Related
First of all I know screen freezing is a common problem that's not solved yet, but I really can't hold it any any any any more...
I got my HD2 just several days before(not t-mobile edition), now I'm using mattc 1.6b with 2.12 radio. Already replaced the original PPP with RMNET.
I don't know how about your situation, but my screen freezes about every 5 minutes, about 20 seconds a time, and if I turned my GPRS on(I'm not using 3G yet), it freezes almost EVERY 5 SECONDS... It's crazy
I can barely use my HD2 now, if there is no network connection, what could I do? I really don't know how to do, could somebody give me any advices?
It's a well known issue related to the G-Sensor. I can only recommend turning off screen rotation and trying other Android builds.
Edit: Here's a good thread to look at too, maybe one of these solutions might help you out. (link)
Thanks a lot, I'll try it.
try to boot the andoird as soon as you boot the WM it did help me or that issue
I was experiencing freezes with chunky droid, last night I changed to the latest vbn rom (full rom) (says he cooked in the power and performance tweaks) booted it calibrated g sensor, booted android no more screen freezes.. Using mattc 1.5c.. I didn't change my andoid rom..
Sent from my HTC HD2 Android
I am using the same rom. Infact the last few roms I tried I never experienced screen freeze - it works seamlesslessy perfect. It could be your SD card. Reformat it and reflash again
all the advice you need is in the thread for your build ...i promise
fineday2 said:
First of all I know screen freezing is a common problem that's not solved yet, but I really can't hold it any any any any more...
I got my HD2 just several days before(not t-mobile edition), now I'm using mattc 1.6b with 2.12 radio. Already replaced the original PPP with RMNET.
I don't know how about your situation, but my screen freezes about every 5 minutes, about 20 seconds a time, and if I turned my GPRS on(I'm not using 3G yet), it freezes almost EVERY 5 SECONDS... It's crazy
I can barely use my HD2 now, if there is no network connection, what could I do? I really don't know how to do, could somebody give me any advices?
Click to expand...
Click to collapse
Reformat ur sdcard with SDFormatter V2.0, will solve ur problem...
remove the setCPU app and disable screen rotatation if you don't use it, i have no screen freeze at all after that
Yea. The setcpu gave me a lot of freezes too...
ok screen freezes is a known issue, and we do not need another thread on it.
Peace,
Josh
Hi new to hd2 android. I have tried multiple roms and and droid builds ,but the problem I am having is after I format my sd card with the sd formatter that I was recommended I transfer the android build to it let it boot up. After that I reboot it and set everything up ,and 99% of the time I will set the phone down and when I go to pick it back up I hit the power/end button to turn on the screen and I get no screen I just get buttons lighting up. Is there anything that I am not doing or doing that is causing this. Please help. I am no stranger to electronics as I modify about everyone of them that I own ,but I can't crack this one. I've been working at it for over a week keep getting the same result. If anyone can help me I would greatly appreciate it. Thanks in advance
vdubbri said:
Hi new to hd2 android. I have tried multiple roms and and droid builds ,but the problem I am having is after I format my sd card with the sd formatter that I was recommended I transfer the android build to it let it boot up. After that I reboot it and set everything up ,and 99% of the time I will set the phone down and when I go to pick it back up I hit the power/end button to turn on the screen and I get no screen I just get buttons lighting up. Is there anything that I am not doing or doing that is causing this. Please help. I am no stranger to electronics as I modify about everyone of them that I own ,but I can't crack this one. I've been working at it for over a week keep getting the same result. If anyone can help me I would greatly appreciate it. Thanks in advance
Click to expand...
Click to collapse
It would help if you added your WinMo ROM/Radio and the Android build this is happening with?
Sorry I am running the elegancia gtx right now with the froyostone sense 3.1.7 and the 2.10.50 radio ,but it has done it with numorous builds
Me too
I have the same problem and i have tried several different builds and am running chuckyRom
I have tried the chucky rom and the ozdroid rom as well with almost every single android build that is half way decent. This sucks I would love this phone to be up and running good. Now I did have the combo of chucky rom with the same radio I have now with the hyperdroid 1.6 and it ran for a few days with no problems ,but the darn battery died quick. I haven't been able to get it to work properly since.
