No network Available - Galaxy S I9000 General

I just flash gingerbread on my galaxy s once rebooted it doesnt recognize my network, I make a network scan but my network Claro Puerto Rico dont appear.
Any guess or help??

Check your APN settings, if backed up, restore, reboot
Sent using TCP/IP

Check your csc code by either
Download nitrality from market and then go to tools
or type *#272*your imei#
Changing csc will factory reset your phone..

@ Talon: since Spetember edition, *#272.... is not making factory reset, just reboot.

spamtrash said:
@ Talon: since Spetember edition, *#272.... is not making factory reset, just reboot.
Click to expand...
Click to collapse
You mean 2.3.5 onwards? ok thanks for letting me know.
Best to warn just in case though may not be on the latest yet

Yep, tested recently with JVR... no factory reset anymore
making things easier, isn't it?
EDIT:
originated from Click
I tried it on JVR, stock, odexed... worked without FR (speedmod kernel). Cf kernel, deodexed Ramad's ROM - worked without as well on JVS.
I'm not sure if some customized kernel/ROM will not cause the FR...

I just went to the phone company and they flashed from froyo to gingerbread 2.3.3 but still having problem the data icon stay still on letter E and start to flash on and off constantly.

When E flashes, it means, that EDGE network is available, but phone cannot connect to it. Usually, it means problems with APN settings.
Go to Setings - Wireless Networks - Mobile Networks and Access Points. You shall have some access points available. If not, try to ask your operator to send you setup sms or try so search on internet to find the setup rigth for your operator.
Sent from my GT-I9000 using XDA App

Related

No data connection after rooting to custom rom (Darky's v5.6)

I'm new to flashing custom roms and what not. I used odin and flashed everything to the point, csc, modem,pda,pit the rom works awesome but i cannot for the life of me connect to the internet. the 3g icon or h icon wont' show up. in the status it says my network type is gprs and i'm roaming and my mobile network state is disconnected.
I'm with fido, the phone is unlocked i have never had trouble with data or anything until i flashed to a custom rom.
Anyone have the same problem or suggest how to fix?
Data Conn. Issue
Hey mate,
Have you gone into 'Settings', 'Wireless and Networks', 'Mobile Networks' and then 'APN settings' and entered your appropriate settings?
That should fix it if you define the correct access point.
Alex
hey man, yeah i did all that stuff, went in there, found my carrier, put in all the apn settings i can find and still nothing. when i put data roaming on then i get data and the edge icon comes up.
Hey dude,
That sounds strange, flashing custom (or even release) roms is never a guarantee especially with weaknesses in the way that ODIN communicates with your phone, What I would do is Re-Flash your stock rom through ODIN then use the "quick" install method from Darkyy.
I am running 5.6 like you, and I had issues doing it through odin (I kept getting random FC's), additionally, the rom; if installed from CWM will keep your apns and apps e.t.c. along with many settings and configs from the base rom you're using before the flash.
That is the best advice I can give you.
Alex
My config is a follows:
I9000 International
16gb SDHC
500HZ Hardcore Kernel
Darkyy 5.6
Whats the process for reverting back to stock 2.1 eclair rom?
Did you keep a record of your firmware version before reflashing?
If not, you may have to ask someone on here what your base firmware was.
Are you familiar with using ODIN? (The software used for reflashing)
Alex
I am having same issue to...I used 5.4 from Darky and it works well...same with DocRom 4.0 works and the next 5.1/6.0 don't work.
Both Darkys and DocRom are based some JPX....which seem to be root cause..
I've have the same problem. Tried eveything but still didn't work. So went to Samsung Service Centre to have my SGS firmware refresh. I notice after the refreshed same issue of data com missing. Told them and they when into the SGS to select the telco operator setting selection. Now data com. working well. Anyone know the SGS handset setting code? I want to reload to Darky's v5.6 again.
hi folks
i have the same problem... my provider is a virtual provider in the network of our biggest provider here in austria. i was using doc's rom based on xwjpa firmeware and everything worked fine without enabled roaming options.
since doc's rom is based on the newer releases (xxjpx, xxjpy) i' only able to use data connection if i turn on roaming. it also shows me that i'm in a roaming network. i guess the cause are the xx firmwares. xw and xx are european firmwares but i do not know the differences between them. maybe someone has more information about the differences? currently i'm using xwjpa firmware because i don't want to use my phone with enabled roaming options.
hey um i'm having the same problem and thought replying here would be better than starting a new thread.
well i installed the rom without having any idea of what i was doing *stupid idea* so i didn't take note of my original firmware.
i didn't use odin to install the rom just clockwork recovery and the rom and everything installed fine except my data network. i can get signal, call, receive the only problem is i get no data transfer. any help much appreciated. if anything can someone help me step by step to reboot my phone to original?
just for future travellers
Sadly this isn't my own gem, but yeah. hold the power button down, wait for the shutdown menu, above the airplane mode there is a data network button, and it'll most likely say "de-activated" if nothing else has worked. Its ok to feel like a chump, I did after rehashing the hell out of this phone for a few days ( the wifes phone, my phone does exactly what its told. )
Anyway, yeah, this will probably be the reason for the lack of the icon "G", "3G" or "H" where it should be.
Dave.

