
Click to collapse
Thanx
The phone was sold as NEW and not Refr.
It was in Genuine box, with Genuine Chrager (and even manual)
Though it might be fraud...
I talked to the seller, and i am sending it back to him
Hopefully he will fix it/replace it
If not i will send him you link..
I think i'm having exactly the same problem with you T_T
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
[email protected] said:
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
Click to expand...
Click to collapse
You can flash with the TOT, you just need to edit the TOT file in a Hex editor and change the model to what you have (LS980). Look at my post here on how to do that.