Hit the phone button it will wake up faster
Sent from my HTC HD2 using Tapatalk
The problem is its not turning the screen on at all. No matter what button I hit.
vdubbri said:
The problem is its not turning the screen on at all. No matter what button I hit.
Click to expand...
Click to collapse
U have advanced task killer installed?
Sent from my HTC HD2 using Tapatalk
I'm having the same issue, and yep, Advanced Task Killer is installed and running.
same here
i am having all those same problems and i have tried it with and without ATK
I do not have task killer installed not any version of any of the task killers. If a android build has it in it I go in and uninstall it.
Try changing your sd card. I saw some cards (such as team branded) exhibit that behaviour.
Same problem here tried changing the SD card and same thing happens.
Might have found a fix for this for now. All I did is turn auto rotatescreen in android display settings hope it works for you guys.
I have just started using the newest Energy rom with tmobile usa radio and I was getting the black screen of death. After a bunch of messing around I set it to the compact start menu and turned off sense in windows mobile home options and now the problem went away. YMMV
In the middle of reading all the posts here yestarday I glanced at motoman234's sig and I decided to try his setup and so far twelve hours later still no black screen of death. I don't know if it was my winmo rom that was causing it for me or the radio I was using ,but so far so good. The touch screen seems a little laggy which I wish wasn't there ,but again happy to have a setup that is stable.
First of all, sorry if this thread is out of place, but I'm not sure where else to turn.
My HD2 worked terrifically with FroyoStone 3.2, Hastarin 7.6 up until last Wednesday (5 days) ago. Then I started to experience, and have not been able to fix, serious TS lag issues.
Symptoms: I hit the unlock button, swipe to unlock, and the touchscreen will be responsive if I KEEP using it...if I pause for up to 3 seconds, the screen is no longer responsive. I have to relock the phone, unlock, and then swipe again to get it to work.
The touchscreen works perfectly fine in Windows Mobile 6.5. (Energy 2361X)
Attempts to fix: I've formatted the SD Card inbetween trying all of the following items-
1) Switch to MDJ ROM with MDJ kernel
2) Switch to Bluetopia ROM (0.5, 0.6 & 0.6.1) with Hastarin 8.0 OR 8.1
3) Switch back to FroyoStone 3.2 with kernel that comes with it
4) Update Radio ROM
5) Update to new Energy WinMo ROM -- after running Task 29 first.
Today, I purchased a new SD Card, loaded it with a clean install of Android, still have issues.
Also tried:
1) Turning off all LED notifications
2) Disabling Auto brightness in WinMo and Android
3) Disabled Screen Auto-Rotate
Honestly, I'm all out of ideas, and I hope someone in the community has a way to help out. I find it so odd that the touchscreen works great right after a "wake-up" as long as I keep it constantly stimulated...then fails to respond if I let it sit for more than three seconds. Is this a polling issue?
All ideas are appreciated. Thank you
This probably belongs in the Q&A forum, not development.
Moved.
For future Googlers and the sort who are researching this issue, the thread has been placed here:
http://forum.xda-developers.com/showthread.php?t=833068
Thanks.
Hi
I have a HTC HD2
and i installed andriod nand rom on it with the following things
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.12
i installed almost 10 andriod roms and find the same problem
after making or receiving a call screen goes into black screen and hangs up. i have to reboot the device by removing the battery. i would appreciate if any one can provide me the solution to fix this problem as i love andriod roms.
thank you
mohammedmazher said:
Hi
I have a HTC HD2
and i installed andriod nand rom on it with the following things
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.12
i installed almost 10 andriod roms and find the same problem
after making or receiving a call screen goes into black screen and hangs up. i have to reboot the device by removing the battery. i would appreciate if any one can provide me the solution to fix this problem as i love andriod roms.
thank you
Click to expand...