Galaxy S - no signal

After factory data reset phone can't see GSM network and can't register. It says NO SERVICE. SIM card ok. check at another phone. What can be a problem and how to fix it?
Some info below:
fw: 2.1update1
baseband i9000xxjf5
kernel 2.6.29
build ECLAIR.XWJF7
csc i9000serjf2
p code: gt-i9000hkxbri
Have you checked your APN settings?
I can't make even phone call. APN...What to check in particular? wifi and gps are working fine. tried service mode... it says signal strength 0db.
My wifes is the same way it cant lock on a service provider after factory restore only way it works is with a custom rom cant figure it out
Contact your network and enter mobile network settings manually .
jje
flash to custom rom maybe?
it's your APN settings
just google your APN settings... i.e. i'm with Bell mobility... if I google Bell APN I will find the info I need... that data goes into settings>wireless>mobile networks>access point names
hit the menu button and add apn.... bell's examples are here http://androidforums.com/samsung-i7500/87145-bell-mobility-apn.html
they are carrier specific obviously
Hi All,
This happened to me before and I was as frustrated as you and when I was about to give up, I tried one last restoration, but only this time I did it correctly. After that, I restored 5 different versions of Samsung Galaxy S stock ROM back to my Samsung Galaxy S. One of these versions were Chinese, and everything was in Chinese.
Samsung Galaxy S had no signal was because the modem file was missing while you were performing the restoration.
Now, all you have to do is go to this page and follow the instructions to restore the Stock ROM back to your Samsung Galaxy S.
You can try to install a different rom just in case. I had the same problem and i tried to fix it applying different modems but that wouldnt work so i ended flashing cyanogenmod and back to another custom rom and that did the trick.
Even flashing back to the latest official rom for my country and operator.
Tapatalk