Click to collapse
I am facing this only when battery is bellow 15%. If this is the case then just charge it before it goes to 15%.
If that's not the case then you can try installl MAGLDR v1.3
Do you have this issue in Froyo or Gingerbread ROMs? or in both? What version of CWM are you using?
I have the same problem on MIUI since after approximately 1.3.18 (cutover from Froyo to Gingerbread). Also have this problem on CME DHD2 Compact.
It is also an issue if someone tries to call me.
Sometimes, if I try waking the phone from sleep (power button) and it hits the black screen, and I wait long enough, it will wake. But again, the only real fix I know is pulling the battery.
I am running MAGLDR 1.13
Also, another fix that works sometimes is plugging in the phone into a power source e.g. laptop USB port
It's something about light sensor, when you put your screen into a strong light it would be turn "unblack" again. I don't know how to fix it, is this a problem with this hardware because it's broken or my version of LEO doesn't support NAND full functionaly.
Begging for answer!
i know about my poor english
I have this problem too.. running latest Hyperdroid rom by pongster (magdlr version) and it's driving me crazy. Sometimes phone wakes up normally after a call like it shoud, sometimes is stuck with black screen for few minutes, hours even (although i can't wait that long so i pull out battery)..
Back on WinMo everything worked normally, so it's not an hardware issue with proximity/light/whatever sensors
Is there any fix out yet? I googled and searched this forum a lot and haven't found nothing much helpful, ony a couple of threads with bunch of people with same problem like me. An option for disableing those sensors would be just as good, i've tried few apps for keeping the screen awake and none of them actually worked..
Any help is appreciated.. thanks in advance.
Bump!
Anyone? :/
I have the same issue - running Gingerbread, MAGLDR 1.13
Very annoying cause everything else works super.
Temporary solution i use is to use headset / handsfree. Then there is no problem.
So experts on XDA, we are begging for a fix for this!
I have the same issue since first Android roms and never found a real solution for the problem.
Instead i found a bypass that works for me reasonably well (99% of the cases the screen turns on after a call).
I installed the following 2 applications that wakes up my screen after the call (install then enable each one):
1. Screebl - https://market.android.com/details?id=com.keyes.screebl.lite
2. Modified version of SpeakerShake - http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
I suspect this issue is somehow related to hardware failure in light sensor. Installing these programs solve this problem for me.
Also take a look on the following thread:
http://forum.xda-developers.com/showthread.php?t=835127
I have had the same thing happen to me but only around 2 or 3 times in a about 3 months of usage. Had it on both CM7 and MIUI Gingerbread ROMs regardless of battery percentage.
MAGLDR 1.13
Some users experience this using SetCPU
if you have a profile for screenoff and it's set to the lowest frequency, try to set the frequency to something above 500 MHz.
If you have smartass set as governor, then even setting the frequency to it's highest (without OC) during screenoff wouldn't change anything in battery performance, but the device will wake up faster.
Your setup works for me as well - until we`ll see a fix for it this will do
Quiethinker said:
I have the same issue since first Android roms and never found a real solution for the problem.
Instead i found a bypass that works for me reasonably well (99% of the cases the screen turns on after a call).
I installed the following 2 applications that wakes up my screen after the call (install then enable each one):
1. Screebl - https://market.android.com/details?id=com.keyes.screebl.lite
2. Modified version of SpeakerShake - http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
I suspect this issue is somehow related to hardware failure in light sensor. Installing these programs solve this problem for me.
Also take a look on the following thread:
http://forum.xda-developers.com/showthread.php?t=835127
Click to expand...
Click to collapse
Yup, this worked for my setup to - thanks!
hi guys ! i can`t realy figured out how to set it . shall i use only one app or both ? and wich settings should be ?
xanthrax said:
hi guys ! i can`t realy figured out how to set it . shall i use only one app or both ? and wich settings should be ?
Click to expand...
Click to collapse
(install then enable each one):
Click to expand...