Emergency call only

Strange behaviour. Yesterday the phone worked correctly (on jellyblast rom and savie kernel). Today stopped to go ("emergency calls only"). So I tried every type of wipe (/cache /date /dalvik), to fix the permissions, to flash a stock rom with odin (from this forum) and finally to change the rom (I tested creed... I think I'll keep, if the phone works). To reset the APNs and to to install ITV CSCs (after stock installation). Nothing. Everything else seems to work. Also if i put another SIM into the phone (Wind IT e TIM sims work). It could be a carrier problem? (it's a virtual carrier under Vodafone IT). I'm trying a nandroid (which carries a bit of dead bodies of flashes)
Raffhell said:
Strange behaviour. Yesterday the phone worked correctly (on jellyblast rom and savie kernel). Today stopped to go ("emergency calls only"). So I tried every type of wipe (/cache /date /dalvik), to fix the permissions, to flash a stock rom with odin (from this forum) and finally to change the rom (I tested creed... I think I'll keep, if the phone works). To reset the APNs and to to install ITV CSCs (after stock installation). Nothing. Everything else seems to work. Also if i put another SIM into the phone (Wind IT e TIM sims work). It could be a carrier problem? (it's a virtual carrier under Vodafone IT). I'm trying a nandroid (which carries a bit of dead bodies of flashes)
Click to expand...
Click to collapse
its a sim card problem. visit your dealer and get it replaced
Have patience brother. Might be a network problem only. Try going to flight mode then deactivate again.
Sent from my GT-S5360 using xda premium
I hope fix the network soon (however is strange that the SIM WORKS in a nokia 1112 lol). In any case I've to talk with the revendor (postal office).
It's very probably is a sim problem... Neither the airplane mode seems to work...
*edit*
Yesterday, in android setting I saw Vodafone IT -79dBm signal (correct?); today I saw TIM IT (is not my carrier), -73dBm (edge only but doesn't work)
I noticed a strange other thing... I haven't /csc folder with ITV (maybe due nandroid with no EU-Rom). I'm trying to re-put in it (by other nandroid) and /efs is empty (never caused problems, however), and I today I'll go to ask sim replacement (as other works)
*RE-EDIT*
Nope. I replaced SIM. Still happens... Works on another phone but not on mine. Another SIM of another operator WORKS. So I'm trying another one firmware (XXLK3_XEULL1_XXLK3) that seems to be the most near to my phone default.. we'll see...
Still doesn't work =( Same problems
....maybe with a Vodafone only CSCs?
I don't know what to try (If won't work I'll change operator..again) =(
Raffhell said:
Still doesn't work =( Same problems
....maybe with a Vodafone only CSCs?
I don't know what to try (If won't work I'll change operator..again) =(
Click to expand...
Click to collapse
Reflash a stock rom and then try..!
aniket.lamba said:
Reflash a stock rom and then try..!
Click to expand...
Click to collapse
Already did it =(
Flashed severals stock roms of galaxy y thread...
Other sims works, mine no (already replaced to exclude the possibility of damaged sim)
Raffhell said:
Already did it =(
Flashed severals stock roms of galaxy y thread...
Other sims works, mine no (already replaced to exclude the possibility of damaged sim)
Click to expand...
Click to collapse
Select the correct location before flashing, csc matters
Sent from my GT-S5360 using xda app-developers app
Go to your service centre
Hit like if i helped you
Raffhell said:
Strange behaviour. Yesterday the phone worked correctly (on jellyblast rom and savie kernel). Today stopped to go ("emergency calls only"). So I tried every type of wipe (/cache /date /dalvik), to fix the permissions, to flash a stock rom with odin (from this forum) and finally to change the rom (I tested creed... I think I'll keep, if the phone works). To reset the APNs and to to install ITV CSCs (after stock installation). Nothing. Everything else seems to work. Also if i put another SIM into the phone (Wind IT e TIM sims work). It could be a carrier problem? (it's a virtual carrier under Vodafone IT). I'm trying a nandroid (which carries a bit of dead bodies of flashes)
Click to expand...
Click to collapse
Install GALAXY TOOLBOX from Google Play and follow instructions on the app.. this may help
DroidFolks said:
Install GALAXY TOOLBOX from Google Play and follow instructions on the app.. this may help
Click to expand...
Click to collapse
Ok, I'll try.....
Tried already with several stock firmwares (with correct csc). Nothing..
A strange thing is how the cell is recognized on google play/Kies: it says Vodafone GT-5360 and doesn't work with Vodafone or Tim (but works perfectly on Wind) ..... but it's an unbranded phone and however worked with other operators....
*edit*
I haven't anything in /efs (don't know If I used to have something in it) but phone still "works", and my imei is the same on the box (so nothing of illegal, I hope). I need a tool for that? Can interfere with mobile signal?
Galaxy toolbox generated a file of 1024kb named efspart.img.save (doesn't open) which I've restored... (?)
Now, when phone starts, I sees an android.phone stopped to work..... Can be useful to push it from adb; how? (I read something about it somewhere on xda, but I want to be sure it's useful to do it)
I noticed another strange habit.
When I'm covered by 3G (WCDMA?) phone works well (I've wifi, data, network operator); when I'm not, as is locked on WCMDA only (why?), I can't phone (emergency call) but the data packets still works (so isn't a network problem, it is?); I can't select in phone info (dialer mode) the GSM Auto(PRL) which seems to be 2g preferred (I think I'd resolve setting this).
There's a manual configuration to force the parameter? Now I'm on stock rom and stock kernel, but the signal fly away sometimes
thats a provider maybe
Raffhell said:
I noticed another strange habit.
When I'm covered by 3G (WCDMA?) phone works well (I've wifi, data, network operator); when I'm not, as is locked on WCMDA only (why?), I can't phone (emergency call) but the data packets still works (so isn't a network problem, it is?); I can't select in phone info (dialer mode) the GSM Auto(PRL) which seems to be 2g preferred (I think I'd resolve setting this).
There's a manual configuration to force the parameter? Now I'm on stock rom and stock kernel, but the signal fly away sometimes
Click to expand...
Click to collapse
after flashing stock rom try *#272*your imei# may be this will help to correct your csc
sangalaxy said:
after flashing stock rom try *#272*your imei# may be this will help to correct your csc
Click to expand...
Click to collapse
i'm on the same problem here ...
I tried the 272 code, and it shows me that I have a ZTA vendor code available, and an option to 'install it'. the phone reboots, clean the cache and resets. may be an rewrite on the CSC sector. question is: my SIM is ok, and my phone started to behave just as described.
I'm trying to figure out here too.
regards.
Suicide.Phenom said:
thats a provider maybe
Click to expand...
Click to collapse
Nope, it's the only operator which works with the phone (maybe damaged but out of warranty), no sim problems in other phones both in 2g and 3g; csc already done; but it goes in wcdma preferred (i want force gms auto but I can't select it in dialer mode... only wcdma and unknown) and 3g data connections works with emergency call mode(??)
Raffhell said:
Nope, it's the only operator which works with the phone (maybe damaged but out of warranty), no sim problems in other phones both in 2g and 3g; csc already done; but it goes in wcdma preferred (i want force gms auto but I can't select it in dialer mode... only wcdma and unknown) and 3g data connections works with emergency call mode(??)
Click to expand...
Click to collapse
Before flashing stock try formatting everything system,data,cache,and dalvik using cwm and flash it with the correct stock may be helps
And flash the stock checking with your baseband
sangalaxy said:
And flash the stock checking with your baseband
Click to expand...
Click to collapse
I've:
PDA S5360XXLK3
PHONE S5360XXLK3
CSC S5360ITVLL2
It seems to be correct.. I can force "2g preferred" in some manner editing a file?
However, I'll try various wiping/flashing =(
Now I'm on stock rom (odexed) and kuro kernel (which works on stock), the issue doesn't happen often now ... (When happens, I've to disable radio and then switch from 3g preferred (I can't choose 2g preferred) or 2g only (if I'm on it) and then re-enable radio. In worst case (very rare, NOW) I've to reboot.
Now, seems to works the sim which didn't work when I made the topic (great step ahead ^^)