Click to collapse
Incearca Sanity app, cauta pe Market, mie aceste doua nu mo ajutat
with me is so but only if I navigation (Navigon) and to have someone call me and then left the screen black and I can not make
try to change the kernel. that works for me
hey guys! i found the solution goin through the market!
download an app called "Sanity" theres a free version in the regular android market.
go to the settings > general > check "Reverse Proximity" (This will give you some warning about not using it if you DONT have a buggy proximity sensor). Check it anyways. Then go back to preferences then click "Proximity" scroll down and uncheck Turn off screen and leave leave the Turn on screen checked. this will force your phone to stay on during calls so that it never has to go through the proximity phase of calls this no more black screens. Hope this was helpful ^_^
Thanks!
I had this problem aswell. MIUI & Cyanogen mod were the ROMs I was using, and this problem started occuring after a few months use (my screen is also damaged from a fall, so maybe the sensors are a little damaged as well).
When I installed the WinMo 6.5 stock ROM again, everything was normal, except that my screen still turns black during calls BUT I can activate it again by pressing the power button.
Now I installed android again and the Screebl app (enabled it) and I have the same functionality! The only problem that remains is that my screen still turns black during calls, so I have to answer with the phone button and putt down phone with the power button. Still beats having to remove the battery though .
If someone has a fix for the black screen, it would be more than welcome!
But, thanks a million for the Screebl app tip! I can use my phone again .
papaganz said:
Thanks!
I had this problem aswell. MIUI & Cyanogen mod were the ROMs I was using, and this problem started occuring after a few months use (my screen is also damaged from a fall, so maybe the sensors are a little damaged as well).
When I installed the WinMo 6.5 stock ROM again, everything was normal, except that my screen still turns black during calls BUT I can activate it again by pressing the power button.
Now I installed android again and the Screebl app (enabled it) and I have the same functionality! The only problem that remains is that my screen still turns black during calls, so I have to answer with the phone button and putt down phone with the power button. Still beats having to remove the battery though .
If someone has a fix for the black screen, it would be more than welcome!
But, thanks a million for the Screebl app tip! I can use my phone again .
Click to expand...
Click to collapse
I also try with WinMobile and the problem was still there ...
I think the sensor is broken ....
I will bring my phone to service ... and when i take it back I will tell you whether it is repaired
Solution
I had the same problem with Android roms on my HD2. I saw in an other thread a member (z-o-r-r-o-, thanks btw) wrote "just clean dust on the screen, where sensor is situated". This looked like a joke to me, but it's not. On a review of the phone I found the place of the proximity sensor. This is on the top of your screen next to the speaker, on the left if you look at the screen. I just took off the protection layer of the screen and cleand the sensor and the problem was solved. So I cut of a bit from the protection layer so that the sensors arn't touched by anything.
I think the problem is that this sensor is much more sensitive with android roms.
Hope this works for you to.
Hi, I have a continuing problem with any Windows 7 ROM after 7.5 (haven't tried earlier versions).
I am currently running the excelent Pdaimatejam Rom Wp7.8 ROM BUT on a number of occasions with this and the 7.5 of the same name when the phone gets low on charge (this is my assumption as it only happens when i am on a night out and late home).
The phone will reboot to the magldr screen (because I have had issues in the past i have now set this to stop here rather than endlessly reboot)
It doesn't seem to matter what I do from this point - I have tried all the fixes I have been able to find on the site but with no solution. If I get it to boot into Windows it will get as far as the "Windows 8" screen then go black and reboot. The only way to get back up and running is to reflash the ROM again obviously losing and texts, pictures etc I have taken since the last backup, this also means I have to add all my apps, re-authorise etc etc.
I have got the phone dual booting so i can actually use Android when this happens but I much prefer to run Windows and would love a fix if anyone has one.
Cheers
Rebooting Windows 7.5 or 7.8
Hi,
Am I the only person experienced this issue, has no-one got a soultion ?
Cheers
175 views so looks like others must be interested in a solution