GT-i9505 No mobile network/data after flashing custom ROM

Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
samersh72 said:
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
Click to expand...
Click to collapse
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
somepepe**** said:
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
Click to expand...
Click to collapse
and reflash the custom rom after flashing the modem
samersh72 said:
and reflash the custom rom after flashing the modem
Click to expand...
Click to collapse
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
going out now for a while but thought id ask - do you think that installing official stock rom (perhaps from your s4 unrooting guide) would help flashed via odin? from searching i can see that some folk suggest that stock will reinstall everything i need...im hoping so, i really wouldnt mind going back to stock, anythings better than this
somepepe**** said:
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
Click to expand...
Click to collapse
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
samersh72 said:
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
Click to expand...
Click to collapse
yes put it in "phone" mode, thats the second or third one i have flashed now so im not sure it wont help but for sure ill try again!
are you able to determine that its not corrupted? would it state as such if it were? im going to flash a stock firmware as a last resort. lost after that haha
edit - installed cwm using sgs4 flasher and re-installed my custom rom and gapps, booted no probs and network now working - sorted!! thanks for your help i dont think i would have reflashed the rom without your advice to do so
So I'm practically in the same boat. I'm currently on P.A.C. man nightly 09/18 (Vodafone Germany branded device). I never had similar problems, but now I can't call (or be called) and I'm not able to use mobile data.
I nearly tried everything:
1) I checked the IMEI (saved it before switching over to custom roms), but an IMEI number is still there.
2) Went back to stock to see if it's a problem of P.A.C. man ROMS or not. On stock it didn't work either.
3) Went back to P.A.C. man ROM and flashed modem XXUBMF8 via Odin 3.04 (from this thread: http://forum.xda-developers.com/showthread.php?t=2192025)
4) Flashed the modem again after I flashed the ROM because it didn't work either.
So I'm completely lost now, I really don't know what to do next. I had mobile data for a couple of seconds every now and then, but nothing stable. And since the problem came up (yesterday evening) I can not make any calls at all.
Can someone help me?
Edit: The very strange thing is that I have full reception balks in the notification area (only in grey). But still, I guess this means that the device is somehow able to detect a signal but can not connect to it?
Edit2: I apparently have no Device-ID. May that be a problem?
So I took some screenshots to show you guys my problem a bit better. For some reason my mobile data now works (currently HSPA, but it's extremely slow). But I still can't make any calls (or get called too). =/
Edit: So to sum this up: the strangest thing about this problem is, that even when I go back to full stock I can't make calls. =/ What could be the problem? An IMEI number is present in the settings (althouh the 'IMEI SV' under 'About phone' --> 'Status' was one digit below the current one that I can see under those stats). The whole problem makes me believe that my provider can't sort my phone number to my device (I'm on Vodafone; but if that's really the case: why the hell does mobile data works sometimes?!). The other possibility: something with the modem/radio is broken. Could this be the problem? The thing is that I also tried to flash a custom modem, but the problem is still there...
I'm really concerned that my phone just became an expensive paperweight
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your answer!
You also flashed a different modem didn't you? Did this help or was it only the custom recovery? I'm confused because I used CWM before and never had problems. But then this mess all came up...
Yes I flashed several modems, that didn't help..only using a different custom recovery to flash my custom Rom again helped..hope you get sorted!
Sent from my GT-I9505 using xda app-developers app
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Gotcher said:
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Click to expand...
Click to collapse
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
soyusado said:
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
Click to expand...
Click to collapse
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Install stock ROM
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Mate you should try installing Stock ROM that might help I think !
.::Alien::. said:
Mate you should try installing Stock ROM that might help I think !
Click to expand...
Click to collapse
I tried that already, but it didn't help. Same problem...
I factory resetted the phone, wiped cache and dalvik cache and then flashed my Vodafone branded stock ROM via Odin that I had on my device when I got it. Didn't help for some reason... But: should I also try to go back to stock ROM via KIES? I haven't tried this method until now...
Edit: About my flashing method: I went from the stock ROM to rooted (via CF Auto root with Odin). For PAC I then flashed TWRP 2.6.0 and then in recovery factory resetted the phone, wiped cache and dalvik and then installed PAC. After that I installed GApps. I used this method before and it worked without any problems...
Edit2: I found this thread, it appears to be the same/a similar problem with the S3: http://forum.xda-developers.com/showthread.php?t=1805709&page=6
Now is there something similar for the S4? I think I tried calling ##72786# on stock ROM and it didn't work...
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Delete the unused APNs.
Do you have mobile data?
Also I asume that you're running the latest vertigo's build, because with me GSM/WCDMA/LTE is always selected.
Sent from my GT-I9505 using Tapatalk 4
Sometimes I have mobile data, but only for very limited time; for the majority of time, I don't have mobile data and can not make calls.
I also tried to delete the unused APNs, but still no change =/
I tried to use a different Micro SIM in this device, but the same problem appears. No data, no phone although I have grey reception balks.
any update on this one?!

software unlock

I did the software unlock via the dial code & UMTS menu, I can make phone calls with a different carrier sim, but I cannot get the data to connect. I have been searching xda and google for months trying to get this to work. I have a Canadian Bell mobilty i337m. Stock rom (mdj) and its rooted. I have tried factory reset several times but it doesnt fix it. I also tried flashing back to stock with odin. Does anyone have any other ideas?
When I try a telus (or other provider) sim, it give me voice service only and in the about > status menu the mobile network state either says disconnected or connecting. I have the data toggle on also.
Those unlocks don't work that well with the Canadian variants. They're designed for the i337 not the i337m.
Have you made sure the apn is set up right for the carrier?
Maybe this will help
Code:
http://apn-settings.com/canada/apn-settings-bell-mobility/
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ve6ay said:
Those unlocks don't work that well with the Canadian variants. They're designed for the i337 not the i337m.
Click to expand...
Click to collapse
ksj0823 said:
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Not true. I successfully unlocked my first S4 I337M on Bell following this tutorial. I sold that one because I was able to make a profit once I unlocked and flashed the AWS mod to make it compatible with WIND and Mobilicity.
simplywinter said:
I did the software unlock via the dial code & UMTS menu, I can make phone calls with a different carrier sim, but I cannot get the data to connect. I have been searching xda and google for months trying to get this to work. I have a Canadian Bell mobilty i337m. Stock rom (mdj) and its rooted. I have tried factory reset several times but it doesnt fix it. I also tried flashing back to stock with odin. Does anyone have any other ideas?
When I try a telus (or other provider) sim, it give me voice service only and in the about > status menu the mobile network state either says disconnected or connecting. I have the data toggle on also.
Click to expand...
Click to collapse
Try reflashing the original 4.2.2 firmware from here and then immediately follow this tutorial before rooting (do not install any system updates!). Then you can root, install custom recovery, reset the flash count, etc.
All questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNM
MrKhozam said:
Not true. I successfully unlocked my first S4 I337M on Bell following this tutorial. I sold that one because I was able to make a profit once I unlocked and flashed the AWS mod to make it compatible with WIND and Mobilicity.
Try reflashing the original 4.2.2 firmware from here and then immediately follow this tutorial before rooting (do not install any system updates!). Then you can root, install custom recovery, reset the flash count, etc.
Click to expand...
Click to collapse
You did exactly what I am in the process of doing. I will try what you suggested now. Thanks!
Also, ive manually inputed apns for telus and eastlink and neither seem to work. I can always make voice calls, but the data will not connect.
ksj0823 said:
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
oddly enough, when I put a telus sim in it and waited for a while (in hopes it would eventually connect to data) and the apn settings for telus were in the phone. I know I didnt put them there because the apn settings for koodo were also present along with a third apn that I cant remember.
For future reference, try not to double post. Just edit your current post.
simplywinter said:
oddly enough, when I put a telus sim in it and waited for a while (in hopes it would eventually connect to data) and the apn settings for telus were in the phone. I know I didnt put them there because the apn settings for koodo were also present along with a third apn that I cant remember.
Click to expand...
Click to collapse
It's actually not an odd thing to happen. Once an activated SIM is inserted and the phone is unlocked, the phone searches for the best APN settings from all compatible carrier bundles. Some phones do this more accurately than others. However, it may not do this well enough if a custom ROM is installed. I know this to be true because this happened with my older Galaxy S3 when I tried selling it to someone (it was a T-Mobile unlocked running CM 10.0 at the time). However, setting the APN manually (assuming all settings are correct and that nothing else is wrong with the phone) should resolve your issues.
If you're still having problems, I suggest doing these things:
1. Try going into your network operators and let the phone search for carriers nearby. Once the list shows up, tap on Telus and wait until that screen closes on its own.
2. If you can't get data going yet, try disabling it, re-enabling, and reboot.
3. If this still doesn't work, try going into the network mode screen and select GSM/LTE and reboot.
4. If it's still derping on you, then it must either be your SIM not connecting to Telus's data network, or your account has a data block. That's all I can really think of.
Good luck.
MrKhozam said:
For future reference, try not to double post. Just edit your current post.
It's actually not an odd thing to happen. Once an activated SIM is inserted and the phone is unlocked, the phone searches for the best APN settings from all compatible carrier bundles. Some phones do this more accurately than others. However, it may not do this well enough if a custom ROM is installed. I know this to be true because this happened with my older Galaxy S3 when I tried selling it to someone (it was a T-Mobile unlocked running CM 10.0 at the time). However, setting the APN manually (assuming all settings are correct and that nothing else is wrong with the phone) should resolve your issues.
If you're still having problems, I suggest doing these things:
1. Try going into your network operators and let the phone search for carriers nearby. Once the list shows up, tap on Telus and wait until that screen closes on its own.
2. If you can't get data going yet, try disabling it, re-enabling, and reboot.
3. If this still doesn't work, try going into the network mode screen and select GSM/LTE and reboot.
4. If it's still derping on you, then it must either be your SIM not connecting to Telus's data network, or your account has a data block. That's all I can really think of.
Good luck.
Click to expand...
Click to collapse
Ok, reflashed stock 4.2.2 (the first one) and manually entered TELUS apn settings from the telus website, got data to connect finally. As a note, there was a typo in the apn settings that it auto aquired for telus. Going to try a eastlink sim tomorrow and hopefully AWS is working.
Edit: all seems to work. thanks everyone!!

Categories

Resources